[PATCH 2/5] ARM: imx: udoo: Enable OF_CONTROL and DM gpio/pin control

[Peter Robinson]

Enable OF_CONTROL and DM for gpio and pin control support
on the i.MX6 based Udoo boards.

Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
---
 configs/udoo_defconfig | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/configs/udoo_defconfig b/configs/udoo_defconfig
index f72b9645da..bcc88356ce 100644
--- a/configs/udoo_defconfig
+++ b/configs/udoo_defconfig
@@ -5,10 +5,13 @@ CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-udoo"
+CONFIG_OF_LIST="imx6q-udoo imx6dl-udoo"
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x60000
 CONFIG_MX6QDL=y
 CONFIG_TARGET_UDOO=y
+CONFIG_OF_CONTROL=y
 CONFIG_SPL_TEXT_BASE=0x00908000
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
@@ -24,6 +27,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_MMC=y
+# CONFIG_CMD_PINMUX is not set
 CONFIG_CMD_SATA=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT4_WRITE=y
@@ -32,9 +36,12 @@ CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_DM=y
+CONFIG_DM_GPIO=y
 CONFIG_BOUNCE_BUFFER=y
 CONFIG_DWC_AHSATA=y
 CONFIG_FSL_USDHC=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
 CONFIG_MTD=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
-- 
2.31.1