April 2021 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu Apr 1 00:18:13 CEST 2021
Ending: Fri Apr 30 20:52:56 CEST 2021
Messages: 2442

• [PATCH 01/11] powerpc: dts: t2080: add QorIQ DPAA 1 FMan v3 nodes   Camelia Alexandra Groza (OSS)
• [PATCH 1/7] imx8mm_evk: switch to use binman to pack images   Peng Fan (OSS)
• [PATCH 2/7] doc: imx8mm_evk: update doc after using binman   Peng Fan (OSS)
• [PATCH 3/7] imx8mn-ddr4-evk: switch to use binman   Peng Fan (OSS)
• [PATCH 4/7] imx8mn-evk: switch to use binman   Peng Fan (OSS)
• [PATCH 5/7] doc: imx8mn_evk: update doc after using binman   Peng Fan (OSS)
• [PATCH 6/7] imx8mp-evk: switch to use binman   Peng Fan (OSS)
• [PATCH 7/7] doc: imx8mp-evk: update after using binman   Peng Fan (OSS)
• [NXP-IMX] please pull nxp-imx-2021-4-6   Peng Fan (OSS)
• [PATCH v2] mmc: mtk-sd: increase the minimum bus frequency   Peng Fan (OSS)
• [NXP-IMX V2] please pull nxp-imx-2021-4-6   Peng Fan (OSS)
• [NXP-IMX] please pull nxp-imx-2021-4-6   Peng Fan (OSS)
• [PATCH v2 1/5] arm64: dts: imx8mm: Add common -u-boot.dtsi   Peng Fan (OSS)
• [PATCH] imx: cmd: use struct cmd_tbl   Peng Fan (OSS)
• [PATCH 00/37] imx: add i.MX8ULP support   Peng Fan (OSS)
• [PATCH 01/37] arm: imx: add i.MX8ULP basic Kconfig option   Peng Fan (OSS)
• [PATCH 02/37] arm: imx: add i.MX8ULP cpu type and helper   Peng Fan (OSS)
• [PATCH 03/37] arm: imx: sys_proto: move boot mode define to common header   Peng Fan (OSS)
• [PATCH 04/37] arm: imx8ulp: support print cpu info   Peng Fan (OSS)
• [PATCH 05/37] imx: imx8ulp: add get reset cause   Peng Fan (OSS)
• [PATCH 06/37] arm: imx: basic i.MX8ULP support   Peng Fan (OSS)
• [PATCH 07/37] arm: imx8: Move container parser and image to mach-imx common folder   Peng Fan (OSS)
• [PATCH 08/37] arm: imx8: Move container image header file to mach-imx   Peng Fan (OSS)
• [PATCH 09/37] arm: imx: parse-container: guard included header files   Peng Fan (OSS)
• [PATCH 10/37] arm: imx8ulp: add container support   Peng Fan (OSS)
• [PATCH 11/37] arm: imx: move container Kconfig under mach-imx   Peng Fan (OSS)
• [PATCH 12/37] driver: misc: Add MU and S400 API to communicate with Sentinel   Peng Fan (OSS)
• [PATCH 13/37] net: fec_mxc: support i.MX8ULP   Peng Fan (OSS)
• [PATCH 14/37] pinctrl: Add pinctrl driver for imx8ulp   Peng Fan (OSS)
• [PATCH 15/37] driver: serial: fsl_lpuart: support i.MX8ULP   Peng Fan (OSS)
• [PATCH 16/37] arm: imx8ulp: add clock support   Peng Fan (OSS)
• [PATCH 17/37] drivers: mmc: fsl_esdhc_imx: support i.MX8ULP   Peng Fan (OSS)
• [PATCH 18/37] arm: imx8ulp: soc: Change to use CMC1 to get bootcfg   Peng Fan (OSS)
• [PATCH 19/37] arm: imx8ulp: Enable full L2 cache in SPL   Peng Fan (OSS)
• [PATCH 20/37] arm: imx8ulp: disable wdog3   Peng Fan (OSS)
• [PATCH 21/37] arm: imx8ulp: Update the reset vector in u-boot   Peng Fan (OSS)
• [PATCH 22/37] drivers: misc: s400_api: Update S400_SUCCESS_IND to 0xd6   Peng Fan (OSS)
• [PATCH 23/37] drivers: misc: imx8ulp: Add S400 API for image authentication   Peng Fan (OSS)
• [PATCH 24/37] drivers: misc: imx8ulp: Update S400 API for release RDC   Peng Fan (OSS)
• [PATCH 25/37] drivers: misc: s400_api: Update API for fuse read and write   Peng Fan (OSS)
• [PATCH 26/37] arm: imx8ulp: release and configure XRDC at early phase   Peng Fan (OSS)
• [PATCH 27/37] arm: imx8ulp: add xrdc support   Peng Fan (OSS)
• [PATCH 28/37] arm: imx8ulp: add trdc release request   Peng Fan (OSS)
• [PATCH 29/37] arm: imx8ulp: release trdc and assign lpav from RTD to APD   Peng Fan (OSS)
• [PATCH 30/37] arm: imx8ulp: Probe the S400 MU device in arch init   Peng Fan (OSS)
• [PATCH 31/37] arm: iMX8ULP: Add boot device relevant functions   Peng Fan (OSS)
• [PATCH 32/37] arm: imx8ulp: Allocate DCNANO and MIPI_DSI to AD domain   Peng Fan (OSS)
• [PATCH 33/37] arm: imx8ulp: add dummy imx_get_mac_from_fuse   Peng Fan (OSS)
• [PATCH 34/37] arm: imx8ulp: add iomuxc support   Peng Fan (OSS)
• [PATCH 35/37] driver: misc: imx8ulp: Add fuse driver for imx8ulp   Peng Fan (OSS)
• [PATCH 36/37] arm: dts: add i.MX8ULP dtsi   Peng Fan (OSS)
• [PATCH 37/37] arm: imx: add i.MX8ULP EVK support   Peng Fan (OSS)
• [NXP-IMX] Please pull nxp-imx-4-23-2021   Peng Fan (OSS)
• [PATCH 37/37] arm: imx: add i.MX8ULP EVK support   Peng Fan (OSS)
• [PATCH] efi_loader: loosen buffer parameter check in efi_file_read_int   Peng Fan (OSS)
• [PATCH V2] efi_loader: loosen buffer parameter check in efi_file_read_int   Peng Fan (OSS)
• [PATCH 2/2] Rename CONFIG_DM_RESET to CONFIG_RESET   Priyanka Jain (OSS)
• [PATCH v2 4/4] sandbox: enable IRQ using select for sandbox architecture   Wasim Khan (OSS)
• [PATCH V2 24/24] ARM: imx8m: verdin-imx8mm: Enable USB Host support   Ying-Chun Liu (PaulLiu)
• [PATCH] usb: ehci-mx6: Limit PHY address parsing to !CONFIG_PHY   Ying-Chun Liu (PaulLiu)
• Pull request: rockchip-for-v2021.07   Arnaud Patard (Rtp)
• [PATCH] arm64: dts: meson: fix PHY deassert timing requirements   Stefan Agner
• [PATCH] arm64: dts: meson: fix PHY deassert timing requirements   Stefan Agner
• [PATCH] arm64: dts: meson: fix PHY deassert timing requirements   Stefan Agner
• [PATCH] arm64: dts: meson: odroidc2: readd PHY reset properties   Stefan Agner
• [PATCH v2] arm64: dts: meson: odroidc2: readd PHY reset properties   Stefan Agner
• [PATCH 11/13] board: synquacer: Add DeveloperBox 96boards EE support   Takahiro Akashi
• [PATCH 11/13] board: synquacer: Add DeveloperBox 96boards EE support   Takahiro Akashi
• [PATCH 11/13] board: synquacer: Add DeveloperBox 96boards EE support   Takahiro Akashi
• [PATCH v2 12/13] doc: qemu: arm64: Fix the documentation of capsule update   Takahiro Akashi
• [PATCH v2 12/13] doc: qemu: arm64: Fix the documentation of capsule update   Takahiro Akashi
• Possible USB Mass Storage bug on Xilinx's Zynq   Bruno L. Albrecht
• Possible USB Mass Storage bug on Xilinx's Zynq   Bruno L. Albrecht
• [PATCH v8 03/28] spi: spi-mem: export spi_mem_default_supports_op()   Sean Anderson
• [PATCH v8 01/28] spi: spi-mem: allow specifying whether an op is DTR or not   Sean Anderson
• [PATCH v8 00/28] mtd: spi-nor-core: add xSPI Octal DTR support   Sean Anderson
• [PATCH v8 02/28] spi: spi-mem: allow specifying a command's extension   Sean Anderson
• [PATCH v8 04/28] spi: spi-mem: add spi_mem_dtr_supports_op()   Sean Anderson
• [RFC PATCH v4 1/2] arch: riscv: cpu: Add callback to init each core   Sean Anderson
• [PATCH v6 0/6] wdt: Add support for watchdogs on Kendryte K210   Sean Anderson
• [PATCH v2 00/10] spi: dw: Add support for DUAL/QUAD/OCTAL modes   Sean Anderson
• [PATCH v2 01/10] mtd: spi-mem: Export spi_mem_default_supports_op   Sean Anderson
• [PATCH v2 02/10] spi: spi-mem: Add debug message for spi-mem ops   Sean Anderson
• [PATCH v2 03/10] spi: dw: Log status register on timeout   Sean Anderson
• [PATCH v2 04/10] spi: dw: Actually mask interrupts   Sean Anderson
• [PATCH v2 05/10] spi: dw: Switch to capabilities   Sean Anderson
• [PATCH v2 06/10] spi: dw: Rewrite poll_transfer logic   Sean Anderson
• [PATCH v2 07/10] spi: dw: Add ENHANCED cap   Sean Anderson
• [PATCH v2 08/10] spi: dw: Define registers for enhanced mode   Sean Anderson
• [PATCH v2 09/10] spi: dw: Support enhanced SPI   Sean Anderson
• [PATCH v2 10/10] spi: dw: Support clock stretching   Sean Anderson
• [PATCH v2 00/10] spi: dw: Add support for DUAL/QUAD/OCTAL modes   Sean Anderson
• [BUG] MMC support on MaixDuino   Sean Anderson
• [PATCH v2 06/10] spi: dw: Rewrite poll_transfer logic   Sean Anderson
• [PATCH v8 01/28] spi: spi-mem: allow specifying whether an op is DTR or not   Sean Anderson
• [PATCH v8 04/28] spi: spi-mem: add spi_mem_dtr_supports_op()   Sean Anderson
• [PATCH v8 00/28] mtd: spi-nor-core: add xSPI Octal DTR support   Sean Anderson
• Locking down U-Boot env with ENV_WRITEABLE_LIST   Sean Anderson
• [NXP-IMX V2] please pull nxp-imx-2021-4-6   Sean Anderson
• [PATCH 02/16] timer: imx-gpt: Add timer support for i.MX SoCs family   Sean Anderson
• [PATCH 1/2] net: fec: Don't use disabled phys   Sean Anderson
• [PATCH 2/2] net: fec: Only unregister MII bus if we registered it   Sean Anderson
• [PATCH] dm: core: Fix uninitialized return value from dm_scan_fdt_node   Sean Anderson
• [PATCH v3 00/11] riscv: k210: Enable use of AI ram bank   Sean Anderson
• [PATCH v3 01/11] clk: Warn on failure to assign rate   Sean Anderson
• [PATCH v3 02/11] clk: k210: Fix PLLs not being enabled   Sean Anderson
• [PATCH v3 03/11] clk: k210: Fix PLL enable always getting taken   Sean Anderson
• [PATCH v3 04/11] clk: k210: Remove k210_register_pll   Sean Anderson
• [PATCH v3 05/11] clk: k210: Move the clint clock to under aclk   Sean Anderson
• [PATCH v3 06/11] clk: Add support for the k210 clock driver pre-relocation   Sean Anderson
• [PATCH v3 07/11] riscv: Enable some devices pre-relocation   Sean Anderson
• [PATCH v3 08/11] riscv: Enable AI ram on K210   Sean Anderson
• [PATCH v3 09/11] riscv: k210: Rename airam to aisram   Sean Anderson
• [PATCH v3 10/11] riscv: k210: Use AI as the parent clock of aisram, not PLL1   Sean Anderson
• [PATCH v3 11/11] riscv: Don't reserve AI ram in k210 dts   Sean Anderson
• [PATCH v3 05/11] clk: k210: Move the clint clock to under aclk   Sean Anderson
• [PATCH v3 05/11] clk: k210: Move the clint clock to under aclk   Sean Anderson
• [PATCH 1/4] command: Use a constant pointer for the help   Sean Anderson
• Running u-boot 2021.04 on Raspberry Pi 4   Sean Anderson
• [PATCH v1 1/2] cmd: bind: Fix driver binding on a device   Sean Anderson
• [RFC PATCH v4 1/2] arch: riscv: cpu: Add callback to init each core   Sean Anderson
• [RFC PATCH v4 1/2] arch: riscv: cpu: Add callback to init each core   Sean Anderson
• [PATCH 00/11] clk: k210: Rewrite K210 clock without CCF   Sean Anderson
• [PATCH 01/11] clk: Allow force setting clock defaults before relocation   Sean Anderson
• [PATCH 02/11] clk: k210: Rewrite to remove CCF   Sean Anderson
• [PATCH 03/11] clk: k210: Move pll into the rest of the driver   Sean Anderson
• [PATCH 04/11] clk: k210: Implement soc_clk_dump   Sean Anderson
• [PATCH 05/11] clk: k210: Re-add support for setting rate   Sean Anderson
• [PATCH 06/11] clk: k210: Don't set PLL rates if we are already at the correct rate   Sean Anderson
• [PATCH 07/11] clk: k210: Remove bypass driver   Sean Anderson
• [PATCH 08/11] clk: k210: Move k210 clock out of its own subdirectory   Sean Anderson
• [PATCH 09/11] k210: dts: Set PLL1 to the same rate as PLL0   Sean Anderson
• [PATCH 10/11] k210: Don't imply CCF   Sean Anderson
• [PATCH 11/11] test: Add K210 PLL tests to sandbox defconfigs   Sean Anderson
• [PATCH] checkpatch: Ignore ENOSYS warnings   Sean Anderson
• [PATCH] cmd: fs: Use part_get_info_by_dev_and_name_or_num to parse partitions   Sean Anderson
• [PATCH v2 1/3] cmd: fs: Use part_get_info_by_dev_and_name_or_num to parse partitions   Sean Anderson
• [PATCH v2 2/3] part: Fix bogus return from part_get_info_by_dev_and_name   Sean Anderson
• [PATCH v2 3/3] test: Add test for partitions   Sean Anderson
• [PATCH] checkpatch: Ignore ENOSYS warnings   Sean Anderson
• [RFC PATCH v4 1/2] arch: riscv: cpu: Add callback to init each core   Sean Anderson
• [RFC PATCH v4 1/2] arch: riscv: cpu: Add callback to init each core   Sean Anderson
• [PATCH v3] cmd: net: Add the "arp" command   Sean Anderson
• [PATCH v3] cmd: net: Add the "arp" command   Sean Anderson
• [PATCH v2] checkpatch: Ignore ENOSYS warnings   Sean Anderson
• [PATCH v2 3/3] test: Add test for partitions   Sean Anderson
• [PATCH 1/2] net: fec: Don't use disabled phys   Sean Anderson
• [PATCH v2 1/2] net: fec: Don't use disabled phys   Sean Anderson
• [PATCH v2 2/2] net: fec: Only unregister MII bus if we registered it   Sean Anderson
• Do make sense an u-boot installer?   Sean Anderson
• [RFC PATCH v4 1/2] arch: riscv: cpu: Add callback to init each core   Sean Anderson
• [PATCH] fastboot: Fix overflow when calculating chunk size   Sean Anderson
• [PATCH v2 00/10] spi: dw: Add support for DUAL/QUAD/OCTAL modes   Sean Anderson
• [PATCH] fastboot: Fix overflow when calculating chunk size   Sean Anderson
• Possible USB Mass Storage bug on Xilinx's Zynq   Sean Anderson
• [PATCH v3 5/5] test: Add gpio-sysinfo test   Sean Anderson
• [PATCH v4 0/5] sysinfo: Add gpio sysinfo driver   Sean Anderson
• [PATCH v4 1/5] dm: gpio: Fix gpio_get_list_count failing with livetree   Sean Anderson
• [PATCH v4 2/5] sysinfo: Use global sysinfo IDs for existing sysinfo drivers   Sean Anderson
• [PATCH v4 3/5] sysinfo: Require that sysinfo_detect be called before other methods   Sean Anderson
• [PATCH v4 4/5] sysinfo: Add gpio-sysinfo driver   Sean Anderson
• [PATCH v4 5/5] test: Add gpio-sysinfo test   Sean Anderson
• [PATCH] test: Alphabetize dm Makefile   Sean Anderson
• [PATCH v2 3/3] test: Add test for partitions   Sean Anderson
• [PATCH V2 01/24] phy: nop-phy: Add standard usb-nop-xceiv compat string   Sean Anderson
• [PATCH v2, 1/2] driver: watchdog: reset watchdog in designware_wdt_stop() function   Sean Anderson
• [PATCH v3,1/2] driver: watchdog: reset watchdog in designware_wdt_stop() function   Sean Anderson
• [PATCH 7/7] doc: imx8mp-evk: update after using binman   ZHIZHIKIN Andrey
• [PATCH] doc: Add build instructions for OP-TEE backed EFI variables   Ilias Apalodimas
• [PATCH] efi: Fix Kconfig dependency for EFI_TCG2_PROTOCOL   Ilias Apalodimas
• [PATCH] efi_loader: fix possible buffer overflow   Ilias Apalodimas
• [PATCH 2/2] efi_loader: add PE/COFF image measurement   Ilias Apalodimas
• [PATCH 1/1] tpm: missing event types   Ilias Apalodimas
• [PATCH 2/2] efi_loader: add PE/COFF image measurement   Ilias Apalodimas
• [PATCH] efi_loader: simplify tcg2_create_digest()   Ilias Apalodimas
• [RFC] efi_loader: improve firmware capsule authentication   Ilias Apalodimas
• [RFC] efi_loader: improve firmware capsule authentication   Ilias Apalodimas
• [PATCH] test/py: Fix efidebug related tests   Ilias Apalodimas
• [PULL u-boot] Please pull u-boot-amlogic-20210406   Neil Armstrong
• [PATCH RFT v2 0/4] pci: add common Designware PCIe functions and support Amlogic Meson PCIe controller   Neil Armstrong
• [PATCH] arm64: dts: meson: fix PHY deassert timing requirements   Neil Armstrong
• [PATCH] arm64: dts: meson: fix PHY deassert timing requirements   Neil Armstrong
• [PATCH] arm64: dts: meson: odroidc2: readd PHY reset properties   Neil Armstrong
• [PATCH RFT v2 0/4] pci: add common Designware PCIe functions and support Amlogic Meson PCIe controller   Neil Armstrong
• [PATCH 0/5] ARM: khadas-vim3: enable PCIe and NVMe   Neil Armstrong
• [PATCH 1/5] clk: meson-g12a: add PCIe gates   Neil Armstrong
• [PATCH 2/5] phy: meson-g12a-usb3-pcie: add support for PCIe ops   Neil Armstrong
• [PATCH 3/5] arm: dts: meson-khadas-vim3: enable PCIe in U-boot   Neil Armstrong
• [PATCH 4/5] configs: khadas-vim3: enable PCIe and NVMe   Neil Armstrong
• [PATCH 5/5] configs: meson64: add NVME boot target   Neil Armstrong
• [PATCH v2] arm64: dts: meson: odroidc2: readd PHY reset properties   Neil Armstrong
• [PATCH 0/5] ARM: khadas-vim3: enable PCIe and NVMe   Neil Armstrong
• [PATCH] boards: amlogic: update documentation for PCIe support   Neil Armstrong
• [PATCH] boards: amlogic: update documentation for PCIe support   Neil Armstrong
• [PULL u-boot] Please pull u-boot-amlogic-20210419   Neil Armstrong
• [PATCH 0/2] reset: fix reset_get_by_index_nodev index handling   Neil Armstrong
• [PATCH 1/2] test: reset: Extend base reset test to catch error   Neil Armstrong
• [PATCH 2/2] reset: fix reset_get_by_index_nodev index handling   Neil Armstrong
• [PATCH] ARM: dts: add missing -u-boot.dtsi to enable HDMI on Beelink GTKing/King-Pro   Neil Armstrong
• [PATCH] net: designware: fix PHY reset with DM_MDIO   Neil Armstrong
• [PATCH 1/8] ARM: meson: Sync Amlogic DT from Linux 5.12-rc2   Neil Armstrong
• [PATCH 2/8] net: designware: meson8b: add g12a compatible   Neil Armstrong
• [PATCH 3/8] ARM: meson-axg: remove local USB nodes   Neil Armstrong
• [PATCH 4/8] configs: meson64: add SCSI boot target   Neil Armstrong
• [PATCH 5/8] distro_bootcmd: run pci enum for scsi_boot just like it is done for nvme_boot   Neil Armstrong
• [PATCH 6/8] ARM: amlogic: add support for Odroid-HC4 device   Neil Armstrong
• [PATCH 7/8] doc: boards: amlogic: update for Odroid HC4   Neil Armstrong
• [PATCH 8/8] ARM: meson: add Beelink GS-King X board   Neil Armstrong
• [PATCH] net: designware: fix PHY reset with DM_MDIO   Neil Armstrong
• [PATCH 0/2] reset: fix reset_get_by_index_nodev index handling   Neil Armstrong
• [PULL u-boot] Please pull u-boot-amlogic-20210428   Neil Armstrong
• [PATCH] imx8mn_ddr4_evk: Allow booting the kernel by default   Stefano Babic
• [NXP-IMX] please pull nxp-imx-2021-4-6   Stefano Babic
• [PATCH v2 1/5] arm64: dts: imx8mm: Add common -u-boot.dtsi   Stefano Babic
• [PATCH 4/5] ARM: board: warp: convert to DM_USB   Stefano Babic
• [PATCH v6] imx: support for conga-QMX8 board   Stefano Babic
• [PATCH 31/37] crypto: caam: Add fsl caam driver   Stefano Babic
• [PATCH] ARM: imx: imx8mn-ddr4-evk: Add ethernet support   Stefano Babic
• [PATCH v2] imx: support i.MX8QM DMSSE20 a1 board   Stefano Babic
• [PATCH] board: novtech: meerkat96: Add environment variables   Stefano Babic
• Pull request: u-boot-imx u-boot-imx-20210409   Stefano Babic
• [PATCH 06/11] imx: ventana: convert U-Boot to OF_CONTROL using FIT image   Stefano Babic
• [PATCH 1/3] riscv: mpfs-icicle-kit: Increase SYS_MALLOC_F_LEN   Padmarao Begari
• [PATCH 2/3] clk: mpfs_clk: Enable DM_FLAG_PRE_RELOC flag   Padmarao Begari
• [PATCH 3/3] riscv: dts: mpfs-icicle-kit: Drop 'clock-frequency' in the uart nodes   Padmarao Begari
• [EXT] Re: [PATCH v1 2/5] net: phy: marvell: extend 88E2110 to use both 2.5GHz modes   Marek Behun
• [EXT] Re: [PATCH v1 2/5] net: phy: marvell: extend 88E2110 to use both 2.5GHz modes   Marek Behun
• [PATCH v1 00/23] phy: marvell: Sync Armada 3k/7k/8k SERDES code with Marvell version   Marek Behun
• imxrt1020 EVK u-boot doesn't run.   Giulio Benetti
• imxrt1020 EVK u-boot doesn't run.   Giulio Benetti
• [PATCH 1/3] board: freescale: imxrt1020-evk: fix console is not enabled while init dram   Giulio Benetti
• [PATCH 2/3] board: freescale: imxrt1050-evk: fix console is not enabled while init dram   Giulio Benetti
• [PATCH 3/3] board: st: stm32f746-disco: fix console is not enabled while init dram   Giulio Benetti
• imxrt1020 EVK u-boot doesn't run.   Giulio Benetti
• [PATCH v2] clk: fix clk_get_rate() documentation   Giulio Benetti
• imxrt1020 EVK u-boot doesn't run.   Giulio Benetti
• [PATCH 00/16] Fix i.MXRT1020/50   Giulio Benetti
• [PATCH 01/16] arm: imxrt: soc: make mpu regions generic   Giulio Benetti
• [PATCH 02/16] timer: imx-gpt: Add timer support for i.MX SoCs family   Giulio Benetti
• [PATCH 03/16] ARM: dts: imxrt1020: add alias to osc   Giulio Benetti
• [PATCH 04/16] ARM: dts: imxrt1020: add gpt1 node   Giulio Benetti
• [PATCH 05/16] ARM: dts: imxrt1020-evk: enable gpt1 timer   Giulio Benetti
• [PATCH 06/16] ARM: dts: imxrt1020-evk: set gpt1 as tick-timer for u-boot   Giulio Benetti
• [PATCH 07/16] ARM: dts: imxrt1020-evk-u-boot: make gpt1 present for SPL   Giulio Benetti
• [PATCH 08/16] ARM: dts: imxrt1020-evk: add device_type = "memory" to memory node   Giulio Benetti
• [PATCH 09/16] configs: imxrt1020-evk: enable imx gpt timer as tick-timer   Giulio Benetti
• [PATCH 10/16] ARM: dts: imxrt1050: add alias to osc   Giulio Benetti
• [PATCH 11/16] ARM: dts: imxrt1050: add gpt1 node   Giulio Benetti
• [PATCH 12/16] ARM: dts: imxrt1050-evk: enable gpt1 timer   Giulio Benetti
• [PATCH 13/16] ARM: dts: imxrt1050-evk: set gpt1 as tick-timer for u-boot   Giulio Benetti
• [PATCH 14/16] ARM: dts: imxrt1050-evk-u-boot: make gpt1 present for SPL   Giulio Benetti
• [PATCH 15/16] ARM: dts: imxrt1050-evk: add device_type = "memory" to memory node   Giulio Benetti
• [PATCH 16/16] configs: imxrt1050-evk: enable imx gpt timer as tick-timer   Giulio Benetti
• imxrt1020 EVK u-boot doesn't run.   Giulio Benetti
• [PATCH 02/16] timer: imx-gpt: Add timer support for i.MX SoCs family   Giulio Benetti
• [PATCH 02/16] timer: imx-gpt: Add timer support for i.MX SoCs family   Giulio Benetti
• [PATCH 0/5] Fix i.MXRT1050 hang on lcdif init and improve DT for mxsfb   Giulio Benetti
• [PATCH 1/5] video: mxsfb: add enabling of "axi" clock other than "per" clock   Giulio Benetti
• [PATCH 2/5] video: mxsfb: add enabling of "disp_axi" clock   Giulio Benetti
• [PATCH 3/5] clk: imx: clk-imxrt1050: introduce LCDIF_PIX and rename LCDIF to LCDIF_APB   Giulio Benetti
• [PATCH 4/5] ARM: dts: imxrt1050: move lcdif assigned clock to dtsi   Giulio Benetti
• [PATCH 5/5] ARM: dts: imxrt1050: set lcdif clocks according to mxsfb driver   Giulio Benetti
• [PATCH 0/5] Fix i.MXRT1050 hang on lcdif init and improve DT for mxsfb   Giulio Benetti
• [PATCH] patman: Parse checkpatch by message instead of by line   Evan Benn
• [PATCH] patman: Parse checkpatch by message instead of by line   Evan Benn
• [PATCH] patman: Parse checkpatch by message instead of by line   Evan Benn
• [PATCH 7/7] doc: imx8mp-evk: update after using binman   Peter Bergin
• [PATCH 01/19] phy: nop-phy: Add standard usb-nop-xceiv compat string   Harm Berntsen
• [PATCH v3 5/7] image-fdt: save no-map parameter of reserve-memory   Ard Biesheuvel
• [PATCH 1/2] of: addr: Abort address translation for parent nodes missing 'ranges'   Dario Binacchi
• [PATCH v3 00/12] Add support for pinmux status command on beaglebone   Dario Binacchi
• [PATCH v4 00/12] Add support for pinmux status command on beaglebone   Dario Binacchi
• [PATCH v4 01/12] pinctrl: single: fix format of structure documentation   Dario Binacchi
• [PATCH v4 02/12] pinctrl: single: fix the loop counter variable type   Dario Binacchi
• [PATCH v4 03/12] pinctrl: single: fix offset management   Dario Binacchi
• [PATCH v4 04/12] pinctrl: single: fix debug messages formatting   Dario Binacchi
• [PATCH v4 05/12] pinctrl: single: get register area size by device API   Dario Binacchi
• [PATCH v4 06/12] pinctrl: single: check "register-width" DT property   Dario Binacchi
• [PATCH v4 07/12] pinctrl: single: change function mask default value   Dario Binacchi
• [PATCH v4 08/12] pinctrl: single: add register access functions   Dario Binacchi
• [PATCH v4 09/12] pinctrl: single: add get_pins_count operation   Dario Binacchi
• [PATCH v4 10/12] pinctrl: single: add get_pin_name operation   Dario Binacchi
• [PATCH v4 11/12] pinctrl: single: add get_pin_muxing operation   Dario Binacchi
• [PATCH v4 12/12] test: pinmux: add test for 'pinctrl-single' driver   Dario Binacchi
• [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]   Dario Binacchi
• [PATCH] pinctrl: single: check function mask to be non-zero   Dario Binacchi
• [PATCH] pinctrl: single: fix a never true comparison   Dario Binacchi
• [PATCH v2] pinctrl: single: fix a never true comparison   Dario Binacchi
• [PATCH 0/5] Revert "fdt: translate address if #size-cells = <0>"   Dario Binacchi
• [PATCH 1/5] clk: ti: add custom API for memory access   Dario Binacchi
• [PATCH 2/5] clk: ti: change clk_ti_latch() signature   Dario Binacchi
• [PATCH 3/5] clk: ti: gate: use custom API for memory access   Dario Binacchi
• [PATCH 4/5] clk: ti: am3-dpll: use custom API for memory access   Dario Binacchi
• [PATCH 5/5] Revert "fdt: translate address if #size-cells = <0>"   Dario Binacchi
• [PATCH 1/5] clk: ti: add custom API for memory access   Dario Binacchi
• [PATCH 01/13] arm: nanopi2: Remove unused code   Stefan Bosch
• [PATCH v2 07/13] mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driver   Jassi Brar
• Running u-boot 2021.04 on Raspberry Pi 4   Matthias Brugger
• Running u-boot 2021.04 on Raspberry Pi 4   Matthias Brugger
• [PATCH 1/2] arm: dts: bcm283x: Add minimal smbios information   Matthias Brugger
• [PATCH] Add support for Raspberry Pi 3B+(32bit)   Matthias Brugger
• Ethernet Gadget on STM32MP1 not working   Patrice CHOTARD
• [PATCH v4 2/7] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750   Patrice CHOTARD
• [PATCH v4 3/7] ARM: dts: stm32: add new instances for stm32h743 MCU   Patrice CHOTARD
• [PATCH v4 4/7] ARM: dts: stm32: fix i2c node typo in stm32h743, update dmamux1 register   Patrice CHOTARD
• [PATCH v4 5/7] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6   Patrice CHOTARD
• [PATCH v4 6/7] ram: stm32: fix strsep failed on read only memory   Patrice CHOTARD
• [PATCH v4 7/7] board: Add rt-thread art-pi board support   Patrice CHOTARD
• [PATCH] stm32mp: stm32prog: add FIP header support   Patrice CHOTARD
• [PATCH 1/2] stm32mp: update uart number in trace of serial device not found   Patrice CHOTARD
• [PATCH 2/2] stm32mp: replace printf by log macro in setup_boot_mode   Patrice CHOTARD
• [PATCH] stm32mp1: remove the board_check_usb_power function when ADC is not activated   Patrice CHOTARD
• [PATCH v1 1/2] cmd: bind: Fix driver binding on a device   Patrice CHOTARD
• [PATCH v5 1/7] ARM: dts: stm32: split sdram pin & timing parameter into specific board dts   Patrice CHOTARD
• [PATCH v5 2/7] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750   Patrice CHOTARD
• [PATCH v5 3/7] ARM: dts: stm32: add new instances for stm32h743 MCU   Patrice CHOTARD
• [PATCH v5 4/7] ARM: dts: stm32: fix i2c node typo in stm32h743, update dmamux1 register   Patrice CHOTARD
• [PATCH v5 5/7] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6   Patrice CHOTARD
• [PATCH v5 6/7] ram: stm32: fix strsep failed on read only memory   Patrice CHOTARD
• [PATCH v5 7/7] board: Add rt-thread art-pi board support   Patrice CHOTARD
• [PATCH v3 1/8] ARM: dts: stm32: Add Engicam i.Core STM32MP1 SoM   Patrice CHOTARD
• [PATCH v3 2/8] ARM: dts: stm32: Add Engicam i.Core STM32MP1 1X4Gb DDR3   Patrice CHOTARD
• [PATCH v3 3/8] ARM: stm32: Imply SPL_SPI_LOAD   Patrice CHOTARD
• [PATCH v3 4/8] board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit   Patrice CHOTARD
• [PATCH v3 5/8] board: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0   Patrice CHOTARD
• [PATCH v3 6/8] ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 Micro SoM   Patrice CHOTARD
• [PATCH v3 7/8] board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board   Patrice CHOTARD
• [PATCH v3 8/8] board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF   Patrice CHOTARD
• [PATCH 1/3] configs: stm32mp1: stm32mp1: Increase SPL malloc() size   Patrice CHOTARD
• [PATCH 2/3] configs: stm32mp1: Remove misleading CONFIG_SPL_BSS_START_ADDR   Patrice CHOTARD
• [PATCH 3/3] configs: stm32mp1: Fix misleading SPL size limitations   Patrice CHOTARD
• [PATCH] stm32mp: stm32prog: add FIP header support   Patrice CHOTARD
• [PATCH 1/2] stm32mp: update uart number in trace of serial device not found   Patrice CHOTARD
• [PATCH 2/2] stm32mp: replace printf by log macro in setup_boot_mode   Patrice CHOTARD
• [PATCH v1 1/2] cmd: bind: Fix driver binding on a device   Patrice CHOTARD
• [PATCH v1 1/2] cmd: bind: Fix driver binding on a device   Patrice CHOTARD
• [PATCH V2] arm: stm32mp1: Set soc_type, soc_pkg, soc_rev env variables   Patrice CHOTARD
• [PULL] Pull request for u-boot master / v2021.07 = u-boot-stm32-20210409   Patrice CHOTARD
• [PATCH v1 1/2] cmd: bind: Fix driver binding on a device   Patrice CHOTARD
• [PATCH v1 1/2] cmd: bind: Fix driver binding on a device   Patrice CHOTARD
• [Uboot-stm32] [PATCH 1/2] cmd: pinmux: update result of do_status   Patrice CHOTARD
• [Uboot-stm32] [PATCH 2/2] cmd: pinmux: support pin name in status command   Patrice CHOTARD
• [Uboot-stm32] [PATCH] dfu: dfu_mtd: set max_buf_size to erasesize also for NOR devices   Patrice CHOTARD
• [PATCH] ARM: stm32: Enable UNZIP on DHSOM by default   Patrice CHOTARD
• [PATCH] ARM: stm32: Add additional ID register check for KSZ8851 presence   Patrice CHOTARD
• [PATCH] xhci-brcm.c compile errors: undefined reference to 'dev_err'   David Caputo
• [PATCH] dm: core: Add address translation in fdt_get_resource   Etienne Carriere
• [PATCH] lib/rsa: Use EVP_PKEY instead of RSA   Chan, Donald
• mkimage regression when building ARCH=mips defconfig Linux kernel   Nathan Chancellor
• [v1 03/17] arm: socfpga: Add handoff data support for Intel N5X device   Chee, Tien Fong
• [v1 10/17] arm: socfpga: Add SDRAM driver helper function for Intel N5X device   Chee, Tien Fong
• [v1 11/17] ddr: socfpga: Enable memory test on memory size less than 1GB   Chee, Tien Fong
• [v1 12/17] ddr: altera: Add SDRAM driver for Intel N5X device   Chee, Tien Fong
• [RFC PATCH v4 1/2] arch: riscv: cpu: Add callback to init each core   Rick Chen
• [PATCH 1/1] cmd/exception: support ebreak exception on RISC-V   Rick Chen
• [RFC PATCH v4 1/2] arch: riscv: cpu: Add callback to init each core   Rick Chen
• [RFC PATCH v4 1/2] arch: riscv: cpu: Add callback to init each core   Rick Chen
• [RFC PATCH v4 1/2] arch: riscv: cpu: Add callback to init each core   Rick Chen
• [RFC PATCH v4 1/2] arch: riscv: cpu: Add callback to init each core   Rick Chen
• [RFC PATCH v5 1/2] arch: riscv: cpu: Add callback to init each core   Rick Chen
• [RFC PATCH v5 2/2] board: sifive: unmatched: clear feature disable CSR   Rick Chen
• [PATCH v6 1/7] riscv: dts: add fu740 support   Rick Chen
• [PATCH v6 1/7] riscv: dts: add fu740 support   Rick Chen
• [RFC PATCH v6 1/2] arch: riscv: cpu: Add callback to init each core   Rick Chen
• [RFC PATCH v6 2/2] arch: riscv: cpu: fu740: clear feature disable CSR   Rick Chen
• [PATCH] atcspi200: Add timeout mechanism in spi_xfer()   Rick Chen
• [PATCH] pwm: sifive: make set_config() and set_enable() work properly   Vincent Chen
• [PATCH v1 0/2] cmd: bind: Fix driver binding   Patrice Chotard
• [PATCH v1 1/2] cmd: bind: Fix driver binding on a device   Patrice Chotard
• [PATCH v1 2/2] usb: gadget: Add bcdDevice for the DWC2 USB Gadget Controller   Patrice Chotard
• [PATCH v2 0/5] cmd: bind: Fix driver binding   Patrice Chotard
• [PATCH v2 1/5] cmd: bind: Fix driver binding on a device   Patrice Chotard
• [PATCH v2 2/5] usb: gadget: Add bcdDevice for the DWC2 USB Gadget Controller   Patrice Chotard
• [PATCH v2 3/5] usb: sandbox: Add gadget callbacks   Patrice Chotard
• [PATCH v2 4/5] configs: sandbox: add USB_ETHER and GADGET_DOWNLOAD gadget support   Patrice Chotard
• [PATCH v2 5/5] test/py: Add usb gadget binding test   Patrice Chotard
• [PATCH] reset: stm32: Fix bank and offset computation   Patrice Chotard
• [EXT] Re: [PATCH v1 2/5] net: phy: marvell: extend 88E2110 to use both 2.5GHz modes   Stefan Chulski
• [EXT] Re: [PATCH v1 2/5] net: phy: marvell: extend 88E2110 to use both 2.5GHz modes   Stefan Chulski
• [PATCH V2] doc: mmc man-page   Jaehoon Chung
• [PATCH V2] doc: mmc man-page   Jaehoon Chung
• [PATCH 3/8] ARM: odroid-xu3: Enable DM_ETH   Jaehoon Chung
• [PATCH 05/19] ARM: dts: imx8mm: Add power domain nodes   Jaehoon Chung
• [PATCH 06/19] imx: power-domain: Add fsl, imx8mm-gpc compatible string   Jaehoon Chung
• [PATCH 3/5] ARM: board: warp: convert to DM_MMC   Jaehoon Chung
• [PATCH] mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode   Jaehoon Chung
• [PATCH] mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode   Jaehoon Chung
• [PATCH] Revert "mmc: sdhci: set to INT_DATA_END when there are data"   Jaehoon Chung
• [PATCH] Revert "mmc: sdhci: set to INT_DATA_END when there are data"   Jaehoon Chung
• [PATCH resend] mmc: kconfig: Add CONFIG_SPL_MMC_VERBOSE   Jaehoon Chung
• [PATCH] mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode   Jaehoon Chung
• [PATCH 4/8] ARM: odroid: Enable DM_ETH   Jaehoon Chung
• [PATCH 15/17] x86: Check ROM exists before building vboot   Jaehoon Chung
• [PATCH] stm32mp1: remove the board_check_usb_power function when ADC is not activated   Jaehoon Chung
• [PATCH] power: regulator: Add support for regulator-force-boot-off   Jaehoon Chung
• [PATCH] power: regulator: Add support for regulator-force-boot-off   Jaehoon Chung
• [PATCH] power: regulator: Add support for regulator-force-boot-off   Jaehoon Chung
• [PATCH v2] power: regulator: Add support for regulator-force-boot-off   Jaehoon Chung
• [PATCH V2 08/24] imx: power-domain: Add fsl, imx8mm-gpc compatible string   Jaehoon Chung
• [PATCH V2 09/24] imx: power-domain: Add fsl, imx8mn-gpc compatible string   Jaehoon Chung
• [PATCH v2 07/13] mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driver   Jaehoon Chung
• [PATCH v2 07/13] mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driver   Jaehoon Chung
• [PATCH 2/2] drivers: mmc: add OpenPiton MMC support   Jaehoon Chung
• [PATCH V2 1/2] mmc: add OpenPiton mmc support   Jaehoon Chung
• [PATCH V2] doc: mmc man-page   Jaehoon Chung
• [PATCH v2 07/13] mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driver   Jaehoon Chung
• [PATCH V3 1/2] mmc: add OpenPiton mmc support   Jaehoon Chung
• [PATCH] mmc: dw_mmc: Fixes data read when receiving DTO interrupt in FIFO mode   Jaehoon Chung
• [PATCH] mmc: dwmmc: socfpga: Get "fifo-mode" property from DT   Jaehoon Chung
• [PATCH 0/4] board: fsl: lx2160ardb: add networking support for RevC   Ioana Ciornei
• [PATCH 1/4] board: fsl: lx2160ardb: add api for obtaining board revision   Ioana Ciornei
• [PATCH 2/4] board: fsl: lx2160ardb: add support for lx2160ardb revC board   Ioana Ciornei
• [PATCH 3/4] board: fsl: lx2160ardb: add dts fixup function for RevC   Ioana Ciornei
• [PATCH 4/4] board: fsl: lx2160ardb: add dts fixup for RevC   Ioana Ciornei
• [PATCH v2 0/4] board: fsl: lx2160ardb: add networking support for RevC   Ioana Ciornei
• [PATCH v2 1/4] board: fsl: lx2160ardb: add api for obtaining board revision   Ioana Ciornei
• [PATCH v2 2/4] board: fsl: lx2160ardb: add support for lx2160ardb revC board   Ioana Ciornei
• [PATCH v2 3/4] board: fsl: lx2160ardb: add dts fixup function for RevC   Ioana Ciornei
• [PATCH v2 4/4] board: fsl: lx2160ardb: add dts fixup for RevC   Ioana Ciornei
• [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]   Asherah Connor
• [U-Boot-Users] PPC405GP - uboot - can't get past stackloop   Katrina Copp
• [PATCH] scmi: translate the resource only when livetree is not activated   Patrick DELAUNAY
• [PATCH] dm: core: Add address translation in fdt_get_resource   Patrick DELAUNAY
• [PATCH v2 1/5] spl: mmc: Support OP-TEE payloads in Falcon mode   Patrick DELAUNAY
• [PATCH v2 2/5] spl: Introduce spl_board_prepare_for_optee() hook   Patrick DELAUNAY
• [PATCH v2 3/5] arm: stm32mp: Implement support for TZC 400 controller   Patrick DELAUNAY
• [PATCH v2 4/5] stm32mp1: spl: Configure TrustZone controller for OP-TEE   Patrick DELAUNAY
• [PATCH 3/3] configs: stm32mp1: Fix misleading SPL size limitations   Patrick DELAUNAY
• [PATCH 2/3] configs: stm32mp1: Remove misleading CONFIG_SPL_BSS_START_ADDR   Patrick DELAUNAY
• [PATCH 1/3] configs: stm32mp1: stm32mp1: Increase SPL malloc() size   Patrick DELAUNAY
• [PATCH v3 4/6] arm: stm32mp1: Implement ECDSA signature verification   Patrick DELAUNAY
• [PATCH V2] arm: stm32mp1: Set soc_type, soc_pkg, soc_rev env variables   Patrick DELAUNAY
• [PATCH] net: dwc_eth_qos: add support of device tree configuration for reset delay   Patrick DELAUNAY
• [PATCH v2 7/7] arm: cache: cp15: don't map the reserved region with no-map property   Patrick DELAUNAY
• [PATCH] net: dwc_eth_qos: add support of device tree configuration for reset delay   Patrick DELAUNAY
• [PATCH v7 0/8] Add FU740 chip and HiFive Unmatched board support   Palmer Dabbelt
• [PATCH v7 0/8] Add FU740 chip and HiFive Unmatched board support   Palmer Dabbelt
• [PATCH] stm32mp: stm32prog: add FIP header support   Patrick Delaunay
• [PATCH 1/2] stm32mp: update uart number in trace of serial device not found   Patrick Delaunay
• [PATCH 2/2] stm32mp: replace printf by log macro in setup_boot_mode   Patrick Delaunay
• [PATCH] dm: core: Add address translation in fdt_get_resource   Patrick Delaunay
• [PATCH] stm32mp1: remove the board_check_usb_power function when ADC is not activated   Patrick Delaunay
• [PATCH] net: dwc_eth_qos: add support of device tree configuration for reset delay   Patrick Delaunay
• [PATCH] board_f: cosmetic: change the debug trace to KB in reserve_video   Patrick Delaunay
• [PATCH 1/3] net: eth-phy: define LOG_CATEGORY   Patrick Delaunay
• [PATCH 2/3] net: dwc_eth_qos: define LOG_CATEGORY   Patrick Delaunay
• [PATCH 3/3] net: define LOG_CATEGORY   Patrick Delaunay
• [PATCH v2 0/6] net: dwc_eth_qos: add support of device tree configuration for reset delay   Patrick Delaunay
• [PATCH v2 0/6] net: dwc_eth_qos: add support of device tree configuration for reset delay   Patrick Delaunay
• [PATCH v2 1/6] net: eth-phy: add support of device tree configuration for gpio reset   Patrick Delaunay
• [PATCH v2 2/6] net: eth-phy: use dev_dbg and log_notice   Patrick Delaunay
• [PATCH v2 3/6] net: eth-phy: manage subnode mdio0   Patrick Delaunay
• [PATCH v2 4/6] net: dwc_eth_qos: remove the field phyaddr of the struct eqos_priv   Patrick Delaunay
• [PATCH v2 5/6] net: dwc_eth_qos: use generic ethernet phy for stm32 variant   Patrick Delaunay
• [PATCH v2 6/6] net: dwc: add a common empty ops eqos_null_ops   Patrick Delaunay
• [PATCH] clk: cosmetic change in uclass   Patrick Delaunay
• [PATCH] dm: define LOG_CATEGORY for all uclass   Patrick Delaunay
• [PATCH v3 0/7] arm: cache: cp15: don't map reserved region with no-map property   Patrick Delaunay
• [PATCH v3 1/7] lmb: Add support of flags for no-map properties   Patrick Delaunay
• [PATCH v3 2/7] lmb: add lmb_is_reserved_flags   Patrick Delaunay
• [PATCH v3 3/7] lmb: add lmb_dump_region() function   Patrick Delaunay
• [PATCH v3 4/7] test: lmb: add test for lmb_reserve_flags   Patrick Delaunay
• [PATCH v3 5/7] image-fdt: save no-map parameter of reserve-memory   Patrick Delaunay
• [PATCH v3 6/7] stm32mp: Increase the reserved memory in board_get_usable_ram_top   Patrick Delaunay
• [PATCH v3 7/7] stm32mp: don't map the reserved region with no-map property   Patrick Delaunay
• [PATCH v2] dm: core: Add address translation in fdt_get_resource   Patrick Delaunay
• [IMPORTANT] gitlab downtime   Wolfgang Denk
• [ANN] U-Boot v2021.04 released   Wolfgang Denk
• [PATCH 1/4] ARM: board: udoo_neo: Import UDOO Neo dts files   Fabio Estevam
• [PATCH 1/2] ARM: board: usbarmory: Import the usbarmory dts file   Fabio Estevam
• [PATCH 1/8] ARM: embestmx6boards: Import the marsboard/riotboard. dts files   Fabio Estevam
• [PATCH 1/5] ARM: board: udoo: Import UDOO dts files   Fabio Estevam
• [PATCH 1/5] ARM: board: warp: Import dts files   Fabio Estevam
• imxrt1020 EVK u-boot doesn't run.   Fabio Estevam
• [PATCH] imx8mn_ddr4_evk: Allow booting the kernel by default   Fabio Estevam
• [PATCH] pci: imx: disable imx6sdl LTSSM upon driver remove   Fabio Estevam
• [PATCH] pci: imx: disable imx6sdl LTSSM upon driver remove   Fabio Estevam
• [PATCH] pci: imx: disable imx6sdl LTSSM upon driver remove   Fabio Estevam
• gpmi-nand ecc   Fabio Estevam
• [PATCH 37/37] arm: imx: add i.MX8ULP EVK support   Fabio Estevam
• [NXP-IMX] Please pull nxp-imx-4-23-2021   Fabio Estevam
• [PATCH 37/37] arm: imx: add i.MX8ULP EVK support   Fabio Estevam
• [PATCH] Revert "mmc: sdhci: set to INT_DATA_END when there are data"   Peng Fan
• [PULL] please pull mmc-2021-4-6   Peng Fan
• [NXP-IMX] please pull nxp-imx-2021-4-6   Peng Fan
• [NXP-IMX] Please pull nxp-imx-4-23-2021   Peng Fan
• [BUG][Cyrus BOARD] out of bound access in board/varisys/common/sys_eeprom.c   Andy Fleming
• [PATCH 1/2] arm: dts: imx8mn, imx8mn-beacon: Sync dts files with Kernel 5.12-rc5   Adam Ford
• [PATCH 2/2] configs: imx8mn_beacon: Enable QSPI Support   Adam Ford
• [PATCH] Revert "spl: Drop bd_info in the data section"   Adam Ford
• [PATCH] Revert "spl: Drop bd_info in the data section"   Adam Ford
• [PATCH V2 24/24] ARM: imx8m: verdin-imx8mm: Enable USB Host support   Adam Ford
• [PATCH 1/2] net: fec: Don't use disabled phys   Ramon Fried
• [PATCH 2/2] net: fec: Only unregister MII bus if we registered it   Ramon Fried
• [PATCH] ls1012a: net: pfe: remove pfe stop from bootcmd   Ramon Fried
• [PATCH] net: dwc_eth_qos: add support of device tree configuration for reset delay   Ramon Fried
• [PATCH 13/37] net: fec_mxc: support i.MX8ULP   Ramon Fried
• [PATCH v3] cmd: net: Add the "arp" command   Ramon Fried
• [PATCH 0/2] net: jr2: Fix for jr2 switch   Ramon Fried
• [PATCH 3/6] net: calxedagmac: Convert to DM_ETH   Ramon Fried
• [PATCH 1/8] ARM: dragonboard410c: Enable DM_ETH   Ramon Fried
• [PATCH] net: dwc_eth_qos: add support of device tree configuration for reset delay   Ramon Fried
• [PATCH] net: sun8i-emac: Fix pinmux setup for Allwinner H5   Ramon Fried
• [PATCH] cmd: net: add a 'net list' command to list network devs   Ramon Fried
• [PATCH] net: e1000: do not attempt to set hwaddr for i210 without FLASH   Ramon Fried
• [PATCH] net: designware: fix PHY reset with DM_MDIO   Ramon Fried
• [PATCH 2/8] net: designware: meson8b: add g12a compatible   Ramon Fried
• [PATCH v2 09/13] net: synquacer: Add netsec driver   Ramon Fried
• [PATCH] net: use a more deterministic approach to get the active ethernet device   Ramon Fried
• [PATCH 1/3] net: eth-phy: define LOG_CATEGORY   Ramon Fried
• [PATCH 3/3] net: define LOG_CATEGORY   Ramon Fried
• [PATCH 2/3] net: dwc_eth_qos: define LOG_CATEGORY   Ramon Fried
• [PATCH v2 1/6] net: eth-phy: add support of device tree configuration for gpio reset   Ramon Fried
• [PATCH v2 2/6] net: eth-phy: use dev_dbg and log_notice   Ramon Fried
• [PATCH v2 3/6] net: eth-phy: manage subnode mdio0   Ramon Fried
• [PATCH v2 4/6] net: dwc_eth_qos: remove the field phyaddr of the struct eqos_priv   Ramon Fried
• [PATCH v2 5/6] net: dwc_eth_qos: use generic ethernet phy for stm32 variant   Ramon Fried
• [PATCH v2 6/6] net: dwc: add a common empty ops eqos_null_ops   Ramon Fried
• [PATCH 3/4] net: phy: marvell: Remove PHY_INTERFACE_MODE_SGMII_2500   Ramon Fried
• [PATCH 4/4] net: mvpp2: Remove PHY_INTERFACE_MODE_SGMII_2500   Ramon Fried
• [PATCH v1 02/10] net: mvpp2: add CP115 port1 10G/5G SFI support   Ramon Fried
• [PATCH v1 03/10] net: mvpp2: add 1000BaseX and 2500BaseX ppv2 support   Ramon Fried
• [PATCH v1 04/10] net: mvpp2: remove redundant SMI address configuration   Ramon Fried
• [PATCH v1 08/10] net: mvpp2: fix missing switch case break   Ramon Fried
• [PATCH v1 10/10] net: mvpp2: add explicit sgmii-2500 support   Ramon Fried
• [PATCH v1 09/10] net: mvpp2: allow MDIO registration for fixed links   Ramon Fried
• [PATCH] net: phy: micrel: Get phy node from phy-handle   Ramon Fried
• [PATCH v1 08/10] net: mvpp2: fix missing switch case break   Ramon Fried
• [EXTERNAL] Re: [PATCH v2 6/6] test: dm: Add test for ECDSA UCLASS support   Alex G.
• [EXTERNAL] Re: [PATCH v2 6/6] test: dm: Add test for ECDSA UCLASS support   Alex G.
• [PATCH] Revert "spl: Drop bd_info in the data section"   Alex G.
• [PATCH] Revert "spl: Drop bd_info in the data section"   Alex G.
• [PATCH] Revert "spl: Drop bd_info in the data section"   Alex G.
• Getting rid of falcon mode   Alex G.
• Getting rid of falcon mode   Alex G.
• [PATCH] Revert "spl: Drop bd_info in the data section"   Alex G.
• [PATCH v4 2/6] lib: ecdsa: Add skeleton to implement ecdsa verification in u-boot   Alex G.
• [PATCH v4 2/6] lib: ecdsa: Add skeleton to implement ecdsa verification in u-boot   Alex G.
• [2021.04 URGENT PATCH] Makefile: Remove idiotic ominous messages   Alexandru Gagniuc
• [PATCH v3 0/6] SPL: FIT: Fix some omissions of SPL_LOAD_FIT_FULL and bootm   Alexandru Gagniuc
• [PATCH v3 1/6] spl: LOAD_FIT_FULL: Fix selection of the "fdt" node   Alexandru Gagniuc
• [PATCH v3 2/6] spl: LOAD_FIT_FULL: Do not hard-code os to IH_OS_U_BOOT   Alexandru Gagniuc
• [PATCH v3 3/6] spl: LOAD_FIT_FULL: Relocate FDT for u-boot payloads   Alexandru Gagniuc
• [PATCH v3 4/6] spl: LOAD_FIT_FULL: Support 'kernel' and 'firmware' properties   Alexandru Gagniuc
• [PATCH v3 5/6] image-fit: Accept IH_TYPE_FIRMWARE in fit_image_load() as valid   Alexandru Gagniuc
• [PATCH v3 6/6] image-fit: Accept OP-TEE images when booting a FIT   Alexandru Gagniuc
• [PATCH] Revert "spl: Drop bd_info in the data section"   Alexandru Gagniuc
• [PATCH v3 0/5] stm32mp: Enable OP-TEE and TZC support in SPL   Alexandru Gagniuc
• [PATCH v3 1/5] spl: mmc: Support OP-TEE payloads in Falcon mode   Alexandru Gagniuc
• [PATCH v3 2/5] spl: Introduce spl_board_prepare_for_optee() hook   Alexandru Gagniuc
• [PATCH v3 3/5] arm: stm32mp: Implement support for TZC 400 controller   Alexandru Gagniuc
• [PATCH v3 4/5] stm32mp1: spl: Configure TrustZone controller for OP-TEE   Alexandru Gagniuc
• [PATCH v3 5/5] ARM: dts: stm32mp: Add OP-TEE reserved memory to SPL dtb   Alexandru Gagniuc
• [PATCH v4 0/6] nable ECDSA FIT verification for stm32mp   Alexandru Gagniuc
• [PATCH v4 1/6] dm: crypto: Define UCLASS API for ECDSA signature verification   Alexandru Gagniuc
• [PATCH v4 2/6] lib: ecdsa: Add skeleton to implement ecdsa verification in u-boot   Alexandru Gagniuc
• [PATCH v4 3/6] lib: ecdsa: Implement signature verification for crypto_algo API   Alexandru Gagniuc
• [PATCH v4 4/6] arm: stm32mp1: Implement ECDSA signature verification   Alexandru Gagniuc
• [PATCH v4 5/6] Kconfig: FIT_SIGNATURE should not select RSA_VERIFY   Alexandru Gagniuc
• [PATCH v4 6/6] test: dm: Add test for ECDSA UCLASS support   Alexandru Gagniuc
• [PATCH 0/5] Add support for embedding public key in platform's dtb   Sughosh Ganu
• [PATCH 1/5] efi_loader: Kconfig: Select IMAGE_SIGN_INFO when capsule authentication is enabled   Sughosh Ganu
• [PATCH 2/5] efi_loader: Kconfig: Add symbols for embedding the public key into the platform's dtb   Sughosh Ganu
• [PATCH 3/5] efi_capsule: Add a weak function to check whether capsule authentication is enabled   Sughosh Ganu
• [PATCH 4/5] efi_capsule: Add a weak function to get the public key needed for capsule authentication   Sughosh Ganu
• [PATCH 5/5] Makefile: Add provision for embedding public key in platform's dtb   Sughosh Ganu
• [RESEND PATCH v1 0/5] Add support for embedding public key in platform's dtb   Sughosh Ganu
• [RESEND PATCH v1 1/5] efi_loader: Kconfig: Select IMAGE_SIGN_INFO when capsule authentication is enabled   Sughosh Ganu
• [RESEND PATCH v1 2/5] efi_loader: Kconfig: Add symbols for embedding the public key into the platform's dtb   Sughosh Ganu
• [RESEND PATCH v1 3/5] efi_capsule: Add a weak function to check whether capsule authentication is enabled   Sughosh Ganu
• [RESEND PATCH v1 4/5] efi_capsule: Add a weak function to get the public key needed for capsule authentication   Sughosh Ganu
• [RESEND PATCH v1 5/5] Makefile: Add provision for embedding public key in platform's dtb   Sughosh Ganu
• [PATCH 0/5] Add support for embedding public key in platform's dtb   Sughosh Ganu
• [PATCH] efi_loader: efi_esrt: Fix the build warning for 32 bit systems   Sughosh Ganu
• [PATCH 0/5] Add support for embedding public key in platform's dtb   Sughosh Ganu
• [PATCH 0/5] Add support for embedding public key in platform's dtb   Sughosh Ganu
• [PATCH 3/5] efi_capsule: Add a weak function to check whether capsule authentication is enabled   Sughosh Ganu
• [PATCH 4/5] efi_capsule: Add a weak function to get the public key needed for capsule authentication   Sughosh Ganu
• [PATCH 0/5] Add support for embedding public key in platform's dtb   Sughosh Ganu
• [PATCH] efi_loader: esrt: Remove EFI_CALL invocation in efi_esrt_register   Sughosh Ganu
• [PATCH] efi_loader: esrt: Remove EFI_CALL invocation in efi_esrt_register   Sughosh Ganu
• [PATCH v2] efi_loader: esrt: Remove EFI_CALL invocation for efi_create_event   Sughosh Ganu
• [PATCH v2 0/4] Add support for embedding public key in platform's dtb   Sughosh Ganu
• [PATCH v2 1/4] efi_loader: capsule: Remove the check for capsule_authentication_enabled environment variable   Sughosh Ganu
• [PATCH v2 2/4] efi_loader: Kconfig: Add symbols for embedding the public key into the platform's dtb   Sughosh Ganu
• [PATCH v2 3/4] efi_capsule: Add a function to get the public key needed for capsule authentication   Sughosh Ganu
• [PATCH v2 4/4] Makefile: Add provision for embedding public key in platform's dtb   Sughosh Ganu
• [PATCH] efi_loader: esrt: Remove incorrect invocations of EFI_CALL macro   Sughosh Ganu
• [PATCH v2 3/4] efi_capsule: Add a function to get the public key needed for capsule authentication   Sughosh Ganu
• [PATCH v2 12/13] doc: qemu: arm64: Fix the documentation of capsule update   Sughosh Ganu
• [RFC] efi_loader: improve firmware capsule authentication   Sughosh Ganu
• [RFC] efi_loader: improve firmware capsule authentication   Sughosh Ganu
• [PATCH v2,RESEND] mmc: mtk-sd: increase the minimum bus frequency   Weijie Gao
• [PATCH v2,RESEND] mmc: mtk-sd: increase the minimum bus frequency   Weijie Gao
• [PATCH] board: novtech: meerkat96: Add environment variables   Carl Gelfand
• u-boot patch for ACK   Aleksandar Gerasimovski
• [PATCH 00/17] arm: mach-k3: Initial Support for Texas Instruments AM642 Platform   Dave Gerlach
• [PATCH 01/17] arm: mach-k3: Add basic support for AM642 SoC definition   Dave Gerlach
• [PATCH 02/17] arm: mach-k3: am642: Add support for boot device detection   Dave Gerlach
• [PATCH 03/17] arm: mach-k3: am642: Unlock all applicable control MMR registers   Dave Gerlach
• [PATCH 04/17] arm: mach-k3: am642: Store boot info from ROM   Dave Gerlach
• [PATCH 05/17] arm: mach-k3: am642: Load SYSFW binary and config from boot media   Dave Gerlach
• [PATCH 06/17] arm: mach-k3: am642: Use mmc start and stop callbacks   Dave Gerlach
• [PATCH 07/17] arm: mach-k3: am642: Shut down R5 core after ATF startup on A53   Dave Gerlach
• [PATCH 08/17] armv8: mach-k3: am642: Add custom MMU support   Dave Gerlach
• [PATCH 09/17] mmc: sdhci_am654: Add Support for TI's AM642 SoC   Dave Gerlach
• [PATCH 10/17] mailbox: k3-sec-proxy: Extend valid thread IDs   Dave Gerlach
• [PATCH 11/17] board: ti: am64x: Add board support for am64x evm   Dave Gerlach
• [PATCH 12/17] dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64   Dave Gerlach
• [PATCH 13/17] arm: dts: ti: Add Support for AM642 SoC   Dave Gerlach
• [PATCH 14/17] arm: dts: k3-am642: Add initial support for EVM   Dave Gerlach
• [PATCH 15/17] arm: dts: k3-am642: Add r5 specific dt support   Dave Gerlach
• [PATCH 16/17] configs: am64x_evm_r5: Add Initial support   Dave Gerlach
• [PATCH 17/17] configs: am64x_evm_a53: Add Initial support   Dave Gerlach
• [PATCH] Makefile: Silence the deprecation script   Simon Glass
• [PATCH] Makefile: Silence the deprecation script   Simon Glass
• [PATCH v4 00/14] Makefile: Update migration warnings   Simon Glass
• [PATCH V2] spi: Update speed/mode on change   Simon Glass
• [PATCH v3 15/28] usb: ehci-mx6: Drop assignment of sequence number   Simon Glass
• [PATCH V2] spi: Update speed/mode on change   Simon Glass
• [PATCH V2] spi: Update speed/mode on change   Simon Glass
• [PATCH] patman: Parse checkpatch by message instead of by line   Simon Glass
• [PATCH] dm: core: Add size operations on device tree references   Simon Glass
• [PATCH 1/2] binman: Tweak implementation of fmap   Simon Glass
• [PATCH 2/2] binman: Support adding sections to FMAPs   Simon Glass
• [PATCH 1/1] requirements.txt: pin docutils   Simon Glass
• [PATCH 1/1] requirements.txt: pin docutils   Simon Glass
• Chromium OS verified boot 2018 with U-Boot   Simon Glass
• [PATCH 0/4] sf: Add documentation and an 'sf mmap' command   Simon Glass
• [PATCH 1/4] command: Use a constant pointer for the help   Simon Glass
• [PATCH 2/4] sf: Tidy up code to avoid #ifdef   Simon Glass
• [PATCH 3/4] sf: doc: Add documentation for the 'sf' command   Simon Glass
• [PATCH 4/4] sf: Provide a command to access memory-mapped SPI   Simon Glass
• [PATCH 1/1] sandbox: document parameters of os_realloc()   Simon Glass
• [PATCH] dtc: Update the build rule for pylibfdt   Simon Glass
• [PATCH v2 6/6] Convert CONFIG_MISC_INIT_F to Kconfig   Simon Glass
• [PATCH v2 5/6] moveconfig: Handle binary files cleanly   Simon Glass
• [PATCH v2 4/6] log: Fix up debug_cond() when LOG is enabled   Simon Glass
• [PATCH v2 3/6] dtoc: Improve handling of reg properties   Simon Glass
• [PATCH v2 2/6] dtoc: Adjust detection of 64-bit properties   Simon Glass
• [PATCH v2 1/6] dtoc: Show driver warnings once at the end   Simon Glass
• [PATCH 2/3] test: Allow tests to run on any board   Simon Glass
• [PATCH] buildman: Add an encoding to the out-env file   Simon Glass
• [PATCH v3 9/9] pinctrl: Return -ENOSYS when system call is not available   Simon Glass
• [PATCH v3 8/9] simple-pm-bus: Use -ENOSYS for checking missing system call   Simon Glass
• [PATCH v3 7/9] clk: Return -ENOSYS when system call is not available   Simon Glass
• [PATCH v3 5/9] tlv_eeprom: Return -ENOSYS when system call is not available   Simon Glass
• [PATCH v3 6/9] clk: Update drivers to use -EINVAL   Simon Glass
• [PATCH v3 4/9] spi: Return -ENOSYS when system call is not available   Simon Glass
• [PATCH v3 3/9] usb: Return -ENOSYS when system call is not available   Simon Glass
• [PATCH v3 2/9] dm: core: Use -ENOSPC in acpi_get_path()   Simon Glass
• [PATCH v3 1/9] dm: core: Document the common error codes   Simon Glass
• [PATCH] patman: Continue on if warnings are found outside a commit   Simon Glass
• [PATCH v2 12/19] video: sunxi: de2: switch to DT probing   Simon Glass
• Please pull u-boot-dm   Simon Glass
• [PATCH 00/17] misc: Some more misc patches   Simon Glass
• [PATCH 01/17] pci: Use const for pci_find_device_id() etc.   Simon Glass
• [PATCH 02/17] x86: pci: Allow binding of some devices before relocation   Simon Glass
• [PATCH 03/17] x86: Allow coreboot serial driver to guess the UART   Simon Glass
• [PATCH 04/17] spi: ich: Don't require the PCH   Simon Glass
• [PATCH 05/17] tpm: cr50: Drop unnecessary coral headers   Simon Glass
• [PATCH 06/17] x86: Don't set up MTRRs if previously done   Simon Glass
• [PATCH 07/17] x86: Update the MP constants to avoid conflicts   Simon Glass
• [PATCH 08/17] x86: Do cache set-up by default when booting from coreboot   Simon Glass
• [PATCH 09/17] x86: coreboot: Show the BIOS date   Simon Glass
• [PATCH 10/17] x86: coral: Allow booting from coreboot   Simon Glass
• [PATCH 11/17] x86: Add function comments to cb_sysinfo.h   Simon Glass
• [PATCH 12/17] x86: coreboot: Use vendor in the Kconfig   Simon Glass
• [PATCH 13/17] x86: coreboot: Enable the cbsysinfo command   Simon Glass
• [PATCH 14/17] x86: coreboot: Document the memory map   Simon Glass
• [PATCH 15/17] x86: Check ROM exists before building vboot   Simon Glass
• [PATCH 16/17] dtoc: Check that a parent is not missing   Simon Glass
• [PATCH 17/17] doc: Update documentation for cros-2021.04 release   Simon Glass
• [PATCH 0/5] Add support for embedding public key in platform's dtb   Simon Glass
• [PATCH 1/2] of: addr: Abort address translation for parent nodes missing 'ranges'   Simon Glass
• [RESEND PATCH v1 1/5] efi_loader: Kconfig: Select IMAGE_SIGN_INFO when capsule authentication is enabled   Simon Glass
• [PATCH v2] smbios: Fix table when no string is present   Simon Glass
• [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages   Simon Glass
• [PATCH] Revert "spl: Drop bd_info in the data section"   Simon Glass
• mkimage regression when building ARCH=mips defconfig Linux kernel   Simon Glass
• [PATCH 0/5] Add support for embedding public key in platform's dtb   Simon Glass
• [PATCH] board_f: cosmetic: change the debug trace to KB in reserve_video   Simon Glass
• [PATCH 0/5] Add support for embedding public key in platform's dtb   Simon Glass
• [PATCH 0/4] buildman: Deal with unicode errors and thread exceptions   Simon Glass
• [PATCH 1/4] buildman: Tidy up a few comments   Simon Glass
• [PATCH 2/4] buildman: Use common code to send an result   Simon Glass
• [PATCH 3/4] buildman: Handle exceptions in threads gracefully   Simon Glass
• [PATCH 4/4] buildman: Use bytes for the environment   Simon Glass
• [PATCH 1/1] doc: duplicate target 'youtube'   Simon Glass
• [PATCH v3 1/4] psci: add features/reset2 support   Simon Glass
• [PATCH v2 2/2] test: dm: add test item for ofnode_get_addr() and ofnode_get_size()   Simon Glass
• [PATCH v2 1/2] dm: core: Add size operations on device tree references   Simon Glass
• [PATCH] Revert "spl: Drop bd_info in the data section"   Simon Glass
• [PATCH] checkpatch: Ignore ENOSYS warnings   Simon Glass
• [PATCH v3 1/2] dm: core: Add size operations on device tree references   Simon Glass
• [PATCH v3 2/2] test: dm: add test item for ofnode_get_addr() and ofnode_get_size()   Simon Glass
• [PATCH] Revert "spl: Drop bd_info in the data section"   Simon Glass
• [PATCH] Revert "spl: Drop bd_info in the data section"   Simon Glass
• [PATCH v3 13/28] pci: Update to use new sequence numbers   Simon Glass
• Getting rid of falcon mode   Simon Glass
• [PATCH v2 02/17] dm: test: Add test case to check node name ignoring unit address   Simon Glass
• [PATCH v2 01/17] dm: core: Add helper to compare node names   Simon Glass
• [PATCH] checkpatch: Ignore ENOSYS warnings   Simon Glass
• [PATCH 01/13] pci: Update the highest subordinate bus number for bridge setup   Simon Glass
• [PATCH 02/13] ata: ahci-pci: Use scsi_ops to initialize ops   Simon Glass
• [PATCH 03/13] dm: pci: Skip setting VGA bridge bits if parent device is the host bus   Simon Glass
• [PATCH v2 2/3] part: Fix bogus return from part_get_info_by_dev_and_name   Simon Glass
• [PATCH v2 3/3] test: Add test for partitions   Simon Glass
• [PATCH v2 3/4] efi_capsule: Add a function to get the public key needed for capsule authentication   Simon Glass
• [PATCH 01/11] clk: Allow force setting clock defaults before relocation   Simon Glass
• [PATCH 1/4] command: Use a constant pointer for the help   Simon Glass
• MXC I2C recover/idle_bus does not work if CONFIG_DM_I2C is configured   Simon Glass
• [PATCH v1 1/2] cmd: bind: Fix driver binding on a device   Simon Glass
• [PATCH 2/6] spl: LOAD_FIT_FULL: Do not hard-code os to IH_OS_U_BOOT   Simon Glass
• [PATCH v2 03/17] drivers: reset: Handle gracefully NULL pointers   Simon Glass
• [PATCH] dm: core: Fix uninitialized return value from dm_scan_fdt_node   Simon Glass
• [PATCH v10 1/3] test: fix test/dm/regmap.c   Simon Glass
• [PATCH v10 2/3] x86: correct usage of CFLAGS_NON_EFI   Simon Glass
• [PATCH 11/11] test: Add K210 PLL tests to sandbox defconfigs   Simon Glass
• [PATCH 3/5] common: Rename macro appropriately   Simon Glass
• [PATCH v3 13/28] pci: Update to use new sequence numbers   Simon Glass
• [PATCH] smbios: Fix table when no string is present   Simon Glass
• [RFC][PATCH 2/2] configs: sandbox: enable stage pre-load for bootm   Simon Glass
• [PATCH 2/2] Rename CONFIG_DM_RESET to CONFIG_RESET   Simon Glass
• [PATCH v3 01/28] linker_lists: Fix alignment issue   Simon Glass
• [PATCH v2 3/3] test: Add test for partitions   Simon Glass
• [PATCH 1/5] lib: add crypt subsystem   Simon Glass
• [PATCH 2/5] common: integrate crypt-based passwords   Simon Glass
• [PATCH 4/5] cmd: allow disabling of timeout for password entry   Simon Glass
• [PATCH 1/2] env: allow environment to be amended from control dtb   Simon Glass
• [PATCH 2/2] sandbox: add test of CONFIG_ENV_IMPORT_FDT   Simon Glass
• [PATCH v4 0/6] nable ECDSA FIT verification for stm32mp   Simon Glass
• [PATCH v4 1/6] dm: crypto: Define UCLASS API for ECDSA signature verification   Simon Glass
• [PATCH v4 2/6] lib: ecdsa: Add skeleton to implement ecdsa verification in u-boot   Simon Glass
• [PATCH v4 6/6] test: dm: Add test for ECDSA UCLASS support   Simon Glass
• [BUG] sandbox error handling broken on origin/next   Simon Glass
• [PATCH 1/5] lib: add crypt subsystem   Simon Glass
• [PATCH v4 2/6] lib: ecdsa: Add skeleton to implement ecdsa verification in u-boot   Simon Glass
• [PATCH] x86: Correct regwidth prompt in cbsysinfo   Simon Glass
• [PATCH v2 00/16] misc: Some more misc patches   Simon Glass
• [PATCH v2 01/16] pci: Use const for pci_find_device_id() etc.   Simon Glass
• [PATCH v2 02/16] x86: pci: Allow binding of some devices before relocation   Simon Glass
• [PATCH v2 03/16] x86: Allow coreboot serial driver to guess the UART   Simon Glass
• [PATCH v4 2/6] lib: ecdsa: Add skeleton to implement ecdsa verification in u-boot   Simon Glass
• [PATCH v2 04/16] spi: ich: Don't require the PCH   Simon Glass
• [PATCH v2 05/16] tpm: cr50: Drop unnecessary coral headers   Simon Glass
• [PATCH 02/17] x86: pci: Allow binding of some devices before relocation   Simon Glass
• [PATCH v2 06/16] x86: Don't set up MTRRs if previously done   Simon Glass
• [PATCH 03/17] x86: Allow coreboot serial driver to guess the UART   Simon Glass
• [PATCH v2 07/16] x86: Update the MP constants to avoid conflicts   Simon Glass
• [PATCH v2 08/16] x86: Do cache set-up by default when booting from coreboot   Simon Glass
• [PATCH 04/17] spi: ich: Don't require the PCH   Simon Glass
• [PATCH v2 09/16] x86: coreboot: Show the BIOS date   Simon Glass
• [PATCH 12/17] x86: coreboot: Use vendor in the Kconfig   Simon Glass
• [PATCH v2 10/16] x86: coral: Allow booting from coreboot   Simon Glass
• [PATCH 17/17] doc: Update documentation for cros-2021.04 release   Simon Glass
• [PATCH v2 11/16] x86: Add function comments to cb_sysinfo.h   Simon Glass
• [PATCH v2 12/16] x86: coreboot: Use vendor in the Kconfig   Simon Glass
• [PATCH v2 13/16] x86: coreboot: Document the memory map   Simon Glass
• [PATCH v2 14/16] x86: cros: Check ROM exists before building vboot   Simon Glass
• [PATCH v2 15/16] dtoc: Check that a parent is not missing   Simon Glass
• [PATCH v2 16/16] doc: Update documentation for cros-2021.04 release   Simon Glass
• [PATCH] binman: Correct testSplNoDtb() and Tpl also   Simon Glass
• [PATCH 03/17] x86: Allow coreboot serial driver to guess the UART   Simon Glass
• [PATCH] dtoc: Correct dtoc output when testing   Simon Glass
• [PATCH] dtoc: Correct dtoc output when testing   Simon Glass
• [PATCH] binman: Correct testSplNoDtb() and Tpl also   Simon Glass
• [PATCH 1/1] tpm: missing event types   Simon Glass
• [PATCH v3 2/2] test: dm: add test item for ofnode_get_addr() and ofnode_get_size()   Simon Glass
• [PATCH v3 1/2] dm: core: Add size operations on device tree references   Simon Glass
• [PATCH 4/4] buildman: Use bytes for the environment   Simon Glass
• [PATCH 3/4] buildman: Handle exceptions in threads gracefully   Simon Glass
• [PATCH 2/4] buildman: Use common code to send an result   Simon Glass
• [PATCH 1/4] buildman: Tidy up a few comments   Simon Glass
• [PATCH] dm: core: Fix uninitialized return value from dm_scan_fdt_node   Simon Glass
• [PATCH 2/2] binman: Support adding sections to FMAPs   Simon Glass
• [PATCH 1/2] binman: Tweak implementation of fmap   Simon Glass
• [PATCH] patman: Parse checkpatch by message instead of by line   Simon Glass
• [PATCH 3/5] Azure/GitLab: Ensure we use requirements.txt for testsuites   Simon Glass
• [PATCH v2 3/4] test: Use positive conditional in test_matches()   Simon Glass
• [PATCH v2 2/4] test: Allow simple glob pattern in the test name   Simon Glass
• [PATCH] fdtdec: fdtdec_get_aliases_highest_id: skip aliases to disabled nodes   Simon Glass
• [RFC PATCH v1] lib: rsa: introduce RSA_SOFTWARE_EXP_TINY   Simon Glass
• [PATCH v2 04/13] gpio: Introduce CONFIG_ONLY_GENERIC_GPIO to cleanup #ifdefs   Simon Glass
• [PATCH 1/1] doc: fatinfo man-page   Simon Glass
• [PATCH v2 4/5] configs: sandbox: add USB_ETHER and GADGET_DOWNLOAD gadget support   Simon Glass
• [PATCH v2 5/5] test/py: Add usb gadget binding test   Simon Glass
• [Uboot-stm32] [PATCH 1/2] cmd: pinmux: update result of do_status   Simon Glass
• [PATCH 2/2] cmd: pinmux: support pin name in status command   Simon Glass
• [PATCH 2/5] common: integrate crypt-based passwords   Simon Glass
• [PATCH] net: use the same alias stem for ethernet as linux   Simon Glass
• [PATCH 03/17] x86: Allow coreboot serial driver to guess the UART   Simon Glass
• [PATCH v1 1/6] lib: add crypt subsystem   Simon Glass
• [PATCH v1 3/6] common: integrate crypt-based passwords   Simon Glass
• [PATCH v4 2/6] lib: ecdsa: Add skeleton to implement ecdsa verification in u-boot   Simon Glass
• [PATCH] dm: define LOG_CATEGORY for all uclass   Simon Glass
• [PATCH v3 1/7] lmb: Add support of flags for no-map properties   Simon Glass
• [PATCH v3 2/7] lmb: add lmb_is_reserved_flags   Simon Glass
• [PATCH v3 3/7] lmb: add lmb_dump_region() function   Simon Glass
• [PATCH v3 4/7] test: lmb: add test for lmb_reserve_flags   Simon Glass
• [PATCH v3 5/7] image-fdt: save no-map parameter of reserve-memory   Simon Glass
• [PATCH v2] dm: core: Add address translation in fdt_get_resource   Simon Glass
• [PATCH 0/5] Revert "fdt: translate address if #size-cells = <0>"   Simon Glass
• Please pull u-boot-dm   Simon Glass
• [PATCH v2 04/13] gpio: Introduce CONFIG_ONLY_GENERIC_GPIO to cleanup #ifdefs   Simon Glass
• [PATCH 03/17] x86: Allow coreboot serial driver to guess the UART   Simon Glass
• [PATCH] Makefile: Fix generation of flash.bin u-boot.itb with binman   Simon Glass
• [PATCH v2 2/2] of: addr: Remove call to dev_count_cells() in of_get_address()   Simon Glass
• [PATCH] Makefile: Fix generation of flash.bin u-boot.itb with binman   Simon Glass
• [RFC PATCH 3/3] net: phy: dp83869: Port the kernel driver   Christian Gmeiner
• [PATCH] Fix buffer overflow in iomux_replace_device()   Yuichiro Goto
• [PATCH v2] IOMUX: Fix buffer overflow in iomux_replace_device()   Yuichiro Goto
• [PATCH v3] IOMUX: Fix buffer overflow in iomux_replace_device()   Yuichiro Goto
• [PATCH v2] IOMUX: Fix buffer overflow in iomux_replace_device()   Yuichiro Goto
• [PATCH] mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode   Aswath Govindraju
• [PATCH] mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode   Aswath Govindraju
• [PATCH] mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode   Aswath Govindraju
• [PATCH] arm: dts: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems   Aswath Govindraju
• [PATCH] arm: dts: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems   Aswath Govindraju
• [PATCH v2] arm: dts: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems   Aswath Govindraju
• [PATCH] ARM: ti: Increase the allocated size for MLO.raw   Aswath Govindraju
• [PATCH 00/11] Enable DM_ETH for DPAA1 PowerPC T-series boards   Camelia Groza
• [PATCH 01/11] powerpc: dts: t2080: add QorIQ DPAA 1 FMan v3 nodes   Camelia Groza
• [PATCH 02/11] powerpc: dts: t2080rdb: add FMan v3 nodes   Camelia Groza
• [PATCH 03/11] board: freescale: t208xrdb: fdt fixups under DM_ETH   Camelia Groza
• [PATCH 04/11] configs: T2080RDB: enable DM_ETH   Camelia Groza
• [PATCH 05/11] powerpc: dts: t4240: add QorIQ DPAA 1 FMan v3 nodes   Camelia Groza
• [PATCH 06/11] powerpc: dts: t4240rdb: add FMan v3 nodes   Camelia Groza
• [PATCH 07/11] powerpc: dts: qoriq: update the mdio offsets under the second FMan v3   Camelia Groza
• [PATCH 08/11] configs: T4240RDB: enable DM_ETH   Camelia Groza
• [PATCH 09/11] powerpc: dts: t1042: add QorIQ DPAA 1 FMan v3 nodes   Camelia Groza
• [PATCH 10/11] powerpc: dts: t1042d4rdb: add FMan v3 nodes   Camelia Groza
• [PATCH 11/11] configs: T1042D4RDB: enable DM_ETH   Camelia Groza
• [PATCH 00/11] Enable DM_ETH for DPAA1 PowerPC T-series boards   Camelia Groza
• [PATCH 01/11] powerpc: dts: t2080: add QorIQ DPAA 1 FMan v3 nodes   Camelia Groza
• [PATCH 02/11] powerpc: dts: t2080rdb: add FMan v3 nodes   Camelia Groza
• [PATCH 03/11] board: freescale: t208xrdb: fdt fixups under DM_ETH   Camelia Groza
• [PATCH 04/11] configs: T2080RDB: enable DM_ETH   Camelia Groza
• [PATCH 05/11] powerpc: dts: t4240: add QorIQ DPAA 1 FMan v3 nodes   Camelia Groza
• [PATCH 06/11] powerpc: dts: t4240rdb: add FMan v3 nodes   Camelia Groza
• [PATCH 07/11] powerpc: dts: qoriq: update the mdio offsets under the second FMan v3   Camelia Groza
• [PATCH 08/11] configs: T4240RDB: enable DM_ETH   Camelia Groza
• [PATCH 09/11] powerpc: dts: t1042: add QorIQ DPAA 1 FMan v3 nodes   Camelia Groza
• [PATCH 10/11] powerpc: dts: t1042d4rdb: add FMan v3 nodes   Camelia Groza
• [PATCH 11/11] configs: T1042D4RDB: enable DM_ETH   Camelia Groza
• [PATCH v2 00/11] Enable DM_ETH for DPAA1 PowerPC T-series boards   Camelia Groza
• [PATCH v2 01/11] powerpc: dts: t2080: add QorIQ DPAA 1 FMan v3 nodes   Camelia Groza
• [PATCH v2 02/11] powerpc: dts: t2080rdb: add FMan v3 nodes   Camelia Groza
• [PATCH v2 03/11] board: freescale: t208xrdb: fdt fixups under DM_ETH   Camelia Groza
• [PATCH v2 04/11] configs: T2080RDB: enable DM_ETH   Camelia Groza
• [PATCH v2 05/11] powerpc: dts: t4240: add QorIQ DPAA 1 FMan v3 nodes   Camelia Groza
• [PATCH v2 06/11] powerpc: dts: t4240rdb: add FMan v3 nodes   Camelia Groza
• [PATCH v2 07/11] powerpc: dts: qoriq: update the mdio offsets under the second FMan v3   Camelia Groza
• [PATCH v2 08/11] configs: T4240RDB: enable DM_ETH   Camelia Groza
• [PATCH v2 09/11] powerpc: dts: t1042: add QorIQ DPAA 1 FMan v3 nodes   Camelia Groza
• [PATCH v2 10/11] powerpc: dts: t1042d4rdb: add FMan v3 nodes   Camelia Groza
• [PATCH v2 11/11] configs: T1042D4RDB: enable DM_ETH   Camelia Groza
• Pull request: rockchip-for-v2021.07   Anatolij Gustschin
• Please pull u-boot-video   Anatolij Gustschin
• [PATCH] video: Fix line padding calculation for 16 and 24 BPP bitmaps   Anatolij Gustschin
• [RFC 1/1] tegra: video: fix tegra_dc_sor_config_panel()   Anatolij Gustschin
• [PATCH] board_f: cosmetic: change the debug trace to KB in reserve_video   Anatolij Gustschin
• [PATCH] finish removing mb862xx video driver   Anatolij Gustschin
• [PATCH] video: SIMPLE_PANEL depends on DM_GPIO   Anatolij Gustschin
• [PATCH v3 1/2] video: backlight: Support PWMs without a known period_ns   Anatolij Gustschin
• [PATCH v3 2/2] pwm: Add a driver for Chrome OS EC PWM   Anatolij Gustschin
• [patch v4 0/9] rk3399 (Pinebook pro) EDP support   Anatolij Gustschin
• Please pull u-boot-video   Anatolij Gustschin
• [PATCH v3 0/9] video: sunxi: rework DE2 driver   Anatolij Gustschin
• [PATCH 1/1] bootcount: add a new driver with syscon as backend   Nandor Han
• Locking down U-Boot env with ENV_WRITEABLE_LIST   Tim Harvey
• Locking down U-Boot env with ENV_WRITEABLE_LIST   Tim Harvey
• [PATCH V3] env: Fix invalid env handling in env_init()   Tim Harvey
• Locking down U-Boot env with ENV_WRITEABLE_LIST   Tim Harvey
• [PATCH 05/11] arm: dts: imx6qdl-gw*: add dr_mode prop to dt to avoid error   Tim Harvey
• Locking down U-Boot env with ENV_WRITEABLE_LIST   Tim Harvey
• Locking down U-Boot env with ENV_WRITEABLE_LIST   Tim Harvey
• [PATCH] imx: mkimage_fit_atf: fix file size reporting   Tim Harvey
• [PATCH 4/6] drivers: net: octeontx: fix QSGMII   Tim Harvey
• [PATCH 06/11] imx: ventana: convert U-Boot to OF_CONTROL using FIT image   Tim Harvey
• [PATCH 06/11] imx: ventana: convert U-Boot to OF_CONTROL using FIT image   Tim Harvey
• [PATCH 06/11] imx: ventana: convert U-Boot to OF_CONTROL using FIT image   Tim Harvey
• [PATCH] Revert "spl: Drop bd_info in the data section"   Tim Harvey
• [PATCH 06/11] imx: ventana: convert U-Boot to OF_CONTROL using FIT image   Tim Harvey
• [PATCH v3 13/28] pci: Update to use new sequence numbers   Tim Harvey
• [PATCH v3 13/28] pci: Update to use new sequence numbers   Tim Harvey
• [PATCH 01/13] pci: Update the highest subordinate bus number for bridge setup   Tim Harvey
• [PATCH 01/13] pci: Update the highest subordinate bus number for bridge setup   Tim Harvey
• [PATCH] net: e1000: do not attempt to set hwaddr for i210 without FLASH   Tim Harvey
• [PATCH] pci: imx: disable imx6sdl LTSSM upon driver remove   Tim Harvey
• [PATCH] Revert "spl: Drop bd_info in the data section"   Tim Harvey
• [PATCH] pci: imx: disable imx6sdl LTSSM upon driver remove   Tim Harvey
• [PATCH] cmd: net: add a 'net list' command to list network devs   Tim Harvey
• [PATCH] fdtdec: fdtdec_get_aliases_highest_id: skip aliases to disabled nodes   Tim Harvey
• [PATCH 1/3] pci: Update the highest subordinate bus number for bridge setup   Tim Harvey
• [PATCH 2/3] pci: pci-uclass: Add board_pci_fixup_dev for DM_PCI   Tim Harvey
• [PATCH 3/3] imx: ventana: enable dm support for PCI and FEC ethernet   Tim Harvey
• [PATCH 1/2] imx: ventana: add delay before reading EEPROM   Tim Harvey
• [PATCH 2/2] arm: dts: imx6qdl-gw552x.dtsi: fix VBUS supply   Tim Harvey
• [PATCH 1/3] pci: Update the highest subordinate bus number for bridge setup   Tim Harvey
• [PATCH V2 24/24] ARM: imx8m: verdin-imx8mm: Enable USB Host support   Tim Harvey
• [PATCH V2 24/24] ARM: imx8m: verdin-imx8mm: Enable USB Host support   Tim Harvey
• [PATCH V2 24/24] ARM: imx8m: verdin-imx8mm: Enable USB Host support   Tim Harvey
• [PATCH V2 24/24] ARM: imx8m: verdin-imx8mm: Enable USB Host support   Tim Harvey
• [PATCH V2 24/24] ARM: imx8m: verdin-imx8mm: Enable USB Host support   Tim Harvey
• [PATCH] usb: ehci-mx6: Limit PHY address parsing to !CONFIG_PHY   Tim Harvey
• [PATCH 1/3] usb: ehci-mx6: move mode set/detect to probe   Tim Harvey
• [PATCH 2/3] usb: ehci-mx6: add IMX8MM OTG support   Tim Harvey
• [PATCH 3/3] configs: imx8mm_venice_defconfig: add usb support   Tim Harvey
• [PATCH 2/3] usb: ehci-mx6: add IMX8MM OTG support   Tim Harvey
• [PATCH 1/3] usb: ehci-mx6: move mode set/detect to probe   Tim Harvey
• [PATCH 2/3] usb: ehci-mx6: add IMX8MM OTG support   Tim Harvey
• [PATCH 6/6] net: octeontx: smi: fix mii probe   Tim Harvey
• [PATCH 6/6] net: octeontx: smi: fix mii probe   Tim Harvey
• [PATCH] fdtdec: fdtdec_get_aliases_highest_id: skip aliases to disabled nodes   Tim Harvey
• [PATCH 1/2] of: addr: Abort address translation for parent nodes missing 'ranges'   Rob Herring
• [PATCH 1/2] of: addr: Abort address translation for parent nodes missing 'ranges'   Rob Herring
• [PATCH v2 1/2] env: allow environment to be amended from control dtb   Joe Hershberger
• [PATCH v2 2/2] sandbox: add test of CONFIG_ENV_IMPORT_FDT   Joe Hershberger
• [PATCH 06/13] pci: synquacer: Add SynQuacer ECAM based PCIe driver   Masami Hiramatsu
• [PATCH 10/13] ARM: dts: synquacer: Add device trees for DeveloperBox   Masami Hiramatsu
• [PATCH 11/13] board: synquacer: Add DeveloperBox 96boards EE support   Masami Hiramatsu
• [PATCH 11/13] board: synquacer: Add DeveloperBox 96boards EE support   Masami Hiramatsu
• [PATCH 11/13] board: synquacer: Add DeveloperBox 96boards EE support   Masami Hiramatsu
• [PATCH 03/13] dm: pci: Skip setting VGA bridge bits if parent device is the host bus   Masami Hiramatsu
• [PATCH 01/13] pci: Update the highest subordinate bus number for bridge setup   Masami Hiramatsu
• [PATCH 01/13] pci: Update the highest subordinate bus number for bridge setup   Masami Hiramatsu
• [PATCH 10/13] ARM: dts: synquacer: Add device trees for DeveloperBox   Masami Hiramatsu
• [PATCH 1/3] pci: Update the highest subordinate bus number for bridge setup   Masami Hiramatsu
• [PATCH 1/3] pci: Update the highest subordinate bus number for bridge setup   Masami Hiramatsu
• [PATCH v2 00/13] arm64: synquacer: Add SynQuacer/DeveloperBox support   Masami Hiramatsu
• [PATCH v2 01/13] ata: ahci-pci: Use scsi_ops to initialize ops   Masami Hiramatsu
• [PATCH v2 02/13] dm: pci: Skip setting VGA bridge bits if parent device is the host bus   Masami Hiramatsu
• [PATCH v2 03/13] efi: Fix to use null handle to create new handle for efi_fmp_raw   Masami Hiramatsu
• [PATCH v2 04/13] gpio: Introduce CONFIG_ONLY_GENERIC_GPIO to cleanup #ifdefs   Masami Hiramatsu
• [PATCH v2 05/13] mtd: spi-nor-ids: add support for Macronix mx25u51245g and mx66u1g45g flash   Masami Hiramatsu
• [PATCH v2 06/13] pci: synquacer: Add SynQuacer ECAM based PCIe driver   Masami Hiramatsu
• [PATCH v2 07/13] mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driver   Masami Hiramatsu
• [PATCH v2 08/13] spi: synquacer: Add HSSPI SPI controller driver for SynQuacer   Masami Hiramatsu
• [PATCH v2 09/13] net: synquacer: Add netsec driver   Masami Hiramatsu
• [PATCH v2 10/13] ARM: dts: synquacer: Add device trees for DeveloperBox   Masami Hiramatsu
• [PATCH v2 11/13] board: synquacer: Add DeveloperBox 96boards EE support   Masami Hiramatsu
• [PATCH v2 12/13] doc: qemu: arm64: Fix the documentation of capsule update   Masami Hiramatsu
• [PATCH v2 13/13] configs: synquacer: Enable EFI capsule update support   Masami Hiramatsu
• [PATCH v2 12/13] doc: qemu: arm64: Fix the documentation of capsule update   Masami Hiramatsu
• [PATCH v2 07/13] mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driver   Masami Hiramatsu
• [PATCH v2 05/13] mtd: spi-nor-ids: add support for Macronix mx25u51245g and mx66u1g45g flash   Masami Hiramatsu
• [PATCH v2 11/13] board: synquacer: Add DeveloperBox 96boards EE support   Masami Hiramatsu
• [PATCH 5/5] Makefile: Add provision for embedding public key in platform's dtb   Masami Hiramatsu
• [PATCH v2 04/13] gpio: Introduce CONFIG_ONLY_GENERIC_GPIO to cleanup #ifdefs   Masami Hiramatsu
• [PATCH 0/6] Allwinner H6 USB3 support   Samuel Holland
• [PATCH v2 0/4] Allwinner H6 USB3 support   Samuel Holland
• [PATCH v2 1/4] phy: sun50i-usb3: Add a driver for the H6 USB3 PHY   Samuel Holland
• [PATCH v2 2/4] usb: xhci-pci: Move reset logic out of XHCI core   Samuel Holland
• [PATCH v2 3/4] usb: xhci-dwc3: Add support for clocks/resets   Samuel Holland
• [PATCH v2 4/4] configs: Enable USB3 on Allwinner H6 boards   Samuel Holland
• [PATCH] arm: zimage: Use correct symbol to hide messages in SPL   Samuel Holland
• [PATCH] sunxi-common: support loading compressed kernel images on ARMv8   Samuel Holland
• [linux-sunxi] [PATCH] net: sun8i-emac: Fix pinmux setup for Allwinner H5   Samuel Holland
• [PATCH] sunxi-common: support loading compressed kernel images on ARMv8   Samuel Holland
• [PATCH] MAINTAINERS: Add allwinner/sunxi driver directories   Samuel Holland
• [PATCH] sunxi: Select environment MMC based on boot device   Samuel Holland
• [PATCH] sunxi: Load sun8i secure monitor to SRAM A2   Samuel Holland
• [PATCH v2 2/4] usb: xhci-pci: Move reset logic out of XHCI core   Samuel Holland
• [PATCH 1/2] gpio: atmel_pio4: add support for sama7g5 pio4 version with 5 banks   Eugen Hristev
• [PATCH 2/2] ARM: dts: at91: sama7g5: change pinctrl compatible to sama7g5   Eugen Hristev
• [PATCH] configs: sama7g5ek: increase bootm len   Eugen Hristev
• [PATCH v2 00/17] TI/Cadence: Add Sierra/Torrent SERDES driver   Kishon Vijay Abraham I
• [PATCH v2 01/17] dm: core: Add helper to compare node names   Kishon Vijay Abraham I
• [PATCH v2 02/17] dm: test: Add test case to check node name ignoring unit address   Kishon Vijay Abraham I
• [PATCH v2 03/17] drivers: reset: Handle gracefully NULL pointers   Kishon Vijay Abraham I
• [PATCH v2 04/17] dt-bindings: phy: Add definitions for additional phy types   Kishon Vijay Abraham I
• [PATCH v2 05/17] phy: cadence: Add driver for Sierra PHY   Kishon Vijay Abraham I
• [PATCH v2 06/17] phy: cadence: Add driver for Torrent SERDES   Kishon Vijay Abraham I
• [PATCH v2 07/17] phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC   Kishon Vijay Abraham I
• [PATCH v2 08/17] usb: cdns3: cdns3-ti: Fix clk_get_by_name() to get the correct name   Kishon Vijay Abraham I
• [PATCH v2 09/17] board: ti: j721e: Add support for probing and configuring Torrent serdes on J7200   Kishon Vijay Abraham I
• [PATCH v2 10/17] ARM: dts: k3-j721e: Add the entries required for USB3 support on USB0   Kishon Vijay Abraham I
• [PATCH v2 11/17] arm: dts: k3-j7200-main: Add DT node for torrent serdes   Kishon Vijay Abraham I
• [PATCH v2 12/17] arm: dts: k3-j7200-common-proc-board: Enable SERDES DT   Kishon Vijay Abraham I
• [PATCH v2 13/17] arm: dts: k3-j7200-common-proc-board-u-boot: Add u-boot tags for torrent serdes   Kishon Vijay Abraham I
• [PATCH v2 14/17] configs: j721e_evm_a72: Enable the drivers required for the USB3 support   Kishon Vijay Abraham I
• [PATCH v2 15/17] configs: j7200_evm_a72_defconfig: Add config for torrent serdes and common clock framework   Kishon Vijay Abraham I
• [PATCH v2 16/17] env: ti: j721e-evm: Add env variable to power on & reset QSGMII PHY in J7200 EVM   Kishon Vijay Abraham I
• [PATCH v2 17/17] configs: j7200_evm_a72: Enhance bootcmd to configure ethernet PHY   Kishon Vijay Abraham I
• [PATCH] imx: Add support for Ronetix's iMX8MM-CM board   Ilko Iliev
• [PATCH v3] imx: Add support for Ronetix's iMX7-CM board   Ilko Iliev
• [PATCH] board:pm9261 - Enable DM_ETH   Ilko Iliev
• [PATCH v2] board:pm9261 - Enable DM_ETH   Ilko Iliev
• [PATCH] board:pm9263 - Enable DM_ETH   Ilko Iliev
• [PATCH] ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM   Ilko Iliev
• [PATCH v2] board:pm9261 - Enable DM_ETH   Ilko Iliev
• [PATCH v3] board:pm9261 - Remove network support   Ilko Iliev
• [PATCH v2 1/2] board:pm9263 - Switch to use DM_ETH   Ilko Iliev
• [PATCH v2 2/2] board:pm9263 - Fix some typos in comments   Ilko Iliev
• [PATCH 0/5] common: Introduce crypt-style password support   Steffen Jaeckel
• [PATCH 1/5] lib: add crypt subsystem   Steffen Jaeckel
• [PATCH 2/5] common: integrate crypt-based passwords   Steffen Jaeckel
• [PATCH 3/5] common: Rename macro appropriately   Steffen Jaeckel
• [PATCH 4/5] cmd: allow disabling of timeout for password entry   Steffen Jaeckel
• [PATCH 5/5] configs: add new values to bcm963158 defconfig   Steffen Jaeckel
• [PATCH 1/5] lib: add crypt subsystem   Steffen Jaeckel
• [PATCH 2/5] common: integrate crypt-based passwords   Steffen Jaeckel
• [PATCH 4/5] cmd: allow disabling of timeout for password entry   Steffen Jaeckel
• [PATCH v1 0/6] common: Introduce crypt-style password support   Steffen Jaeckel
• [PATCH v1 1/6] lib: add crypt subsystem   Steffen Jaeckel
• [PATCH v1 2/6] lib: wrap crypt API to hide errno usage   Steffen Jaeckel
• [PATCH v1 3/6] common: integrate crypt-based passwords   Steffen Jaeckel
• [PATCH v1 4/6] common: Rename macro appropriately   Steffen Jaeckel
• [PATCH v1 5/6] cmd: allow disabling of timeout for password entry   Steffen Jaeckel
• [PATCH v1 6/6] configs: add new values to bcm963158 defconfig   Steffen Jaeckel
• [PATCH v4 00/22] ppc: qemu: Add eTSEC support   Priyanka Jain
• [PATCH 01/11] powerpc: dts: t2080: add QorIQ DPAA 1 FMan v3 nodes   Priyanka Jain
• [PATCH v4 21/22] ppc: qemu: Enable eTSEC support   Priyanka Jain
• pull request of u-boot-fsl-qoriq for v2021.07   Priyanka Jain
• [PATCH 2/2] Rename CONFIG_DM_RESET to CONFIG_RESET   Priyanka Jain
• [PATCHv3] arm64: gic-v3-its: Clear the Pending table before enabling LPIs   Priyanka Jain
• [PATCH v2 1/4] misc: make CONFIG_IRQ selectable for all platforms   Priyanka Jain
• [PATCH v2 2/4] arch: arm: update Kconfig to select IRQ when GIC_V3_ITS is enabled   Priyanka Jain
• [PATCH v2 3/4] arch: Kconfig: enable IRQ using select for x86 architecture   Priyanka Jain
• [PATCH v2 4/4] sandbox: enable IRQ using select for sandbox architecture   Priyanka Jain
• [PATCH] atcspi200: Add timeout mechanism in spi_xfer()   Dylan Jhong
• [PATCH 2/8] ARM: dragonboard820c: Disable network support   Jorge Ramirez-Ortiz, Gmail
• Running u-boot 2021.04 on Raspberry Pi 4   Nicolas Saenz Julienne
• [PATCH 3/3] snow: Enable unit tests   Minkyu Kang
• [PATCH] ls1012a: net: pfe: remove pfe stop from bootcmd   Mian Yousaf Kaukab
• [PATCH] fit: Fix verification of images with external data   John Keeping
• [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages   Mark Kettenis
• [PATCH] smbios: Fix calculating BIOS Release Date   Mark Kettenis
• 32-bit DMA limit for devices (and drivers)   Mark Kettenis
• [PATCH] armv8: lx2160ardb: Add thermal node fixup for revc board   Wasim Khan
• [PATCH resend] mmc: kconfig: Add CONFIG_SPL_MMC_VERBOSE   Klaus Heinrich Kiwi
• Bugfix for nanopi A64 dts   Dietmar Kling
• [PATCH] efi_loader: fix possible buffer overflow   Masahisa Kojima
• [PATCH 0/2] PE/COFF measurement support   Masahisa Kojima
• [PATCH 1/2] efi_loader: expose efi_image_parse() even if UEFI Secure Boot is disabled   Masahisa Kojima
• [PATCH 2/2] efi_loader: add PE/COFF image measurement   Masahisa Kojima
• [PATCH 2/2] efi_loader: add PE/COFF image measurement   Masahisa Kojima
• [PATCH v2 0/2] PE/COFF measurement support   Masahisa Kojima
• [PATCH v2 1/2] efi_loader: expose efi_image_parse() even if UEFI Secure Boot is disabled   Masahisa Kojima
• [PATCH v2 2/2] efi_loader: add PE/COFF image measurement   Masahisa Kojima
• [PATCH 2/2] efi_loader: add PE/COFF image measurement   Masahisa Kojima
• [PATCH v2 1/2] efi_loader: expose efi_image_parse() even if UEFI Secure Boot is disabled   Masahisa Kojima
• [PATCH v2 1/2] efi_loader: expose efi_image_parse() even if UEFI Secure Boot is disabled   Masahisa Kojima
• [PATCH v3 0/2] PE/COFF measurement support   Masahisa Kojima
• [PATCH v3 1/2] efi_loader: expose efi_image_parse() even if UEFI Secure Boot is disabled   Masahisa Kojima
• [PATCH v3 2/2] efi_loader: add PE/COFF image measurement   Masahisa Kojima
• [PATCH 1/5] clk: ti: add custom API for memory access   Tero Kristo
• [PATCH 1/5] clk: ti: add custom API for memory access   Tero Kristo
• [PATCH v8 26/28] mtd: spi-nor-core: Add non-uniform erase for Spansion/Cypress   Takahiro Kuwano
• [PATCH v5 10/10] mtd: spi-nor-tiny: Add fixups for Cypress s25hl-t/s25hs-t   Takahiro Kuwano
• [PATCH v6 00/14] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   Takahiro Kuwano
• [PATCH v6 00/14] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   Takahiro Kuwano
• [PATCH v6 00/14] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   Takahiro Kuwano
• [PATCH v7 00/14] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   Takahiro Kuwano
• [PATCH v7 00/14] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   Takahiro Kuwano
• [PATCH] cmd: pxe_utils: sysboot: fix crash if either board or soc are not set.   Dimitri John Ledkov
• [PATCH] powerpc, wdt: disable ratelimiting when disabling interrupts   Christophe Leroy
• [PATCH] watchdog: use time_after_eq() in watchdog_reset()   Christophe Leroy
• [v2] armv8: ls1012a: Pass PPFE firmware to Linux through FDT   Biwen Li
• [PATCH v2, 1/2] driver: watchdog: reset watchdog in designware_wdt_stop() function   Li, Meng
• [PATCH v2, 1/2] driver: watchdog: reset watchdog in designware_wdt_stop() function   Li, Meng
• [Patch v2 0/2] Add Xilinx clock wizard driver support   Zhengxun Li
• [Patch v2 1/2] clk: zynq: Add clock wizard driver   Zhengxun Li
• [Patch v2 2/2] board: Add Zynq Mxic picozed development board support   Zhengxun Li
• [PATCH] timer: sifive_clint: Support the official clint DT bindings   Leo Liang
• [PATCH] atcspi200: Add timeout mechanism in spi_xfer()   Leo Liang
• [PATCH v4 0/7] Add FU740 chip and HiFive Unmatched board support   Leo Liang
• [PULL] u-boot-riscv/master   Leo Liang
• U-Boot "lib: Add support for ECDSA image signing" commit breaks socfpga_*_atf_defconfig compilation   Lim, Elly Siew Chin
• [v1 04/17] drivers: clk: Add clock driver for Intel N5X device   Lim, Elly Siew Chin
• [v1 06/17] drivers: clk: Add memory clock driver for Intel N5X device   Lim, Elly Siew Chin
• [PATCH] include: configs: soc64: Use CONFIG_SPL_ATF to differentiate bootfile   Siew Chin Lim
• [v2 00/17] Add Intel N5X SoC support   Siew Chin Lim
• [v2 01/17] arm: socfpga: Move linux_qspi_enable from bootcommand to board_prep_linux function   Siew Chin Lim
• [v2 02/17] arm: socfpga: Changed base_addr_s10.h to base_addr_soc64.h   Siew Chin Lim
• [v2 03/17] arm: socfpga: Add base address for Intel N5X device   Siew Chin Lim
• [v2 04/17] arm: socfpga: Add handoff data support for Intel N5X device   Siew Chin Lim
• [v2 05/17] drivers: clk: Add clock driver for Intel N5X device   Siew Chin Lim
• [v2 06/17] arm: socfpga: Get clock manager base address for Intel N5X device   Siew Chin Lim
• [v2 07/17] drivers: clk: Add memory clock driver for Intel N5X device   Siew Chin Lim
• [v2 08/17] arm: socfpga: Move cm_get_mpu_clk_hz function declaration to clock_manager.h   Siew Chin Lim
• [v2 09/17] arm: socfpga: Add clock manager for Intel N5X device   Siew Chin Lim
• [v2 10/17] arm: socfpga: Changed misc_s10.c to misc_soc64.c   Siew Chin Lim
• [v2 11/17] ddr: socfpga: Enable memory test on memory size less than 1GB   Siew Chin Lim
• [v2 12/17] ddr: altera: Add SDRAM driver for Intel N5X device   Siew Chin Lim
• [v2 13/17] arm: socfpga: Add SPL for Intel N5X device   Siew Chin Lim
• [v2 14/17] board: intel: Add socdk board support for Intel N5X device   Siew Chin Lim
• [v2 15/17] arm: dts: Add base dtsi and devkit dts for Intel N5X device   Siew Chin Lim
• [v2 16/17] include: configs: Add Intel N5X device CONFIGs   Siew Chin Lim
• [v2 17/17] arm: socfpga: Enable Intel N5X device build   Siew Chin Lim
• [PATCH v7 0/2] arm: imx8m: add support for Compulab iot-gate-imx8 (imx8mm-cl-iot-gate)   Ying-Chun Liu
• [PATCH v7 1/2] arm: dts: add imx8mm-cl-iot-gate dts file   Ying-Chun Liu
• [PATCH v7 2/2] arm: imx8m: add support for Compulab iot-gate-imx8 (imx8mm-cl-iot-gate)   Ying-Chun Liu
• [PATCH v8 0/2] arm: imx8m: add support for Compulab iot-gate-imx8 (imx8mm-cl-iot-gate)   Ying-Chun Liu
• [PATCH v8 1/2] arm: dts: add imx8mm-cl-iot-gate dts file   Ying-Chun Liu
• [PATCH v8 2/2] arm: imx8m: add support for Compulab iot-gate-imx8 (imx8mm-cl-iot-gate)   Ying-Chun Liu
• [PATCH] arm: dts: lx2162aqds: support eMMC HS400 mode on esdhc1   Yangbo Lu
• [PATCH] armv8: layerscape: enable eMMC HS400 workarounds for LX2160A/LX2162A   Yangbo Lu
• [PATCH v4 00/10] Add support for extension boards detection and DT overlays application   Kory Maincent
• [PATCH v4 01/10] fdt_support: move fdt_valid from cmd_fdt.c to fdt_support.c   Kory Maincent
• [PATCH v4 02/10] cmd: add support for a new "extension" command   Kory Maincent
• [PATCH v4 03/10] pytest: add sandbox test for "extension" command   Kory Maincent
• [PATCH v4 04/10] ti/common: add support for extension_scan_board function   Kory Maincent
• [PATCH v4 05/10] am57xx: add support for cape detect functionality   Kory Maincent
• [PATCH v4 06/10] w1: replace dt detection by automatic detection   Kory Maincent
• [PATCH v4 07/10] arm: sunxi: add support for DIP detection to CHIP board   Kory Maincent
• [PATCH v4 08/10] configs: CHIP: add support for DIP detect functionality   Kory Maincent
• [PATCH v4 09/10] arm: am335x: add support for i2c2 bus   Kory Maincent
• [PATCH v4 10/10] am335x: add support for cape detect functionality   Kory Maincent
• [PATCH v3 07/10] arm: sunxi: add support for DIP detection to CHIP board   Köry Maincent
• [PATCH v3 07/10] arm: sunxi: add support for DIP detection to CHIP board   Köry Maincent
• [PATCH] efi: Fix ESRT refresh after Capsule update   Jose Marinho
• Kirkwood: Fix tv sec/usec normalization in kwboot   Dagan Martinez
• Kirkwood: Fix tv sec/usec normalization in kwboot   Dagan Martinez
• pcie + nvme + cyclone V   Brian McKee
• ERROR: v7_outer_cache_inval_range - stop address is not aligned - 0x3bf73010   Brian McKee
• [PATCH] timer: sifive_clint: Support the official clint DT bindings   Bin Meng
• [PATCH] configs: qemu-riscv64_spl_defconfig enable CMD_SBI   Bin Meng
• [PATCH 1/1] Azure/GitLab: bump OpenSBI version to 0.9   Bin Meng
• [PATCH 1/3] riscv: mpfs-icicle-kit: Increase SYS_MALLOC_F_LEN   Bin Meng
• [PATCH v4 00/22] ppc: qemu: Add eTSEC support   Bin Meng
• [PATCH v4 4/7] drivers: ram: sifive: rename fu540_ddr and add fu740 support   Bin Meng
• [PATCH v4 7/7] drivers: net: macb: add fu740 support   Bin Meng
• [RFC PATCH v4 1/2] arch: riscv: cpu: Add callback to init each core   Bin Meng
• [RFC PATCH v4 2/2] board: sifive: unmatched: clear feature disable CSR   Bin Meng
• [PATCH v4 4/7] drivers: ram: sifive: rename fu540_ddr and add fu740 support   Bin Meng
• [PATCH] dt-bindings: fsp: Fix Apollo Lake FSP-S devicetree bindings   Bin Meng
• [PATCH] x86: mtrr: Fix function descriptions   Bin Meng
• [PATCH] dt-bindings: fsp: Fix Apollo Lake FSP-S devicetree bindings   Bin Meng
• [PATCH] x86: mtrr: Fix function descriptions   Bin Meng
• [PATCH 02/17] x86: pci: Allow binding of some devices before relocation   Bin Meng
• [PATCH 03/17] x86: Allow coreboot serial driver to guess the UART   Bin Meng
• [PATCH 04/17] spi: ich: Don't require the PCH   Bin Meng
• [PATCH 05/17] tpm: cr50: Drop unnecessary coral headers   Bin Meng
• [PATCH 01/17] pci: Use const for pci_find_device_id() etc.   Bin Meng
• [PATCH 06/17] x86: Don't set up MTRRs if previously done   Bin Meng
• [PATCH 07/17] x86: Update the MP constants to avoid conflicts   Bin Meng
• [PATCH 08/17] x86: Do cache set-up by default when booting from coreboot   Bin Meng
• [PATCH 09/17] x86: coreboot: Show the BIOS date   Bin Meng
• [PATCH 10/17] x86: coral: Allow booting from coreboot   Bin Meng
• [PATCH 11/17] x86: Add function comments to cb_sysinfo.h   Bin Meng
• [PATCH 12/17] x86: coreboot: Use vendor in the Kconfig   Bin Meng
• [PATCH 13/17] x86: coreboot: Enable the cbsysinfo command   Bin Meng
• [PATCH 14/17] x86: coreboot: Document the memory map   Bin Meng
• [PATCH 15/17] x86: Check ROM exists before building vboot   Bin Meng
• [PATCH 17/17] doc: Update documentation for cros-2021.04 release   Bin Meng
• [PATCH RFT v2 0/4] pci: add common Designware PCIe functions and support Amlogic Meson PCIe controller   Bin Meng
• [PATCH v5 8/8] arch: riscv: dts: Set speed of FU740 to 1.2GHz   Bin Meng
• [PATCH 1/1] cmd/exception: support ebreak exception on RISC-V   Bin Meng
• [PATCH v4 21/22] ppc: qemu: Enable eTSEC support   Bin Meng
• [PATCH RFT v2 0/4] pci: add common Designware PCIe functions and support Amlogic Meson PCIe controller   Bin Meng
• [PATCH 03/13] dm: pci: Skip setting VGA bridge bits if parent device is the host bus   Bin Meng
• [PATCH RFT v2 0/4] pci: add common Designware PCIe functions and support Amlogic Meson PCIe controller   Bin Meng
• Please pull u-boot-x86   Bin Meng
• [PATCH v6 5/7] drivers: pci: add pcie support for fu740   Bin Meng
• [PATCH 1/2] riscv: board: Support Openpiton Soc   Bin Meng
• [PATCH 2/2] drivers: mmc: add OpenPiton MMC support   Bin Meng
• [PATCH] smbios: Fix calculating BIOS Release Date   Bin Meng
• [PATCH v4 06/22] net: phy: xilinx: Be compatible with live OF tree   Bin Meng
• [PATCH v4 06/22] net: phy: xilinx: Be compatible with live OF tree   Bin Meng
• [PATCH 03/17] x86: Allow coreboot serial driver to guess the UART   Bin Meng
• [PATCH 03/17] x86: Allow coreboot serial driver to guess the UART   Bin Meng
• USB 3.1 (3.2) support in U-Boot?   Bin Meng
• [PATCH 5/5] Revert "fdt: translate address if #size-cells = <0>"   Bin Meng
• [PATCH] net: phy: xilinx: Break while loop over ethernet phy   Bin Meng
• [PATCH] net: phy: xilinx: Break while loop over ethernet phy   Bin Meng
• [PATCH] net: phy: xilinx: Break while loop over ethernet phy   Bin Meng
• [PATCH] net: phy: xilinx: Break while loop over ethernet phy   Bin Meng
• [PATCH 1/2] doc: develop: Convert README.virtio to reST   Bin Meng
• [PATCH 2/2] MAINTAINERS: Add an entry for VirtIO   Bin Meng
• [PATCH v7 0/8] Add FU740 chip and HiFive Unmatched board support   Bin Meng
• Qemu U-boot Standalone Application Crash   Bin Meng
• [PATCH 03/17] x86: Allow coreboot serial driver to guess the UART   Bin Meng
• [PATCH] Makefile: Fix generation of flash.bin u-boot.itb with binman   Bin Meng
• [PATCH v3 5/7] image-fdt: save no-map parameter of reserve-memory   Bin Meng
• [PATCH v2 1/2] of: addr: Translate 'dma-ranges' for parent nodes missing 'dma-ranges'   Bin Meng
• [PATCH v2 2/2] of: addr: Remove call to dev_count_cells() in of_get_address()   Bin Meng
• [PATCH v2 06/10] spi: dw: Rewrite poll_transfer logic   Damien Le Moal
• [PATCH v3 02/11] clk: k210: Fix PLLs not being enabled   Damien Le Moal
• [PATCH v3 05/11] clk: k210: Move the clint clock to under aclk   Damien Le Moal
• [PATCH v3 05/11] clk: k210: Move the clint clock to under aclk   Damien Le Moal
• [PATCH v3 05/11] clk: k210: Move the clint clock to under aclk   Damien Le Moal
• [PATCH 1/3] pci: pcie_dw_rockchip: Fixed the below compilation error   Anand Moon
• [PATCH 2/3] pci: pcie_dw_rockchip: Drop the unused variable warning   Anand Moon
• [PATCH 3/3] pci: pcie_dw_rockchip: Use udelay instead of msleep   Anand Moon
• [PATCH 1/3] pci: pcie_dw_rockchip: Fixed the below compilation error   Anand Moon
• [PATCH 3/3] pci: pcie_dw_rockchip: Use udelay instead of msleep   Anand Moon
• imxrt1020 EVK u-boot doesn't run.   Nicolás Muratore
• imxrt1020 EVK u-boot doesn't run.   Nicolás Muratore
• [PATCH] Add support for Raspberry Pi 3B+(32bit)   Toshifumi NISHINAGA
• [PATCH] Add support for Raspberry Pi 3B+(32bit)   Toshifumi NISHINAGA
• [PATCH] Add support for Raspberry Pi 3B+(32bit)   Toshifumi NISHINAGA
• [PATCH] Add support for Raspberry Pi 3B+(32bit)   Toshifumi NISHINAGA
• gpmi-nand ecc   Sean Nyekjaer
• [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages   Harb Abdulhamid OS
• [PATCH v4 0/5] psci: add support for SYSTEM_RESET2 and PSCI_FEATURES   Igor Opaniuk
• [PATCH v4 1/5] psci: add v1.0/v1.1 definitions from Linux   Igor Opaniuk
• [PATCH v4 2/5] psci: add features/reset2 support   Igor Opaniuk
• [PATCH v4 3/5] sysreset: psci: use psci driver exported functions   Igor Opaniuk
• [PATCH v4 4/5] sysreset: provide type of reset in do_reset cmd   Igor Opaniuk
• [PATCH v4 5/5] doc: usage: add usage details for reset cmd   Igor Opaniuk
• [PATCH v3 3/4] sysreset: provide type of reset in do_reset cmd   Igor Opaniuk
• [PATCH v3 4/4] doc: usage: add usage details for reset cmd   Igor Opaniuk
• [PATCH v3 3/4] sysreset: provide type of reset in do_reset cmd   Igor Opaniuk
• [RFC PATCH v1] lib: rsa: introduce RSA_SOFTWARE_EXP_TINY   Igor Opaniuk
• [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages   François Ozog
• [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages   François Ozog
• [PATCH] armv8: layerscape: add PSCI support for cpu release   Jiafei Pan
• U-Boot hangs and only shows a big rainbow square on RPi 4B if UART is not enabled   Jian-Hong Pan
• [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages   Manish Pandey2
• [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages   Manish Pandey2
• [PATCH 1/3] clk: mediatek: Add MT8175 clock driver   Fabien Parent
• Locking down U-Boot env with ENV_WRITEABLE_LIST   Joel Peshkin
• [PATCH v9] Add support for stack-protector   Joel Peshkin
• [PATCH 1/4] arm: mvebu: armada-3720-uDPU.dts: Change back to phy-mode "2500base-x"   Jakov Petrina
• Do make sense an u-boot installer?   Alberto Planas
• Ethernet Gadget on STM32MP1 not working   Herbert Poetzl
• Serial console via USB (USBTTY) ...   Herbert Poetzl
• Serial console via USB (USBTTY) ...   Herbert Poetzl
• Serial console via USB (USBTTY) ...   Herbert Poetzl
• [EXT] [PATCH v1 05/10] net: mvpp2: Fix 2.5G GMII_SPEED configurations   Kostya Porotchkin
• [PATCH v2 12/19] video: sunxi: de2: switch to DT probing   Andre Przywara
• [PATCH v2 11/19] video: sunxi: dw-hdmi: read address from DT node   Andre Przywara
• [PATCH v2 13/19] video: sunxi: de2: read address from DT node   Andre Przywara
• [PATCH 0/6] highbank: Update to driver model   Andre Przywara
• [PATCH 1/6] arm: highbank: Limit FDT and initrd load addresses   Andre Przywara
• [PATCH 2/6] arm: highbank: Enable OF_CONTROL   Andre Przywara
• [PATCH 3/6] net: calxedagmac: Convert to DM_ETH   Andre Przywara
• [PATCH 4/6] arm: highbank: Remove artificial SDRAM size   Andre Przywara
• [PATCH 5/6] arm: highbank: Do DRAM init from DT   Andre Przywara
• [PATCH 6/6] arm: highbank: Update maintainership   Andre Przywara
• [GIT PULL] sunxi: First changes for v2021.07 merge window   Andre Przywara
• [PATCH] net: sun8i-emac: Fix pinmux setup for Allwinner H5   Andre Przywara
• [PATCH] sunxi: Bring back SD card as MMC device 0   Andre Przywara
• [PATCH] sunxi-common: support loading compressed kernel images on ARMv8   Andre Przywara
• [PATCH] sunxi: Select environment MMC based on boot device   Andre Przywara
• [PATCH] arm: allwinner: r40: update R40 DT files from linux 5.12-rc1   Andre Przywara
• [PATCH] sunxi: DT: A64: update devicetree files   Andre Przywara
• [PATCH v2 2/4] usb: xhci-pci: Move reset logic out of XHCI core   Andre Przywara
• [PATCH v2 3/4] usb: xhci-dwc3: Add support for clocks/resets   Andre Przywara
• [PATCH v2 4/4] configs: Enable USB3 on Allwinner H6 boards   Andre Przywara
• [PATCH v2 0/4] Allwinner H6 USB3 support   Andre Przywara
• [PATCH] MAINTAINERS: Add allwinner/sunxi driver directories   Andre Przywara
• [PATCH v2 2/4] usb: xhci-pci: Move reset logic out of XHCI core   Andre Przywara
• [PATCH v3 0/9] video: sunxi: rework DE2 driver   Andre Przywara
• [PATCH v3 1/9] video: sunxi: Add mode_valid callback to sunxi_dw_hdmi   Andre Przywara
• [PATCH v3 2/9] common: edid: check for digital display earlier   Andre Przywara
• [PATCH v3 3/9] common: edid: extract code for detailed timing search   Andre Przywara
• [PATCH v3 4/9] common: edid: Search for valid timing in extension block   Andre Przywara
• [PATCH v3 5/9] video: sunxi: Use DW-HDMI hpd function   Andre Przywara
• [PATCH v3 6/9] video: sunxi: Remove check for ddc-i2c-bus property   Andre Przywara
• [PATCH v3 7/9] video: sunxi: Remove TV probe from DE2   Andre Przywara
• [PATCH v3 8/9] video: sunxi: dw-hdmi: read source_id later   Andre Przywara
• [PATCH v3 9/9] video: sunxi: de2: switch to public uclass functions   Andre Przywara
• [PATCH] sunxi: DT: A64: update devicetree files   Andre Przywara
• [PATCH] sunxi: Bring back SD card as MMC device 0   Andre Przywara
• [GIT PULL] sunxi: Remaining v2021.07 merge window changes   Andre Przywara
• [PATCH] sunxi: Bring back SD card as MMC device 0   Andre Przywara
• [PATCH] sunxi: board: Add H616 MMC2 pins   Andre Przywara
• [PATCH] usb: musb-new: Extend Allwinner quirk to newer SoCs   Andre Przywara
• [PATCH] usb: musb-new: Extend Allwinner quirk to newer SoCs   Andre Przywara
• [PATCH] sunxi: clock: H6/H616: Fix PLL6 clock calculation   Andre Przywara
• [PATCH] sunxi: H616: Enable full 4GB of DRAM   Andre Przywara
• 32-bit DMA limit for devices (and drivers)   Andre Przywara
• 32-bit DMA limit for devices (and drivers)   Andre Przywara
• Bugfix for nanopi A64 dts   André Przywara
• [u-boot-fslc] enable d-cache in SPL for i.MX6   Asfak Rahman
• gpmi-nand ecc   Miquel Raynal
• [PATCH 0/7] GE Board fixes and cleanups   Sebastian Reichel
• [PATCH 1/7] board: ge: bx50v3: fix crystal bit   Sebastian Reichel
• [PATCH 2/7] board: ge: bx50v3: add phy reset GPIO   Sebastian Reichel
• [PATCH 3/7] configs: ge: bx50v3: adjust watchdog period   Sebastian Reichel
• [PATCH 4/7] configs: ge: use non-persistent environment   Sebastian Reichel
• [PATCH 5/7] include: configs: ge: bx50v3: drop USB boot   Sebastian Reichel
• [PATCH 6/7] include: configs: ge: simplify default boot command   Sebastian Reichel
• [PATCH 7/7] include: configs: ge: avoid shell on boot failure   Sebastian Reichel
• SAMA5D3 Xplained: SPL broken after panic added to /lib/time.c:94   Manuel Reis
• [PATCH] add u-boot properties to sama5d3 pit timer   Manuel Reis
• [PATCH v2] ARM: dts: at91: sama5d3: add u-boot properties to sama5d3 pit timer   Manuel Reis
• SAMA5D3 Xplained: SPL broken after panic added to /lib/time.c:94   Manuel Luís Reis
• SAMA5D3 Xplained: SPL broken after panic added to /lib/time.c:94   Manuel Luís Reis
• SAMA5D3 Xplained: SPL broken after panic added to /lib/time.c:94   Manuel Luís Reis
• SAMA5D3 Xplained: SPL broken after panic added to /lib/time.c:94   Manuel Luís Reis
• SAMA5D3 Xplained: SPL broken after panic added to /lib/time.c:94   Manuel Luís Reis
• [PATCH v2] ARM: dts: at91: sama5d3: add u-boot properties to sama5d3 pit timer   Manuel Luís Reis
• [PATCH v2] ARM: dts: at91: sama5d3: add u-boot properties to sama5d3 pit timer   Manuel Luís Reis
• [PATCH V2] spi: Update speed/mode on change   Tom Rini
• [PATCH V2] spi: Update speed/mode on change   Tom Rini
• [2021.04 URGENT PATCH] Makefile: Remove idiotic ominous messages   Tom Rini
• [PATCH] Makefile: Silence the deprecation script   Tom Rini
• Pull request for efi-2021-04-rc6   Tom Rini
• [PATCH] sphinx: Pin to docutils-0.16   Tom Rini
• [PATCH 1/1] cmd: CMD_USB depends on USB   Tom Rini
• [PATCH] sphinx: Pin to docutils-0.16   Tom Rini
• [PATCH v8 01/28] spi: spi-mem: allow specifying whether an op is DTR or not   Tom Rini
• [PATCH] imx8mn_ddr4_evk: Allow booting the kernel by default   Tom Rini
• [PATCH] imx8mn_ddr4_evk: Allow booting the kernel by default   Tom Rini
• [PATCH v8 01/28] spi: spi-mem: allow specifying whether an op is DTR or not   Tom Rini
• [ANN] U-Boot v2021.04 released   Tom Rini
• [ANN] U-Boot v2021.04 released   Tom Rini
• [PATCH 1/1] requirements.txt: pin docutils   Tom Rini
• [ANN] U-Boot v2021.04 released   Tom Rini
• Pull request: rockchip-for-v2021.07   Tom Rini
• Please pull u-boot-dm   Tom Rini
• Please pull u-boot-cfi-flash/master   Tom Rini
• Please pull u-boot-marvell/master (watchdog related)   Tom Rini
• [PULL u-boot] Please pull u-boot-amlogic-20210406   Tom Rini
• [PULL] u-boot-usb/master   Tom Rini
• [PULL] please pull mmc-2021-4-6   Tom Rini
• [PATCH] fs: ext4: Add metadata checksums support   Tom Rini
• [PATCH 1/2] of: addr: Abort address translation for parent nodes missing 'ranges'   Tom Rini
• [PATCH] tools: Integrate the Dockerfile used for CI   Tom Rini
• [PATCH] JFFS2: fix the reading address over nand's limit   Tom Rini
• [PATCH] JFFS2: fix jffs2 summary datacrc status uninitialized   Tom Rini
• [PATCH] Azure: Rework SH / Renesas job   Tom Rini
• [PATCH 1/5] GitLab: Remove "tags" stanzas   Tom Rini
• [PATCH 2/5] pytest: Lower pygit2 requirement   Tom Rini
• [PATCH 1/1] Azure/GitLab: bump OpenSBI version to 0.9   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• [PULL] u-boot-riscv/master   Tom Rini
• Pull request: u-boot-imx u-boot-imx-20210409   Tom Rini
• mkimage regression when building ARCH=mips defconfig Linux kernel   Tom Rini
• [PATCH] Revert "spl: Drop bd_info in the data section"   Tom Rini
• [PATCH v9] Add support for stack-protector   Tom Rini
• [GIT PULL] SoCFPGA changes for v2021.07-rc1   Tom Rini
• [PULL] Pull request for u-boot master / v2021.07 = u-boot-stm32-20210409   Tom Rini
• [PATCH 01/13] arm: nanopi2: Remove unused code   Tom Rini
• Pull request for efi-2021-07-rc1   Tom Rini
• Please pull u-boot-video   Tom Rini
• [BUG][Cyrus BOARD] out of bound access in board/varisys/common/sys_eeprom.c   Tom Rini
• [PATCH 01/16] ls1012aqds_tfa_SECURE_BOOT: Remove unused CONFIG_SCSI_AHCI   Tom Rini
• [PATCH 02/16] am57xx_hs_evm_usb: Enable AHCI and BLK   Tom Rini
• [PATCH 03/16] ata: DWC_AHSATA depends on BLK   Tom Rini
• [PATCH 06/16] arm: Remove dms-ba16 board   Tom Rini
• [PATCH 07/16] arm: Remove ot1200 board   Tom Rini
• [PATCH 09/16] ppc: Remove MPC8349ITX board   Tom Rini
• [PATCH 15/16] drivers: ata: Remove mvsata_ide driver   Tom Rini
• [PATCH 01/57] arm: Remove xfi3 board   Tom Rini
• [PATCH 03/57] arm: Remove SANSA_FUZE_PLUS board   Tom Rini
• [PATCH 04/57] arm: Remove sc_sps_1 board   Tom Rini
• [PATCH 05/57] arm: Remove ts4600 board   Tom Rini
• [PATCH 06/57] arm: Remove apf27 board   Tom Rini
• [PATCH 10/57] arm: Remove vexpress_ca15_tc2 board   Tom Rini
• [PATCH 11/57] arm: Remove secomx6quq7 board   Tom Rini
• [PATCH 12/57] arm: Remove s32v234evb board   Tom Rini
• [PATCH 13/57] arm: Remove bcm958712k board   Tom Rini
• [PATCH 14/57] arm: Remove wb45n board   Tom Rini
• [PATCH 15/57] arm: Remove wb50n board   Tom Rini
• [PATCH 16/57] arm: Remove picosam9g45 board   Tom Rini
• [PATCH 17/57] arm: Remove bcm28155_ap board   Tom Rini
• [PATCH 18/57] arm: Remove bcm23550_w1d board   Tom Rini
• [PATCH 20/57] arm: Remove Broadcom Cygnus boards   Tom Rini
• [PATCH 21/57] arm: Remove platinum_picon board   Tom Rini
• [PATCH 24/57] arm: Remove tricorder board   Tom Rini
• [PATCH 25/57] arm: Remove omap3_ha board   Tom Rini
• [PATCH 26/57] arm: Remove am3517_crane board   Tom Rini
• [PATCH 27/57] arm: Remove kc1 board   Tom Rini
• [PATCH 29/57] arm: Remove xpress board   Tom Rini
• [PATCH 31/57] arm: Remove zc5202 and zc5601 boards   Tom Rini
• [PATCH 32/57] arm: Remove pfla02 board   Tom Rini
• [PATCH 34/57] arm: Remove mx53evk board   Tom Rini
• [PATCH 36/57] arm: Remove ts4800 board   Tom Rini
• [PATCH 37/57] arm: Remove titanium board   Tom Rini
• [PATCH 38/57] arm: Remove cgtqmx6eval board   Tom Rini
• [PATCH 39/57] arm: Remove mx6dlarm2 board   Tom Rini
• [PATCH 41/57] arm: Remove tqma6s_wru4_mmc config   Tom Rini
• [PATCH 43/57] ppc: Remove TARGET_T1040QDS references   Tom Rini
• [PATCH 44/57] ppc: Remove T2081QDS board and ARCH_T2081 support   Tom Rini
• [PATCH 45/57] ppc: Remove MPC8308RDB board   Tom Rini
• [PATCH 46/57] ppc: Remove gdsys strider boards   Tom Rini
• [PATCH 47/57] ppc: Remove gdsys hrcon boards   Tom Rini
• [PATCH 48/57] ppc: Remove controlcenterd boards   Tom Rini
• [PATCH 49/57] ppc: Remove ARCH_P1022 support   Tom Rini
• [PATCH 53/57] ppc: Remove Cyrus_P5020 and P5040 boards   Tom Rini
• [PATCH 54/57] ppc: Remove MPC837XEMDS board   Tom Rini
• [PATCH 1/6] arm: highbank: Limit FDT and initrd load addresses   Tom Rini
• [PATCH] Revert "spl: Drop bd_info in the data section"   Tom Rini
• [PATCH] Revert "spl: Drop bd_info in the data section"   Tom Rini
• [PATCH] Revert "spl: Drop bd_info in the data section"   Tom Rini
• [PATCH] Revert "spl: Drop bd_info in the data section"   Tom Rini
• [PATCH] Revert "spl: Drop bd_info in the data section"   Tom Rini
• [PATCH] cmd: fs: Use part_get_info_by_dev_and_name_or_num to parse partitions   Tom Rini
• Getting rid of falcon mode   Tom Rini
• [PATCH 2/3] fit: Use hash.c to call SHA code   Tom Rini
• Getting rid of falcon mode   Tom Rini
• [PATCH 1/2] board: warp: add power_max77696_init() function   Tom Rini
• [PATCH 2/2] power: pmic: remove pmic_max77696.c file   Tom Rini
• [PATCH] lib: optee: migration optee_copy_fdt_nodes for OF_LIVE support   Tom Rini
• [PATCH 1/3] hw_sha: Fix coding style errors   Tom Rini
• [PATCH 3/3] hash: Allow for SHA512 hardware implementations   Tom Rini
• [PATCH] bootm: do not hang on failure   Tom Rini
• [PATCH] Tegra: remove e2220-1170 board   Tom Rini
• [PATCH] mtd: Update fail_addr when erase fails due to bad blocks   Tom Rini
• [PATCH] hush: Fix assignments being misinterpreted as commands   Tom Rini
• [PATCH] pci: Mark 64bit Memory BARs as such   Tom Rini
• [PATCH] cmd: xtrace: Convert to bool   Tom Rini
• [PATCH] disk: gpt: verify alternate LBA points to last usable LBA   Tom Rini
• [PATCH v4 1/5] firmware: scmi: voltage regulator   Tom Rini
• [PATCH v4 2/5] firmware: scmi: sandbox test for voltage regulator   Tom Rini
• [PATCH v4 3/5] firmware: scmi: fix inline comments and minor coding style issues   Tom Rini
• [PATCH v4 4/5] test: scmi: add local variables for scmi agent reference   Tom Rini
• [PATCH v2] rtc: add support for rv3028 rtc   Tom Rini
• [PATCH 1/2] terminal: correct stdio_dev invocations   Tom Rini
• [PATCH 2/2] terminal: only serial_reinit_all if available   Tom Rini
• [PATCH v2] tee: optee: Change printing during optee_probe   Tom Rini
• [PATCH v2 1/5] lib: string: Fix strlcpy return value   Tom Rini
• [PATCH v2 2/5] lib: string: Implement strlcat   Tom Rini
• [PATCH v2 3/5] test: Add test for strlcat   Tom Rini
• [PATCH v2 4/5] fastboot: Fix possible buffer overrun   Tom Rini
• [PATCH v2 5/5] checkpatch: Add warnings for using strn(cat|cpy)   Tom Rini
• [PATCH 2/2] moveconfig.py: add to the "do not process" list   Tom Rini
• [PATCH] scmi: correctly configure MMU for SCMI buffer   Tom Rini
• [PATCH v8 1/4] x86: qemu: move QFW to its own uclass   Tom Rini
• [PATCH v8 2/4] test: qemu: add qfw sandbox driver, dm tests, qemu tests   Tom Rini
• [PATCH v8 3/4] qemu: add MMIO driver for QFW   Tom Rini
• [PATCH v8 4/4] qemu: arm: select QFW, MMIO on qemu-arm   Tom Rini
• [PATCH v7 1/2] gpio: i2c-gpio: Drop use of dm_gpio_set_dir()   Tom Rini
• [PATCH v7 2/2] gpio: Drop dm_gpio_set_dir()   Tom Rini
• [PATCH] scmi: translate the resource only when livetree is not activated   Tom Rini
• [PATCH] [RFC] cmd: exit: Fix return value   Tom Rini
• [PATCH 10/13] ARM: dts: synquacer: Add device trees for DeveloperBox   Tom Rini
• [PATCH 11/13] board: synquacer: Add DeveloperBox 96boards EE support   Tom Rini
• [PATCH v4 21/22] ppc: qemu: Enable eTSEC support   Tom Rini
• [PATCH 10/13] ARM: dts: synquacer: Add device trees for DeveloperBox   Tom Rini
• [PATCH 11/13] board: synquacer: Add DeveloperBox 96boards EE support   Tom Rini
• Getting rid of falcon mode   Tom Rini
• [PULL] u-boot-sh/master   Tom Rini
• Please pull u-boot-x86   Tom Rini
• pull request of u-boot-fsl-qoriq for v2021.07   Tom Rini
• [PATCH v6 01/11] lib: Rename rsa-checksum.c to hash-checksum.c   Tom Rini
• [PATCH v6 02/11] lib/rsa: Make fdt_add_bignum() available outside of RSA code   Tom Rini
• [PATCH v6 03/11] lib: Add support for ECDSA image signing   Tom Rini
• [PATCH v6 04/11] doc: signature.txt: Document devicetree format for ECDSA keys   Tom Rini
• [PATCH v6 05/11] test/py: Add pycryptodomex to list of required pakages   Tom Rini
• [PATCH v6 06/11] test/py: ecdsa: Add test for mkimage ECDSA signing   Tom Rini
• [PATCH v6 07/11] doc: signature.txt: Document the keydir and keyfile arguments   Tom Rini
• [PATCH v6 08/11] mkimage: Add a 'keyfile' argument for image signing   Tom Rini
• [PATCH v6 09/11] lib/rsa: Use the 'keyfile' argument from mkimage   Tom Rini
• [PATCH v6 10/11] lib/ecdsa: Use the 'keydir' argument from mkimage if appropriate   Tom Rini
• [PATCH v6 11/11] test/py: ecdsa: Use mkimage keyfile instead of keydir argument   Tom Rini
• [PATCH v2 1/7] spl: fit: Don't overwrite previous loadable if "load" is missing   Tom Rini
• [PATCH v2 2/7] doc: FIT image: Introduce "u-boot, fpga-legacy" property   Tom Rini
• [PATCH v2 3/7] spl: fit: Move FPGA loading code to separate functions   Tom Rini
• [PATCH v2 4/7] spl: fit: Warn if FIT contains "fpga" property in config node   Tom Rini
• [PATCH v2 5/7] spl: fit: Support loading FPGA images from list of "loadables"   Tom Rini
• [PATCH v2 6/7] Kconfig: Document the limitations of the simple SPL_LOAD_FIT path   Tom Rini
• [PATCH v2 7/7] doc: FIT image: Update FPGA example to make use of "loadables"   Tom Rini
• [PATCH] common: fit: Add weak board_fit_config_name_match   Tom Rini
• [PATCH v3 1/6] spl: LOAD_FIT_FULL: Fix selection of the "fdt" node   Tom Rini
• [PATCH v3 2/6] spl: LOAD_FIT_FULL: Do not hard-code os to IH_OS_U_BOOT   Tom Rini
• [PATCH v3 3/6] spl: LOAD_FIT_FULL: Relocate FDT for u-boot payloads   Tom Rini
• [PATCH v3 4/6] spl: LOAD_FIT_FULL: Support 'kernel' and 'firmware' properties   Tom Rini
• [PATCH v3 5/6] image-fit: Accept IH_TYPE_FIRMWARE in fit_image_load() as valid   Tom Rini
• [PATCH v3 6/6] image-fit: Accept OP-TEE images when booting a FIT   Tom Rini
• [PATCH] lib/rsa: Use EVP_PKEY instead of RSA   Tom Rini
• [GIT PULL] sunxi: First changes for v2021.07 merge window   Tom Rini
• [PATCH] env: increment redund flag on read fail   Tom Rini
• [PATCH] env: Fix warning when forcing environment without ENV_ACCESS_IGNORE_FORCE   Tom Rini
• [PATCH] env/fat.c: support redund environment   Tom Rini
• [PATCH V3] env: Fix invalid env handling in env_init()   Tom Rini
• [PATCH 1/3] env: add ENV_ERASE_PTR macro   Tom Rini
• [PATCH 2/3] env: sf: update the use of macro ENV_SAVE_PTR   Tom Rini
• [PATCH 3/3] env: sf: add support of command env erase   Tom Rini
• [RFC PATCH 1/2] env: sf: add missing spi_flash_free   Tom Rini
• [PATCH resend 1/2] env/sf.c: use a variable to hold the sector size   Tom Rini
• [PATCH resend 2/2] env: add CONFIG_ENV_SECT_SIZE_AUTO   Tom Rini
• [RFC PATCH 2/2] env: sf: remove the static env_flash variable   Tom Rini
• [GIT PULL] TI changes for v2021.07 rc1   Tom Rini
• [PULL] u-boot-usb/master   Tom Rini
• Pull request for efi-2021-07-rc1-2   Tom Rini
• [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]   Tom Rini
• [PATCH] arm64: versal: Remove gd reference   Tom Rini
• [PATCH 00/13] display_options: Start to unify print_buffer() and hexdump   Tom Rini
• [PATCH v2] cmd: gpt: remove redundant print messages   Tom Rini
• [PATCH] Revert "spl: Drop bd_info in the data section"   Tom Rini
• [PULL] u-boot-atmel-2021.07-b   Tom Rini
• [PATCH] Revert "spl: Drop bd_info in the data section"   Tom Rini
• [PATCH] sysinfo.h: Add re-inclusion guard   Tom Rini
• [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]   Tom Rini
• [PATCH v3 5/5] test: Add gpio-sysinfo test   Tom Rini
• [PATCH v3 5/5] test: Add gpio-sysinfo test   Tom Rini
• [PULL u-boot] Please pull u-boot-amlogic-20210419   Tom Rini
• [PATCHv3] arm64: gic-v3-its: Clear the Pending table before enabling LPIs   Tom Rini
• [PATCH v2 1/4] misc: make CONFIG_IRQ selectable for all platforms   Tom Rini
• [PATCH v2 2/4] arch: arm: update Kconfig to select IRQ when GIC_V3_ITS is enabled   Tom Rini
• [PATCH v2 3/4] arch: Kconfig: enable IRQ using select for x86 architecture   Tom Rini
• [PATCH v2 4/4] sandbox: enable IRQ using select for sandbox architecture   Tom Rini
• [PATCH] Fix IDE commands issued, fix endian issues, fix non MMIO   Tom Rini
• [PATCH] lz4: Fix unaligned accesses   Tom Rini
• [PATCH 1/6] arm: octeontx: move CONFIG_SUPPORT_RAW_INITRD to configs   Tom Rini
• [PATCH 2/6] arm: octeontx: support generic distro config   Tom Rini
• [PATCH 3/6] arm: octeontx: enable WDT_SBSA   Tom Rini
• [PATCH 4/6] drivers: net: octeontx: fix QSGMII   Tom Rini
• [PATCH 5/6] drivers: ata: ahci: update max id if it is more than available ports   Tom Rini
• [PATCH 6/6] net: octeontx: smi: fix mii probe   Tom Rini
• [PATCH 1/1] cmd: CONFIG_CMD_MMC depends on CONFIG_MMC   Tom Rini
• [PATCH v5 1/2] power: regulator: add driver for ANATOP regulator   Tom Rini
• [PATCH v5 2/2] doc: device-tree-bindings: regulator: anatop regulator   Tom Rini
• [PATCH 1/6] arm: highbank: Limit FDT and initrd load addresses   Tom Rini
• [PATCH 2/6] arm: highbank: Enable OF_CONTROL   Tom Rini
• [PATCH 3/6] net: calxedagmac: Convert to DM_ETH   Tom Rini
• [PATCH 4/6] arm: highbank: Remove artificial SDRAM size   Tom Rini
• [PATCH 5/6] arm: highbank: Do DRAM init from DT   Tom Rini
• [PATCH 6/6] arm: highbank: Update maintainership   Tom Rini
• [PATCH v4 1/5] psci: add v1.0/v1.1 definitions from Linux   Tom Rini
• [PATCH v4 2/5] psci: add features/reset2 support   Tom Rini
• [PATCH v4 3/5] sysreset: psci: use psci driver exported functions   Tom Rini
• [PATCH v4 4/5] sysreset: provide type of reset in do_reset cmd   Tom Rini
• [PATCH v4 5/5] doc: usage: add usage details for reset cmd   Tom Rini
• [PATCH] toradex: configblock: fix module revision in config block   Tom Rini
• [PATCH v10 1/3] test: fix test/dm/regmap.c   Tom Rini
• [PATCH v10 2/3] x86: correct usage of CFLAGS_NON_EFI   Tom Rini
• [PATCH v10 3/3] Add support for stack-protector   Tom Rini
• [PATCH] sysinfo.h: Add re-inclusion guard   Tom Rini
• [PATCH] test/py: Bump py to 1.10.0 for CVE-2020-29651   Tom Rini
• test: py: CVE-2020-29651 Regular expression deinal of service in py   Tom Rini
• [PATCH] ppc: Remove some SECURE_BOOT defconfigs   Tom Rini
• [PATCH 1/3] boards: Disable CMD_SATA on platforms that no longer have a SATA driver enabled   Tom Rini
• [PATCH 2/3] ata: Make LIBATA means AHCI is enabled mandatory.   Tom Rini
• [PATCH 3/3] DM: DM_MMC migration is now mandatory for non-SPL   Tom Rini
• [PATCH 1/4] ARM: board: udoo_neo: Import UDOO Neo dts files   Tom Rini
• [PATCH 2/4] ARM: imx: udoo_neo: Enable OF_CONTROL and DM gpio/pin control   Tom Rini
• [PATCH 3/4] ARM: imx: udoo_neo: convert to DM_MMC   Tom Rini
• [PATCH 4/4] ARM: imx: udoo_neo: Convert to ethernet DM   Tom Rini
• [PATCH] lib: Move selection of SPL hash algorithms from common/   Tom Rini
• [PATCH v4 2/6] lib: ecdsa: Add skeleton to implement ecdsa verification in u-boot   Tom Rini
• [PULL] u-boot-mips   Tom Rini
• [PULL] u-boot-usb/master   Tom Rini
• [PATCH] test: Alphabetize dm Makefile   Tom Rini
• [PATCH v2 1/8] lmb: move CONFIG_LMB in Kconfig   Tom Rini
• [PATCH v2 2/8] lmb: remove lmb_region.size   Tom Rini
• [PATCH v2 3/8] lmb: add a max parameter in the struct lmb_region   Tom Rini
• [PATCH v2 4/8] lmb: move MAX_LMB_REGIONS value in Kconfig   Tom Rini
• [PATCH v2 5/8] lmb: correct size of the regions array   Tom Rini
• [PATCH v2 6/8] test: lmb: add test for overflow protection in lmb_add_region   Tom Rini
• [PATCH v2 7/8] lmb: Add 2 config to define the max number of regions   Tom Rini
• [PATCH v2 8/8] configs: stm32mp15: increase the number of reserved memory region in lmb   Tom Rini
• [PATCH v2 1/3] cmd: fs: Use part_get_info_by_dev_and_name_or_num to parse partitions   Tom Rini
• [PATCH v2 2/3] part: Fix bogus return from part_get_info_by_dev_and_name   Tom Rini
• [PATCH v2 3/3] test: Add test for partitions   Tom Rini
• [PATCH v2] checkpatch: Ignore ENOSYS warnings   Tom Rini
• Pull request for efi-2021-07-rc1-3   Tom Rini
• [EXTERNAL] Re: [PATCH v2 6/6] test: dm: Add test for ECDSA UCLASS support   Tom Rini
• Pull request for efi-2021-07-rc1-3   Tom Rini
• Please pull u-boot-video   Tom Rini
• [PATCH] test/py: Bump py to 1.10.0 for CVE-2020-29651   Tom Rini
• [PATCH] binman: Correct testSplNoDtb() and Tpl also   Tom Rini
• [PULL] u-boot-mips   Tom Rini
• [GIT PULL] sunxi: Remaining v2021.07 merge window changes   Tom Rini
• [PATCH v4 0/2] allow opting out of WATCHDOG_RESET() from timer interrupt   Tom Rini
• [PULL] u-boot-sh/master   Tom Rini
• [ANN] U-Boot v2021.07-rc1 released   Tom Rini
• [PATCH 0/2] reset: fix reset_get_by_index_nodev index handling   Tom Rini
• Please pull u-boot-marvell/master (watchdog related)   Tom Rini
• [PATCH U-boot v2] fs: btrfs: fix the false alert of decompression failure   Tom Rini
• [PATCH] arm: zimage: Use correct symbol to hide messages in SPL   Tom Rini
• [PATCH 1/2] test: reset: Extend base reset test to catch error   Tom Rini
• [PATCH 2/2] reset: fix reset_get_by_index_nodev index handling   Tom Rini
• [PATCH] Makefile: fix generation of defaultenv.h from empty initial file   Tom Rini
• [PATCH] pinctrl: single: check function mask to be non-zero   Tom Rini
• [PATCH v2] pinctrl: single: fix a never true comparison   Tom Rini
• [PATCH v3] IOMUX: Fix buffer overflow in iomux_replace_device()   Tom Rini
• [PULL u-boot] Please pull u-boot-amlogic-20210428   Tom Rini
• [PULL] u-boot-usb/master   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• Please pull u-boot-cfi-flash/master   Tom Rini
• [GIT PULL] xilinx patches for v2021.07-rc2   Tom Rini
• Please pull u-boot-dm   Tom Rini
• [PATCH] arm: bootm: wrong lmb region reservation when PRAM is used   Tom Rini
• Getting rid of falcon mode   Maxime Ripard
• Getting rid of falcon mode   Maxime Ripard
• Getting rid of falcon mode   Maxime Ripard
• [PATCH v3 07/10] arm: sunxi: add support for DIP detection to CHIP board   Maxime Ripard
• [PATCH] sunxi: Select environment MMC based on boot device   Maxime Ripard
• [PATCH 1/4] ARM: board: udoo_neo: Import UDOO Neo dts files   Peter Robinson
• [PATCH 2/4] ARM: imx: udoo_neo: Enable OF_CONTROL and DM gpio/pin control   Peter Robinson
• [PATCH 3/4] ARM: imx: udoo_neo: convert to DM_MMC   Peter Robinson
• [PATCH 4/4] ARM: imx: udoo_neo: Convert to ethernet DM   Peter Robinson
• [PATCH 1/2] ARM: board: usbarmory: Import the usbarmory dts file   Peter Robinson
• [PATCH 2/2] ARM: board: usbarmory: Convert to OF_CONTROL and DM   Peter Robinson
• [PATCH 1/8] ARM: embestmx6boards: Import the marsboard/riotboard. dts files   Peter Robinson
• [PATCH 2/8] ARM: marsboard: Enable OF_CONTROL and DM gpio/pin control   Peter Robinson
• [PATCH 3/8] ARM: embestmx6boards: merge the riotboard's configs together   Peter Robinson
• [PATCH 4/8] ARM: riotboard: Enable OF_CONTROL and DM gpio/pin control   Peter Robinson
• [PATCH 5/8] ARM: embestmx6boards: convert the mars/riot boards to DM_MMC   Peter Robinson
• [PATCH 6/8] ARM: embestmx6boards: convert mars/riot boards to DM_USB   Peter Robinson
• [PATCH 7/8] ARM: embestmx6boards: convert mars/riot boards to DM_ETH   Peter Robinson
• [PATCH 8/8] ARM: embestmx6boards: convert the mars/riot boards to DM SPI   Peter Robinson
• [PATCH 1/5] ARM: board: udoo: Import UDOO dts files   Peter Robinson
• [PATCH 2/5] ARM: imx: udoo: Enable OF_CONTROL and DM gpio/pin control   Peter Robinson
• [PATCH 3/5] ARM: imx: udoo: drop MTD config   Peter Robinson
• [PATCH 4/5] ARM: imx: udoo: Convert block devices to DM   Peter Robinson
• [PATCH 5/5] ARM: imx: udoo: convert to DM_ETH   Peter Robinson
• [PATCH 1/5] ARM: board: warp: Import dts files   Peter Robinson
• [PATCH 2/5] ARM: board: warp: Enable OF_CONTROL and DM gpio/pin control   Peter Robinson
• [PATCH 3/5] ARM: board: warp: convert to DM_MMC   Peter Robinson
• [PATCH 4/5] ARM: board: warp: convert to DM_USB   Peter Robinson
• [PATCH 5/5] ARM: board: warp7: Minor cleanups and DM_ETH   Peter Robinson
• [PATCH 1/8] ARM: dragonboard410c: Enable DM_ETH   Peter Robinson
• [PATCH 2/8] ARM: dragonboard820c: Disable network support   Peter Robinson
• [PATCH 3/8] ARM: odroid-xu3: Enable DM_ETH   Peter Robinson
• [PATCH 4/8] ARM: odroid: Enable DM_ETH   Peter Robinson
• [PATCH 5/8] ARM: Rock: Disable network support   Peter Robinson
• [PATCH 6/8] ARM: geekbox: Enable the rk3368 network driver   Peter Robinson
• [PATCH 7/8] ARM: sheep-rk3368: Enable the rk3368 network driver   Peter Robinson
• [PATCH 8/8] ARM: CHIP: Enable DM_USB   Peter Robinson
• [PATCH 05/11] arm: dts: imx6qdl-gw*: add dr_mode prop to dt to avoid error   Peter Robinson
• [PATCH] phy: rockchip: inno-usb2: fix hang when multiple controllers exit   Peter Robinson
• [PATCH] Add support for Raspberry Pi 3B+(32bit)   Peter Robinson
• [PATCH] Add support for Raspberry Pi 3B+(32bit)   Peter Robinson
• [PATCH] Revert "usb: kbd: destroy device after console is stopped"   Peter Robinson
• [PATCH] Revert "usb: kbd: destroy device after console is stopped"   Peter Robinson
• [PATCH v3] IOMUX: Fix buffer overflow in iomux_replace_device()   Peter Robinson
• [PATCH] efi_loader: loosen buffer parameter check in efi_file_read_int   Peter Robinson
• [PATCH v2] cfi_flash: Fix detection of 8-bit bus flash devices via address shift   Stefan Roese
• Please pull u-boot-cfi-flash/master   Stefan Roese
• [PATCH 1/3] usb: hub: Fix usb_get_port_status() for big-endian platforms   Stefan Roese
• [PATCH 2/3] usb: xhci: Add missing xhci_readl()   Stefan Roese
• [PATCH 3/3] usb: xhci: Make debug output better readable and checkpatch clean   Stefan Roese
• [PATCH v2 1/4] watchdog: Set/unset GD_FLG_WDT_READY flag in wdt_start()/wdt_stop()   Stefan Roese
• Please pull u-boot-marvell/master (watchdog related)   Stefan Roese
• [PATCH v2 49/50] mips: octeon: Add Octeon PCIe host controller driver   Stefan Roese
• [PATCH v1 00/15] mips: octeon: MIPS Octeon misc updates: NIC23, AHCI, serial-remote tools etc   Stefan Roese
• [PATCH v1 01/15] mips: octeon: Move CVMX_SYNC from octeon_ddr.h to cvmx-regs.h   Stefan Roese
• [PATCH v1 02/15] mips: octeon: cvmx-bootmem: Fix compare in "if" statement   Stefan Roese
• [PATCH v1 03/15] mips: octeon: cvmx-coremask.h: Fix cvmx_coremask_dprint() with DEBUG defined   Stefan Roese
• [PATCH v1 04/15] serial: serial_octeon_pcie_console.c: Add PCI remote console support   Stefan Roese
• [PATCH v1 05/15] serial: serial_octeon_bootcmd.c: Add PCI remote console support   Stefan Roese
• [PATCH v1 06/15] mips: octeon: cpu.c: Add arch_misc_init() for pci-console & pci-bootcmd   Stefan Roese
• [PATCH v1 07/15] mips: octeon: cpu.c: Enable AHCI/SATA support   Stefan Roese
• [PATCH v1 08/15] sata: ahci_mvebu.c: Enable AHCI/SATA driver for MIPS Octeon   Stefan Roese
• [PATCH v1 09/15] ata: ahci: Fix usage on big-endian platforms   Stefan Roese
• [PATCH v1 10/15] scsi: Add ata_swap_buf_le16() to support big-endian platforms   Stefan Roese
• [PATCH v1 11/15] mips: octeon: mrvl, cn73xx.dtsi: Add AHCI/SATA DT node   Stefan Roese
• [PATCH v1 12/15] mips: octeon: Add Octeon III NIC23 board support   Stefan Roese
• [PATCH v1 13/15] mips: octeon: dts/dtsi: Change UART DT node to use clocks property   Stefan Roese
• [PATCH v1 14/15] mips: octeon: ebb7304: Add support for some I2C devices   Stefan Roese
• [PATCH v1 15/15] mips: octeon: octeon_ebb7304_defconfig: Enable USB storage support   Stefan Roese
• [PATCH v2 02/23] phy: marvell: rename comphy related definitions to COMPHY_XX   Stefan Roese
• [EXT] Re: [PATCH v1 02/23] phy: marvell: rename comphy related definitions to COMPHY_XX   Stefan Roese
• [EXT] Re: [PATCH v1 2/5] net: phy: marvell: extend 88E2110 to use both 2.5GHz modes   Stefan Roese
• [PATCH v1 08/23] phy: marvell: add RX training command   Stefan Roese
• [PATCH u-boot-marvell v2 1/4] rtc: add armada38x driver   Stefan Roese
• [PATCH 0/5] Synology DS414 integration mini-review   Stefan Roese
• [PATCH v2 0/8] Convert mvebu_mmc driver to driver model   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH] power: regulator: Add support for regulator-force-boot-off   Stefan Roese
• [PATCH v1 0/6] arm: armada: Add Octeon TX2 CN9130 base support   Stefan Roese
• [PATCH v1 1/6] cmd/mvebu: fix the bubt command   Stefan Roese
• [PATCH v1 2/6] arm: armada: dts: Use a single dtsi for cp110 die description   Stefan Roese
• [PATCH v1 3/6] arm: armada: dts: Add support for ap807-based platforms   Stefan Roese
• [PATCH v1 4/6] arm: armada: configs: Move environment location for mvebu   Stefan Roese
• [PATCH v1 5/6] arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN9130 CRB   Stefan Roese
• [PATCH v1 6/6] arm: octeontx2: Add Octeon TX2 CN9130 CRB support   Stefan Roese
• [PATCH] power: regulator: Add support for regulator-force-boot-off   Stefan Roese
• [PATCH] power: regulator: Add support for regulator-force-boot-off   Stefan Roese
• [PATCH v2] power: regulator: Add support for regulator-force-boot-off   Stefan Roese
• [PATCH] powerpc, wdt: disable ratelimiting when disabling interrupts   Stefan Roese
• [PATCH] arm: at91: gardena-smart-gateway-at91sam: Adjust to production values   Stefan Roese
• [PATCH] mtd: cfi: Fix PPB lock status readout   Stefan Roese
• [PATCH v2 1/2] powerpc: lib: remove leftover CONFIG_5xx   Stefan Roese
• [PATCH v2 2/2] powerpc: introduce CONFIG_CACHE_FLUSH_WATCHDOG_THRESHOLD   Stefan Roese
• [PATCH] watchdog: use time_after_eq() in watchdog_reset()   Stefan Roese
• [PATCH v2 2/2] powerpc: introduce CONFIG_CACHE_FLUSH_WATCHDOG_THRESHOLD   Stefan Roese
• [PATCH] watchdog: use time_after_eq() in watchdog_reset()   Stefan Roese
• [PATCH] cmd: net: add a 'net list' command to list network devs   Stefan Roese
• [PATCH v2 33/50] mips: octeon: Add misc remaining header files   Stefan Roese
• [PATCH v3 33/50] mips: octeon: Add misc remaining header files   Stefan Roese
• [PATCH v2 33/50] mips: octeon: Add misc remaining header files   Stefan Roese
• [PATCH] arm: a37xx: pci: Fix processing PIO transfers   Stefan Roese
• USB 3.1 (3.2) support in U-Boot?   Stefan Roese
• [PATCH] mips: octeon: octeon_ebb7304_defconfig: Fix CFI flash setup   Stefan Roese
• [PATCH 6/6] net: octeontx: smi: fix mii probe   Stefan Roese
• [PATCH 1/2] driver: watchdog: reset watchdog in designware_wdt_stop() function   Stefan Roese
• [PATCH v4 0/2] allow opting out of WATCHDOG_RESET() from timer interrupt   Stefan Roese
• [PATCH] watchdog: use time_after_eq() in watchdog_reset()   Stefan Roese
• Please pull u-boot-marvell/master (watchdog related)   Stefan Roese
• [PATCH 1/4] arm: mvebu: armada-3720-uDPU.dts: Change back to phy-mode "2500base-x"   Stefan Roese
• [PATCH 2/4] arm: octeontx2: cn9130-crb.dtsi: Disable eth2 for now   Stefan Roese
• [PATCH 3/4] net: phy: marvell: Remove PHY_INTERFACE_MODE_SGMII_2500   Stefan Roese
• [PATCH 4/4] net: mvpp2: Remove PHY_INTERFACE_MODE_SGMII_2500   Stefan Roese
• [PATCH 1/4] arm: mvebu: armada-3720-uDPU.dts: Change back to phy-mode "2500base-x"   Stefan Roese
• [PATCH v1 00/10] net: mvpp2: Sync Marvell mvpp2 driver with Marvell version   Stefan Roese
• [PATCH v1 01/10] phy: introduce 1000BaseX and 2500BaseX modes   Stefan Roese
• [PATCH v1 02/10] net: mvpp2: add CP115 port1 10G/5G SFI support   Stefan Roese
• [PATCH v1 03/10] net: mvpp2: add 1000BaseX and 2500BaseX ppv2 support   Stefan Roese
• [PATCH v1 04/10] net: mvpp2: remove redundant SMI address configuration   Stefan Roese
• [PATCH v1 05/10] net: mvpp2: Fix 2.5G GMII_SPEED configurations   Stefan Roese
• [PATCH v1 06/10] net: mvpp2: AN Bypass in 1000 and 2500 basex mode   Stefan Roese
• [PATCH v1 07/10] net: mvpp2: remove unused define MVPP22_SMI_PHY_ADDR_REG   Stefan Roese
• [PATCH v1 08/10] net: mvpp2: fix missing switch case break   Stefan Roese
• [PATCH v1 09/10] net: mvpp2: allow MDIO registration for fixed links   Stefan Roese
• [PATCH v1 10/10] net: mvpp2: add explicit sgmii-2500 support   Stefan Roese
• [EXT] [PATCH v1 05/10] net: mvpp2: Fix 2.5G GMII_SPEED configurations   Stefan Roese
• [PATCH v2, 1/2] driver: watchdog: reset watchdog in designware_wdt_stop() function   Stefan Roese
• [PATCH v2, 1/2] driver: watchdog: reset watchdog in designware_wdt_stop() function   Stefan Roese
• [PATCH v2, 1/2] driver: watchdog: reset watchdog in designware_wdt_stop() function   Stefan Roese
• Kirkwood: Fix tv sec/usec normalization in kwboot   Stefan Roese
• Kirkwood: Fix tv sec/usec normalization in kwboot   Stefan Roese
• [PATCH 6/6] net: octeontx: smi: fix mii probe   Stefan Roese
• [PATCH v1 0/6] arm: armada: Add Octeon TX2 CN9130 base support   Stefan Roese
• [PATCH v2] power: regulator: Add support for regulator-force-boot-off   Stefan Roese
• [PATCH v1 00/23] phy: marvell: Sync Armada 3k/7k/8k SERDES code with Marvell version   Stefan Roese
• [PATCH] arm: a37xx: pci: Fix processing PIO transfers   Stefan Roese
• [PATCH 2/4] arm: octeontx2: cn9130-crb.dtsi: Disable eth2 for now   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH] mtd: cfi: Fix PPB lock status readout   Stefan Roese
• Please pull u-boot-cfi-flash/master   Stefan Roese
• [PATCH v1 00/23] phy: marvell: Sync Armada 3k/7k/8k SERDES code with Marvell version   Stefan Roese
• [PATCH v1 08/10] net: mvpp2: fix missing switch case break   Stefan Roese
• Kirkwood: Fix tv sec/usec normalization in kwboot   Stefan Roese
• [PATCH v1 0/3] spi: Sync Kirkwood SPI driver with Marvell version   Stefan Roese
• [PATCH v1 1/3] spi: kirkwood: support extended baud rates   Stefan Roese
• [PATCH v1 2/3] spi: kirkwood: prevent configuring speed exceeding max controller freq   Stefan Roese
• [PATCH v1 3/3] spi: kirkwood: prevent limiting speed to 0   Stefan Roese
• [PATCH v1 0/4] arm64: mvebu: Sync Marvell armada8k MMU setup with Marvell version   Stefan Roese
• [PATCH v1 1/4] arm64: mvebu: a8k: align memory regions   Stefan Roese
• [PATCH v1 2/4] arm64: mvebu: do not map firmware RT service region   Stefan Roese
• [PATCH v1 3/4] arm64: mvebu: a8k: move firmware related definitions to fw info   Stefan Roese
• [PATCH v1 4/4] arm64: mvebu: extend the mmio region   Stefan Roese
• [PATCH] pcie: designware: mvebu: do not configure ATU for IO when not used   Stefan Roese
• [PATCH] arm: a37xx: pci: Fix processing PIO transfers   Pali Rohár
• [PATCH] smbios: Fix calculating BIOS Release Date   Pali Rohár
• [PATCH] smbios: Fix calculating BIOS Release Date   Pali Rohár
• [PATCH] smbios: Fix calculating BIOS Release Date   Pali Rohár
• [EXTERNAL] Re: [PATCH v2 6/6] test: dm: Add test for ECDSA UCLASS support   Tim Romanski
• [EXTERNAL] Re: [PATCH v2 6/6] test: dm: Add test for ECDSA UCLASS support   Tim Romanski
• [EXTERNAL] Re: [PATCH v2 6/6] test: dm: Add test for ECDSA UCLASS support   Tim Romanski
• RK1808 DDR3 test uboot   Camilo S.
• Boot does not work when changing default dts   Mauro Salvini
• [PATCH] apalis-imx8x: build instructions for module revision v1.1b   Philippe Schenker
• [PATCH] arm: at91: gardena-smart-gateway-at91sam: Adjust to production values   Reto Schneider
• [PATCH v2] arm: at91: gardena-smart-gateway-at91sam: Adjust to production values   Reto Schneider
• MXC I2C recover/idle_bus does not work if CONFIG_DM_I2C is configured   Heiko Schocher
• [PATCH] fastboot: Fix overflow when calculating chunk size   Heiko Schocher
• [PATCH v3 3/4] sysreset: provide type of reset in do_reset cmd   Heinrich Schuchardt
• RISC-V: discard SBI v0.1   Heinrich Schuchardt
• [PATCH V2] doc: mmc man-page   Heinrich Schuchardt
• [PATCH] configs: qemu-riscv64_spl_defconfig enable CMD_SBI   Heinrich Schuchardt
• [PATCH 1/1] Azure/GitLab: bump OpenSBI version to 0.9   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: simplify efi_get_device_path_text()   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: EFI_UNACCEPTED_MEMORY_TYPE   Heinrich Schuchardt
• [BUG] MMC support on MaixDuino   Heinrich Schuchardt
• [PATCH 1/1] cmd: CMD_USB depends on USB   Heinrich Schuchardt
• [PATCH 1/1] requirements.txt: pin docutils   Heinrich Schuchardt
• [RFC] usb_scan_device() only considers first interface   Heinrich Schuchardt
• [RFC 1/1] tegra: video: fix tegra_dc_sor_config_panel()   Heinrich Schuchardt
• [RFC] musb_bulk_rx_nak_timeout()   Heinrich Schuchardt
• Out of bounds access in service_tx_status_request() in musb_gadget_ep0.c   Heinrich Schuchardt
• [PATCH 3/4] sf: doc: Add documentation for the 'sf' command   Heinrich Schuchardt
• [PATCH 2/4] sf: Tidy up code to avoid #ifdef   Heinrich Schuchardt
• [PATCH] efi_loader: efi_esrt: Fix the build warning for 32 bit systems   Heinrich Schuchardt
• [PATCH 1/5] efi_loader: Kconfig: Select IMAGE_SIGN_INFO when capsule authentication is enabled   Heinrich Schuchardt
• [PATCH 0/5] Add support for embedding public key in platform's dtb   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: use correct printf codes   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: esrt: wrong type for LocateHandleBuffer()   Heinrich Schuchardt
• [PATCH 0/5] Add support for embedding public key in platform's dtb   Heinrich Schuchardt
• [PATCH 3/5] efi_capsule: Add a weak function to check whether capsule authentication is enabled   Heinrich Schuchardt
• [PATCH 4/5] efi_capsule: Add a weak function to get the public key needed for capsule authentication   Heinrich Schuchardt
• [PATCH 5/5] Makefile: Add provision for embedding public key in platform's dtb   Heinrich Schuchardt
• [PATCH 1/1] tools/mkeficapsule: improve online help   Heinrich Schuchardt
• [PATCH 2/5] efi_loader: Kconfig: Add symbols for embedding the public key into the platform's dtb   Heinrich Schuchardt
• [PATCH 1/1] cmd/exception: support ebreak exception on RISC-V   Heinrich Schuchardt
• [PATCH] cmd: net: Add the "arp" command   Heinrich Schuchardt
• [PATCH v2] cmd: net: Add the "arp" command   Heinrich Schuchardt
• [PATCH v9] Add support for stack-protector   Heinrich Schuchardt
• [PATCH] efi_loader: esrt: Remove EFI_CALL invocation in efi_esrt_register   Heinrich Schuchardt
• Request for documenting the EFI_{ENTRY,EXIT} functions   Heinrich Schuchardt
• [PATCH v2] efi_loader: esrt: Remove EFI_CALL invocation for efi_create_event   Heinrich Schuchardt
• [PATCH 1/1] board: toradex: apalis-imx8x: fix build warning   Heinrich Schuchardt
• [PATCH 1/1] doc: duplicate target 'youtube'   Heinrich Schuchardt
• Pull request for efi-2021-07-rc1   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: memory leak in efi_capsule_scan_dir()   Heinrich Schuchardt
• [PATCH v10 0/3] Add support for stack-protector   Heinrich Schuchardt
• [PATCH v10 1/3] test: fix test/dm/regmap.c   Heinrich Schuchardt
• [PATCH v10 2/3] x86: correct usage of CFLAGS_NON_EFI   Heinrich Schuchardt
• [PATCH v10 3/3] Add support for stack-protector   Heinrich Schuchardt
• [PATCH] bootm: do not hang on failure   Heinrich Schuchardt
• [PATCH 1/1] doc: imx: psb: fix footnotes   Heinrich Schuchardt
• [BUG][Cyrus BOARD] out of bound access in board/varisys/common/sys_eeprom.c   Heinrich Schuchardt
• [PATCH] efi_loader: esrt: Remove incorrect invocations of EFI_CALL macro   Heinrich Schuchardt
• [PATCH] efi_loader: fix possible buffer overflow   Heinrich Schuchardt
• [PATCH v3 01/28] linker_lists: Fix alignment issue   Heinrich Schuchardt
• [PATCH v4] cmd: net: Add the "arp" command   Heinrich Schuchardt
• [PATCH 1/2] efi_loader: expose efi_image_parse() even if UEFI Secure Boot is disabled   Heinrich Schuchardt
• [PATCH 2/2] efi_loader: add PE/COFF image measurement   Heinrich Schuchardt
• [PATCH 1/1] doc: fatinfo man-page   Heinrich Schuchardt
• [PATCH v2 12/13] doc: qemu: arm64: Fix the documentation of capsule update   Heinrich Schuchardt
• Pull request for efi-2021-07-rc1-2   Heinrich Schuchardt
• [PATCH v2 12/13] doc: qemu: arm64: Fix the documentation of capsule update   Heinrich Schuchardt
• [PATCH] Fix IDE commands issued, fix endian issues, fix non MMIO   Heinrich Schuchardt
• Fwd: New Defects reported by Coverity Scan for efi_capsule.c   Heinrich Schuchardt
• [PATCH] efi: Fix ESRT refresh after Capsule update   Heinrich Schuchardt
• [PATCH 1/1] doc: fatinfo man-page   Heinrich Schuchardt
• [PATCH] efi_loader: capsule: return a corret error code at find_boot_device()   Heinrich Schuchardt
• [PATCH 1/1] tpm: missing event types   Heinrich Schuchardt
• [PATCH 2/2] efi_loader: add PE/COFF image measurement   Heinrich Schuchardt
• [PATCH 2/2] efi_loader: add PE/COFF image measurement   Heinrich Schuchardt
• [PATCH 2/2] efi_loader: add PE/COFF image measurement   Heinrich Schuchardt
• [PATCH] efi_loader: simplify tcg2_create_digest()   Heinrich Schuchardt
• [PATCH] test/py: Fix efidebug related tests   Heinrich Schuchardt
• [PATCH V2] doc: mmc man-page   Heinrich Schuchardt
• [PATCH v2 3/4] efi_capsule: Add a function to get the public key needed for capsule authentication   Heinrich Schuchardt
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Heinrich Schuchardt
• Pull request for efi-2021-07-rc1-3   Heinrich Schuchardt
• [PATCH v2 1/4] efi_loader: capsule: Remove the check for capsule_authentication_enabled environment variable   Heinrich Schuchardt
• [PATCH v2 2/4] efi_loader: Kconfig: Add symbols for embedding the public key into the platform's dtb   Heinrich Schuchardt
• [PATCH v2 1/2] efi_loader: expose efi_image_parse() even if UEFI Secure Boot is disabled   Heinrich Schuchardt
• [PATCH v2 1/2] efi_loader: expose efi_image_parse() even if UEFI Secure Boot is disabled   Heinrich Schuchardt
• [PATCH] efi_loader: loosen buffer parameter check in efi_file_read_int   Heinrich Schuchardt
• [PATCH] efi_loader: loosen buffer parameter check in efi_file_read_int   Heinrich Schuchardt
• [PATCH v3 1/2] efi_loader: expose efi_image_parse() even if UEFI Secure Boot is disabled   Heinrich Schuchardt
• [PATCH V2] efi_loader: loosen buffer parameter check in efi_file_read_int   Heinrich Schuchardt
• [PATCH] arm64: zynqmp: Enable capsule update   Heinrich Schuchardt
• [PATCH 1/1] doc: fatinfo man-page   Heinrich Schuchardt
• [PATCH] efi_loader: check query_variable_info attributes   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: implement non-blocking file services   Heinrich Schuchardt
• [PATCH 1/2] MIPS: remove deprecated qemu_mips board   Daniel Schwierzeck
• [PATCH 2/2] doc: update and fix Qemu MIPS documentation   Daniel Schwierzeck
• [PATCH 0/2] net: jr2: Fix for jr2 switch   Daniel Schwierzeck
• [PATCH] mips: mt7628: fix ddr_type for MT7688KN   Daniel Schwierzeck
• [PATCH] mips: mt7628: fix the displayed DDR type of mt7628   Daniel Schwierzeck
• [PATCH] mips: octeon: octeon_ebb7304_defconfig: Enable USB storage support   Daniel Schwierzeck
• [PULL] u-boot-mips   Daniel Schwierzeck
• [PATCH v2 33/50] mips: octeon: Add misc remaining header files   Daniel Schwierzeck
• [PULL] u-boot-mips   Daniel Schwierzeck
• [PATCH v1 00/50] mips: octeon: Add serdes and device helper support incl. DM PCIe driver   Daniel Schwierzeck
• [PATCH v1 00/15] mips: octeon: MIPS Octeon misc updates: NIC23, AHCI, serial-remote tools etc   Daniel Schwierzeck
• [PATCH] mips: octeon: octeon_ebb7304_defconfig: Fix CFI flash setup   Daniel Schwierzeck
• Running u-boot 2021.04 on Raspberry Pi 4   Roman Shaposhnik
• Running u-boot 2021.04 on Raspberry Pi 4   Roman Shaposhnik
• Running u-boot 2021.04 on Raspberry Pi 4   Roman Shaposhnik
• Serial console via USB (USBTTY) ...   Andy Shevchenko
• Serial console via USB (USBTTY) ...   Andy Shevchenko
• [PATCH v1 1/2] cmd: bind: Fix driver binding on a device   Andy Shevchenko
• [PATCH v1 1/2] cmd: bind: Fix driver binding on a device   Andy Shevchenko
• [PATCH v1 1/2] cmd: bind: Fix driver binding on a device   Andy Shevchenko
• [PATCH v1 1/2] cmd: bind: Fix driver binding on a device   Andy Shevchenko
• [PATCH] Revert "usb: kbd: destroy device after console is stopped"   Andy Shevchenko
• [PATCH] Revert "usb: kbd: destroy device after console is stopped"   Andy Shevchenko
• [PATCH] Revert "usb: kbd: destroy device after console is stopped"   Andy Shevchenko
• [PATCH v2] IOMUX: Fix buffer overflow in iomux_replace_device()   Andy Shevchenko
• [PATCH v3] IOMUX: Fix buffer overflow in iomux_replace_device()   Andy Shevchenko
• [PATCH 03/17] x86: Allow coreboot serial driver to guess the UART   Andy Shevchenko
• [PATCH] efi: Fix Kconfig dependency for EFI_TCG2_PROTOCOL   Michal Simek
• [PATCH] xilinx: Enable GUID partitions and EFI variable commands   Michal Simek
• [PATCH] efi: Fix Kconfig dependency for EFI_TCG2_PROTOCOL   Michal Simek
• [PATCH] xilinx: common: Fix boot script address   Michal Simek
• [PATCH 2/2] board: Add Zynq Mxic picozed development board support   Michal Simek
• [PATCH] clk: Fix typo in Zynq Kconfig symbol description   Michal Simek
• [PATCH 1/2] clk: zynq: Add clock wizard driver   Michal Simek
• [PATCH] arm64: versal: Remove gd reference   Michal Simek
• [PATCH] arm64: versal: Remove gd reference   Michal Simek
• [PATCH v2] arm64: versal: Remove gd reference   Michal Simek
• Possible USB Mass Storage bug on Xilinx's Zynq   Michal Simek
• [PATCH 0/4] xilinx: Enable redundant variables for all Xilinx SoCs   Michal Simek
• [PATCH 0/6] xilinx: Align usb dfu boot mode and bootcommand with distroboot   Michal Simek
• [PATCH] xilinx: common: Fix boot script address   Michal Simek
• [PATCH] xilinx: Enable GUID partitions and EFI variable commands   Michal Simek
• [PATCH] clk: Fix typo in Zynq Kconfig symbol description   Michal Simek
• [PATCH v2] arm64: versal: Remove gd reference   Michal Simek
• [PATCH v4 06/22] net: phy: xilinx: Be compatible with live OF tree   Michal Simek
• [PATCH v4 06/22] net: phy: xilinx: Be compatible with live OF tree   Michal Simek
• [PATCH] spi: zynqmp: Remove gd reference   Michal Simek
• [PATCH] arm64: zynqmp: Enable capsule update   Michal Simek
• [PATCH] net: phy: xilinx: Break while loop over ethernet phy   Michal Simek
• [PATCH] net: phy: xilinx: Break while loop over ethernet phy   Michal Simek
• [PATCH] net: phy: xilinx: Break while loop over ethernet phy   Michal Simek
• [PATCH] net: phy: xilinx: Break while loop over ethernet phy   Michal Simek
• [PATCH] arm64: zynqmp: Enable capsule update   Michal Simek
• [PATCH] net: phy: xilinx: Break while loop over ethernet phy   Michal Simek
• [PATCH] arm64: zynqmp: Enable capsule update   Michal Simek
• [Patch v2 2/2] board: Add Zynq Mxic picozed development board support   Michal Simek
• [Patch v2 1/2] clk: zynq: Add clock wizard driver   Michal Simek
• [PATCH] spi: zynqmp: Remove gd reference   Michal Simek
• [GIT PULL] xilinx patches for v2021.07-rc2   Michal Simek
• [PATCH 1/1] efi_loader: implement non-blocking file services   Michal Simek
• [PATCH 1/1] efi_loader: implement non-blocking file services   Michal Simek
• [PATCH V2] efi_loader: loosen buffer parameter check in efi_file_read_int   Michal Simek
• [PATCH 1/1] board: freescale: vid.c: Add check for return value of adjust_vdd()   Priyanka Singh
• [PATCH 0/3] Improvements to FIT hashing   Joel Stanley
• [PATCH 2/3] fit: Use hash.c to call SHA code   Joel Stanley
• [PATCH] efi_loader: check query_variable_info attributes   Vincent Stehlé
• [PATCH] fs/squashfs: Fix some hardlinks reading the wrong inode   Campbell Suter
• [PATCH 19/19] ARM: imx8m: verdin-imx8mm: Enable USB Host support   Oleksandr Suvorov
• [PATCH] toradex: configblock: fix module revision in config block   Oleksandr Suvorov
• [RESEND PATCH] colibri_imx6: adjust boot order   Oleksandr Suvorov
• [RESEND PATCH] colibri_imx6ull/imx7: add missing tdxargs variable   Oleksandr Suvorov
• [RESEND PATCH] apalis/colibri_imx6: remove video= settings   Oleksandr Suvorov
• [PATCH v2] apalis-imx8x: update build instructions   Oleksandr Suvorov
• [PATCH 1/1] board: toradex: apalis-imx8x: fix build warning   Oleksandr Suvorov
• [PATCH] apalis-imx8x: build instructions for module revision v1.1b   Oleksandr Suvorov
• [PATCH] Makefile: fix generating environment file   Oleksandr Suvorov
• [PATCH v2] Makefile: fix generating environment file   Oleksandr Suvorov
• [PATCH v2] Makefile: fix generating environment file   Oleksandr Suvorov
• [PATCH v2] Makefile: fix generating environment file   Oleksandr Suvorov
• [PATCH v2] Makefile: fix generating environment file   Oleksandr Suvorov
• [PATCH] Makefile: fix generation of defaultenv.h from empty initial file   Oleksandr Suvorov
• [PATCH] arm: dts: stm32mp157c-odyssey-som: enable the RNG1   Grzegorz Szymaszek
• [PATCH 02/16] timer: imx-gpt: Add timer support for i.MX SoCs family   Jesse T
• [PATCH] env/fat.c: support redund environment   AKASHI Takahiro
• [PATCH] efi_loader: capsule: return a corret error code at find_boot_device()   AKASHI Takahiro
• [RFC] efi_loader: improve firmware capsule authentication   AKASHI Takahiro
• [RFC] efi_loader: improve firmware capsule authentication   AKASHI Takahiro
• [RFC] efi_loader: improve firmware capsule authentication   AKASHI Takahiro
• [RFC] efi_loader: improve firmware capsule authentication   AKASHI Takahiro
• [PATCH v2 2/4] efi_loader: Kconfig: Add symbols for embedding the public key into the platform's dtb   AKASHI Takahiro
• [PATCH v2 2/4] efi_loader: Kconfig: Add symbols for embedding the public key into the platform's dtb   AKASHI Takahiro
• [PATCH v2 3/4] efi_capsule: Add a function to get the public key needed for capsule authentication   AKASHI Takahiro
• [PATCH v2 4/4] Makefile: Add provision for embedding public key in platform's dtb   AKASHI Takahiro
• [PATCH 5/5] Makefile: Add provision for embedding public key in platform's dtb   AKASHI Takahiro
• [v1 01/17] arm: socfpga: Changed base_addr_s10.h to base_addr_soc64.h   Tan, Ley Foon
• [v1 02/17] arm: socfpga: Add base address for Intel N5X device   Tan, Ley Foon
• [v1 03/17] arm: socfpga: Add handoff data support for Intel N5X device   Tan, Ley Foon
• [v1 04/17] drivers: clk: Add clock driver for Intel N5X device   Tan, Ley Foon
• [v1 06/17] drivers: clk: Add memory clock driver for Intel N5X device   Tan, Ley Foon
• [v1 05/17] arm: socfpga: Get clock manager base address for Intel N5X device   Tan, Ley Foon
• [v1 07/17] arm: socfpga: Move cm_get_mpu_clk_hz function declaration to clock_manager.h   Tan, Ley Foon
• [GIT PULL] SoCFPGA changes for v2021.07-rc1   Tan, Ley Foon
• [v1 08/17] arm: socfpga: Add clock manager for Intel N5X device   Tan, Ley Foon
• [v1 09/17] arm: socfpga: Changed misc_s10.c to misc_soc64.c   Tan, Ley Foon
• [v1 11/17] ddr: socfpga: Enable memory test on memory size less than 1GB   Tan, Ley Foon
• [v1 10/17] arm: socfpga: Add SDRAM driver helper function for Intel N5X device   Tan, Ley Foon
• [v1 12/17] ddr: altera: Add SDRAM driver for Intel N5X device   Tan, Ley Foon
• [v1 13/17] arm: socfpga: Add SPL for Intel N5X device   Tan, Ley Foon
• [v1 14/17] board: intel: Add socdk board support for Intel N5X device   Tan, Ley Foon
• [v1 15/17] arm: dts: Add base dtsi and devkit dts for Intel N5X device   Tan, Ley Foon
• [v1 16/17] include: configs: Add Intel N5X device CONFIGs   Tan, Ley Foon
• [v1 17/17] arm: socfpga: Enable Intel N5X device build   Tan, Ley Foon
• test: py: CVE-2020-29651 Regular expression deinal of service in py   Tan, Ley Foon
• [PATCH] mmc: dw_mmc: Fixes data read when receiving DTO interrupt in FIFO mode   Ley Foon Tan
• [PATCH] net: phy: micrel: Get phy node from phy-handle   Ley Foon Tan
• [PATCH] mmc: dwmmc: socfpga: Get "fifo-mode" property from DT   Ley Foon Tan
• [PATCH v2 0/5] board: imx8mm: Add Engicam i.Core MX8M Mini SoM   Jagan Teki
• [PATCH v2 1/5] arm64: dts: imx8mm: Add common -u-boot.dtsi   Jagan Teki
• [PATCH 1/2] spi: nxp-fspi: Add support for IP read only   Jagan Teki
• [PATCH 2/2] spi: nxp_fspi: Implement errata workaround for LS1028A   Jagan Teki
• [PATCH] mtd: spi-nor-ids: Add Macronix MX66UW2G345G   Jagan Teki
• [PATCH v2 00/10] spi: dw: Add support for DUAL/QUAD/OCTAL modes   Jagan Teki
• [PATCH v6 00/14] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   Jagan Teki
• [PATCH v2 00/10] spi: dw: Add support for DUAL/QUAD/OCTAL modes   Jagan Teki
• [PATCH] sunxi: Bring back SD card as MMC device 0   Jagan Teki
• [PATCH v6 00/14] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   Jagan Teki
• [PATCH] sunxi: Bring back SD card as MMC device 0   Jagan Teki
• [PATCH] sunxi: board: Add H616 MMC2 pins   Jagan Teki
• [PATCH v6 00/14] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   Jagan Teki
• [PATCH v3 0/4] board: imx8mm: Add Engicam i.Core MX8M Mini SoM   Jagan Teki
• [PATCH v3 1/4] arm64: dts: imx8mm: Add common -u-boot.dtsi   Jagan Teki
• [PATCH v3 2/4] arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini SoM   Jagan Teki
• [PATCH v3 3/4] board: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit   Jagan Teki
• [PATCH v3 4/4] board: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0   Jagan Teki
• [PATCH v6 00/14] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   Jagan Teki
• [PATCH] usb: musb-new: Extend Allwinner quirk to newer SoCs   Jagan Teki
• [PATCH v7 00/14] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   Jagan Teki
• [PATCH] mtd: cfi: Fix PPB lock status readout   Joakim Tjernlund
• [PATCH] configs: ls1046afrwy: Add secure boot config   Manish Tomar
• MXC I2C recover/idle_bus does not work if CONFIG_DM_I2C is configured   Trommel, Kees (Contractor)
• MXC I2C recover/idle_bus does not work if CONFIG_DM_I2C is configured   Trommel, Kees (Contractor)
• [linux-sunxi] [PATCH] sunxi: H616: Enable full 4GB of DRAM   Chen-Yu Tsai
• [PATCH] arm: allwinner: r40: update R40 DT files from linux 5.12-rc1   Ivan Uvarov
• [PATCH V2] spi: Update speed/mode on change   Marek Vasut
• [PATCH V2] spi: Update speed/mode on change   Marek Vasut
• [PATCH V2] spi: Update speed/mode on change   Marek Vasut
• [PATCH 01/19] phy: nop-phy: Add standard usb-nop-xceiv compat string   Marek Vasut
• [PATCH 02/19] arc: emsdp/iotdk: Use standard compatible string for USB no-op PHY   Marek Vasut
• [PATCH 03/19] ARM: dts: k2g-evm: Use standard compatible string for USB no-op PHY   Marek Vasut
• [PATCH 04/19] ARM: dts: imx8mm: Replace deprecated fsl, usbphy DT props with phys   Marek Vasut
• [PATCH 05/19] ARM: dts: imx8mm: Add power domain nodes   Marek Vasut
• [PATCH 06/19] imx: power-domain: Add fsl, imx8mm-gpc compatible string   Marek Vasut
• [PATCH 07/19] usb: ehci-mx6: Turn off Vbus on probe failure   Marek Vasut
• [PATCH 08/19] usb: ehci-mx6: Add DM clock support   Marek Vasut
• [PATCH 09/19] usb: ehci-mx6: Unify USBNC registers   Marek Vasut
• [PATCH 10/19] usb: ehci-mx6: Parse USB PHY and MISC offsets from DT   Marek Vasut
• [PATCH 11/19] usb: ehci-mx6: Split ehci_mx6_common_init()   Marek Vasut
• [PATCH 12/19] usb: ehci-mx6: Pass PHY address to usb_*_phy*()   Marek Vasut
• [PATCH 13/19] usb: ehci-mx6: Split usb_power_config()   Marek Vasut
• [PATCH 14/19] usb: ehci-mx6: Pass MISC address to usb_oc_config()   Marek Vasut
• [PATCH 15/19] usb: ehci-mx6: Use portnr in DM only if PHY is disabled   Marek Vasut
• [PATCH 16/19] usb: ehci-mx6: Add generic EHCI PHY support   Marek Vasut
• [PATCH 17/19] usb: ehci-mx6: Add fsl,imx7d-usb compatible string   Marek Vasut
• [PATCH 18/19] usb: ehci-mx6: Add iMX8M support   Marek Vasut
• [PATCH 19/19] ARM: imx8m: verdin-imx8mm: Enable USB Host support   Marek Vasut
• Locking down U-Boot env with ENV_WRITEABLE_LIST   Marek Vasut
• Locking down U-Boot env with ENV_WRITEABLE_LIST   Marek Vasut
• [PATCH 1/1] cmd: CMD_USB depends on USB   Marek Vasut
• [RFC] usb_scan_device() only considers first interface   Marek Vasut
• [RFC] musb_bulk_rx_nak_timeout()   Marek Vasut
• Out of bounds access in service_tx_status_request() in musb_gadget_ep0.c   Marek Vasut
• Locking down U-Boot env with ENV_WRITEABLE_LIST   Marek Vasut
• [PATCH] [RFC] cmd: exit: Fix return value   Marek Vasut
• [PATCH 1/3] usb: hub: Fix usb_get_port_status() for big-endian platforms   Marek Vasut
• [PULL] u-boot-usb/master   Marek Vasut
• [PATCH 01/19] phy: nop-phy: Add standard usb-nop-xceiv compat string   Marek Vasut
• Locking down U-Boot env with ENV_WRITEABLE_LIST   Marek Vasut
• [PATCH] net: dwc_eth_qos: add support of device tree configuration for reset delay   Marek Vasut
• [PATCH 19/19] ARM: imx8m: verdin-imx8mm: Enable USB Host support   Marek Vasut
• [PATCH V2 01/24] phy: nop-phy: Add standard usb-nop-xceiv compat string   Marek Vasut
• [PATCH V2 02/24] arc: emsdp/iotdk: Use standard compatible string for USB no-op PHY   Marek Vasut
• [PATCH V2 03/24] ARM: dts: k2g-evm: Use standard compatible string for USB no-op PHY   Marek Vasut
• [PATCH V2 04/24] ARM: dts: imx8mm: Replace deprecated fsl, usbphy DT props with phys   Marek Vasut
• [PATCH V2 05/24] ARM: dts: imx8mn: Replace deprecated fsl, usbphy DT props with phys   Marek Vasut
• [PATCH V2 06/24] ARM: dts: imx8mm: Add power domain nodes   Marek Vasut
• [PATCH V2 07/24] ARM: dts: imx8mn: Add power domain nodes   Marek Vasut
• [PATCH V2 08/24] imx: power-domain: Add fsl, imx8mm-gpc compatible string   Marek Vasut
• [PATCH V2 09/24] imx: power-domain: Add fsl, imx8mn-gpc compatible string   Marek Vasut
• [PATCH V2 10/24] usb: ehci-mx6: Turn off Vbus on probe failure   Marek Vasut
• [PATCH V2 11/24] usb: ehci-mx6: Add DM clock support   Marek Vasut
• [PATCH V2 12/24] usb: ehci-mx6: Unify USBNC registers   Marek Vasut
• [PATCH V2 13/24] usb: ehci-mx6: Parse USB PHY and MISC offsets from DT   Marek Vasut
• [PATCH V2 14/24] usb: ehci-mx6: Split ehci_mx6_common_init()   Marek Vasut
• [PATCH V2 15/24] usb: ehci-mx6: Pass PHY address to usb_*_phy*()   Marek Vasut
• [PATCH V2 16/24] usb: ehci-mx6: Split usb_power_config()   Marek Vasut
• [PATCH V2 17/24] usb: ehci-mx6: Pass MISC address to usb_oc_config()   Marek Vasut
• [PATCH V2 18/24] usb: ehci-mx6: Use portnr from DT in DM case   Marek Vasut
• [PATCH V2 19/24] usb: ehci-mx6: Add generic EHCI PHY support   Marek Vasut
• [PATCH V2 20/24] usb: ehci-mx6: Set default CONFIG_MXC_USB_PORTSC if not defined   Marek Vasut
• [PATCH V2 21/24] usb: ehci-mx6: Add fsl,imx7d-usb compatible string   Marek Vasut
• [PATCH V2 22/24] usb: ehci-mx6: Fix aarch64 build warnings   Marek Vasut
• [PATCH V2 23/24] usb: ehci-mx6: Add iMX8M support   Marek Vasut
• [PATCH V2 24/24] ARM: imx8m: verdin-imx8mm: Enable USB Host support   Marek Vasut
• [PATCH 1/1] doc: imx: psb: fix footnotes   Marek Vasut
• [PATCH] doc: imx: psb: Fix missing setexpr arguments   Marek Vasut
• [PATCH] mtd: cfi: Fix PPB lock status readout   Marek Vasut
• [PATCH] ARM: rmobile: Enable CONFIG_SYS_FLASH_PROTECTION   Marek Vasut
• [PATCH] ARM: rmobile: Enable NVMe support on RCar3   Marek Vasut
• [PATCH] ARM: renesas: Scrub duplicate memory nodes from DT on Gen3   Marek Vasut
• [PATCH 1/2] clk: renesas: Only ever access documented bits in clock driver teardown   Marek Vasut
• [PATCH 2/2] clk: renesas: Synchronize Gen2 MSTP teardown tables   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH v2] arm: mach-rmobile: Add CPU info support for RZ/G2   Marek Vasut
• [PATCH] net: dwc_eth_qos: add support of device tree configuration for reset delay   Marek Vasut
• [PATCH 2/2] Rename CONFIG_DM_RESET to CONFIG_RESET   Marek Vasut
• [PATCH V3] env: Fix invalid env handling in env_init()   Marek Vasut
• [PULL] u-boot-usb/master   Marek Vasut
• [PATCH v2 0/4] Allwinner H6 USB3 support   Marek Vasut
• [PATCH V2 24/24] ARM: imx8m: verdin-imx8mm: Enable USB Host support   Marek Vasut
• [PATCH] Revert "usb: kbd: destroy device after console is stopped"   Marek Vasut
• [PULL] u-boot-usb/master   Marek Vasut
• [PATCH V2 24/24] ARM: imx8m: verdin-imx8mm: Enable USB Host support   Marek Vasut
• Pull request for efi-2021-07-rc1-3   Marek Vasut
• Pull request for efi-2021-07-rc1-3   Marek Vasut
• [PATCH] Makefile: Fix generation of flash.bin u-boot.itb with binman   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH V2 24/24] ARM: imx8m: verdin-imx8mm: Enable USB Host support   Marek Vasut
• [PATCH] usb: musb-new: Extend Allwinner quirk to newer SoCs   Marek Vasut
• [PATCH] usb: musb-new: Extend Allwinner quirk to newer SoCs   Marek Vasut
• [PATCH] usb: ehci-mx6: Limit PHY address parsing to !CONFIG_PHY   Marek Vasut
• [PATCH 2/3] usb: ehci-mx6: add IMX8MM OTG support   Marek Vasut
• [PATCH 1/3] usb: ehci-mx6: move mode set/detect to probe   Marek Vasut
• [PATCH 2/3] usb: ehci-mx6: add IMX8MM OTG support   Marek Vasut
• [PATCH 2/3] usb: ehci-mx6: add IMX8MM OTG support   Marek Vasut
• [PATCH 1/3] usb: ehci-mx6: move mode set/detect to probe   Marek Vasut
• [PATCH] usb: ehci-mx6: Limit PHY address parsing to !CONFIG_PHY   Marek Vasut
• [PATCH 01/30] clk: renesas: Synchronize RZ/G2 tables with Linux 5.12   Marek Vasut
• [PATCH 02/30] clk: renesas: Synchronize R-Car Gen2 tables with Linux 5.12   Marek Vasut
• [PATCH 03/30] clk: renesas: Synchronize R-Car Gen3 tables with Linux 5.12   Marek Vasut
• [PATCH 04/30] clk: renesas: Reinstate RPC clock on R-Car D3/E3   Marek Vasut
• [PATCH 05/30] clk: renesas: Fix incorrect return RPC clk_get_rate   Marek Vasut
• [PATCH 06/30] clk: renesas: Fix Realtime Module Stop Control Register offsets   Marek Vasut
• [PATCH 07/30] clk: renesas: Add support for RPCD2 clock   Marek Vasut
• [PATCH 08/30] clk: renesas: Make reset controller modemr register offset configurable   Marek Vasut
• [PATCH 09/30] clk: renesas: Pass struct cpg_mssr_info to renesas_clk_endisable()   Marek Vasut
• [PATCH 10/30] clk: renesas: Introduce enum clk_reg_layout   Marek Vasut
• [PATCH 11/30] clk: renesas: Add register pointers into struct cpg_mssr_info   Marek Vasut
• [PATCH 12/30] clk: renesas: Deduplicate gen3_clk_get_rate64() PLL handling   Marek Vasut
• [PATCH 13/30] clk: renesas: Handle R8A779A0 V3U clock types in Gen3 clock code   Marek Vasut
• [PATCH 14/30] clk: renesas: Add R8A779A0 clock tables   Marek Vasut
• [PATCH 15/30] gpio: renesas: Pass struct udevice to rcar_gpio_set_direction()   Marek Vasut
• [PATCH 16/30] gpio: renesas: Handle R8A779A0 V3U INEN register   Marek Vasut
• [PATCH 17/30] pinctrl: renesas: Synchronize R-Car Gen2/Gen3 tables with Linux 5.12   Marek Vasut
• [PATCH 18/30] pinctrl: renesas: Deduplicate Kconfig   Marek Vasut
• [PATCH 19/30] pinctrl: renesas: Fix R-Car Gen2 help text   Marek Vasut
• [PATCH 20/30] pinctrl: renesas: Implement unlock register masks   Marek Vasut
• [PATCH 21/30] pinctrl: renesas: Import R8A779A0 V3U PFC tables   Marek Vasut
• [PATCH 22/30] ARM: dts: renesas: Add R8A779A0 V3U DTs and headers   Marek Vasut
• [PATCH 23/30] ARM: dts: renesas: Add R8A779A0 V3U Falcon DTs   Marek Vasut
• [PATCH 24/30] ARM: dts: renesas: Add R8A779A0 V3U DT extras   Marek Vasut
• [PATCH 25/30] ARM: dts: renesas: Add RPC node to R8A779A0 V3U   Marek Vasut
• [PATCH 26/30] ARM: renesas: Add R8A779A0 V3U platform code   Marek Vasut
• [PATCH 27/30] ARM: renesas: Add R8A779A0 V3U Falcon board code   Marek Vasut
• [PATCH 28/30] ARM: renesas: Add generic timer initialization for V3U Falcon   Marek Vasut
• [PATCH 29/30] ARM: renesas: Add GICv3 initialization for V3U Falcon   Marek Vasut
• [PATCH 30/30] ARM: rmobile: Add basic PSCI support for R8A779A0 V3U Falcon   Marek Vasut
• [PULL] u-boot-usb/master   Marek Vasut
• [PATCH] ARM: stm32: Add additional ID register check for KSZ8851 presence   Marek Vasut
• [PATCH] ARM: stm32: Enable UNZIP on DHSOM by default   Marek Vasut
• [PATCH] Makefile: Fix generation of flash.bin u-boot.itb with binman   Marek Vasut
• [PATCH] powerpc, wdt: disable ratelimiting when disabling interrupts   Rasmus Villemoes
• [PATCH] powerpc, wdt: disable ratelimiting when disabling interrupts   Rasmus Villemoes
• [PATCH] watchdog: use time_after_eq() in watchdog_reset()   Rasmus Villemoes
• [PATCH v2 0/2] powerpc: introduce CONFIG_CACHE_FLUSH_WATCHDOG_THRESHOLD   Rasmus Villemoes
• [PATCH v2 1/2] powerpc: lib: remove leftover CONFIG_5xx   Rasmus Villemoes
• [PATCH v2 2/2] powerpc: introduce CONFIG_CACHE_FLUSH_WATCHDOG_THRESHOLD   Rasmus Villemoes
• [PATCH 0/2] allow environment to be updated from dtb   Rasmus Villemoes
• [PATCH 1/2] env: allow environment to be amended from control dtb   Rasmus Villemoes
• [PATCH 2/2] sandbox: add test of CONFIG_ENV_IMPORT_FDT   Rasmus Villemoes
• [PATCH v4 0/2] allow opting out of WATCHDOG_RESET() from timer interrupt   Rasmus Villemoes
• [PATCH v4 1/2] timer: mpc83xx_timer: fix build with CONFIG_{HW_, }WATCHDOG   Rasmus Villemoes
• [PATCH v4 2/2] allow opting out of WATCHDOG_RESET() from timer interrupt   Rasmus Villemoes
• [PATCH resend 0/2] add CONFIG_ENV_SECT_SIZE_AUTO   Rasmus Villemoes
• [PATCH resend 1/2] env/sf.c: use a variable to hold the sector size   Rasmus Villemoes
• [PATCH resend 2/2] env: add CONFIG_ENV_SECT_SIZE_AUTO   Rasmus Villemoes
• [PATCH v2 2/2] powerpc: introduce CONFIG_CACHE_FLUSH_WATCHDOG_THRESHOLD   Rasmus Villemoes
• [PATCH] watchdog: use time_after_eq() in watchdog_reset()   Rasmus Villemoes
• [PATCH] watchdog: use time_after_eq() in watchdog_reset()   Rasmus Villemoes
• [PATCH v2] Makefile: fix generating environment file   Rasmus Villemoes
• [PATCH v2] Makefile: fix generating environment file   Rasmus Villemoes
• [PATCH 1/2] env: allow environment to be amended from control dtb   Rasmus Villemoes
• [PATCH 1/2] env: allow environment to be amended from control dtb   Rasmus Villemoes
• [PATCH v2 0/2] allow environment to be updated from dtb   Rasmus Villemoes
• [PATCH v2 1/2] env: allow environment to be amended from control dtb   Rasmus Villemoes
• [PATCH v2 2/2] sandbox: add test of CONFIG_ENV_IMPORT_FDT   Rasmus Villemoes
• [PATCH v3 0/2] powerpc: introduce CONFIG_CACHE_FLUSH_WATCHDOG_THRESHOLD   Rasmus Villemoes
• [PATCH v3 1/2] powerpc: lib: remove leftover CONFIG_5xx   Rasmus Villemoes
• [PATCH v3 2/2] powerpc: introduce CONFIG_CACHE_FLUSH_WATCHDOG_THRESHOLD   Rasmus Villemoes
• [PATCH v2] Makefile: fix generating environment file   Rasmus Villemoes
• [PATCH] Makefile: fix generation of defaultenv.h from empty initial file   Rasmus Villemoes
• [PATCH v4 0/2] allow opting out of WATCHDOG_RESET() from timer interrupt   Rasmus Villemoes
• [PATCH 1/2] arm: dts: bcm283x: Add minimal smbios information   Fabian Vogt
• [PATCH 2/2] configs: rpi: Enable SMBIOS sysinfo driver   Fabian Vogt
• [PATCH] dm: core: Add address translation in fdt_get_resource   Horatiu Vultur
• [PATCH 0/2] net: jr2: Fix for jr2 switch   Horatiu Vultur
• [PATCH v3 00/12] Add support for pinmux status command on beaglebone   Lokesh Vutla
• [PATCH V2 0/3] arm: omap3: Make functions static when possible   Lokesh Vutla
• [PATCH v4 00/12] Add support for pinmux status command on beaglebone   Lokesh Vutla
• [GIT PULL] TI changes for v2021.07 rc1   Lokesh Vutla
• [PATCH v2] arm: dts: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems   Lokesh Vutla
• [PATCH] board: sl28: fix RGMII clock and voltage   Michael Walle
• [PATCH] net: use a more deterministic approach to get the active ethernet device   Michael Walle
• [PATCH] net: use the same alias stem for ethernet as linux   Michael Walle
• [PATCH v4 4/7] drivers: ram: sifive: rename fu540_ddr and add fu740 support   Green Wan
• [RFC PATCH v4 2/2] board: sifive: unmatched: clear feature disable CSR   Green Wan
• [PATCH v4 0/7] Add FU740 chip and HiFive Unmatched board support   Green Wan
• [PATCH v5 0/8] Add FU740 chip and HiFive Unmatched board support   Green Wan
• [PATCH v5 1/8] riscv: dts: add fu740 support   Green Wan
• [PATCH v5 2/8] riscv: cpu: fu740: Add support for cpu fu740   Green Wan
• [PATCH v5 3/8] drivers: clk: add fu740 support   Green Wan
• [PATCH v5 4/8] drivers: ram: sifive: rename fu540_ddr and add fu740 support   Green Wan
• [PATCH v5 5/8] drivers: pci: add pcie support for fu740   Green Wan
• [PATCH v5 6/8] board: sifive: add HiFive Unmatched board support   Green Wan
• [PATCH v5 7/8] drivers: net: macb: add fu740 support   Green Wan
• [PATCH v5 8/8] arch: riscv: dts: Set speed of FU740 to 1.2GHz   Green Wan
• [PATCH v5 8/8] arch: riscv: dts: Set speed of FU740 to 1.2GHz   Green Wan
• [PATCH v6 0/7] Add FU740 chip and HiFive Unmatched board support   Green Wan
• [PATCH v6 1/7] riscv: dts: add fu740 support   Green Wan
• [PATCH v6 2/7] riscv: cpu: fu740: Add support for cpu fu740   Green Wan
• [PATCH v6 3/7] drivers: clk: add fu740 support   Green Wan
• [PATCH v6 4/7] drivers: ram: sifive: rename fu540_ddr and add fu740 support   Green Wan
• [PATCH v6 5/7] drivers: pci: add pcie support for fu740   Green Wan
• [PATCH v6 6/7] board: sifive: add HiFive Unmatched board support   Green Wan
• [PATCH v6 7/7] drivers: net: macb: add fu740 support   Green Wan
• [RFC PATCH v4 1/2] arch: riscv: cpu: Add callback to init each core   Green Wan
• [RFC PATCH v4 1/2] arch: riscv: cpu: Add callback to init each core   Green Wan
• [RFC PATCH v4 1/2] arch: riscv: cpu: Add callback to init each core   Green Wan
• [RFC PATCH v4 1/2] arch: riscv: cpu: Add callback to init each core   Green Wan
• [RFC PATCH v4 1/2] arch: riscv: cpu: Add callback to init each core   Green Wan
• [RFC PATCH v5 0/2] arch: riscv: cpu: Add callback to init each core   Green Wan
• [RFC PATCH v5 1/2] arch: riscv: cpu: Add callback to init each core   Green Wan
• [RFC PATCH v5 2/2] board: sifive: unmatched: clear feature disable CSR   Green Wan
• [RFC PATCH v5 1/2] arch: riscv: cpu: Add callback to init each core   Green Wan
• [RFC PATCH v5 2/2] board: sifive: unmatched: clear feature disable CSR   Green Wan
• [RFC PATCH v6 0/2] arch: riscv: cpu: Add callback to init each core   Green Wan
• [RFC PATCH v6 1/2] arch: riscv: cpu: Add callback to init each core   Green Wan
• [RFC PATCH v6 2/2] arch: riscv: cpu: fu740: clear feature disable CSR   Green Wan
• [PATCH v6 1/7] riscv: dts: add fu740 support   Green Wan
• [PATCH v6 5/7] drivers: pci: add pcie support for fu740   Green Wan
• [PATCH v6 1/7] riscv: dts: add fu740 support   Green Wan
• [PATCH v7 0/8] Add FU740 chip and HiFive Unmatched board support   Green Wan
• [PATCH v7 1/8] riscv: cpu: fu740: Add support for cpu fu740   Green Wan
• [PATCH v7 2/8] drivers: clk: add fu740 support   Green Wan
• [PATCH v7 3/8] drivers: ram: sifive: rename fu540_ddr and add fu740 support   Green Wan
• [PATCH v7 4/8] drivers: pci: add pcie support for fu740   Green Wan
• [PATCH v7 5/8] riscv: dts: add fu740 support   Green Wan
• [PATCH v7 6/8] riscv: dts: add SiFive Unmatched board support   Green Wan
• [PATCH v7 7/8] board: sifive: add HiFive Unmatched board support   Green Wan
• [PATCH v7 8/8] drivers: net: macb: add fu740 support   Green Wan
• [RFC PATCH v7 0/2] riscv: cpu: Add callback to init each core   Green Wan
• [RFC PATCH v7 1/2] riscv: cpu: Add callback to init each core   Green Wan
• [RFC PATCH v7 2/2] riscv: cpu: fu740: clear feature disable CSR   Green Wan
• [PATCH v7 0/8] Add FU740 chip and HiFive Unmatched board support   Green Wan
• [PATCH] phy: rockchip: inno-usb2: fix hang when multiple controllers exit   Frank Wang
• [PATCH] phy: rockchip: inno-usb2: fix hang when multiple controllers exit   Frank Wang
• [PATCH 1/1] patch for OpenPiton SoC of RISC-V Architecture   Tianrui Wei
• [PATCH 1/2] riscv: board: Support Openpiton Soc   Tianrui Wei
• [PATCH 2/2] drivers: mmc: add OpenPiton MMC support   Tianrui Wei
• [PATCH 1/2] riscv: board: Support Openpiton Soc   Tianrui Wei
• [PATCH 2/2] drivers: mmc: add OpenPiton MMC support   Tianrui Wei
• [PATCH 2/2] drivers: mmc: add OpenPiton MMC support   Tianrui Wei
• [PATCH V2 0/2] Add OpenPiton board support   Tianrui Wei
• [PATCH V2 1/2] mmc: add OpenPiton mmc support   Tianrui Wei
• [PATCH V2 0/2] Add OpenPiton board support   Tianrui Wei
• [PATCH V2 1/2] mmc: add OpenPiton mmc support   Tianrui Wei
• [PATCH V3 0/2] Add OpenPiton board support   Tianrui Wei
• [PATCH V3 1/2] mmc: add OpenPiton mmc support   Tianrui Wei
• [PATCH V3 2/2] riscv: board: Support OpenPiton SoC   Tianrui Wei
• [PATCH UBoot] fs: btrfs: fix the false alert of decompression failure   Qu Wenruo
• [PATCH U-boot v2] fs: btrfs: fix the false alert of decompression failure   Qu Wenruo
• [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages   Julius Werner
• [PATCH 3/3] pci: pcie_dw_rockchip: Use udelay instead of msleep   Patrick Wildt
• [PATCH 1/3] pci: pcie_dw_rockchip: Fixed the below compilation error   Patrick Wildt
• [PATCH 2/3] usb: ehci-mx6: add IMX8MM OTG support   Patrick Wildt
• [PATCH 3/3] pci: pcie_dw_rockchip: Use udelay instead of msleep   Patrick Wildt
• [ANN] U-Boot v2021.04 released   Trevor Woerner
• [ANN] U-Boot v2021.04 released   Trevor Woerner
• [PATCH 1/2] moveconfig.py: add try…except   Trevor Woerner
• [PATCH v2] ARM: dts: at91: sama5d3: add u-boot properties to sama5d3 pit timer   Derald Woods
• [PATCH v2] ARM: dts: at91: sama5d3: add u-boot properties to sama5d3 pit timer   Derald Woods
• [PATCH] riscv: booti: do not force relocation if force_reloc is not set   Vitaly Wool
• [PATCH v2] cmd: net: Add the "arp" command   Joe Xue
• [PATCH v3] cmd: net: Add the "arp" command   Joe Xue
• [PATCH v4] cmd: net: Add the "arp" command   Joe Xue
• [PATCH v8 00/28] mtd: spi-nor-core: add xSPI Octal DTR support   Pratyush Yadav
• [PATCH v8 01/28] spi: spi-mem: allow specifying whether an op is DTR or not   Pratyush Yadav
• [PATCH v8 02/28] spi: spi-mem: allow specifying a command's extension   Pratyush Yadav
• [PATCH v8 03/28] spi: spi-mem: export spi_mem_default_supports_op()   Pratyush Yadav
• [PATCH v8 04/28] spi: spi-mem: add spi_mem_dtr_supports_op()   Pratyush Yadav
• [PATCH v8 05/28] spi: cadence-qspi: Do not calibrate when device tree sets read delay   Pratyush Yadav
• [PATCH v8 06/28] spi: cadence-qspi: Add a small delay before indirect writes   Pratyush Yadav
• [PATCH v8 07/28] spi: cadence-qspi: Add support for octal DTR flashes   Pratyush Yadav
• [PATCH v8 08/28] arm: mvebu: x530: Use tiny SPI NOR   Pratyush Yadav
• [PATCH v8 09/28] mtd: spi-nor-core: Fix address width on flash chips > 16MB   Pratyush Yadav
• [PATCH v8 10/28] mtd: spi-nor-core: Add a ->setup() hook   Pratyush Yadav
• [PATCH v8 11/28] mtd: spi-nor-core: Move SFDP related declarations to top   Pratyush Yadav
• [PATCH v8 12/28] mtd: spi-nor-core: Introduce flash-specific fixup hooks   Pratyush Yadav
• [PATCH v8 13/28] mtd: spi-nor-core: Rework hwcaps selection   Pratyush Yadav
• [PATCH v8 14/28] mtd: spi-nor-core: Do not set data direction when there is no data   Pratyush Yadav
• [PATCH v8 15/28] mtd: spi-nor-core: Add support for DTR protocol   Pratyush Yadav
• [PATCH v8 16/28] mtd: spi-nor-core: prepare BFPT parsing for JESD216 rev D   Pratyush Yadav
• [PATCH v8 17/28] mtd: spi-nor-core: Get command opcode extension type from BFPT   Pratyush Yadav
• [PATCH v8 18/28] mtd: spi-nor-core: Parse xSPI Profile 1.0 table   Pratyush Yadav
• [PATCH v8 19/28] mtd: spi-nor-core: Prepare Read SR and FSR for Octal DTR mode   Pratyush Yadav
• [PATCH v8 20/28] mtd: spi-nor-core: Enable octal DTR mode when possible   Pratyush Yadav
• [PATCH v8 21/28] mtd: spi-nor-core: Do not make invalid quad enable fatal   Pratyush Yadav
• [PATCH v8 22/28] mtd: spi-nor-core: Detect Soft Reset sequence support from BFPT   Pratyush Yadav
• [PATCH v8 23/28] mtd: spi-nor-core: Perform a Soft Reset on shutdown   Pratyush Yadav
• [PATCH v8 24/28] mtd: spi-nor-core: Perform a Soft Reset on boot   Pratyush Yadav
• [PATCH v8 25/28] mtd: spi-nor-core: allow truncated erases   Pratyush Yadav
• [PATCH v8 26/28] mtd: spi-nor-core: Add non-uniform erase for Spansion/Cypress   Pratyush Yadav
• [PATCH v8 27/28] mtd: spi-nor-core: Add support for Cypress Semper flash   Pratyush Yadav
• [PATCH v8 28/28] mtd: spi-nor-core: Allow using Micron mt35xu512aba in Octal DTR mode   Pratyush Yadav
• [PATCH v8 04/28] spi: spi-mem: add spi_mem_dtr_supports_op()   Pratyush Yadav
• [PATCH v8 00/28] mtd: spi-nor-core: add xSPI Octal DTR support   Pratyush Yadav
• [PATCH v8 02/28] spi: spi-mem: allow specifying a command's extension   Pratyush Yadav
• [PATCH v8 01/28] spi: spi-mem: allow specifying whether an op is DTR or not   Pratyush Yadav
• [PATCH v8 01/28] spi: spi-mem: allow specifying whether an op is DTR or not   Pratyush Yadav
• [PATCH 2/4] sf: Tidy up code to avoid #ifdef   Pratyush Yadav
• [PATCH v8 26/28] mtd: spi-nor-core: Add non-uniform erase for Spansion/Cypress   Pratyush Yadav
• [PATCH 2/4] sf: Tidy up code to avoid #ifdef   Pratyush Yadav
• [PATCH v2 05/13] mtd: spi-nor-ids: add support for Macronix mx25u51245g and mx66u1g45g flash   Pratyush Yadav
• [PATCH v2 05/13] mtd: spi-nor-ids: add support for Macronix mx25u51245g and mx66u1g45g flash   Pratyush Yadav
• [PATCH] pinctrl: single: fix a never true comparison   Pratyush Yadav
• [PATCH v2] pinctrl: single: fix a never true comparison   Pratyush Yadav
• [PATCH v6 00/14] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   Pratyush Yadav
• [PATCH v6 00/14] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   Pratyush Yadav
• Pull request: rockchip-for-v2021.07   Kever Yang
• Re: [PATCH 6/8] ARM: geekbox: Enable the rk3368 network driver【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• [PATCH 7/8] ARM: sheep-rk3368: Enable the rk3368 network driver   Kever Yang
• [PATCH 5/8] ARM: Rock: Disable network support   Kever Yang
• [PATCH 2/3] ARM: mediatek: Add MT8175 support   Chunfeng Yun
• USB 3.1 (3.2) support in U-Boot?   Chunfeng Yun
• [PATCH] Fix IDE commands issued, fix endian issues, fix non MMIO   Reinoud Zandijk
• [PATCH] Fix IDE commands issued, fix endian issues, fix non MMIO   Reinoud Zandijk
• [PATCH] phy: rockchip: inno-usb2: fix hang when multiple controllers exit   Icenowy Zheng
• [PATCH] phy: rockchip: inno-usb2: fix hang when multiple controllers exit   Icenowy Zheng
• [PATCH] phy: rockchip: inno-usb2: fix hang when multiple controllers exit   Icenowy Zheng
• [PATCH 19/19] ARM: imx8m: verdin-imx8mm: Enable USB Host support   Marcel Ziswiler
• Qemu U-boot Standalone Application Crash   prashant basva
• [PATCH] dm: core: Add size operations on device tree references   chenguanqiao
• [PATCH v2 0/2] dm: core: Add size operations on device tree references   chenguanqiao
• [PATCH v2 1/2] dm: core: Add size operations on device tree references   chenguanqiao
• [PATCH v2 2/2] test: dm: add test item for ofnode_get_addr() and ofnode_get_size()   chenguanqiao
• [PATCH v3 0/2] dm: core: Add size operations on device tree references   chenguanqiao
• [PATCH v3 1/2] dm: core: Add size operations on device tree references   chenguanqiao
• [PATCH v3 2/2] test: dm: add test item for ofnode_get_addr() and ofnode_get_size()   chenguanqiao
• [PATCH 4/4] board: toradex: apalis-imx8x: fix build instructions   sbabic at denx.de
• [PATCH 4/5] ARM: board: warp: convert to DM_USB   sbabic at denx.de
• [PATCH 2/2] board: gateworks: venice: increase CONFIG_SYS_SPL_MALLOC_SIZE   sbabic at denx.de
• [PATCH 1/2] arm: dts: imx8mn, imx8mn-beacon: Sync dts files with Kernel 5.12-rc5   sbabic at denx.de
• [PATCH 07/11] imx: ventana: add pinctrl and remove unneeded UART init and config   sbabic at denx.de
• [PATCH 04/11] imx: ventana: add Gateworks Ventana dts   sbabic at denx.de
• [PATCH 5/5] ARM: imx: udoo: convert to DM_ETH   sbabic at denx.de
• [PATCH 06/11] imx: ventana: convert U-Boot to OF_CONTROL using FIT image   sbabic at denx.de
• [PATCH 11/11] imx: ventana: enable dm for SPI   sbabic at denx.de
• [PATCH 05/11] arm: dts: imx6qdl-gw*: add dr_mode prop to dt to avoid error   sbabic at denx.de
• [PATCH 3/5] ARM: imx: udoo: drop MTD config   sbabic at denx.de
• [PATCH 01/11] spl: fit: nand: skip bad block handling if NAND chip not fully defined   sbabic at denx.de
• [PATCH 4/8] ARM: riotboard: Enable OF_CONTROL and DM gpio/pin control   sbabic at denx.de
• [PATCH 03/11] dt-bindings: add tda1997x and bindings   sbabic at denx.de
• [PATCH 3/5] ARM: board: warp: convert to DM_MMC   sbabic at denx.de
• [PATCH 3/3] board: st: stm32f746-disco: fix console is not enabled while init dram   sbabic at denx.de
• [PATCH] ARM: imx: imx8mn-ddr4-evk: Add ethernet support   sbabic at denx.de
• [PATCH 5/8] ARM: embestmx6boards: convert the mars/riot boards to DM_MMC   sbabic at denx.de
• [PATCH] ARM: imx: Add OCRAM_S into iMX8M MMU tables   sbabic at denx.de
• [PATCH 09/11] imx: ventana: enable dm support for MMC and SATA   sbabic at denx.de
• [PATCH 3/4] apalis/colibri_imx6: remove video= settings   sbabic at denx.de
• [PATCH 02/11] spl: fit: nand: allow for non-page-aligned elements   sbabic at denx.de
• [PATCH 3/8] ARM: embestmx6boards: merge the riotboard's configs together   sbabic at denx.de
• [PATCH 8/8] ARM: embestmx6boards: convert the mars/riot boards to DM SPI   sbabic at denx.de
• [PATCH 4/5] ARM: imx: udoo: Convert block devices to DM   sbabic at denx.de
• [PATCH 6/8] ARM: embestmx6boards: convert mars/riot boards to DM_USB   sbabic at denx.de
• [PATCH 1/3] board: freescale: imxrt1020-evk: fix console is not enabled while init dram   sbabic at denx.de
• [PATCH 1/2] board: gateworks: venice: fix gsc_get_dev   sbabic at denx.de
• [PATCH 1/8] ARM: embestmx6boards: Import the marsboard/riotboard. dts files   sbabic at denx.de
• [PATCH 7/8] ARM: embestmx6boards: convert mars/riot boards to DM_ETH   sbabic at denx.de
• [PATCH 2/2] ARM: board: usbarmory: Convert to OF_CONTROL and DM   sbabic at denx.de
• [PATCH] MAINTAINERS: Use my personal e-mail address   sbabic at denx.de
• [PATCH 2/4] colibri_imx6ull/imx7: add missing tdxargs variable   sbabic at denx.de
• [PATCH 1/2] ARM: board: usbarmory: Import the usbarmory dts file   sbabic at denx.de
• [PATCH 2/5] ARM: board: warp: Enable OF_CONTROL and DM gpio/pin control   sbabic at denx.de
• [PATCH 10/11] imx: ventana: enable dm for MTD and NAND   sbabic at denx.de
• [PATCH 2/3] board: freescale: imxrt1050-evk: fix console is not enabled while init dram   sbabic at denx.de
• [PATCH 1/5] ARM: board: warp: Import dts files   sbabic at denx.de
• [PATCH 2/2] configs: imx8mn_beacon: Enable QSPI Support   sbabic at denx.de
• [PATCH 1/4] ARM: board: udoo_neo: Import UDOO Neo dts files   sbabic at denx.de
• [PATCH 2/5] ARM: imx: udoo: Enable OF_CONTROL and DM gpio/pin control   sbabic at denx.de
• [PATCH 5/5] ARM: board: warp7: Minor cleanups and DM_ETH   sbabic at denx.de
• [PATCH 1/4] colibri_imx6: adjust boot order   sbabic at denx.de
• [PATCH 2/8] ARM: marsboard: Enable OF_CONTROL and DM gpio/pin control   sbabic at denx.de
• [PATCH 08/11] imx: ventana: enable dm support for USB   sbabic at denx.de
• [PATCH 1/5] ARM: board: udoo: Import UDOO dts files   sbabic at denx.de
• [PATCH 1/2] mmc: fsl_esdhc_imx: remove redundant cmd11 related code.   sbabic at denx.de
• [PATCH] ARM: pcm058: Match mainline Linux NAND ECC layout/behaviour   sbabic at denx.de
• [PATCH 2/2] mmc: fsl_esdhc_imx: add extra delay for IO voltage switch if necessary   sbabic at denx.de
• [PATCH v2 1/2] mx23_olinuxino: enable device tree   sbabic at denx.de
• [PATCH 1/2] mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output   sbabic at denx.de
• [PATCH v1] imx: bootaux fix elf loading   sbabic at denx.de
• [PATCH v2 2/2] mx23_olinuxino: convert MMC to driver model   sbabic at denx.de
• [PATCH] pico-imx6ul: Pass the PMIC I2C address in pmic_get()   sbabic at denx.de
• [PATCH] doc: imx: psb: Document usage of SRC_GPR10 PERSIST_SECONDARY_BOOT for A/B switching   sbabic at denx.de
• [PATCH 1/1] imx6: icorem6: chmod 644 enigcam.bmp   sbabic at denx.de
• [PATCH] imx: imx6ull: fix pinmux sel_input value for uart5 pins   sbabic at denx.de
• Weird issue when trying to access to uboot environment from Linux   gianluca
• [PATCH v4 0/7] Add rt-thread art-pi board support   dillon.minfei at gmail.com
• [PATCH v4 1/7] ARM: dts: stm32: split sdram pin & timing parameter into specific board dts   dillon.minfei at gmail.com
• [PATCH v4 2/7] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750   dillon.minfei at gmail.com
• [PATCH v4 3/7] ARM: dts: stm32: add new instances for stm32h743 MCU   dillon.minfei at gmail.com
• [PATCH v4 4/7] ARM: dts: stm32: fix i2c node typo in stm32h743, update dmamux1 register   dillon.minfei at gmail.com
• [PATCH v4 5/7] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6   dillon.minfei at gmail.com
• [PATCH v4 6/7] ram: stm32: fix strsep failed on read only memory   dillon.minfei at gmail.com
• [PATCH v4 7/7] board: Add rt-thread art-pi board support   dillon.minfei at gmail.com
• [PATCH v5 0/7] Add rt-thread art-pi board support   dillon.minfei at gmail.com
• [PATCH v5 1/7] ARM: dts: stm32: split sdram pin & timing parameter into specific board dts   dillon.minfei at gmail.com
• [PATCH v5 2/7] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750   dillon.minfei at gmail.com
• [PATCH v5 3/7] ARM: dts: stm32: add new instances for stm32h743 MCU   dillon.minfei at gmail.com
• [PATCH v5 4/7] ARM: dts: stm32: fix i2c node typo in stm32h743, update dmamux1 register   dillon.minfei at gmail.com
• [PATCH v5 5/7] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6   dillon.minfei at gmail.com
• [PATCH v5 6/7] ram: stm32: fix strsep failed on read only memory   dillon.minfei at gmail.com
• [PATCH v5 7/7] board: Add rt-thread art-pi board support   dillon.minfei at gmail.com
• [PATCH v6 00/14] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH v6 01/14] mtd: spi-nor-core: Add a ->setup() hook   tkuw584924 at gmail.com
• [PATCH v6 02/14] mtd: spi-nor-core: Move SFDP related declarations to top   tkuw584924 at gmail.com
• [PATCH v6 03/14] mtd: spi-nor-core: Introduce flash-specific fixup hooks   tkuw584924 at gmail.com
• [PATCH v6 04/14] mtd: spi-nor-core: allow truncated erases   tkuw584924 at gmail.com
• [PATCH v6 05/14] mtd: spi-nor-core: Add non-uniform erase for Spansion/Cypress   tkuw584924 at gmail.com
• [PATCH v6 06/14] mtd: spi-nor: Add Cypress manufacturer ID   tkuw584924 at gmail.com
• [PATCH v6 07/14] mtd: spi-nor-ids: Add Cypress s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH v6 08/14] mtd: spi-nor-core: Add support for Read/Write Any Register   tkuw584924 at gmail.com
• [PATCH v6 09/14] mtd: spi-nor-core: Add support for volatile QE bit   tkuw584924 at gmail.com
• [PATCH v6 10/14] mtd: spi-nor-core: Add the ->ready() hook   tkuw584924 at gmail.com
• [PATCH v6 11/14] mtd: spi-nor-core: Read status by Read Any Register   tkuw584924 at gmail.com
• [PATCH v6 12/14] mtd: spi-nor-core: Add Cypress manufacturer ID in set_4byte   tkuw584924 at gmail.com
• [PATCH v6 13/14] mtd: spi-nor-core: Add fixups for Cypress s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH v6 14/14] mtd: spi-nor-tiny: Add fixups for Cypress s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH v7 00/14] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH v7 01/14] mtd: spi-nor-core: Add a ->setup() hook   tkuw584924 at gmail.com
• [PATCH v7 02/14] mtd: spi-nor-core: Move SFDP related declarations to top   tkuw584924 at gmail.com
• [PATCH v7 03/14] mtd: spi-nor-core: Introduce flash-specific fixup hooks   tkuw584924 at gmail.com
• [PATCH v7 04/14] mtd: spi-nor-core: allow truncated erases   tkuw584924 at gmail.com
• [PATCH v7 05/14] mtd: spi-nor-core: Add non-uniform erase for Spansion/Cypress   tkuw584924 at gmail.com
• [PATCH v7 06/14] mtd: spi-nor: Add Cypress manufacturer ID   tkuw584924 at gmail.com
• [PATCH v7 07/14] mtd: spi-nor-ids: Add Cypress s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH v7 08/14] mtd: spi-nor-core: Add support for Read/Write Any Register   tkuw584924 at gmail.com
• [PATCH v7 09/14] mtd: spi-nor-core: Add support for volatile QE bit   tkuw584924 at gmail.com
• [PATCH v7 10/14] mtd: spi-nor-core: Add the ->ready() hook   tkuw584924 at gmail.com
• [PATCH v7 11/14] mtd: spi-nor-core: Read status by Read Any Register   tkuw584924 at gmail.com
• [PATCH v7 12/14] mtd: spi-nor-core: Add Cypress manufacturer ID in set_4byte   tkuw584924 at gmail.com
• [PATCH v7 13/14] mtd: spi-nor-core: Add fixups for Cypress s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH v7 14/14] mtd: spi-nor-tiny: Add fixups for Cypress s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH] cmd: net: Add the "arp" command   lgxue at hotmail.com
• [PATCH v2] cmd: net: Add the "arp" command   lgxue at hotmail.com
• [PATCH v3] cmd: net: Add the "arp" command   lgxue at hotmail.com
• [PATCH v3] cmd: net: Add the "arp" command   lgxue at hotmail.com
• [PATCH v4] cmd: net: Add the "arp" command   lgxue at hotmail.com
• [PATCH v2 00/18] am335x, guardian: update board specific changes   Gireesh.Hiremath at in.bosch.com
• [PATCH v2 01/18] am335x, guardian: configs: Enable clock driver   Gireesh.Hiremath at in.bosch.com
• [PATCH v2 02/18] am335x, guardian: mem: Add board dependent mem values   Gireesh.Hiremath at in.bosch.com
• [PATCH v2 03/18] am335x, guardian: configs: add ubi fastmap support   Gireesh.Hiremath at in.bosch.com
• [PATCH v2 04/18] am335x, guardian: set tftp_load_addr in environment   Gireesh.Hiremath at in.bosch.com
• [PATCH v2 05/18] am335x, guardian: configs: cmd: add memtest configs   Gireesh.Hiremath at in.bosch.com
• [PATCH v2 06/18] am335x, guardian: add memtest address range   Gireesh.Hiremath at in.bosch.com
• [PATCH v2 07/18] am335x, guardian: Update pinmux configuration   Gireesh.Hiremath at in.bosch.com
• [PATCH v2 08/18] am335x, guardian: set environment variable autoload to no   Gireesh.Hiremath at in.bosch.com
• [PATCH v2 09/18] am335x, guardian: code cleanup and boot optimization   Gireesh.Hiremath at in.bosch.com
• [PATCH v2 10/18] am335x, guardian: configs: set boot delay   Gireesh.Hiremath at in.bosch.com
• [PATCH v2 11/18] am335x, guardian: configs: cmd : disable spl command   Gireesh.Hiremath at in.bosch.com
• [PATCH v2 12/18] am335x, guardian: update swi logic   Gireesh.Hiremath at in.bosch.com
• [PATCH v2 13/18] am335x, guardian: Enable backlight   Gireesh.Hiremath at in.bosch.com
• [PATCH v2 14/18] am335x, guardian: configs: Enable display config   Gireesh.Hiremath at in.bosch.com
• [PATCH v2 15/18] drivers: video: hx8238 fix build bug   Gireesh.Hiremath at in.bosch.com
• [PATCH v2 16/18] am335x, guardian: Enable panel driver Himax HX8238D   Gireesh.Hiremath at in.bosch.com
• [PATCH v2 17/18] am335x, guardian: software update available status is stored in AM3352 RTC scracth register   Gireesh.Hiremath at in.bosch.com
• [PATCH v2 18/18] am335x, guardian: configs: Enable bootcount nvmem support   Gireesh.Hiremath at in.bosch.com
• [PATCH] env: Load env when ENV_IS_NOWHERE is only location selected   Felix.Vietmeyer at jila.colorado.edu
• [PATCH v2] smbios: Fix table when no string is present   matthias.bgg at kernel.org
• [PATCH 1/2] arm: dts: bcm283x: Add minimal smbios information   matthias.bgg at kernel.org
• [PATCH 2/2] configs: rpi: Enable SMBIOS sysinfo driver   matthias.bgg at kernel.org
• [PATCH v2 1/2] arm: dts: bcm283x: Add minimal smbios information   matthias.bgg at kernel.org
• [PATCH v2 2/2] configs: rpi: Enable SMBIOS sysinfo driver   matthias.bgg at kernel.org
• SAMA5D3 Xplained: SPL broken after panic added to /lib/time.c:94   Eugen.Hristev at microchip.com
• SAMA5D3 Xplained: SPL broken after panic added to /lib/time.c:94   Eugen.Hristev at microchip.com
• SAMA5D3 Xplained: SPL broken after panic added to /lib/time.c:94   Eugen.Hristev at microchip.com
• [PATCH] add u-boot properties to sama5d3 pit timer   Eugen.Hristev at microchip.com
• [PATCH v2] ARM: dts: at91: sama5d3: add u-boot properties to sama5d3 pit timer   Eugen.Hristev at microchip.com
• [PATCH v2] ARM: dts: at91: sama5d3: add u-boot properties to sama5d3 pit timer   Eugen.Hristev at microchip.com
• [PATCH v2] ARM: dts: at91: sama5d3: add u-boot properties to sama5d3 pit timer   Eugen.Hristev at microchip.com
• [PATCH 1/2] gpio: atmel_pio4: add support for sama7g5 pio4 version with 5 banks   Eugen.Hristev at microchip.com
• [PULL] u-boot-atmel-2021.07-b   Eugen.Hristev at microchip.com
• [PATCH v2] board:pm9261 - Enable DM_ETH   Eugen.Hristev at microchip.com
• [PATCH] board:pm9263 - Enable DM_ETH   Eugen.Hristev at microchip.com
• [PATCH v2] board:pm9261 - Enable DM_ETH   Eugen.Hristev at microchip.com
• [PATCH v4 0/7] Add rt-thread art-pi board support   dillon min
• [PATCH v4 7/7] board: Add rt-thread art-pi board support   dillon min
• [PATCH 2/2] board: Add Zynq Mxic picozed development board support   zhengxunli at mxic.com.tw
• [PATCH 1/2] clk: zynq: Add clock wizard driver   zhengxunli at mxic.com.tw
• sunxi_nand_spl reading zeros on NextThing C.H.I.P.   r315
• [PATCH] toradex: configblock: fix module revision in config block   denys.drozdov at toradex.com
• [PATCH 1/2] driver: watchdog: reset watchdog in designware_wdt_stop() function   Meng.Li at windriver.com
• [PATCH 2/2] driver: watchdog: enable wdt command by default   Meng.Li at windriver.com
• [PATCH v2, 1/2] driver: watchdog: reset watchdog in designware_wdt_stop() function   Meng.Li at windriver.com
• [PATCH v2,2/2] driver: watchdog: enable wdt command by default   Meng.Li at windriver.com
• [PATCH v3, 1/2] driver: watchdog: reset watchdog in designware_wdt_stop() function   Meng.Li at windriver.com
• [PATCH v3,2/2] driver: watchdog: enable wdt command by default   Meng.Li at windriver.com
• [PATCH] Revert "spl: Drop bd_info in the data section"   xiaobo
• [PATCH 0/2] Add Xilinx clock wizard driver support   zhengxunli
• [PATCH 1/2] clk: zynq: Add clock wizard driver   zhengxunli
• [PATCH 2/2] board: Add Zynq Mxic picozed development board support   zhengxunli
• [PATCH] sunxi: DT: A64: update devicetree files   Jernej Škrabec
• [PATCH] sunxi: DT: A64: update devicetree files   Jernej Škrabec
• [linux-sunxi] [PATCH] sunxi: board: Add H616 MMC2 pins   Jernej Škrabec
• [linux-sunxi] [PATCH] sunxi: clock: H6/H616: Fix PLL6 clock calculation   Jernej Škrabec
• 32-bit DMA limit for devices (and drivers)   Jernej Škrabec