[PATCH v1 00/10] net: mvpp2: Sync Marvell mvpp2 driver with Marvell version
Stefan Roese
sr at denx.de
Tue Apr 27 15:27:07 CEST 2021
This patchset adds the missing ethernet mvpp2 patches from the Marvell
U-Boot SDK version to support and fix higher connection speeds. This is
done in preparation for the integration of the Octeon TX2 CN913x
support, which uses the updated version of this code.
Please note that I explicitly did not remove the incorrectly used
PHY_INTERFACE_MODE_SGMII_2500 changes from these patches. This makes it
easier to follow the Marvell downstream code. SGMII_2500 will be
removed by the follow-up patch, that I already did send a bit earlier
today. Sorry, I forgot to send this series earlier.
Thanks,
Stefan
Ben Peled (3):
net: mvpp2: AN Bypass in 1000 and 2500 basex mode
net: mvpp2: remove unused define MVPP22_SMI_PHY_ADDR_REG
net: mvpp2: fix missing switch case break
Marcin Wojtas (2):
net: mvpp2: remove redundant SMI address configuration
net: mvpp2: add explicit sgmii-2500 support
Stefan Chulski (5):
phy: introduce 1000BaseX and 2500BaseX modes
net: mvpp2: add CP115 port1 10G/5G SFI support
net: mvpp2: add 1000BaseX and 2500BaseX ppv2 support
net: mvpp2: Fix 2.5G GMII_SPEED configurations
net: mvpp2: allow MDIO registration for fixed links
drivers/net/mvpp2.c | 257 +++++++++++++++++++++++++---------------
include/phy_interface.h | 4 +
2 files changed, 163 insertions(+), 98 deletions(-)
--
2.31.1
More information about the U-Boot
mailing list