[PATCH] test: Alphabetize dm Makefile
Sean Anderson
sean.anderson at seco.com
Tue Apr 20 17:03:12 CEST 2021
Recently, tests have been added primarily to the end of the dm Makefile.
This results in merge conflicts when two people add new tests at the
same time. To reduce these conflicts, alphabetize the makefile.
Signed-off-by: Sean Anderson <sean.anderson at seco.com>
---
test/dm/Makefile | 64 ++++++++++++++++++++++++------------------------
1 file changed, 32 insertions(+), 32 deletions(-)
diff --git a/test/dm/Makefile b/test/dm/Makefile
index 100e7701d2..52a8c932b8 100644
--- a/test/dm/Makefile
+++ b/test/dm/Makefile
@@ -21,26 +21,39 @@ ifneq ($(CONFIG_SANDBOX),)
obj-$(CONFIG_ACPIGEN) += acpi.o
obj-$(CONFIG_ACPIGEN) += acpigen.o
obj-$(CONFIG_ACPIGEN) += acpi_dp.o
+obj-$(CONFIG_ADC) += adc.o
obj-$(CONFIG_SOUND) += audio.o
+obj-$(CONFIG_AXI) += axi.o
obj-$(CONFIG_BLK) += blk.o
obj-$(CONFIG_BUTTON) += button.o
obj-$(CONFIG_DM_BOOTCOUNT) += bootcount.o
obj-$(CONFIG_CLK) += clk.o clk_ccf.o
+obj-$(CONFIG_CPU) += cpu.o
obj-$(CONFIG_CROS_EC) += cros_ec.o
obj-$(CONFIG_DEVRES) += devres.o
+obj-$(CONFIG_DMA) += dma.o
obj-$(CONFIG_VIDEO_MIPI_DSI) += dsi_host.o
obj-$(CONFIG_DM_DSA) += dsa.o
obj-$(CONFIG_DM_ETH) += eth.o
+ifneq ($(CONFIG_EFI_PARTITION),)
+obj-$(CONFIG_FASTBOOT_FLASH_MMC) += fastboot.o
+endif
obj-$(CONFIG_FIRMWARE) += firmware.o
obj-$(CONFIG_DM_GPIO) += gpio.o
obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock.o
obj-$(CONFIG_DM_I2C) += i2c.o
obj-$(CONFIG_SOUND) += i2s.o
obj-y += irq.o
+obj-$(CONFIG_CLK_K210_SET_RATE) += k210_pll.o
obj-$(CONFIG_LED) += led.o
obj-$(CONFIG_DM_MAILBOX) += mailbox.o
+obj-$(CONFIG_DM_MDIO) += mdio.o
+obj-$(CONFIG_DM_MDIO_MUX) += mdio_mux.o
+obj-$(CONFIG_MISC) += misc.o
obj-$(CONFIG_DM_MMC) += mmc.o
obj-$(CONFIG_CMD_MUX) += mux-cmd.o
+obj-$(CONFIG_MULTIPLEXER) += mux-emul.o
+obj-$(CONFIG_MUX_MMIO) += mux-mmio.o
obj-y += fdtdec.o
obj-$(CONFIG_UT_DM) += nop.o
obj-y += ofnode.o
@@ -53,53 +66,40 @@ obj-$(CONFIG_P2SB) += p2sb.o
obj-$(CONFIG_PCI_ENDPOINT) += pci_ep.o
obj-$(CONFIG_PCH) += pch.o
obj-$(CONFIG_PHY) += phy.o
+ifneq ($(CONFIG_PINMUX),)
+obj-$(CONFIG_PINCONF) += pinmux.o
+endif
obj-$(CONFIG_POWER_DOMAIN) += power-domain.o
obj-$(CONFIG_ACPI_PMC) += pmc.o
+obj-$(CONFIG_DM_PMIC) += pmic.o
obj-$(CONFIG_DM_PWM) += pwm.o
+obj-$(CONFIG_QFW) += qfw.o
obj-$(CONFIG_RAM) += ram.o
obj-y += regmap.o
obj-$(CONFIG_REMOTEPROC) += remoteproc.o
obj-$(CONFIG_DM_RESET) += reset.o
obj-$(CONFIG_SYSRESET) += sysreset.o
+obj-$(CONFIG_DM_REGULATOR) += regulator.o
+obj-$(CONFIG_DM_RNG) += rng.o
obj-$(CONFIG_DM_RTC) += rtc.o
+obj-$(CONFIG_SCMI_FIRMWARE) += scmi.o
+obj-$(CONFIG_DM_SERIAL) += serial.o
obj-$(CONFIG_DM_SPI_FLASH) += sf.o
+obj-$(CONFIG_SIMPLE_BUS) += simple-bus.o
+obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
obj-$(CONFIG_SMEM) += smem.o
-obj-$(CONFIG_DM_SPI) += spi.o
-obj-y += syscon.o
-obj-$(CONFIG_MUX_MMIO) += mux-mmio.o
-obj-$(CONFIG_MULTIPLEXER) += mux-emul.o
-obj-$(CONFIG_DM_USB) += usb.o
-obj-$(CONFIG_DM_PMIC) += pmic.o
-obj-$(CONFIG_DM_REGULATOR) += regulator.o
-obj-$(CONFIG_TIMER) += timer.o
-obj-$(CONFIG_DM_VIDEO) += video.o
-obj-$(CONFIG_ADC) += adc.o
-obj-$(CONFIG_SPMI) += spmi.o
-obj-$(CONFIG_WDT) += wdt.o
-obj-$(CONFIG_AXI) += axi.o
-obj-$(CONFIG_MISC) += misc.o
-obj-$(CONFIG_DM_SERIAL) += serial.o
-obj-$(CONFIG_CPU) += cpu.o
obj-$(CONFIG_SOC_DEVICE) += soc.o
obj-$(CONFIG_SOUND) += sound.o
+obj-$(CONFIG_DM_SPI) += spi.o
+obj-$(CONFIG_SPMI) += spmi.o
+obj-y += syscon.o
+obj-$(CONFIG_RESET_SYSCON) += syscon-reset.o
obj-$(CONFIG_SYSINFO) += sysinfo.o
obj-$(CONFIG_TEE) += tee.o
+obj-$(CONFIG_TIMER) += timer.o
+obj-$(CONFIG_DM_USB) += usb.o
+obj-$(CONFIG_DM_VIDEO) += video.o
obj-$(CONFIG_VIRTIO_SANDBOX) += virtio.o
-obj-$(CONFIG_DMA) += dma.o
-obj-$(CONFIG_DM_MDIO) += mdio.o
-obj-$(CONFIG_DM_MDIO_MUX) += mdio_mux.o
-obj-$(CONFIG_DM_RNG) += rng.o
-obj-$(CONFIG_CLK_K210_SET_RATE) += k210_pll.o
-obj-$(CONFIG_SIMPLE_BUS) += simple-bus.o
-obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
-obj-$(CONFIG_RESET_SYSCON) += syscon-reset.o
-obj-$(CONFIG_SCMI_FIRMWARE) += scmi.o
-ifneq ($(CONFIG_PINMUX),)
-obj-$(CONFIG_PINCONF) += pinmux.o
-endif
-ifneq ($(CONFIG_EFI_PARTITION),)
-obj-$(CONFIG_FASTBOOT_FLASH_MMC) += fastboot.o
-endif
-obj-$(CONFIG_QFW) += qfw.o
+obj-$(CONFIG_WDT) += wdt.o
endif
endif # !SPL
--
2.25.1
More information about the U-Boot
mailing list