Please pull u-boot-marvell/master
Stefan Roese
sr at denx.de
Thu Apr 29 08:47:03 CEST 2021
Hi Tom,
please pull the next batch of Marvell Armada related patches. Here the
summary log:
----------------------------------------------------------------
- Add base support for Marvell OcteonTX2 CN9130 CRB (mostly done
by Kostya)
- Sync Armada 3k/7k/8k SERDES code with Marvell version (misc Marvell
authors)
- pci-aardvark: Fix processing PIO transfers (Pali)
----------------------------------------------------------------
Here the Azure build, without any issues:
https://dev.azure.com/sr0718/u-boot/_build/results?buildId=83&view=results
Thanks,
Stefan
The following changes since commit 939c4934c8e91b34b258c9487be6a889a6a43546:
configs: Resync with savedefconfig (2021-04-28 10:05:13 +0200)
are available in the Git repository at:
git at source.denx.de:u-boot/custodians/u-boot-marvell.git
for you to fetch changes up to eccbd4ad8e4e182638eafbfb87ac139c04f24a01:
arm: a37xx: pci: Fix processing PIO transfers (2021-04-29 07:45:43 +0200)
----------------------------------------------------------------
Christine Gharzuzi (1):
phy: marvell: fix handling of unconnected comphy
Grzegorz Jaszczyk (8):
phy: marvell: cp110: let the firmware configure comphy for RXAUI
phy: marvell: cp110: let the firmware configure comphy for USB
phy: marvell: cp110: let the firmware perform training for XFI
phy: marvell: cp110: remove both phy and pipe selector configuration
phy: marvell: cp110: clean up driver after it was moved to atf
phy: marvell: allow to initialize up to 6 USB ports
phy: marvell: fix pll initialization for second utmi port
phy: marvell: utmi: update utmi config which fixes usb2.0 instability
Igal Liberman (11):
phy: marvell: rename comphy related definitions to COMPHY_XX
phy: marvell: add missing speed during info prints
phy: marvell: cp110: utmi: update analog parameters according to
latest ETP
phy: marvell: fix several minor bugs in comphy_probe
phy: marvell: save comphy_map_data priv structure
phy: marvell: add RX training command
phy: marvell: enable comphy info prints for all devices
phy: marvell: pass sgmii id to firmware
phy: marvell: cp110: mark u-boot power-off calls
phy: marvell: add support for SFI1
doc: dt-bindings: add Marvell comphy binding
Konstantin Porotchkin (7):
power: regulator: Add support for regulator-force-boot-off
cmd/mvebu: fix the bubt command
arm: armada: dts: Use a single dtsi for cp110 die description
arm: armada: dts: Add support for ap807-based platforms
arm: armada: configs: Move environment location for mvebu
arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN9130 CRB
arm: octeontx2: Add Octeon TX2 CN9130 CRB support
Marcin Wojtas (1):
phy: marvell: cp110: remove unused definitions
Omri Itach (1):
phy: marvell: cp110: initialize only enabled UTMI units
Pali Rohár (1):
arm: a37xx: pci: Fix processing PIO transfers
Stefan Roese (1):
arm: octeontx2: cn9130-crb.dtsi: Disable eth2 for now
jinghua (1):
phy: marvell: add comphy type PHY_TYPE_USB3
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/armada-3720-db.dts | 8 +-
arch/arm/dts/armada-3720-espressobin.dts | 12 +-
arch/arm/dts/armada-3720-turris-mox.dts | 12 +-
arch/arm/dts/armada-3720-uDPU.dts | 23 +-
arch/arm/dts/armada-7040-db-nand.dts | 97 +--
arch/arm/dts/armada-7040-db.dts | 104 ++--
arch/arm/dts/armada-7040.dtsi | 91 +--
arch/arm/dts/armada-8020.dtsi | 56 --
arch/arm/dts/armada-8040-clearfog-gt-8k.dts | 104 ++--
arch/arm/dts/armada-8040-db.dts | 125 ++--
arch/arm/dts/armada-8040-mcbin.dts | 91 +--
arch/arm/dts/armada-8040-puzzle-m801.dts | 126 ++--
arch/arm/dts/armada-8040.dtsi | 116 ++--
arch/arm/dts/armada-8k.dtsi | 18 +
arch/arm/dts/armada-ap806-quad.dtsi | 82 ---
arch/arm/dts/armada-ap806.dtsi | 281 +--------
arch/arm/dts/armada-ap807.dtsi | 40 ++
arch/arm/dts/armada-ap80x-quad.dtsi | 52 ++
arch/arm/dts/armada-ap80x.dtsi | 211 +++++++
arch/arm/dts/armada-common.dtsi | 30 +
arch/arm/dts/armada-cp110-slave.dtsi | 368 ------------
...{armada-cp110-master.dtsi => armada-cp110.dtsi} | 315 +++++-----
arch/arm/dts/cn9130-crb-A.dts | 57 ++
arch/arm/dts/cn9130-crb-B.dts | 61 ++
arch/arm/dts/cn9130-crb.dtsi | 257 ++++++++
arch/arm/dts/cn9130.dtsi | 73 +++
arch/arm/mach-mvebu/Kconfig | 10 +
board/CZ.NIC/turris_mox/turris_mox.c | 8 +-
board/Marvell/octeontx2_cn913x/MAINTAINERS | 5 +
board/Marvell/octeontx2_cn913x/Makefile | 8 +
board/Marvell/octeontx2_cn913x/board.c | 45 ++
cmd/mvebu/Kconfig | 9 +-
cmd/mvebu/Makefile | 2 +-
cmd/mvebu/bubt.c | 2 +-
cmd/mvebu/rx_training.c | 57 ++
configs/mvebu_crb_cn9130_defconfig | 84 +++
configs/mvebu_db-88f3720_defconfig | 2 +-
configs/mvebu_db_armada8k_defconfig | 3 +-
doc/device-tree-bindings/phy/mvebu_comphy.txt | 68 +++
drivers/pci/pci-aardvark.c | 42 +-
drivers/phy/marvell/comphy_a3700.c | 70 +--
drivers/phy/marvell/comphy_a3700.h | 1 -
drivers/phy/marvell/comphy_core.c | 81 ++-
drivers/phy/marvell/comphy_core.h | 67 +--
drivers/phy/marvell/comphy_cp110.c | 621
+++++--------------
drivers/phy/marvell/comphy_hpipe.h | 660
---------------------
drivers/phy/marvell/comphy_mux.c | 11 +-
drivers/phy/marvell/utmi_phy.h | 24 +-
drivers/power/regulator/regulator-uclass.c | 38 ++
include/dt-bindings/comphy/comphy_data.h | 80 ++-
include/mvebu/comphy.h | 2 +-
include/power/regulator.h | 23 +
53 files changed, 2081 insertions(+), 2756 deletions(-)
delete mode 100644 arch/arm/dts/armada-8020.dtsi
create mode 100644 arch/arm/dts/armada-8k.dtsi
delete mode 100644 arch/arm/dts/armada-ap806-quad.dtsi
create mode 100644 arch/arm/dts/armada-ap807.dtsi
create mode 100644 arch/arm/dts/armada-ap80x-quad.dtsi
create mode 100644 arch/arm/dts/armada-ap80x.dtsi
create mode 100644 arch/arm/dts/armada-common.dtsi
delete mode 100644 arch/arm/dts/armada-cp110-slave.dtsi
rename arch/arm/dts/{armada-cp110-master.dtsi => armada-cp110.dtsi} (51%)
create mode 100644 arch/arm/dts/cn9130-crb-A.dts
create mode 100644 arch/arm/dts/cn9130-crb-B.dts
create mode 100644 arch/arm/dts/cn9130-crb.dtsi
create mode 100644 arch/arm/dts/cn9130.dtsi
create mode 100644 board/Marvell/octeontx2_cn913x/MAINTAINERS
create mode 100644 board/Marvell/octeontx2_cn913x/Makefile
create mode 100644 board/Marvell/octeontx2_cn913x/board.c
create mode 100644 cmd/mvebu/rx_training.c
create mode 100644 configs/mvebu_crb_cn9130_defconfig
create mode 100644 doc/device-tree-bindings/phy/mvebu_comphy.txt
delete mode 100644 drivers/phy/marvell/comphy_hpipe.h
More information about the U-Boot
mailing list