[PATCH 1/5] ARM: board: warp: Import dts files
Peter Robinson
pbrobinson at gmail.com
Fri Apr 2 20:05:48 CEST 2021
Import the i.MX6 based Warp dts files from Linux 5.12-rc1.
Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
---
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/imx6sl-warp.dts | 234 +++++++++++++++++++++++++++++++++++
2 files changed, 237 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/imx6sl-warp.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 116f75192f..1481a6ec46 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -734,7 +734,9 @@ dtb-y += \
endif
-dtb-$(CONFIG_MX6SL) += imx6sl-evk.dtb
+dtb-$(CONFIG_MX6SL) += \
+ imx6sl-evk.dtb \
+ imx6sl-warp.dtb
dtb-$(CONFIG_MX6SLL) += imx6sll-evk.dtb
diff --git a/arch/arm/dts/imx6sl-warp.dts b/arch/arm/dts/imx6sl-warp.dts
new file mode 100644
index 0000000000..9d7c888489
--- /dev/null
+++ b/arch/arm/dts/imx6sl-warp.dts
@@ -0,0 +1,234 @@
+/*
+ * Copyright 2014, 2015 O.S. Systems Software LTDA.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+
+/ {
+ model = "Revotics WaRP Board";
+ compatible = "revotics,imx6sl-warp", "fsl,imx6sl";
+
+ memory at 80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ usdhc3_pwrseq: usdhc3_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
+ <&gpio4 7 GPIO_ACTIVE_LOW>, /* WL_HOSTWAKE */
+ <&gpio3 25 GPIO_ACTIVE_LOW>, /* BT_REG_ON */
+ <&gpio3 27 GPIO_ACTIVE_LOW>, /* BT_HOSTWAKE */
+ <&gpio4 4 GPIO_ACTIVE_LOW>, /* BT_WAKE */
+ <&gpio4 6 GPIO_ACTIVE_LOW>; /* BT_RST_N */
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "peripheral";
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <4>;
+ non-removable;
+ keep-power-in-suspend;
+ wakeup-source;
+ mmc-pwrseq = <&usdhc3_pwrseq>;
+ status = "okay";
+};
+
+&iomuxc {
+ imx6sl-warp {
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x41b0b1
+ MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x41b0b1
+ >;
+ };
+
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6SL_PAD_AUD_RXC__UART3_RX_DATA 0x41b0b1
+ MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x41b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA 0x41b0b1
+ MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA 0x41b0b1
+ MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B 0x4130b1
+ MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B 0x4130b1
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x417059
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x410059
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x417059
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x417059
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x417059
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x417059
+ MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x417059
+ MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x417059
+ MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x417059
+ MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x417059
+ MX6SL_PAD_SD2_RST__SD2_RESET 0x417059
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170b9
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100b9
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170b9
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170b9
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170b9
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170b9
+ MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170b9
+ MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170b9
+ MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170b9
+ MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170b9
+ MX6SL_PAD_SD2_RST__SD2_RESET 0x4170b9
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170f9
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100f9
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170f9
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170f9
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170f9
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170f9
+ MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170f9
+ MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170f9
+ MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170f9
+ MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170f9
+ MX6SL_PAD_SD2_RST__SD2_RESET 0x4170f9
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x417059
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x410059
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x417059
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x417059
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x417059
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x417059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170b9
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100b9
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x4170b9
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x4170b9
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x4170b9
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x4170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170f9
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100f9
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x4170f9
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x4170f9
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x4170f9
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x4170f9
+ >;
+ };
+ };
+};
--
2.31.1
More information about the U-Boot
mailing list