[Uboot-stm32] [PATCH 1/2] cmd: pinmux: update result of do_status
Patrice CHOTARD
patrice.chotard at st.com
Tue Apr 20 12:21:10 CEST 2021
Hi Patrick
-----Original Message-----
From: Uboot-stm32 <uboot-stm32-bounces at st-md-mailman.stormreply.com> On Behalf Of Patrick DELAUNAY
Sent: mercredi 28 octobre 2020 11:07
To: u-boot at lists.denx.de
Cc: U-Boot STM32 <uboot-stm32 at st-md-mailman.stormreply.com>; Simon Glass <sjg at chromium.org>; Patrick DELAUNAY <patrick.delaunay at st.com>; Sean Anderson <seanga2 at gmail.com>
Subject: [Uboot-stm32] [PATCH 1/2] cmd: pinmux: update result of do_status
Update the result of do_status and alway returns a CMD_RET_ value (-ENOSYS was a possible result of show_pinmux).
This patch also adds pincontrol name in error messages (dev->name) and treats correctly the status sub command when pin-controller device is not selected.
Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---
cmd/pinmux.c | 44 +++++++++++++++++++-----------------
test/py/tests/test_pinmux.py | 4 ++--
2 files changed, 25 insertions(+), 23 deletions(-)
diff --git a/cmd/pinmux.c b/cmd/pinmux.c index 9942b15419..af04c95a46 100644
--- a/cmd/pinmux.c
+++ b/cmd/pinmux.c
@@ -41,7 +41,7 @@ static int do_dev(struct cmd_tbl *cmdtp, int flag, int argc,
return CMD_RET_SUCCESS;
}
-static int show_pinmux(struct udevice *dev)
+static void show_pinmux(struct udevice *dev)
{
char pin_name[PINNAME_SIZE];
char pin_mux[PINMUX_SIZE];
@@ -51,54 +51,56 @@ static int show_pinmux(struct udevice *dev)
pins_count = pinctrl_get_pins_count(dev);
- if (pins_count == -ENOSYS) {
- printf("Ops get_pins_count not supported\n");
- return pins_count;
+ if (pins_count < 0) {
+ printf("Ops get_pins_count not supported by %s\n", dev->name);
+ return;
}
for (i = 0; i < pins_count; i++) {
ret = pinctrl_get_pin_name(dev, i, pin_name, PINNAME_SIZE);
- if (ret == -ENOSYS) {
- printf("Ops get_pin_name not supported\n");
- return ret;
+ if (ret) {
+ printf("Ops get_pin_name error (%d) by %s\n",
+ ret, dev->name);
+ return;
}
ret = pinctrl_get_pin_muxing(dev, i, pin_mux, PINMUX_SIZE);
if (ret) {
- printf("Ops get_pin_muxing error (%d)\n", ret);
- return ret;
+ printf("Ops get_pin_muxing error (%d) by %s in %s\n",
+ ret, pin_name, dev->name);
+ return;
}
printf("%-*s: %-*s\n", PINNAME_SIZE, pin_name,
PINMUX_SIZE, pin_mux);
}
-
- return 0;
}
static int do_status(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])
{
struct udevice *dev;
- int ret = CMD_RET_USAGE;
- if (currdev && (argc < 2 || strcmp(argv[1], "-a")))
- return show_pinmux(currdev);
+ if (argc < 2) {
+ if (!currdev) {
+ printf("pin-controller device not selected\n");
+ return CMD_RET_FAILURE;
+ }
+ show_pinmux(currdev);
+ return CMD_RET_SUCCESS;
+ }
- if (argc < 2 || strcmp(argv[1], "-a"))
- return ret;
+ if (strcmp(argv[1], "-a"))
+ return CMD_RET_USAGE;
uclass_foreach_dev_probe(UCLASS_PINCTRL, dev) {
/* insert a separator between each pin-controller display */
printf("--------------------------\n");
printf("%s:\n", dev->name);
- ret = show_pinmux(dev);
- if (ret < 0)
- printf("Can't display pin muxing for %s\n",
- dev->name);
+ show_pinmux(dev);
}
- return ret;
+ return CMD_RET_SUCCESS;
}
static int do_list(struct cmd_tbl *cmdtp, int flag, int argc, diff --git a/test/py/tests/test_pinmux.py b/test/py/tests/test_pinmux.py index 0cbbae000c..b3ae2ab024 100644
--- a/test/py/tests/test_pinmux.py
+++ b/test/py/tests/test_pinmux.py
@@ -13,9 +13,9 @@ def test_pinmux_usage_1(u_boot_console):
@pytest.mark.buildconfigspec('cmd_pinmux')
def test_pinmux_usage_2(u_boot_console):
"""Test that 'pinmux status' executed without previous "pinmux dev"
- command displays pinmux usage."""
+ command displays error message."""
output = u_boot_console.run_command('pinmux status')
- assert 'Usage:' in output
+ assert 'pin-controller device not selected' in output
@pytest.mark.buildconfigspec('cmd_pinmux')
@pytest.mark.boardspec('sandbox')
Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
Thanks
Patrice
--
2.17.1
_______________________________________________
Uboot-stm32 mailing list
Uboot-stm32 at st-md-mailman.stormreply.com
https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32
More information about the U-Boot
mailing list