[PATCH 21/37] arm: imx8ulp: Update the reset vector in u-boot
Peng Fan (OSS)
peng.fan at oss.nxp.com
Mon Apr 12 14:12:50 CEST 2021
From: Ye Li <ye.li at nxp.com>
Because we have set reset vector to ATF in SPL, have to set it back
to ROM for any reset in u-boot
Signed-off-by: Ye Li <ye.li at nxp.com>
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
arch/arm/mach-imx/imx8ulp/soc.c | 35 +++++++++++++++++++++------------
1 file changed, 22 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-imx/imx8ulp/soc.c b/arch/arm/mach-imx/imx8ulp/soc.c
index a1c229c4f0..044758157f 100644
--- a/arch/arm/mach-imx/imx8ulp/soc.c
+++ b/arch/arm/mach-imx/imx8ulp/soc.c
@@ -318,21 +318,10 @@ void get_board_serial(struct tag_serialnr *serialnr)
}
#endif
-int arch_cpu_init(void)
+static void set_core0_reset_vector(u32 entry)
{
- if (IS_ENABLED(CONFIG_SPL_BUILD))
- clock_init();
-
- return 0;
-}
-
-#if defined(CONFIG_SPL_BUILD)
-__weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
-{
- debug("image entry point: 0x%lx\n", spl_image->entry_point);
-
/* Update SIM1 DGO8 for reset vector base */
- writel((u32)spl_image->entry_point, SIM1_BASE_ADDR + 0x5c);
+ writel(entry, SIM1_BASE_ADDR + 0x5c);
/* set update bit */
setbits_le32(SIM1_BASE_ADDR + 0x8, 0x1 << 24);
@@ -346,6 +335,26 @@ __weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
/* clear the ack by set 1 */
setbits_le32(SIM1_BASE_ADDR + 0x8, (0x1 << 26));
+}
+
+int arch_cpu_init(void)
+{
+ if (IS_ENABLED(CONFIG_SPL_BUILD)) {
+ clock_init();
+ } else {
+ /* reconfigure core0 reset vector to ROM */
+ set_core0_reset_vector(0x1000);
+ }
+
+ return 0;
+}
+
+#if defined(CONFIG_SPL_BUILD)
+__weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
+{
+ debug("image entry point: 0x%lx\n", spl_image->entry_point);
+
+ set_core0_reset_vector((u32)spl_image->entry_point);
/* Enable the 512KB cache */
setbits_le32(SIM1_BASE_ADDR + 0x30, (0x1 << 4));
--
2.30.0
More information about the U-Boot
mailing list