[PATCH v2] arm: dts: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems

Lokesh Vutla lokeshvutla at ti.com
Fri Apr 16 17:57:06 CEST 2021



On 12/04/21 9:10 pm, Aswath Govindraju wrote:
> According to latest errata of J721e [1], HS400 mode is not supported
> in MMCSD0 subsystem (i2024) and SDR104 mode is not supported in MMCSD1/2
> subsystems (i2090). Therefore, replace mmc-hs400-1_8v with mmc-hs200-1_8v
> in MMCSD0 subsystem and add a sdhci mask to disable SDR104 speed mode.
> 
> Also, update the itap delay values for all the MMCSD subsystems according
> the latest J721e data sheet[2]
> 
> [1] - https://www.ti.com/lit/er/sprz455/sprz455.pdf
> [2] - https://www.ti.com/lit/ds/symlink/tda4vm.pdf
> 
> Fixes: 70e167495ab2 ("arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot")
> Signed-off-by: Aswath Govindraju <a-govindraju at ti.com>
> ---
> 
> Changes since v1:
> - Corrected the fixes tag.

Applied to u-boot-ti.

Thanks and regards,
Lokesh



More information about the U-Boot mailing list