[PATCH v1 04/10] net: mvpp2: remove redundant SMI address configuration

[Stefan Roese]

From: Marcin Wojtas <mw at semihalf.com>

Because the mvpp2 driver now relies on the PHYLIB and
the external MDIO driver, configuring low level
SMI bus settings is redundant.

Signed-off-by: Marcin Wojtas <mw at semihalf.com>
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins at marvell.com>
Reviewed-by: Kostya Porotchkin <kostap at marvell.com>
Reviewed-by: Stefan Chulski <stefanc at marvell.com>
Signed-off-by: Stefan Roese <sr at denx.de>
---

 drivers/net/mvpp2.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c
index 847007d5b487..2043bdf10aa4 100644
--- a/drivers/net/mvpp2.c
+++ b/drivers/net/mvpp2.c
@@ -5292,14 +5292,6 @@ static int mvpp2_write_hwaddr(struct udevice *dev)
 	return mvpp2_prs_update_mac_da(port, port->dev_addr);
 }
 
-static int mvpp22_smi_phy_addr_cfg(struct mvpp2_port *port)
-{
-	writel(port->phyaddr, port->priv->iface_base +
-	       MVPP22_SMI_PHY_ADDR_REG(port->gop_id));
-
-	return 0;
-}
-
 static int mvpp2_base_probe(struct udevice *dev)
 {
 	struct mvpp2 *priv = dev_get_priv(dev);
@@ -5422,10 +5414,6 @@ static int mvpp2_probe(struct udevice *dev)
 		port->base = priv->iface_base + MVPP22_PORT_BASE +
 			port->gop_id * MVPP22_PORT_OFFSET;
 
-		/* Set phy address of the port */
-		if (port->phyaddr < PHY_MAX_ADDR)
-			mvpp22_smi_phy_addr_cfg(port);
-
 		/* GoP Init */
 		gop_port_init(port);
 	}
-- 
2.31.1