[PATCH 7/8] ARM: embestmx6boards: convert mars/riot boards to DM_ETH
Peter Robinson
pbrobinson at gmail.com
Fri Apr 2 16:52:32 CEST 2021
Convert the boards to use DM_ETH.
Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
Cc: "Eric Bénard" <eric at eukrea.com>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
---
board/embest/mx6boards/mx6boards.c | 26 +-------------------------
configs/marsboard_defconfig | 2 ++
configs/riotboard_defconfig | 2 ++
include/configs/embestmx6boards.h | 6 ------
4 files changed, 5 insertions(+), 31 deletions(-)
diff --git a/board/embest/mx6boards/mx6boards.c b/board/embest/mx6boards/mx6boards.c
index c3bbcff0cf..dda8502c6f 100644
--- a/board/embest/mx6boards/mx6boards.c
+++ b/board/embest/mx6boards/mx6boards.c
@@ -91,24 +91,6 @@ static void setup_iomux_uart(void)
}
iomux_v3_cfg_t const enet_pads[] = {
- MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- /* GPIO16 -> AR8035 25MHz */
- MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
- /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
- MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL_CLK),
- MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD),
- MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD),
- MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL_PD),
/* AR8035 PHY Reset */
MX6_PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD),
/* AR8035 PHY Interrupt */
@@ -376,13 +358,6 @@ int overwrite_console(void)
return 1;
}
-int board_eth_init(struct bd_info *bis)
-{
- setup_iomux_enet();
-
- return cpu_eth_init(bis);
-}
-
int board_early_init_f(void)
{
u32 cputype = cpu_type(get_cpu_rev());
@@ -460,6 +435,7 @@ int board_late_init(void)
else if (board_type == BOARD_IS_RIOTBOARD)
add_board_boot_modes(marsboard_boot_modes);
#endif
+ setup_iomux_enet();
return 0;
}
diff --git a/configs/marsboard_defconfig b/configs/marsboard_defconfig
index 3e7b8ef0f5..2759c291da 100644
--- a/configs/marsboard_defconfig
+++ b/configs/marsboard_defconfig
@@ -40,6 +40,8 @@ CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_SPI_FLASH_SST=y
CONFIG_PHYLIB=y
CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_MXC_UART=y
CONFIG_SPI=y
diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig
index 1e5dc39318..12af407400 100644
--- a/configs/riotboard_defconfig
+++ b/configs/riotboard_defconfig
@@ -52,6 +52,8 @@ CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_SPI_FLASH_SST=y
CONFIG_PHYLIB=y
CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_MXC_UART=y
CONFIG_SPI=y
diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h
index c49d4dc0e4..a29eec00ae 100644
--- a/include/configs/embestmx6boards.h
+++ b/include/configs/embestmx6boards.h
@@ -36,12 +36,6 @@
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 4
-
#define CONFIG_ARP_TIMEOUT 200UL
/* Physical Memory Map */
--
2.31.1
More information about the U-Boot
mailing list