[NXP-IMX] please pull nxp-imx-2021-4-6

Peng Fan peng.fan at nxp.com
Wed Apr 7 07:27:55 CEST 2021


> Subject: [NXP-IMX] please pull nxp-imx-2021-4-6

Please ignore this PR, I'll resend a v2 PR

Thanks,
Peng.

> 
> Hi Stefano,
> 
> Please pull nxp-imx-2021-4-6. This PR is based on Tom's master branch. If you
> need me rebase on imx/master, I could redo this PR. This is quite a large PR,
> since lots stuff in downstream tree.
> 
> I ran local buildman test for all boards, no issue found.
> ------------------------------------------
> convert to use binman for i.MX8MN/M/P EVK board i.MX8M caam/dek
> support hab update/fix for i.MX8M/7ULP env/distro cleanup for i.MX8M
> i.MX8M ddr script/driver update
> ------------------------------------------
> 
> Thanks,
> Peng.
> 
> The following changes since commit
> 90eba245a66aa20589404ba537215faf2012c1a3:
> 
>   Merge branch 'next' (2021-04-05 11:29:57 -0400)
> 
> are available in the Git repository at:
> 
>   https://github.com/MrVan/u-boot.git tags/nxp-imx-2021-4-6
> 
> for you to fetch changes up to
> 95dfcc086b419aece6835fd7aaad704de661e246:
> 
>   doc: imx8mp-evk: update after using binman (2021-04-06 17:19:45 +0800)
> 
> ----------------------------------------------------------------
> Aymen Sghaier (6):
>       crypto: caam: Add CAAM support to i.MX8M platforms
>       crypto: caam: Fix build warnings pointer casting
>       crypto: Add blob command support for i.MX8M platforms
>       crypto: caam: Fix pointer size to 32bit for i.MX8M
>       crypto: caam: Add secure memory vid 3 support
>       crypto: caam: RNG4 TRNG errata
> 
> Breno Lima (13):
>       imx: imx7 Support for Manufacturing Protection
>       imx: Avoid hardcoded output ring size register offset (ORSR)
>       imx: Ensure CAAM clock is enabled prior getting out_jr_size
>       imx: Avoid hardcoded Job Ring Max size
>       imx: hab: Enable hab.c to authenticate additional images in open
> configuration
>       imx: hab: Check if IVT header is HABv4
>       mx7ulp: hab: Add hab_status command for HABv4 M4 boot
>       imx: hab: Fix build warnings in 32-bit targets
>       crypto: fsl: blob: Flush dcache range for destination address
>       mx6dq: hab: Fix chip version in hab.h code
>       cmd: blob: Add IMX_HAB and CAAM supported SoCs as dependency
>       cmd: blob: Instantiate RNG before running CMD_BLOB
>       fsl_mfgprot: Fix typo in sign_mppubk()
> 
> Clement Faure (2):
>       imx8m: Add DEK blob encapsulation for imx8m
>       imx8: Add DEK blob encapsulation
> 
> Clement Le Marquis (1):
>       imx: caam: new u-boot command to set PRIBLOB bitfield from CAAM
> SCFGR register to 0x3
> 
> Franck LENORMAND (3):
>       crypto: caam: change JR running loop
>       caam: enable support for iMX7ULP
>       imx7ulp: Enable support for cmd blob
> 
> Jacky Bai (1):
>       imx8mn: Update the DDR4 timing script on imx8mn ddr4 evk
> 
> Peng Fan (21):
>       tools: imx image: fix write warning
>       imx8mm/p: remove boot.cmd
>       imx8mm_evk: add/cleanup variable for distro
>       imx8mp_evk: add/cleanup variable for distro
>       imx8mp_evk: spl: clean up including headers
>       imx8mp_evk: Increase VDD_ARM to 0.95v Overdrive voltage
>       power: pca9450: add a new parameter for power_pca9450_init
>       imx8mn_evk: drop duplicated code
>       imx8mn: Add LPDDR4 EVK board support
>       imx: logos: use NXP logo
>       imx8m: soc: update fuse path
>       arch: mach-imx: imx8m: fix unique_id read error for imx8mp
>       imx: HAB: Update hab codes to support ARM64 and i.MX8M
>       imx8m: add regs used by CAAM
>       imx8mm_evk: switch to use binman to pack images
>       doc: imx8mm_evk: update doc after using binman
>       imx8mn-ddr4-evk: switch to use binman
>       imx8mn-evk: switch to use binman
>       doc: imx8mn_evk: update doc after using binman
>       imx8mp-evk: switch to use binman
>       doc: imx8mp-evk: update after using binman
> 
> Sherry Sun (1):
>       imx8mp: ddr: Add inline ECC feature support
> 
> Utkarsh Gupta (2):
>       imx: HAB: Validate IVT before authenticating image
>       imx: hab: Display All HAB events via hab_status command
> 
> Ye Li (18):
>       imx8mm_evk: Update to latest LPDDR4 script
>       imx8mm_evk: Switch to new imx8mm evk board
>       imx8mp_evk: Update LPDDR4 timing for new FW 202006
>       imx8mp_evk: Update LPDDR4 refresh time
>       imx8mn: Add low drive mode support for DDR4/LPDDR4 EVK
>       imx8mn: Add support for 11x11 UltraLite part number
>       imx8m: Update thermal and PMU kernel nodes for dual/single cores
>       imx8m: ddr: Disable CA VREF Training for LPDDR4
>       iMX8MQ: Recognize the B2 revision
>       misc: ocotp: Update OCOTP driver for iMX8MQ B2
>       imx8mq_evk: Applying default LPDDR4 script for B2
>       imx: hab: Add function to authenticate kernel image
>       hab: Change calling to ROM API failsafe
>       imx: HAB: Add support for iMX8MM
>       iMX8M: Add support to enable CONFIG_IMX_HAB
>       imx: cmd_dek: Enable DEK only for chips supporting CAAM
>       crypto: caam: Add fsl caam driver
>       crypto: fsl: refactor for 32 bit version CAAM support on ARM64
> 
> haidong.zheng (1):
>       imx8mp: refine power on imx8mp board
> 
>  arch/arm/Kconfig                                   |    6 +
>  arch/arm/dts/Makefile                              |    1 +
>  arch/arm/dts/imx8mm-evk-u-boot.dtsi                |  117
> ++++++++-
>  arch/arm/dts/imx8mm-evk.dtsi                       |  127
> +++++-----
>  arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi           |  115
> +++++++++
>  arch/arm/dts/imx8mn-evk-u-boot.dtsi                |  128
> ++++++++++
>  arch/arm/dts/imx8mn-evk.dts                        |  128
> ++++++++++
>  arch/arm/dts/imx8mp-evk-u-boot.dtsi                |  112
> +++++++++
>  arch/arm/include/asm/arch-imx/cpu.h                |   13 +-
>  arch/arm/include/asm/arch-imx8/image.h             |   11 +
>  arch/arm/include/asm/arch-imx8m/clock.h            |    1 +
>  arch/arm/include/asm/arch-imx8m/imx-regs.h         |   21 ++
>  arch/arm/include/asm/arch-mx7/crm_regs.h           |    8 +
>  arch/arm/include/asm/arch-mx7ulp/imx-regs.h        |   12 +
>  arch/arm/include/asm/mach-imx/hab.h                |   37 ++-
>  arch/arm/include/asm/mach-imx/sys_proto.h          |    6 +-
>  arch/arm/mach-imx/Kconfig                          |   44 +++-
>  arch/arm/mach-imx/Makefile                         |    3 +
>  arch/arm/mach-imx/cmd_dek.c                        |  262
> ++++++++++++++++++--
>  arch/arm/mach-imx/cmd_mfgprot.c                    |  150
> ++++++++++++
>  arch/arm/mach-imx/cpu.c                            |    8 +-
>  arch/arm/mach-imx/hab.c                            |  417
> ++++++++++++++++++++++++++++----
>  arch/arm/mach-imx/imx8/Kconfig                     |    1 +
>  arch/arm/mach-imx/imx8m/Kconfig                    |   11 +
>  arch/arm/mach-imx/imx8m/clock_imx8mm.c             |    8 +
>  arch/arm/mach-imx/imx8m/clock_imx8mq.c             |    7 +
>  arch/arm/mach-imx/imx8m/soc.c                      |  183
> ++++++++++++--
>  arch/arm/mach-imx/mx7ulp/Kconfig                   |    1 +
>  arch/arm/mach-imx/priblob.c                        |   33 +++
>  board/freescale/imx8mm_evk/boot.cmd                |   35 ---
>  board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg |    9 +
>  board/freescale/imx8mm_evk/lpddr4_timing.c         |  692
> +++++++++++++++++++++-------------------------------
>  board/freescale/imx8mm_evk/spl.c                   |   33 +--
>  board/freescale/imx8mn_evk/Kconfig                 |    6 +-
>  board/freescale/imx8mn_evk/Makefile                |    6 +
>  board/freescale/imx8mn_evk/ddr4_timing.c           | 1057
> ++++++++++++++++++++++++++++++++++------------------------------------------
> ----
>  board/freescale/imx8mn_evk/ddr4_timing_ld.c        | 1057
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++++++++
>  board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg   |   10 +
>  board/freescale/imx8mn_evk/lpddr4_timing.c         | 1587
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  board/freescale/imx8mn_evk/lpddr4_timing_ld.c      | 1440
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++++++++++++++++++++++++++++++++++++
>  board/freescale/imx8mn_evk/spl.c                   |   50 +++-
>  board/freescale/imx8mp_evk/boot.cmd                |   25 --
>  board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg |   10 +
>  board/freescale/imx8mp_evk/lpddr4_timing.c         |  372
> +++++++++++++++++++++-------
>  board/freescale/imx8mp_evk/spl.c                   |   38 +--
>  board/freescale/imx8mq_evk/spl.c                   |    2 +-
>  board/phytec/phycore_imx8mp/spl.c                  |    2 +-
>  cmd/Kconfig                                        |    8 +
>  cmd/Makefile                                       |    1 +
>  cmd/blob.c                                         |   16 ++
>  cmd/cmd_fsl_caam.c                                 |   88
> +++++++
>  configs/imx8mm_evk_defconfig                       |    6 +-
>  configs/imx8mn_ddr4_evk_defconfig                  |    4 +-
>  configs/imx8mn_evk_defconfig                       |   93 +++++++
>  configs/imx8mp_evk_defconfig                       |    4 +-
>  doc/board/freescale/imx8mm_evk.rst                 |    3 +-
>  doc/board/freescale/imx8mn_evk.rst                 |    3 +-
>  doc/board/freescale/imx8mp_evk.rst                 |   11 +-
>  doc/imx/habv4/guides/mx6_mx7_secure_boot.txt       |   25 ++
>  drivers/crypto/Makefile                            |    1 +
>  drivers/crypto/fsl/Kconfig                         |    6 +
>  drivers/crypto/fsl/Makefile                        |    4 +-
>  drivers/crypto/fsl/desc.h                          |   49 ++--
>  drivers/crypto/fsl/desc_constr.h                   |   28 +--
>  drivers/crypto/fsl/fsl_blob.c                      |    6 +
>  drivers/crypto/fsl/fsl_hash.c                      |    6 +-
>  drivers/crypto/fsl/fsl_mfgprot.c                   |  160
> ++++++++++++
>  drivers/crypto/fsl/jobdesc.c                       |   16 +-
>  drivers/crypto/fsl/jr.c                            |   53 ++--
>  drivers/crypto/fsl/jr.h                            |   11 +-
>  drivers/crypto/fsl/type.h                          |   16 ++
>  drivers/crypto/fsl_caam.c                          |  720
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  drivers/crypto/fsl_caam_internal.h                 |  230
> ++++++++++++++++++
>  drivers/ddr/imx/imx8m/Kconfig                      |    8 +
>  drivers/misc/mxc_ocotp.c                           |    2 +-
>  drivers/power/pmic/pmic_pca9450.c                  |    4 +-
>  include/configs/imx8mm_evk.h                       |    8 +-
>  include/configs/imx8mp_evk.h                       |    8 +-
>  include/fsl_caam.h                                 |   24 ++
>  include/fsl_sec.h                                  |   54 +++--
>  include/power/pca9450.h                            |    2 +-
>  tools/imx8image.c                                  |    2 +-
>  tools/imx8mimage.c                                 |    2 +-
>  tools/logos/freescale.bmp                          |  Bin 46738 ->
> 47670 bytes
>  84 files changed, 8600 insertions(+), 1484 deletions(-)  create mode 100644
> arch/arm/dts/imx8mn-evk-u-boot.dtsi
>  create mode 100644 arch/arm/dts/imx8mn-evk.dts  create mode 100644
> arch/arm/mach-imx/cmd_mfgprot.c  create mode 100644
> arch/arm/mach-imx/priblob.c  delete mode 100644
> board/freescale/imx8mm_evk/boot.cmd
>  create mode 100644
> board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg
>  create mode 100644 board/freescale/imx8mn_evk/ddr4_timing_ld.c
>  create mode 100644 board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg
>  create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing.c
>  create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing_ld.c
>  delete mode 100644 board/freescale/imx8mp_evk/boot.cmd
>  create mode 100644
> board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg
>  mode change 100644 => 100755
> board/freescale/imx8mp_evk/lpddr4_timing.c
>  create mode 100644 cmd/cmd_fsl_caam.c
>  create mode 100644 configs/imx8mn_evk_defconfig  create mode 100644
> drivers/crypto/fsl/fsl_mfgprot.c  create mode 100644
> drivers/crypto/fsl/type.h  create mode 100644 drivers/crypto/fsl_caam.c
> create mode 100644 drivers/crypto/fsl_caam_internal.h
>  create mode 100644 include/fsl_caam.h


More information about the U-Boot mailing list