[PATCH 13/37] net: fec_mxc: support i.MX8ULP

[Ramon Fried]

On Mon, Apr 12, 2021 at 2:53 PM Peng Fan (OSS) <peng.fan at oss.nxp.com> wrote:
>
> From: Peng Fan <peng.fan at nxp.com>
>
> Support i.MX8ULP in fec_mxc
>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
>  drivers/net/Kconfig   | 2 +-
>  drivers/net/fec_mxc.c | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index cf062fad4d..a443b499ba 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -314,7 +314,7 @@ config FEC_MXC_MDIO_BASE
>
>  config FEC_MXC
>         bool "FEC Ethernet controller"
> -       depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || VF610
> +       depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || IMX8ULP || VF610
>         help
>           This driver supports the 10/100 Fast Ethernet controller for
>           NXP i.MX processors.
> diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
> index ec21157d71..57ba856915 100644
> --- a/drivers/net/fec_mxc.c
> +++ b/drivers/net/fec_mxc.c
> @@ -628,7 +628,7 @@ static int fec_init(struct eth_device *dev, struct bd_info *bd)
>         writel(0x00000000, &fec->eth->gaddr2);
>
>         /* Do not access reserved register */
> -       if (!is_mx6ul() && !is_mx6ull() && !is_imx8() && !is_imx8m()) {
> +       if (!is_mx6ul() && !is_mx6ull() && !is_imx8() && !is_imx8m() && !is_imx8ulp()) {
>                 /* clear MIB RAM */
>                 for (i = mib_ptr; i <= mib_ptr + 0xfc; i += 4)
>                         writel(0, i);
> --
> 2.30.0
>
Reviewed-by: Ramon Fried <rfried.dev at gmail.com>