[PATCH 4/4] ARM: imx: udoo_neo: Convert to ethernet DM
Peter Robinson
pbrobinson at gmail.com
Thu Apr 1 22:08:13 CEST 2021
Convert the UDOO Neo to ethernet DM support.
Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
Cc: Francesco Montefoschi <francesco.montefoschi at udoo.org>
Cc: Breno Lima <breno.lima at nxp.com>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
---
board/udoo/neo/neo.c | 63 +++-----------------------------------
configs/udoo_neo_defconfig | 3 ++
include/configs/udoo_neo.h | 10 ------
3 files changed, 7 insertions(+), 69 deletions(-)
diff --git a/board/udoo/neo/neo.c b/board/udoo/neo/neo.c
index ef7de0aacc..92a1e084b5 100644
--- a/board/udoo/neo/neo.c
+++ b/board/udoo/neo/neo.c
@@ -9,7 +9,6 @@
*/
#include <init.h>
-#include <net.h>
#include <asm/arch/clock.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/imx-regs.h>
@@ -18,6 +17,7 @@
#include <asm/global_data.h>
#include <asm/gpio.h>
#include <asm/mach-imx/iomux-v3.h>
+#include <dm.h>
#include <env.h>
#include <asm/arch/crm_regs.h>
#include <asm/io.h>
@@ -28,8 +28,6 @@
#include <linux/sizes.h>
#include <common.h>
#include <i2c.h>
-#include <miiphy.h>
-#include <netdev.h>
#include <power/pmic.h>
#include <power/pfuze3000_pmic.h>
#include <malloc.h>
@@ -216,21 +214,6 @@ static iomux_v3_cfg_t const uart1_pads[] = {
MX6_PAD_GPIO1_IO05__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
};
-static iomux_v3_cfg_t const fec1_pads[] = {
- MX6_PAD_ENET1_MDC__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET1_MDIO__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII1_RX_CTL__ENET1_RX_EN | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_RGMII1_RD0__ENET1_RX_DATA_0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_RGMII1_RD1__ENET1_RX_DATA_1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_RGMII1_TX_CTL__ENET1_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII1_RXC__ENET1_RX_ER | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_RGMII1_TD0__ENET1_TX_DATA_0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII1_TD1__ENET1_TX_DATA_1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_ENET2_TX_CLK__GPIO2_IO_9 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_ENET1_CRS__GPIO2_IO_1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
-};
-
static iomux_v3_cfg_t const phy_control_pads[] = {
/* 25MHz Ethernet PHY Clock */
MX6_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M |
@@ -257,7 +240,7 @@ static void setup_iomux_uart(void)
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
}
-static int setup_fec(int fec_id)
+static int setup_fec(void)
{
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
int reg;
@@ -275,46 +258,7 @@ static int setup_fec(int fec_id)
reg |= BM_ANADIG_PLL_ENET_REF_25M_ENABLE;
writel(reg, &anatop->pll_enet);
- return enable_fec_anatop_clock(fec_id, ENET_25MHZ);
-}
-
-int board_eth_init(struct bd_info *bis)
-{
- uint32_t base = IMX_FEC_BASE;
- struct mii_dev *bus = NULL;
- struct phy_device *phydev = NULL;
- int ret;
-
- imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads));
-
- setup_fec(CONFIG_FEC_ENET_DEV);
-
- bus = fec_get_miibus(base, CONFIG_FEC_ENET_DEV);
- if (!bus)
- return -EINVAL;
-
- phydev = phy_find_by_mask(bus, (0x1 << CONFIG_FEC_MXC_PHYADDR),
- PHY_INTERFACE_MODE_RMII);
- if (!phydev) {
- free(bus);
- return -EINVAL;
- }
-
- ret = fec_probe(bis, CONFIG_FEC_ENET_DEV, base, bus, phydev);
- if (ret) {
- free(bus);
- free(phydev);
- return ret;
- }
- return 0;
-}
-
-int board_phy_config(struct phy_device *phydev)
-{
- if (phydev->drv->config)
- phydev->drv->config(phydev);
-
- return 0;
+ return enable_fec_anatop_clock(0, ENET_25MHZ);
}
int board_init(void)
@@ -374,6 +318,7 @@ static int get_board_value(void)
int board_early_init_f(void)
{
setup_iomux_uart();
+ setup_fec();
return 0;
}
diff --git a/configs/udoo_neo_defconfig b/configs/udoo_neo_defconfig
index 3df2ac19e7..a9b2e5bc1d 100644
--- a/configs/udoo_neo_defconfig
+++ b/configs/udoo_neo_defconfig
@@ -37,6 +37,8 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_DM=y
+CONFIG_DM_ETH=y
+CONFIG_FEC_MXC=y
CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
CONFIG_FSL_USDHC=y
@@ -46,6 +48,7 @@ CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_MII=y
+CONFIG_RGMII=y
CONFIG_MXC_UART=y
CONFIG_IMX_THERMAL=y
CONFIG_OF_LIBFDT=y
diff --git a/include/configs/udoo_neo.h b/include/configs/udoo_neo.h
index 4935a2b363..b6f75c9262 100644
--- a/include/configs/udoo_neo.h
+++ b/include/configs/udoo_neo.h
@@ -83,14 +83,4 @@
#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
#define PFUZE3000_I2C_BUS 0
-/* Network */
-#define CONFIG_FEC_MXC
-
-#define CONFIG_FEC_ENET_DEV 0
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_MXC_PHYADDR 0x0
-
-#define CONFIG_FEC_XCV_TYPE RMII
-#define CONFIG_ETHPRIME "FEC0"
-
#endif /* __CONFIG_H */
--
2.31.1
More information about the U-Boot
mailing list