Changing U-boot relocation addres to SRAM (instead of DRAM)

[Joakim Tjernlund]

On Mon, 2020-09-07 at 22:24 +0300, Yusuf Altıparmak wrote:
> CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
> 
> 
> Hello,
> 
> I want to modify U-boot to relocate itself to on-board SRAM of chip (T1042
> demo board) instead of DRAM.
> 
> At first, there is call list in u-boot/common/board_f.c and it has a line
> to call dram_init. I will change this line with my custom sram_init
> function.
> 
> [image: Capture.PNG]
> 
> The function board_f() is being called in start.S which is located at
> u-boot/arch/powerpc/cpu/mpc85xx/
> 
> start.S file also includes a region to relocate itself by changing Link
> Register. Code region is:
> 
> */**
> ** void relocate_code(addr_sp, gd, addr_moni)*
> ***
> ** This "function" does not return, instead it continues in RAM*
> ** after relocating the monitor code.*
> ***
> ** r3 = dest*
> ** r4 = src*
> ** r5 = length in bytes*
> ** r6 = cachelinesize*
> **/*
> *.globl relocate_code*
> *relocate_code:*
> *mr r1,r3 /* Set new stack pointer */*
> *mr r9,r4 /* Save copy of Init Data pointer */*
> *mr r10,r5 /* Save copy of Destination Address */*
> 
> *GET_GOT*
> *#ifndef CONFIG_SPL_SKIP_RELOCATE*
> *mr r3,r5 /* Destination Address */*
> *lis r4,CONFIG_SYS_MONITOR_BASE at h /* Source Address */*
> *ori r4,r4,CONFIG_SYS_MONITOR_BASE at l*
> *lwz r5,GOT(__init_end)*
> *sub r5,r5,r4*
> *li r6,CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */*
> 
> 
> My question is, in above code, how relocate_code() function is calculating
> the jump address of Link Register (CONFIG_SYS_MONITOR_BASE at h).
> 
> What should be done to change it to point SRAM of t1042 after we initialize
> it in board_init_f() function. ?

I don't think you should change anything here. Just make gd->relocaddr point to somewhere in SRAM

 Jocke