[PATCH v8 06/28] spi: cadence-qspi: Add a small delay before indirect writes

Pratyush Yadav p.yadav at ti.com
Thu Apr 1 21:31:11 CEST 2021


Once the start bit is toggled it takes a small amount of time before it
is internally synchronized. This means we can't start writing during
that part. So add a small delay to allow the bit to be synchronized.

Signed-off-by: Pratyush Yadav <p.yadav at ti.com>
---
 drivers/spi/cadence_qspi.c     | 4 ++++
 drivers/spi/cadence_qspi.h     | 1 +
 drivers/spi/cadence_qspi_apb.c | 6 ++++++
 3 files changed, 11 insertions(+)

diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c
index de7628de27..a961193cdc 100644
--- a/drivers/spi/cadence_qspi.c
+++ b/drivers/spi/cadence_qspi.c
@@ -20,6 +20,8 @@
 #include <linux/sizes.h>
 #include "cadence_qspi.h"
 
+#define NSEC_PER_SEC			1000000000L
+
 #define CQSPI_STIG_READ			0
 #define CQSPI_STIG_WRITE		1
 #define CQSPI_READ			2
@@ -208,6 +210,8 @@ static int cadence_spi_probe(struct udevice *bus)
 		priv->qspi_is_init = 1;
 	}
 
+	plat->wr_delay = 50 * DIV_ROUND_UP(NSEC_PER_SEC, plat->ref_clk_hz);
+
 	return 0;
 }
 
diff --git a/drivers/spi/cadence_qspi.h b/drivers/spi/cadence_qspi.h
index b06d7750e2..5c745541a6 100644
--- a/drivers/spi/cadence_qspi.h
+++ b/drivers/spi/cadence_qspi.h
@@ -27,6 +27,7 @@ struct cadence_spi_plat {
 	fdt_addr_t	ahbsize;
 	bool		use_dac_mode;
 	int		read_delay;
+	u32		wr_delay;
 
 	/* Flash parameters */
 	u32		page_size;
diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c
index b051f462ed..92e57730bd 100644
--- a/drivers/spi/cadence_qspi_apb.c
+++ b/drivers/spi/cadence_qspi_apb.c
@@ -730,6 +730,12 @@ cadence_qspi_apb_indirect_write_execute(struct cadence_spi_plat *plat,
 	writel(CQSPI_REG_INDIRECTWR_START,
 	       plat->regbase + CQSPI_REG_INDIRECTWR);
 
+	/*
+	 * Some delay is required for the above bit to be internally
+	 * synchronized by the QSPI module.
+	 */
+	ndelay(plat->wr_delay);
+
 	while (remaining > 0) {
 		write_bytes = remaining > page_size ? page_size : remaining;
 		writesl(plat->ahbbase, bb_txbuf, write_bytes >> 2);
-- 
2.30.0



More information about the U-Boot mailing list