[PATCH v5 5/7] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
dillon.minfei at gmail.com
dillon.minfei at gmail.com
Fri Apr 9 09:28:44 CEST 2021
From: dillon min <dillon.minfei at gmail.com>
This patchset has following changes:
- introduce stm32h750.dtsi to support stm32h750 value line
- add pin groups for usart3/uart4/spi1/sdmmc2
- add stm32h750i-art-pi.dtb (arch/arm/boot/dts/Makefile)
- add stm32h750i-art-pi.dts to support art-pi board
- add stm32h750i-art-pi-u-boot.dtsi to support art-pi board (u-boot)
art-pi board component:
- 8MiB qspi flash
- 16MiB spi flash
- 32MiB sdram
- ap6212 wifi&bt&fm
the detail board information can be found at:
https://art-pi.gitee.io/website/
Signed-off-by: dillon min <dillon.minfei at gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
---
v5: no changes
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/stm32h7-pinctrl.dtsi | 89 ++++++++++++++
arch/arm/dts/stm32h750.dtsi | 5 +
arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi | 81 +++++++++++++
arch/arm/dts/stm32h750i-art-pi.dts | 188 +++++++++++++++++++++++++++++
include/dt-bindings/memory/stm32-sdram.h | 2 +
6 files changed, 367 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/stm32h750.dtsi
create mode 100644 arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi
create mode 100644 arch/arm/dts/stm32h750i-art-pi.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index c671082..0f54801 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -454,7 +454,8 @@ dtb-$(CONFIG_STM32F7) += stm32f746-disco.dtb \
stm32f769-disco.dtb \
stm32746g-eval.dtb
dtb-$(CONFIG_STM32H7) += stm32h743i-disco.dtb \
- stm32h743i-eval.dtb
+ stm32h743i-eval.dtb \
+ stm32h750i-art-pi.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
diff --git a/arch/arm/dts/stm32h7-pinctrl.dtsi b/arch/arm/dts/stm32h7-pinctrl.dtsi
index f6968b5..aefa324 100644
--- a/arch/arm/dts/stm32h7-pinctrl.dtsi
+++ b/arch/arm/dts/stm32h7-pinctrl.dtsi
@@ -137,6 +137,80 @@
};
};
+ sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('D', 6, AF11)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 7, AF11)>; /* SDMMC1_CMD */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('D', 6, AF11)>; /* SDMMC1_CK */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2{
+ pinmux = <STM32_PINMUX('D', 7, AF11)>; /* SDMMC1_CMD */
+ slew-rate = <3>;
+ drive-open-drain;
+ bias-disable;
+ };
+ };
+
+ sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('D', 6, ANALOG)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 7, ANALOG)>; /* SDMMC1_CMD */
+ };
+ };
+
+ spi1_pins: spi1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('A', 5, AF5)>,
+ /* SPI1_CLK */
+ <STM32_PINMUX('B', 5, AF5)>;
+ /* SPI1_MOSI */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('G', 9, AF5)>;
+ /* SPI1_MISO */
+ bias-disable;
+ };
+ };
+
+ uart4_pins: uart4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('A', 0, AF8)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('I', 9, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
usart1_pins: usart1-0 {
pins1 {
pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
@@ -163,6 +237,21 @@
};
};
+ usart3_pins: usart3-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+ <STM32_PINMUX('D', 12, AF7)>; /* USART3_RTS_DE */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 11, AF7)>, /* USART3_RX */
+ <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
+ bias-disable;
+ };
+ };
+
usbotg_hs_pins_a: usbotg-hs-0 {
pins {
pinmux = <STM32_PINMUX('H', 4, AF10)>, /* ULPI_NXT */
diff --git a/arch/arm/dts/stm32h750.dtsi b/arch/arm/dts/stm32h750.dtsi
new file mode 100644
index 0000000..99533f3
--- /dev/null
+++ b/arch/arm/dts/stm32h750.dtsi
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/* Copyright (C) STMicroelectronics 2021 - All Rights Reserved */
+
+#include "stm32h743.dtsi"
+
diff --git a/arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi b/arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi
new file mode 100644
index 0000000..326a553
--- /dev/null
+++ b/arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <stm32h7-u-boot.dtsi>
+
+&fmc {
+ /*
+ * Memory configuration from sdram datasheet W9825G6KH
+ * first bank is bank at 0
+ * second bank is bank at 1
+ */
+ bank1: bank at 0 {
+ st,sdram-control = /bits/ 8 <NO_COL_9
+ NO_ROW_13
+ MWIDTH_16
+ BANKS_4
+ CAS_2
+ SDCLK_3
+ RD_BURST_EN
+ RD_PIPE_DL_0>;
+ st,sdram-timing = /bits/ 8 <TMRD_2
+ TXSR_6
+ TRAS_6
+ TRC_6
+ TRP_2
+ TWR_2
+ TRCD_2>;
+ st,sdram-refcount = <677>;
+ };
+};
+
+&pinctrl {
+ fmc_pins: fmc at 0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 0, AF12)>,
+ <STM32_PINMUX('D', 1, AF12)>,
+ <STM32_PINMUX('D', 8, AF12)>,
+ <STM32_PINMUX('D', 9, AF12)>,
+ <STM32_PINMUX('D',10, AF12)>,
+ <STM32_PINMUX('D',14, AF12)>,
+ <STM32_PINMUX('D',15, AF12)>,
+
+ <STM32_PINMUX('E', 0, AF12)>,
+ <STM32_PINMUX('E', 1, AF12)>,
+ <STM32_PINMUX('E', 7, AF12)>,
+ <STM32_PINMUX('E', 8, AF12)>,
+ <STM32_PINMUX('E', 9, AF12)>,
+ <STM32_PINMUX('E',10, AF12)>,
+ <STM32_PINMUX('E',11, AF12)>,
+ <STM32_PINMUX('E',12, AF12)>,
+ <STM32_PINMUX('E',13, AF12)>,
+ <STM32_PINMUX('E',14, AF12)>,
+ <STM32_PINMUX('E',15, AF12)>,
+
+ <STM32_PINMUX('F', 0, AF12)>,
+ <STM32_PINMUX('F', 1, AF12)>,
+ <STM32_PINMUX('F', 2, AF12)>,
+ <STM32_PINMUX('F', 3, AF12)>,
+ <STM32_PINMUX('F', 4, AF12)>,
+ <STM32_PINMUX('F', 5, AF12)>,
+ <STM32_PINMUX('F',11, AF12)>,
+ <STM32_PINMUX('F',12, AF12)>,
+ <STM32_PINMUX('F',13, AF12)>,
+ <STM32_PINMUX('F',14, AF12)>,
+ <STM32_PINMUX('F',15, AF12)>,
+
+ <STM32_PINMUX('G', 0, AF12)>,
+ <STM32_PINMUX('G', 1, AF12)>,
+ <STM32_PINMUX('G', 2, AF12)>,
+ <STM32_PINMUX('G', 4, AF12)>,
+ <STM32_PINMUX('G', 5, AF12)>,
+ <STM32_PINMUX('G', 8, AF12)>,
+ <STM32_PINMUX('G',15, AF12)>,
+
+ <STM32_PINMUX('H', 5, AF12)>,
+ <STM32_PINMUX('C', 2, AF12)>,
+ <STM32_PINMUX('C', 3, AF12)>;
+
+ slew-rate = <3>;
+ };
+ };
+};
diff --git a/arch/arm/dts/stm32h750i-art-pi.dts b/arch/arm/dts/stm32h750i-art-pi.dts
new file mode 100644
index 0000000..2a4d1cb
--- /dev/null
+++ b/arch/arm/dts/stm32h750i-art-pi.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2021 - Dillon Min <dillon.minfei at gmail.com>
+ *
+ */
+
+/dts-v1/;
+#include "stm32h750.dtsi"
+#include "stm32h7-pinctrl.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "RT-Thread STM32H750i-ART-PI board";
+ compatible = "st,stm32h750i-art-pi", "st,stm32h750";
+
+ chosen {
+ bootargs = "root=/dev/ram";
+ stdout-path = "serial0:2000000n8";
+ };
+
+ memory at c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x2000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ no-map;
+ size = <0x100000>;
+ linux,dma-default;
+ };
+ };
+
+ aliases {
+ serial0 = &uart4;
+ serial1 = &usart3;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-red {
+ gpios = <&gpioi 8 0>;
+ };
+ led-green {
+ gpios = <&gpioc 15 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ v3v3: regulator-v3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ wlan_pwr: regulator-wlan {
+ compatible = "regulator-fixed";
+
+ regulator-name = "wl-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&clk_hse {
+ clock-frequency = <25000000>;
+};
+
+&dma1 {
+ status = "okay";
+};
+
+&dma2 {
+ status = "okay";
+};
+
+&mac {
+ status = "disabled";
+ pinctrl-0 = <ðernet_rmii>;
+ pinctrl-names = "default";
+ phy-mode = "rmii";
+ phy-handle = <&phy0>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+ };
+};
+
+&sdmmc1 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ broken-cd;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&v3v3>;
+ status = "okay";
+};
+
+&sdmmc2 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc2_b4_pins_a>;
+ pinctrl-1 = <&sdmmc2_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
+ broken-cd;
+ non-removable;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&wlan_pwr>;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ brcmf: bcrmf at 1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-0 = <&spi1_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpioa 4 GPIO_ACTIVE_LOW>;
+ dmas = <&dmamux1 37 0x400 0x05>,
+ <&dmamux1 38 0x400 0x05>;
+ dma-names = "rx", "tx";
+
+ flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q128", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+
+ partition at 0 {
+ label = "root filesystem";
+ reg = <0 0x1000000>;
+ };
+ };
+};
+
+&usart2 {
+ pinctrl-0 = <&usart2_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+};
+
+&usart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usart3_pins>;
+ dmas = <&dmamux1 45 0x400 0x05>,
+ <&dmamux1 46 0x400 0x05>;
+ dma-names = "rx", "tx";
+ st,hw-flow-ctrl;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ host-wakeup-gpios = <&gpioc 0 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gpioi 10 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpioi 11 GPIO_ACTIVE_HIGH>;
+ max-speed = <115200>;
+ };
+};
+
+&uart4 {
+ pinctrl-0 = <&uart4_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
diff --git a/include/dt-bindings/memory/stm32-sdram.h b/include/dt-bindings/memory/stm32-sdram.h
index ab91d2b..90ef2e1 100644
--- a/include/dt-bindings/memory/stm32-sdram.h
+++ b/include/dt-bindings/memory/stm32-sdram.h
@@ -34,8 +34,10 @@
#define TXSR_1 (1 - 1)
#define TXSR_6 (6 - 1)
#define TXSR_7 (7 - 1)
+#define TXSR_8 (8 - 1)
#define TRAS_1 (1 - 1)
#define TRAS_4 (4 - 1)
+#define TRAS_6 (6 - 1)
#define TRC_6 (6 - 1)
#define TWR_1 (1 - 1)
#define TWR_2 (2 - 1)
--
2.7.4
More information about the U-Boot
mailing list