[PATCH 11/37] arm: imx: move container Kconfig under mach-imx
Peng Fan (OSS)
peng.fan at oss.nxp.com
Mon Apr 12 14:12:40 CEST 2021
From: Peng Fan <peng.fan at nxp.com>
Since i.MX8 and i.MX8ULP reuse common container, so move the Kconfig
public to both.
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
arch/arm/mach-imx/Kconfig | 13 +++++++++++++
arch/arm/mach-imx/imx8/Kconfig | 13 -------------
2 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index c089664375..653463ab46 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -172,3 +172,16 @@ config IMX_DCD_ADDR
the ROM code to configure the device at early boot stage, is located.
This information is shared with the user via mkimage -l just so the
image can be signed.
+
+config SPL_LOAD_IMX_CONTAINER
+ bool "Enable SPL loading U-Boot as a i.MX Container image"
+ depends on SPL
+ help
+ This is to let SPL could load i.MX Container image
+
+config IMX_CONTAINER_CFG
+ string "i.MX Container config file"
+ depends on SPL
+ help
+ This is to specific the cfg file for generating container
+ image which will be loaded by SPL.
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index 4e76612d05..4ad9ca8191 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -31,19 +31,6 @@ config IMX8QXP
config SYS_SOC
default "imx8"
-config SPL_LOAD_IMX_CONTAINER
- bool "Enable SPL loading U-Boot as a i.MX Container image"
- depends on SPL
- help
- This is to let SPL could load i.MX8 Container image
-
-config IMX_CONTAINER_CFG
- string "i.MX Container config file"
- depends on SPL
- help
- This is to specific the cfg file for generating container
- image which will be loaded by SPL.
-
config BOOTAUX_RESERVED_MEM_BASE
hex "i.MX auxiliary core dram memory base"
default 0
--
2.30.0
More information about the U-Boot
mailing list