[PATCH] apalis-imx8x: build instructions for module revision v1.1b

[Oleksandr Suvorov]

Update the u-boot image build instructions to support the latest
revision V1.1B of the module Apalis iMX8X. The rst document
formatting is fixed.

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov at toradex.com>
---

 doc/board/toradex/apalix-imx8x.rst | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/doc/board/toradex/apalix-imx8x.rst b/doc/board/toradex/apalix-imx8x.rst
index efa7e0c72e3..0b88a8143eb 100644
--- a/doc/board/toradex/apalix-imx8x.rst
+++ b/doc/board/toradex/apalix-imx8x.rst
@@ -1,7 +1,7 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-Apalis iMX8X V1.1A Module (SoC NXP i.MX8QXP RevB)
-==========================
+Apalis iMX8X V1.1B Module (SoC NXP i.MX8QXP RevC)
+=================================================
 
 Quick Start
 -----------
@@ -27,20 +27,20 @@ Get and Build the ARM Trusted Firmware
     $ cp imx-atf/build/imx8qx/release/bl31.bin $(builddir)
 
 Get System Controller firmware
----------------------------------------
+------------------------------
 
 .. code-block:: bash
 
     $ wget https://github.com/toradex/i.MX-System-Controller-Firmware/raw/master/src/scfw_export_mx8qx_b0/build_mx8qx_b0/mx8qx-apalis-scfw-tcm.bin
 
 Get SECO container
----------------------------------------
+------------------
 
 .. code-block:: bash
 
     $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-3.7.4.bin
     $ sh imx-seco-3.7.4.bin
-    $ cp imx-seco-3.7.4/firmware/seco/mx8qxb0-ahab-container.img $(builddir)/mx8qx-ahab-container.img
+    $ cp imx-seco-3.7.4/firmware/seco/mx8qxc0-ahab-container.img $(builddir)/mx8qx-ahab-container.img
 
 Build U-Boot
 ------------
-- 
2.31.1