[PATCH] atcspi200: Add timeout mechanism in spi_xfer()
Leo Liang
ycliang at andestech.com
Thu Apr 8 04:57:07 CEST 2021
On Thu, Apr 01, 2021 at 04:48:51PM +0800, Dylan Dai-Rong Jhong(??????) wrote:
> Adding timeout mechanism to avoid spi driver from stucking
> in the while loop in __atcspi200_spi_xfer().
>
> Signed-off-by: Dylan Jhong <dylan at andestech.com>
> ---
> drivers/spi/atcspi200_spi.c | 10 ++++++++--
> 1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/spi/atcspi200_spi.c b/drivers/spi/atcspi200_spi.c
> index 634cd56561..775b9ffc25 100644
> --- a/drivers/spi/atcspi200_spi.c
> +++ b/drivers/spi/atcspi200_spi.c
> @@ -201,7 +201,7 @@ static int __atcspi200_spi_xfer(struct nds_spi_slave *ns,
> size_t cmd_len = ns->cmd_len;
> unsigned long data_len = bitlen / 8;
> int rf_cnt;
> - int ret = 0;
> + int ret = 0, timeout = 0;
>
> max_tran_len = ns->max_transfer_length;
> switch (flags) {
> @@ -243,11 +243,12 @@ static int __atcspi200_spi_xfer(struct nds_spi_slave *ns,
> ns->tran_len = tran_len;
> num_blks = DIV_ROUND_UP(tran_len , CHUNK_SIZE);
> num_bytes = (tran_len) % CHUNK_SIZE;
> + timeout = SPI_TIMEOUT;
> if(num_bytes == 0)
> num_bytes = CHUNK_SIZE;
> __atcspi200_spi_start(ns);
>
> - while (num_blks) {
> + while (num_blks && (timeout--)) {
> event = in_le32(&ns->regs->status);
> if ((event & TXEPTY) && (data_out)) {
> __nspi_espi_tx(ns, dout);
> @@ -269,6 +270,11 @@ static int __atcspi200_spi_xfer(struct nds_spi_slave *ns,
> din = (unsigned char *)din + rx_bytes;
> }
> }
> +
> + if (!timeout) {
> + debug("spi_xfer: %s() timeout\n", __func__);
> + break;
> + }
> }
>
> data_len -= tran_len;
> --
> 2.17.0
>
Reviewed-by: Leo Yu-Chi Liang <ycliang at andestech.com>
More information about the U-Boot
mailing list