[Uboot-stm32] [PATCH] dfu: dfu_mtd: set max_buf_size to erasesize also for NOR devices

Patrice CHOTARD patrice.chotard at foss.st.com
Tue Apr 20 12:24:57 CEST 2021


Hi Patrick

On 3/4/21 5:47 PM, Patrick Delaunay wrote:
> For NOR devices the logical DFU buffer size is the sector_size,
> as it is done in dfu_sf.c or in spi/sf_mtd.c
> (sf_mtd_info.erasesize = flash->sector_size)
> 
> For NAND the DFU size was already limited to erasesize as
> has_pages = true.
> 
> So the mtd dfu backend can use this erasesize for all the MTD devices,
> NOR and NAND with dfu->max_buf_size = mtd->erasesize
> 
> This difference was initially copied from MTD command, where
> data is fully available in RAM without size limitation.
> 
> This patch avoids to have many sector write in dfu_mtd.c at the end
> of the DFU transfer and avoids issues with USB timeout or WATCHDOG.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
> 
>  drivers/dfu/dfu_mtd.c | 5 +----
>  1 file changed, 1 insertion(+), 4 deletions(-)
> 
> diff --git a/drivers/dfu/dfu_mtd.c b/drivers/dfu/dfu_mtd.c
> index ca67585a7e..7efb3cbd79 100644
> --- a/drivers/dfu/dfu_mtd.c
> +++ b/drivers/dfu/dfu_mtd.c
> @@ -252,7 +252,6 @@ int dfu_fill_entity_mtd(struct dfu_entity *dfu, char *devstr, char *s)
>  {
>  	char *st;
>  	struct mtd_info *mtd;
> -	bool has_pages;
>  	int ret, part;
>  
>  	mtd = get_mtd_device_nm(devstr);
> @@ -262,9 +261,7 @@ int dfu_fill_entity_mtd(struct dfu_entity *dfu, char *devstr, char *s)
>  
>  	dfu->dev_type = DFU_DEV_MTD;
>  	dfu->data.mtd.info = mtd;
> -
> -	has_pages = mtd->type == MTD_NANDFLASH || mtd->type == MTD_MLCNANDFLASH;
> -	dfu->max_buf_size = has_pages ? mtd->erasesize : 0;
> +	dfu->max_buf_size = mtd->erasesize;
>  
>  	st = strsep(&s, " ");
>  	if (!strcmp(st, "raw")) {
> 

Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>

Thanks

Patrice


More information about the U-Boot mailing list