[PATCH v2 00/13] arm64: synquacer: Add SynQuacer/DeveloperBox support
Masami Hiramatsu
masami.hiramatsu at linaro.org
Sat Apr 17 01:37:08 CEST 2021
Hello,
Here is the 2nd version of the series (including some fixes for build
errors) to add SynQuacer/DeveloperBox 96board EE suport on U-Boot.
Because of my poor typo, the previous version was not sent to the
ML. Anyway I have fixed it.
This series includes not only DeveloperBox support but also some fixes
for the issues which I faced while porting U-Boot on the DeveloperBox.
First 3 patches are fixes, next 1 patch is a code cleanup for generic
gpio for arm. The next 7 patches adding DeveloperBox devices
and board support. The last 2 patches are related to the UEFI capsule
update.
Changes in v2
-------------
Previous [1/13] was re-sent to the ML by Tim Harvey, so I dropped it.
So this series needs the following patch.
https://lists.denx.de/pipermail/u-boot/2021-April/447519.html
And I had some comments on the v1 patch, so I updated:
[10/13]
- Add reference commit id of original EDK2 to the comment
- Just copy the EDK2 dts files as-is (change #include path)
- Split out the u-boot specific changes in -u-boot.dtsi.
- Removed unneeded spi-nor flash partition information.
[11/13]
- Do not include arch/gpio.h and remove arch-sc2a11/gpio.h.
- Remove non-UEFI boot commands.
- Use Distro boot.
- Remove NOR-connected SPI node by path instead of alias.
- Rename configs/SynQuacer_defconfig to
configs/synquacer_developerbox_defconfig.
- Rename include/configs/SynQuacer.h to include/configs/synquacer.h.
- Move README under doc/board/socionext/ and make it .rst text.
DeveloperBox
============
DeveloperBox is a certified 96boards Enterprise Edition board. The board/SoC has: -
* Socionext SC2A11 24-cores ARM Cortex-A53 on tbe Mini-ATX form factor motherboard
* 4 DIMM slots (4GB DDR4-2400 UDIMM shipped by default)
* 1 4xPCIe Gen2 slot and 2 1xPCIe Gen2 slots
(1x slots are connected via PCIe bridge chip)
* 4 USB-3.0 ports
* 2 SATA ports
* 1 GbE network port
* 1 USB-UART serial port (micro USB)
* 64MB SPI NOR Flash
* 8GB eMMC Flash Storage
* 96boards LS connector
The DeveloperBox schematic can be found here: -
https://www.96boards.org/documentation/enterprise/developerbox/hardware-docs/mzsc2am_v03_20180115_a.pdf
And the other documents can be found here: -
https://www.96boards.org/documentation/enterprise/developerbox/
Currently, the U-Boot port supports: -
* USB
* eMMC
* SPI-NOR
* SATA
* GbE
The DeveloperBox boots the TF-A and EDK2 as a main bootloader by default.
The DeveloperBox U-Boot port will replace the EDK2 and boot from TF-A as
BL33, but no need to combine with it.
Thank you,
---
Jassi Brar (4):
mtd: spi-nor-ids: add support for Macronix mx25u51245g and mx66u1g45g flash
mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driver
spi: synquacer: Add HSSPI SPI controller driver for SynQuacer
net: synquacer: Add netsec driver
Masami Hiramatsu (9):
ata: ahci-pci: Use scsi_ops to initialize ops
dm: pci: Skip setting VGA bridge bits if parent device is the host bus
efi: Fix to use null handle to create new handle for efi_fmp_raw
gpio: Introduce CONFIG_ONLY_GENERIC_GPIO to cleanup #ifdefs
pci: synquacer: Add SynQuacer ECAM based PCIe driver
ARM: dts: synquacer: Add device trees for DeveloperBox
board: synquacer: Add DeveloperBox 96boards EE support
doc: qemu: arm64: Fix the documentation of capsule update
configs: synquacer: Enable EFI capsule update support
arch/arm/Kconfig | 32 +
arch/arm/dts/Makefile | 2
arch/arm/dts/synquacer-sc2a11-caches.dtsi | 73 +
.../dts/synquacer-sc2a11-developerbox-u-boot.dtsi | 57 +
arch/arm/dts/synquacer-sc2a11-developerbox.dts | 56 +
arch/arm/dts/synquacer-sc2a11.dtsi | 595 ++++++++++
arch/arm/include/asm/gpio.h | 8
board/cortina/common/Kconfig | 1
board/socionext/developerbox/Kconfig | 36 +
board/socionext/developerbox/MAINTAINERS | 13
board/socionext/developerbox/Makefile | 9
board/socionext/developerbox/developerbox.c | 145 +++
configs/synquacer_developerbox_defconfig | 108 ++
doc/board/emulation/qemu_capsule_update.rst | 11
doc/board/index.rst | 1
doc/board/socionext/developerbox.rst | 87 ++
doc/board/socionext/index.rst | 9
drivers/ata/ahci-pci.c | 2
drivers/mmc/Kconfig | 10
drivers/mmc/Makefile | 1
drivers/mmc/f_sdh30.c | 81 +
drivers/mmc/sdhci.c | 9
drivers/mtd/spi/spi-nor-ids.c | 2
drivers/net/Kconfig | 8
drivers/net/Makefile | 1
drivers/net/sni_netsec.c | 1134 ++++++++++++++++++++
drivers/pci/Kconfig | 12
drivers/pci/Makefile | 1
drivers/pci/pci-uclass.c | 3
drivers/pci/pcie_ecam_synquacer.c | 600 +++++++++++
drivers/spi/Kconfig | 8
drivers/spi/Makefile | 1
drivers/spi/spi-synquacer.c | 491 +++++++++
include/configs/synquacer.h | 112 ++
lib/efi_loader/efi_capsule.c | 2
35 files changed, 3704 insertions(+), 17 deletions(-)
create mode 100644 arch/arm/dts/synquacer-sc2a11-caches.dtsi
create mode 100644 arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi
create mode 100644 arch/arm/dts/synquacer-sc2a11-developerbox.dts
create mode 100644 arch/arm/dts/synquacer-sc2a11.dtsi
create mode 100644 board/socionext/developerbox/Kconfig
create mode 100644 board/socionext/developerbox/MAINTAINERS
create mode 100644 board/socionext/developerbox/Makefile
create mode 100644 board/socionext/developerbox/developerbox.c
create mode 100644 configs/synquacer_developerbox_defconfig
create mode 100644 doc/board/socionext/developerbox.rst
create mode 100644 doc/board/socionext/index.rst
create mode 100644 drivers/mmc/f_sdh30.c
create mode 100644 drivers/net/sni_netsec.c
create mode 100644 drivers/pci/pcie_ecam_synquacer.c
create mode 100644 drivers/spi/spi-synquacer.c
create mode 100644 include/configs/synquacer.h
--
Masami Hiramatsu <masami.hiramatsu at linaro.org>
More information about the U-Boot
mailing list