[PATCH v1 00/23] phy: marvell: Sync Armada 3k/7k/8k SERDES code with Marvell version
Stefan Roese
sr at denx.de
Thu Apr 29 08:46:36 CEST 2021
On 24.03.21 15:06, Stefan Roese wrote:
>
> This patchset adds the missing SERDES patches from the Marvell U-Boot
> SDK U-Boot version. This is done in preparation for the integration
> of the Octeon TX2 CN913x support, which uses the updated version of
> this code.
>
> Thanks,
> Stefan
>
>
> Christine Gharzuzi (1):
> phy: marvell: fix handling of unconnected comphy
>
> Grzegorz Jaszczyk (8):
> phy: marvell: cp110: let the firmware configure comphy for RXAUI
> phy: marvell: cp110: let the firmware configure comphy for USB
> phy: marvell: cp110: let the firmware perform training for XFI
> phy: marvell: cp110: remove both phy and pipe selector configuration
> phy: marvell: cp110: clean up driver after it was moved to atf
> phy: marvell: allow to initialize up to 6 USB ports
> phy: marvell: fix pll initialization for second utmi port
> phy: marvell: utmi: update utmi config which fixes usb2.0 instability
>
> Igal Liberman (11):
> phy: marvell: rename comphy related definitions to COMPHY_XX
> phy: marvell: add missing speed during info prints
> phy: marvell: cp110: utmi: update analog parameters according to
> latest ETP
> phy: marvell: fix several minor bugs in comphy_probe
> phy: marvell: save comphy_map_data priv structure
> phy: marvell: add RX training command
> phy: marvell: enable comphy info prints for all devices
> phy: marvell: pass sgmii id to firmware
> phy: marvell: cp110: mark u-boot power-off calls
> phy: marvell: add support for SFI1
> doc: dt-bindings: add Marvell comphy binding
>
> Marcin Wojtas (1):
> phy: marvell: cp110: remove unused definitions
>
> Omri Itach (1):
> phy: marvell: cp110: initialize only enabled UTMI units
>
> jinghua (1):
> phy: marvell: add comphy type PHY_TYPE_USB3
>
> arch/arm/dts/armada-3720-db.dts | 8 +-
> arch/arm/dts/armada-3720-espressobin.dts | 12 +-
> arch/arm/dts/armada-3720-turris-mox.dts | 12 +-
> arch/arm/dts/armada-3720-uDPU.dts | 23 +-
> arch/arm/dts/armada-7040-db-nand.dts | 24 +-
> arch/arm/dts/armada-7040-db.dts | 23 +-
> arch/arm/dts/armada-8040-clearfog-gt-8k.dts | 32 +-
> arch/arm/dts/armada-8040-db.dts | 24 +-
> arch/arm/dts/armada-8040-mcbin.dts | 27 +-
> arch/arm/dts/armada-8040-puzzle-m801.dts | 32 +-
> arch/arm/dts/armada-cp110.dtsi | 36 +-
> arch/arm/dts/cn9130-crb-A.dts | 16 +-
> arch/arm/dts/cn9130-crb-B.dts | 16 +-
> board/CZ.NIC/turris_mox/turris_mox.c | 8 +-
> cmd/mvebu/Kconfig | 7 +
> cmd/mvebu/Makefile | 2 +-
> cmd/mvebu/rx_training.c | 57 ++
> configs/mvebu_db_armada8k_defconfig | 1 +
> doc/device-tree-bindings/phy/mvebu_comphy.txt | 68 ++
> drivers/phy/marvell/comphy_a3700.c | 70 +-
> drivers/phy/marvell/comphy_a3700.h | 1 -
> drivers/phy/marvell/comphy_core.c | 81 ++-
> drivers/phy/marvell/comphy_core.h | 67 +-
> drivers/phy/marvell/comphy_cp110.c | 621 ++++------------
> drivers/phy/marvell/comphy_hpipe.h | 660 ------------------
> drivers/phy/marvell/comphy_mux.c | 11 +-
> drivers/phy/marvell/utmi_phy.h | 24 +-
> include/dt-bindings/comphy/comphy_data.h | 80 +--
> include/mvebu/comphy.h | 2 +-
> 29 files changed, 591 insertions(+), 1454 deletions(-)
> create mode 100644 cmd/mvebu/rx_training.c
> create mode 100644 doc/device-tree-bindings/phy/mvebu_comphy.txt
> delete mode 100644 drivers/phy/marvell/comphy_hpipe.h
>
Applied to u-boot-marvell/master
Thanks,
Stefan
More information about the U-Boot
mailing list