[PATCH 2/4] ARM: imx: udoo_neo: Enable OF_CONTROL and DM gpio/pin control

[Peter Robinson]

Enable OF_CONTROL and DM for gpio and pin control support
on the i.MX6SX based Udoo Neo.

Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
Cc: Francesco Montefoschi <francesco.montefoschi at udoo.org>
Cc: Breno Lima <breno.lima at nxp.com>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
---
 configs/udoo_neo_defconfig | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/configs/udoo_neo_defconfig b/configs/udoo_neo_defconfig
index ba1e6d31f8..44ca8cfc3d 100644
--- a/configs/udoo_neo_defconfig
+++ b/configs/udoo_neo_defconfig
@@ -5,10 +5,13 @@ CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="imx6sx-udoo-neo-basic"
+CONFIG_OF_LIST="imx6sx-udoo-neo-basic imx6sx-udoo-neo-extended imx6sx-udoo-neo-full"
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x80000
 CONFIG_MX6SX=y
 CONFIG_TARGET_UDOO_NEO=y
+CONFIG_OF_CONTROL=y
 CONFIG_SPL_TEXT_BASE=0x00908000
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
@@ -26,13 +29,18 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_CACHE=y
+# CONFIG_CMD_PINMUX is not set
 CONFIG_CMD_TIME=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_BOUNCE_BUFFER=y
+CONFIG_DM=y
+CONFIG_DM_GPIO=y
 CONFIG_FSL_USDHC=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ8XXX=y
-- 
2.31.1