[PATCH 2/2] stm32mp: replace printf by log macro in setup_boot_mode

[Patrice CHOTARD]

Hi Patrick

On 4/6/21 9:27 AM, Patrick Delaunay wrote:
> Replace the remaining printf in setup_boot_mode() by log macro
> to handle filtering for log features.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
> 
>  arch/arm/mach-stm32mp/cpu.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/cpu.c
> index 2f05c5e91b..621a6b7c89 100644
> --- a/arch/arm/mach-stm32mp/cpu.c
> +++ b/arch/arm/mach-stm32mp/cpu.c
> @@ -502,8 +502,8 @@ static void setup_boot_mode(void)
>  			if (IS_ENABLED(CONFIG_CMD_STM32PROG_SERIAL))
>  				gd->flags &= ~(GD_FLG_SILENT |
>  					       GD_FLG_DISABLE_CONSOLE);
> -			printf("uart%d = %s not found in device tree!\n",
> -			       instance + 1, cmd);
> +			log_err("uart%d = %s not found in device tree!\n",
> +				instance + 1, cmd);
>  			break;
>  		}
>  		sprintf(cmd, "%d", dev_seq(dev));
> @@ -514,7 +514,7 @@ static void setup_boot_mode(void)
>  		if (IS_ENABLED(CONFIG_CMD_STM32PROG_SERIAL) && gd->cur_serial_dev != dev) {
>  			gd->flags &= ~(GD_FLG_SILENT |
>  				       GD_FLG_DISABLE_CONSOLE);
> -			printf("serial boot with console enabled!\n");
> +			log_info("serial boot with console enabled!\n");
>  		}
>  		break;
>  	case BOOT_SERIAL_USB:
> @@ -546,7 +546,7 @@ static void setup_boot_mode(void)
>  
>  	switch (forced_mode) {
>  	case BOOT_FASTBOOT:
> -		printf("Enter fastboot!\n");
> +		log_info("Enter fastboot!\n");
>  		env_set("preboot", "env set preboot; fastboot 0");
>  		break;
>  	case BOOT_STM32PROG:
> @@ -556,7 +556,7 @@ static void setup_boot_mode(void)
>  	case BOOT_UMS_MMC0:
>  	case BOOT_UMS_MMC1:
>  	case BOOT_UMS_MMC2:
> -		printf("Enter UMS!\n");
> +		log_info("Enter UMS!\n");
>  		instance = forced_mode - BOOT_UMS_MMC0;
>  		sprintf(cmd, "env set preboot; ums 0 mmc %d", instance);
>  		env_set("preboot", cmd);
> 
Applied to u-boot-stm/master

Thanks
Patrice