[PATCH 04/17] arm: mach-k3: am642: Store boot info from ROM
Dave Gerlach
d-gerlach at ti.com
Fri Apr 23 18:27:35 CEST 2021
For AM642, ROM supports loading system firmware directly
from boot image. ROM passes information about the number of
images that are loaded to bootloader at a specific address
that is temporary. Add support for storing this information
somewhere permanent before it gets corrupted.
Signed-off-by: Dave Gerlach <d-gerlach at ti.com>
---
arch/arm/mach-k3/am642_init.c | 21 +++++++++++++++++++
arch/arm/mach-k3/include/mach/am64_hardware.h | 2 ++
2 files changed, 23 insertions(+)
diff --git a/arch/arm/mach-k3/am642_init.c b/arch/arm/mach-k3/am642_init.c
index 5ab2904c5e0c..7ebe5b56cd1f 100644
--- a/arch/arm/mach-k3/am642_init.c
+++ b/arch/arm/mach-k3/am642_init.c
@@ -29,12 +29,33 @@ static void ctrl_mmr_unlock(void)
mmr_unlock(CTRL_MMR0_BASE, 6);
}
+/*
+ * This uninitialized global variable would normal end up in the .bss section,
+ * but the .bss is cleared between writing and reading this variable, so move
+ * it to the .data section.
+ */
+u32 bootindex __section(".data");
+static struct rom_extended_boot_data bootdata __section(.data);
+
+static void store_boot_info_from_rom(void)
+{
+ bootindex = *(u32 *)(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX);
+ memcpy(&bootdata, (uintptr_t *)ROM_ENTENDED_BOOT_DATA_INFO,
+ sizeof(struct rom_extended_boot_data));
+}
+
void board_init_f(ulong dummy)
{
#if defined(CONFIG_CPU_V7R)
setup_k3_mpu_regions();
#endif
+ /*
+ * Cannot delay this further as there is a chance that
+ * K3_BOOT_PARAM_TABLE_INDEX can be over written by SPL MALLOC section.
+ */
+ store_boot_info_from_rom();
+
ctrl_mmr_unlock();
/* Init DM early */
diff --git a/arch/arm/mach-k3/include/mach/am64_hardware.h b/arch/arm/mach-k3/include/mach/am64_hardware.h
index ec5387025b98..c440685e608f 100644
--- a/arch/arm/mach-k3/include/mach/am64_hardware.h
+++ b/arch/arm/mach-k3/include/mach/am64_hardware.h
@@ -47,4 +47,6 @@
#define CTRLMMR_LOCK_KICK1 0x0100c
#define CTRLMMR_LOCK_KICK1_UNLOCK_VAL 0xd172bc5a
+#define ROM_ENTENDED_BOOT_DATA_INFO 0x701beb00
+
#endif /* __ASM_ARCH_DRA8_HARDWARE_H */
--
2.28.0
More information about the U-Boot
mailing list