[PATCH] sunxi: clock: H6/H616: Fix PLL6 clock calculation

Andre Przywara andre.przywara at arm.com
Wed Apr 28 12:05:55 CEST 2021


The "n" factor of the PLL_PERIPH0 clock is using the usual +1 encoding,
so we need to adjust the register value before doing the calculation.

This fixes the MMC clock setup on those SoCs, which could be slightly off
due to the wrong parent frequency:
mmc 2 set mod-clk req 52000000 parent 1176000000 n 2 m 12 rate 49000000

Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
 arch/arm/mach-sunxi/clock_sun50i_h6.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-sunxi/clock_sun50i_h6.c b/arch/arm/mach-sunxi/clock_sun50i_h6.c
index 492fc4a3fca..a947463e0a5 100644
--- a/arch/arm/mach-sunxi/clock_sun50i_h6.c
+++ b/arch/arm/mach-sunxi/clock_sun50i_h6.c
@@ -94,7 +94,7 @@ unsigned int clock_get_pll6(void)
 	int m = IS_ENABLED(CONFIG_MACH_SUN50I_H6) ? 4 : 2;
 
 	uint32_t rval = readl(&ccm->pll6_cfg);
-	int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT);
+	int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT) + 1;
 	int div1 = ((rval & CCM_PLL6_CTRL_DIV1_MASK) >>
 			CCM_PLL6_CTRL_DIV1_SHIFT) + 1;
 	int div2 = ((rval & CCM_PLL6_CTRL_DIV2_MASK) >>
-- 
2.17.5



More information about the U-Boot mailing list