[PATCH 2/5] ARM: board: warp: Enable OF_CONTROL and DM gpio/pin control

[Peter Robinson]

Enable OF_CONTROL and DM for gpio and pin control support
on the i.MX6SL based Warp.

Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
Cc: Otavio Salvador <otavio at ossystems.com.br>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
---
 configs/warp_defconfig | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/configs/warp_defconfig b/configs/warp_defconfig
index 34acc9e6c8..68ad71c27c 100644
--- a/configs/warp_defconfig
+++ b/configs/warp_defconfig
@@ -2,10 +2,12 @@ CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_SYS_TEXT_BASE=0x87800000
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="imx6sl-warp"
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x60000
 CONFIG_MX6SL=y
 CONFIG_TARGET_WARP=y
+CONFIG_OF_CONTROL=y
 # CONFIG_CMD_BMODE is not set
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/warp/imximage.cfg"
@@ -18,6 +20,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PART=y
+# CONFIG_CMD_PINMUX is not set
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_SETEXPR is not set
@@ -32,9 +35,13 @@ CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 # CONFIG_NET is not set
 CONFIG_BOUNCE_BUFFER=y
+CONFIG_DM=y
+CONFIG_DM_GPIO=y
 CONFIG_DFU_MMC=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_USDHC=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
 CONFIG_MXC_UART=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
-- 
2.31.1