[PATCH 2/2] ARM: board: usbarmory: Convert to OF_CONTROL and DM
Peter Robinson
pbrobinson at gmail.com
Thu Apr 1 23:17:06 CEST 2021
Convert usbarmory to OF_CONTROL and DM for gpio, pin
usb support on the i.MX53 based usbarmory.
Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
Cc: Andrej Rosano <andrej at inversepath.com>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
---
configs/usbarmory_defconfig | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/configs/usbarmory_defconfig b/configs/usbarmory_defconfig
index e1128e5d6a..39fe860e59 100644
--- a/configs/usbarmory_defconfig
+++ b/configs/usbarmory_defconfig
@@ -2,11 +2,13 @@ CONFIG_ARM=y
CONFIG_ARCH_MX5=y
CONFIG_SYS_TEXT_BASE=0x77800000
CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="imx53-usbarmory"
CONFIG_SYS_MEMTEST_START=0x70000000
CONFIG_SYS_MEMTEST_END=0x90000000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x60000
CONFIG_TARGET_USBARMORY=y
+CONFIG_OF_CONTROL=y
# CONFIG_CMD_BMODE is not set
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_USE_BOOTCOMMAND is not set
@@ -14,13 +16,22 @@ CONFIG_CMD_MEMTEST=y
CONFIG_CMD_FUSE=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
+# CONFIG_CMD_PINMUX is not set
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DM=y
+CONFIG_DM_GPIO=y
CONFIG_FSL_ESDHC_IMX=y
CONFIG_MTD=y
CONFIG_MXC_UART=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX5=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_EHCI_MX5=y
CONFIG_OF_LIBFDT=y
--
2.31.1
More information about the U-Boot
mailing list