[PATCH] apalis-imx8x: build instructions for module revision v1.1b
Philippe Schenker
philippe.schenker at toradex.com
Fri Apr 16 09:52:56 CEST 2021
On Thu, 2021-04-15 at 10:19 +0300, Oleksandr Suvorov wrote:
> Update the u-boot image build instructions to support the latest
> revision V1.1B of the module Apalis iMX8X. The rst document
> formatting is fixed.
>
> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov at toradex.com>
Thanks for taking this up!
Reviewed-by: Philippe Schenker <philippe.schenker at toradex.com>
> ---
>
> doc/board/toradex/apalix-imx8x.rst | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/doc/board/toradex/apalix-imx8x.rst
> b/doc/board/toradex/apalix-imx8x.rst
> index efa7e0c72e3..0b88a8143eb 100644
> --- a/doc/board/toradex/apalix-imx8x.rst
> +++ b/doc/board/toradex/apalix-imx8x.rst
> @@ -1,7 +1,7 @@
> .. SPDX-License-Identifier: GPL-2.0+
>
> -Apalis iMX8X V1.1A Module (SoC NXP i.MX8QXP RevB)
> -==========================
> +Apalis iMX8X V1.1B Module (SoC NXP i.MX8QXP RevC)
> +=================================================
>
> Quick Start
> -----------
> @@ -27,20 +27,20 @@ Get and Build the ARM Trusted Firmware
> $ cp imx-atf/build/imx8qx/release/bl31.bin $(builddir)
>
> Get System Controller firmware
> ----------------------------------------
> +------------------------------
>
> .. code-block:: bash
>
> $ wget
> https://github.com/toradex/i.MX-System-Controller-Firmware/raw/master/src/scfw_export_mx8qx_b0/build_mx8qx_b0/mx8qx-apalis-scfw-tcm.bin
>
> Get SECO container
> ----------------------------------------
> +------------------
>
> .. code-block:: bash
>
> $ wget
> https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-3.7.4.bin
> $ sh imx-seco-3.7.4.bin
> - $ cp imx-seco-3.7.4/firmware/seco/mx8qxb0-ahab-container.img
> $(builddir)/mx8qx-ahab-container.img
> + $ cp imx-seco-3.7.4/firmware/seco/mx8qxc0-ahab-container.img
> $(builddir)/mx8qx-ahab-container.img
>
> Build U-Boot
> ------------
More information about the U-Boot
mailing list