[PATCH v2 07/13] mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driver

[Jaehoon Chung]

Hi Masami,

On 4/17/21 8:38 AM, Masami Hiramatsu wrote:
> From: Jassi Brar <jaswinder.singh at linaro.org>
> 
> Signed-off-by: Jassi Brar <jaswinder.singh at linaro.org>
> Signed-off-by: Masami Hiramatsu <masami.hiramatsu at linaro.org>
> ---
>  drivers/mmc/Kconfig   |   10 ++++++
>  drivers/mmc/Makefile  |    1 +
>  drivers/mmc/f_sdh30.c |   81 +++++++++++++++++++++++++++++++++++++++++++++++++
>  drivers/mmc/sdhci.c   |    9 +++++
>  4 files changed, 101 insertions(+)
>  create mode 100644 drivers/mmc/f_sdh30.c
> 
> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
> index f8ca52efb6..a9ae419e41 100644
> --- a/drivers/mmc/Kconfig
> +++ b/drivers/mmc/Kconfig
> @@ -549,6 +549,16 @@ config MMC_SDHCI_IPROC
>  
>  	  If unsure, say N.
>  
> +config F_SDH30_SDHCI

MMS_SDHCI_F_SDH30 or MMC_SDHCI_xxx. 

> +	bool "SDHCI support for Fujitsu Semiconductor F_SDH30"
> +	depends on BLK && DM_MMC
> +	depends on MMC_SDHCI
> +	help
> +	  This selects the Secure Digital Host Controller Interface (SDHCI)
> +	  Needed by some Fujitsu SoC for MMC / SD / SDIO support.
> +	  If you have a controller with this interface, say Y or M here.
> +	  If unsure, say N.
> +
>  config MMC_SDHCI_KONA
>  	bool "SDHCI support on Broadcom KONA platform"
>  	depends on MMC_SDHCI
> diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
> index 89d6af3db3..b48a76ba94 100644
> --- a/drivers/mmc/Makefile
> +++ b/drivers/mmc/Makefile
> @@ -76,3 +76,4 @@ obj-$(CONFIG_MMC_UNIPHIER)		+= tmio-common.o uniphier-sd.o
>  obj-$(CONFIG_RENESAS_SDHI)		+= tmio-common.o renesas-sdhi.o
>  obj-$(CONFIG_MMC_BCM2835)		+= bcm2835_sdhost.o
>  obj-$(CONFIG_MMC_MTK)			+= mtk-sd.o
> +obj-$(CONFIG_F_SDH30_SDHCI)		+= f_sdh30.o
> diff --git a/drivers/mmc/f_sdh30.c b/drivers/mmc/f_sdh30.c
> new file mode 100644
> index 0000000000..44c6521bfe
> --- /dev/null
> +++ b/drivers/mmc/f_sdh30.c
> @@ -0,0 +1,81 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Socionext F_SDH30 eMMC driver
> + * Copyright 2021 Linaro Ltd.
> + * Copyright 2021 Socionext, Inc.
> + */
> +
> +#include <common.h>
> +#include <clk.h>
> +#include <dm.h>
> +#include <malloc.h>
> +#include <sdhci.h>
> +
> +struct f_sdh30_plat {
> +	struct mmc_config cfg;
> +	struct mmc mmc;
> +};
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +static int f_sdh30_probe(struct udevice *dev)

xxx_sdhci_probe().

> +{
> +	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
> +	struct f_sdh30_plat *plat = dev_get_plat(dev);
> +	struct sdhci_host *host = dev_get_priv(dev);
> +	int ret;
> +
> +	ret = mmc_of_parse(dev, &plat->cfg);
> +	if (ret)
> +		return ret;
> +
> +	host->mmc = &plat->mmc;
> +	host->mmc->dev = dev;
> +	host->mmc->priv = host;
> +
> +	ret = sdhci_setup_cfg(&plat->cfg, host, 200000000, 400000);
> +	if (ret)
> +		return ret;
> +
> +	upriv->mmc = host->mmc;
> +
> +	mmc_set_clock(host->mmc, host->mmc->cfg->f_min, MMC_CLK_ENABLE);
> +
> +	return sdhci_probe(dev);
> +}
> +
> +static int f_sdh30_of_to_plat(struct udevice *dev)
> +{
> +	struct sdhci_host *host = dev_get_priv(dev);
> +
> +	host->name = strdup(dev->name);
> +	host->ioaddr = dev_read_addr_ptr(dev);
> +	host->bus_width = dev_read_u32_default(dev, "bus-width", 4);
> +	host->index = dev_read_u32_default(dev, "index", 0);
> +
> +	return 0;
> +}
> +
> +static int f_sdh30_bind(struct udevice *dev)
> +{
> +	struct f_sdh30_plat *plat = dev_get_plat(dev);
> +
> +	return sdhci_bind(dev, &plat->mmc, &plat->cfg);
> +}
> +
> +static const struct udevice_id f_sdh30_mmc_ids[] = {
> +	{ .compatible = "fujitsu,mb86s70-sdhci-3.0" },
> +	{ }
> +};
> +
> +U_BOOT_DRIVER(f_sdh30_drv) = {
> +	.name		= "f_sdh30_sdhci",
> +	.id		= UCLASS_MMC,
> +	.of_match	= f_sdh30_mmc_ids,
> +	.of_to_plat	= f_sdh30_of_to_plat,
> +	.ops		= &sdhci_ops,
> +	.bind		= f_sdh30_bind,
> +	.probe		= f_sdh30_probe,
> +	.priv_auto	= sizeof(struct sdhci_host),
> +	.plat_auto	= sizeof(struct f_sdh30_plat),
> +};
> diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
> index d9ab6a0a83..f038debc6c 100644
> --- a/drivers/mmc/sdhci.c
> +++ b/drivers/mmc/sdhci.c
> @@ -708,6 +708,15 @@ static int sdhci_init(struct mmc *mmc)
>  
>  	sdhci_set_power(host, fls(mmc->cfg->voltages) - 1);
>  
> +	if (IS_ENABLED(CONFIG_F_SDH30_SDHCI)) {

I don't want to add specific sdhci driver configuration in sdhci.c.

According to below comment and Specification,
it has to delay 1ms. Can it be removed the above condition checking?

> +		/*
> +		 * Reference to Part1 Physical Layer Simplified Specification
> +		 * Ver 3.01, 6.4.1 Power Up
> +		 * This delay must be at least 74 clock sizes, or 1 ms.
> +		 */
> +		udelay(1000);

I don't have any objection about this, If possible, it needs to calculate clock-cycle with real clock value in future.

Best Regards,
Jaehoon Chung

> +	}
> +
>  	if (host->ops && host->ops->get_cd)
>  		host->ops->get_cd(host);
>  
> 
>