[PATCH] board:pm9263 - Enable DM_ETH
Ilko Iliev
iliev at ronetix.at
Mon Apr 19 15:37:41 CEST 2021
Signed-off-by: Ilko Iliev <iliev at ronetix.at>
---
board/ronetix/pm9263/pm9263.c | 57 -----------------------------------
configs/pm9263_defconfig | 2 ++
include/configs/pm9263.h | 6 ----
3 files changed, 2 insertions(+), 63 deletions(-)
diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
index 95c0dec4db..46494b043f 100644
--- a/board/ronetix/pm9263/pm9263.c
+++ b/board/ronetix/pm9263/pm9263.c
@@ -19,10 +19,6 @@
#include <asm/arch/at91_matrix.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
-#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-#include <net.h>
-#endif
-#include <netdev.h>
#include <asm/mach-types.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -73,41 +69,6 @@ static void pm9263_nand_hw_init(void)
}
#endif
-#ifdef CONFIG_MACB
-static void pm9263_macb_hw_init(void)
-{
- /*
- * PB27 enables the 50MHz oscillator for Ethernet PHY
- * 1 - enable
- * 0 - disable
- */
- at91_set_pio_output(AT91_PIO_PORTB, 27, 1);
- at91_set_pio_value(AT91_PIO_PORTB, 27, 1); /* 1- enable, 0 - disable */
-
- at91_periph_clk_enable(ATMEL_ID_EMAC);
-
- /*
- * Disable pull-up on:
- * RXDV (PC25) => PHY normal mode (not Test mode)
- * ERX0 (PE25) => PHY ADDR0
- * ERX1 (PE26) => PHY ADDR1 => PHYADDR = 0x0
- *
- * PHY has internal pull-down
- */
-
- at91_set_pio_pullup(AT91_PIO_PORTC, 25, 0);
- at91_set_pio_pullup(AT91_PIO_PORTE, 25, 0);
- at91_set_pio_pullup(AT91_PIO_PORTE, 26, 0);
-
- /* Re-enable pull-up */
- at91_set_pio_pullup(AT91_PIO_PORTC, 25, 1);
- at91_set_pio_pullup(AT91_PIO_PORTE, 25, 1);
- at91_set_pio_pullup(AT91_PIO_PORTE, 26, 1);
-
- at91_macb_hw_init();
-}
-#endif
-
#ifdef CONFIG_LCD
#ifdef CONFIG_LCD_IN_PSRAM
@@ -233,9 +194,6 @@ int board_init(void)
#ifdef CONFIG_CMD_NAND
pm9263_nand_hw_init();
#endif
-#ifdef CONFIG_MACB
- pm9263_macb_hw_init();
-#endif
#ifdef CONFIG_USB_OHCI_NEW
at91_uhp_hw_init();
#endif
@@ -261,21 +219,6 @@ int dram_init_banksize(void)
return 0;
}
-#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
-{
-}
-#endif
-
-int board_eth_init(struct bd_info *bis)
-{
- int rc = 0;
-#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x01);
-#endif
- return rc;
-}
-
#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard (void)
{
diff --git a/configs/pm9263_defconfig b/configs/pm9263_defconfig
index 817a9847be..ef18e742d2 100644
--- a/configs/pm9263_defconfig
+++ b/configs/pm9263_defconfig
@@ -50,6 +50,8 @@ CONFIG_NAND_ATMEL=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_DATAFLASH=y
+CONFIG_DM_ETH=y
+CONFIG_MACB=y
CONFIG_DM_SERIAL=y
CONFIG_ATMEL_USART=y
CONFIG_SPI=y
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 6c882b6ff9..7b028751bd 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -204,12 +204,6 @@
AT91_MATRIX_SCFG_DEFMSTR_TYPE_FIXED | \
AT91_MATRIX_SCFG_SLOT_CYCLE(255))
-/* Ethernet */
-#define CONFIG_MACB 1
-#define CONFIG_RMII 1
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_RESET_PHY_R 1
-
/* USB */
#define CONFIG_USB_ATMEL
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
--
2.25.1
More information about the U-Boot
mailing list