[PATCH v2 08/16] x86: Do cache set-up by default when booting from coreboot
Simon Glass
sjg at chromium.org
Sat Apr 24 06:56:18 CEST 2021
A recent change to disable cache setup when booting from coreboot
assumed that this has been done by SPL. The result is that for the
coreboot board, the cache is disabled (in start.S) and never
re-enabled.
If the cache was turned off, as it is on boards without SPL, we should
turn it back on. Add this new condition.
Signed-off-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
---
Changes in v2:
- Add a comment about the cases
arch/x86/lib/init_helpers.c | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/arch/x86/lib/init_helpers.c b/arch/x86/lib/init_helpers.c
index 67401b9ba79..f33194045f9 100644
--- a/arch/x86/lib/init_helpers.c
+++ b/arch/x86/lib/init_helpers.c
@@ -18,10 +18,20 @@ int init_cache_f_r(void)
IS_ENABLED(CONFIG_FSP_VERSION2);
int ret;
- if (!ll_boot_init())
- return 0;
-
- do_mtrr &= !IS_ENABLED(CONFIG_FSP_VERSION1) &&
+ /*
+ * Supported configurations:
+ *
+ * booting from slimbootloader - in that case the MTRRs are already set
+ * up
+ * booting with FSPv1 - MTRRs are already set up
+ * booting with FSPv2 - MTRRs must be set here
+ * booting from coreboot - in this case there is no SPL, so we set up
+ * the MTRRs here
+ * Note: if there is an SPL, then it has already set up MTRRs so we
+ * don't need to do that here
+ */
+ do_mtrr &= !IS_ENABLED(CONFIG_SPL) &&
+ !IS_ENABLED(CONFIG_FSP_VERSION1) &&
!IS_ENABLED(CONFIG_SYS_SLIMBOOTLOADER);
if (do_mtrr) {
--
2.31.1.498.g6c1eba8ee3d-goog
More information about the U-Boot
mailing list