[PATCH 2/2] drivers: mmc: add OpenPiton MMC support
Tianrui Wei
tianrui-wei at outlook.com
Tue Apr 20 07:17:07 CEST 2021
>From b8736bf498afc0d250228b0c29f1b402d0d58361 Mon Sep 17 00:00:00 2001
From: Tianrui Wei <tianrui-wei at outlook.com>
Date: Mon, 20 April 2021 13:03:25 +0800
Subject: [PATCH 2/2] drivers: mmc: add OpenPiton MMC support
This patch enables support for OpenPiton MMC in u-boot
Signed-off-by: Tianrui Wei <tianrui-wei at outlook.com>
Acked-by: Jonathan Balkind <jbalkind at ucsb.edu>
---
drivers/mmc/Kconfig | 5 +
drivers/mmc/Makefile | 1 +
drivers/mmc/piton_mmc.c | 184 ++++++++++++++++++++++++
3 files changed, 190 insertions(+)
create mode 100644 drivers/mmc/piton_mmc.c
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 14d79139..8cbcd082 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -707,6 +707,11 @@ config MMC_SUNXI_HAS_MODE_SWITCH
bool
depends on MMC_SUNXI
+config MMC_PITON
+ bool "MMC support for openpiton SoC"
+ help
+ This driver enables sd card support in uboot port for openpiton
+
config GENERIC_ATMEL_MCI
bool "Atmel Multimedia Card Interface support"
depends on DM_MMC && BLK && ARCH_AT91
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 1c849cba..698dfe05 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_MMC_SDHCI_XENON) += xenon_sdhci.o
obj-$(CONFIG_MMC_SDHCI_ZYNQ) += zynq_sdhci.o
obj-$(CONFIG_MMC_SUNXI) += sunxi_mmc.o
+obj-$(CONFIG_MMC_PITON) += piton_mmc.o
obj-$(CONFIG_MMC_UNIPHIER) += tmio-common.o uniphier-sd.o
obj-$(CONFIG_RENESAS_SDHI) += tmio-common.o renesas-sdhi.o
obj-$(CONFIG_MMC_BCM2835) += bcm2835_sdhost.o
diff --git a/drivers/mmc/piton_mmc.c b/drivers/mmc/piton_mmc.c
new file mode 100644
index 00000000..a749f30a
--- /dev/null
+++ b/drivers/mmc/piton_mmc.c
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2009 SAMSUNG Electronics
+ * Minkyu Kang <mk7.kang at samsung.com>
+ * Jaehoon Chung <jh80.chung at samsung.com>
+ * Portions Copyright 2011-2019 NVIDIA Corporation
+ * Portions Copyright 2021 Tianrui Wei
+ * Tianrui Wei <tianrui-wei at outlook.com>
+ */
+
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <linux/bitops.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <log.h>
+#include <div64.h>
+#include <mmc.h>
+
+struct piton_mmc_plat {
+ struct mmc_config cfg;
+ struct mmc mmc;
+};
+
+struct piton_mmc_priv {
+ u64 piton_mmc_base_addr; /* peripheral id */
+};
+
+// see mmc_read_blocks to see how it is used.
+// start block is hidden at cmd->arg
+// also, initialize the block size at init
+static int piton_mmc_send_cmd(
+ struct udevice *dev,
+ struct mmc_cmd *cmd,
+ struct mmc_data *data
+)
+{
+ // check first if this is a pure command
+ if (data == NULL) {
+ return 0;
+ }
+
+ // byte count counts all the bytes required for this command
+ u64 byte_cnt = data->blocks * data->blocksize;
+ // get which block in mmc card to start from
+ u64 start_block = cmd->cmdarg;
+ // buff points to the address we store the data stored at mmc card
+ unsigned *buff = (unsigned int *) data->dest;
+
+ struct piton_mmc_priv *priv = dev_get_priv(dev);
+ // start address denotes the absolute address where the transmission start
+ u64 start_addr = priv->piton_mmc_base_addr + (start_block);
+
+ /* if data is not empty*/
+ if (data) {
+
+ /* if there is a read */
+ if (data->flags & MMC_DATA_READ) {
+ for (u64 i = 0; i < byte_cnt; i += 4) {
+ *(buff) = readl((void *)(start_addr + i));
+ buff++;
+ }
+ } else {
+ /* else there is a write
+ * we don't handle write, so error right away
+ */
+ return -ENODEV;
+ }
+ }
+
+ return 0;
+}
+
+static int piton_mmc_ofdata_to_platdata(struct udevice *dev)
+{
+ struct piton_mmc_priv *priv = dev_get_priv(dev);
+ struct piton_mmc_plat *plat = dev_get_platdata(dev);
+ struct mmc_config *cfg;
+ struct mmc *mmc;
+
+ priv->piton_mmc_base_addr = dev_read_addr(dev);
+ cfg = &plat->cfg;
+ cfg->name = "PITON MMC";
+ cfg->host_caps = MMC_MODE_8BIT;
+ cfg->f_max = 100000;
+ cfg->f_min = 400000;
+ cfg->voltages = MMC_VDD_21_22;
+
+ mmc = &plat->mmc;
+ mmc->read_bl_len = MMC_MAX_BLOCK_LEN;
+ mmc->capacity_user = 0x100000000;
+ mmc->capacity_user *= mmc->read_bl_len;
+ mmc->capacity_boot = 0;
+ mmc->capacity_rpmb = 0;
+ for (int i = 0; i < 4; i++)
+ mmc->capacity_gp[i] = 0;
+ mmc->capacity = 0x2000000000ULL;
+ mmc->has_init = 1;
+
+ /* fill in device description */
+ struct blk_desc *bdesc;
+
+ bdesc = mmc_get_blk_desc(mmc);
+ bdesc->lun = 0;
+ bdesc->hwpart = 0;
+ bdesc->type = 0;
+ bdesc->blksz = mmc->read_bl_len;
+ bdesc->log2blksz = LOG2(bdesc->blksz);
+ bdesc->lba = lldiv(mmc->capacity, mmc->read_bl_len);
+
+ return 0;
+}
+
+/*
+ * currently, this is ignored. we only use fixed speed
+ */
+static int piton_mmc_set_ios(struct udevice *dev) { return 0; }
+
+/* test if piton has the micro mmc card present
+ * always return 1, which means present
+ */
+static int piton_mmc_getcd(struct udevice *dev) { return 1; }
+
+/* dummy function, piton_mmc don't need initialization in hw*/
+static int piton_mmc_init(struct udevice *dev) { return 0; }
+
+static const struct dm_mmc_ops piton_mmc_ops = {
+ // send a command to mmc device
+ .send_cmd = piton_mmc_send_cmd,
+ // set iospeed
+ .set_ios = piton_mmc_set_ios,
+ // detect if card is present
+ .get_cd = piton_mmc_getcd,
+};
+
+static int piton_mmc_probe(struct udevice *dev)
+{
+ struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+ struct piton_mmc_plat *plat = dev_get_platdata(dev);
+ struct mmc_config *cfg = &plat->cfg;
+
+ cfg->name = dev->name;
+ upriv->mmc = &plat->mmc;
+ upriv->mmc->has_init = 1;
+ upriv->mmc->capacity = 0x2000000000ULL;
+ upriv->mmc->read_bl_len = MMC_MAX_BLOCK_LEN;
+
+ return piton_mmc_init(dev);
+}
+
+static int piton_mmc_bind(struct udevice *dev)
+{
+ struct piton_mmc_plat *plat = dev_get_platdata(dev);
+ struct mmc_config *cfg = &plat->cfg;
+
+ cfg->name = dev->name;
+ cfg->host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_8BIT;
+ cfg->voltages = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34;
+ cfg->f_min = 1000000;
+ cfg->f_max = 52000000;
+ cfg->b_max = U32_MAX;
+
+ return mmc_bind(dev, &plat->mmc, cfg);
+}
+
+static const struct udevice_id piton_mmc_ids[] = {
+ {.compatible = "openpiton,piton-mmc"}, {}
+};
+
+U_BOOT_DRIVER(piton_mmc_drv) = {
+ .name = "piton_mmc",
+ .id = UCLASS_MMC,
+ .of_match = piton_mmc_ids,
+ .ofdata_to_platdata = piton_mmc_ofdata_to_platdata,
+ .bind = piton_mmc_bind,
+ .probe = piton_mmc_probe,
+ .ops = &piton_mmc_ops,
+ .platdata_auto_alloc_size = sizeof(struct piton_mmc_plat),
+ .priv_auto_alloc_size = sizeof(struct piton_mmc_priv),
+};
--
2.17.1
More information about the U-Boot
mailing list