[PATCH v2 5/6] net: dwc_eth_qos: use generic ethernet phy for stm32 variant
Ramon Fried
rfried.dev at gmail.com
Thu Apr 29 22:13:15 CEST 2021
On Mon, Apr 26, 2021 at 6:47 PM Patrick Delaunay
<patrick.delaunay at foss.st.com> wrote:
>
> Use the generic ethernet phy which already manages the correct binding
> for gpio reset, including the assert an deassert delays.
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
>
> Changes in v2:
> - use generic ethernet phy for stm32 variant, this patch is a REWORK of
> previous serie: the device parsing is done in eth-phy driver and the gpio
> support is removed in stm32 variant: eqos_start/stop_resets_stm32 and
> eqos_probe_resources_stm32.
>
> drivers/net/Kconfig | 1 +
> drivers/net/dwc_eth_qos.c | 50 ---------------------------------------
> 2 files changed, 1 insertion(+), 50 deletions(-)
>
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index 382639044b..adf43fb42a 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -206,6 +206,7 @@ config DWC_ETH_QOS_IMX
> config DWC_ETH_QOS_STM32
> bool "Synopsys DWC Ethernet QOS device support for STM32"
> depends on DWC_ETH_QOS
> + select DM_ETH_PHY
> default y if ARCH_STM32MP
> help
> The Synopsys Designware Ethernet QOS IP block with the specific
> diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c
> index e625aea8d1..3fb8bfaf3a 100644
> --- a/drivers/net/dwc_eth_qos.c
> +++ b/drivers/net/dwc_eth_qos.c
> @@ -700,29 +700,6 @@ static int eqos_start_resets_tegra186(struct udevice *dev)
>
> static int eqos_start_resets_stm32(struct udevice *dev)
> {
> - struct eqos_priv *eqos = dev_get_priv(dev);
> - int ret;
> -
> - debug("%s(dev=%p):\n", __func__, dev);
> - if (dm_gpio_is_valid(&eqos->phy_reset_gpio)) {
> - ret = dm_gpio_set_value(&eqos->phy_reset_gpio, 1);
> - if (ret < 0) {
> - pr_err("dm_gpio_set_value(phy_reset, assert) failed: %d",
> - ret);
> - return ret;
> - }
> -
> - udelay(2);
> -
> - ret = dm_gpio_set_value(&eqos->phy_reset_gpio, 0);
> - if (ret < 0) {
> - pr_err("dm_gpio_set_value(phy_reset, deassert) failed: %d",
> - ret);
> - return ret;
> - }
> - }
> - debug("%s: OK\n", __func__);
> -
> return 0;
> }
>
> @@ -743,18 +720,6 @@ static int eqos_stop_resets_tegra186(struct udevice *dev)
>
> static int eqos_stop_resets_stm32(struct udevice *dev)
> {
> - struct eqos_priv *eqos = dev_get_priv(dev);
> - int ret;
> -
> - if (dm_gpio_is_valid(&eqos->phy_reset_gpio)) {
> - ret = dm_gpio_set_value(&eqos->phy_reset_gpio, 1);
> - if (ret < 0) {
> - pr_err("dm_gpio_set_value(phy_reset, assert) failed: %d",
> - ret);
> - return ret;
> - }
> - }
> -
> return 0;
> }
>
> @@ -1785,7 +1750,6 @@ static int eqos_probe_resources_stm32(struct udevice *dev)
> struct eqos_priv *eqos = dev_get_priv(dev);
> int ret;
> phy_interface_t interface;
> - struct ofnode_phandle_args phandle_args;
>
> debug("%s(dev=%p):\n", __func__, dev);
>
> @@ -1825,20 +1789,6 @@ static int eqos_probe_resources_stm32(struct udevice *dev)
> if (ret)
> pr_warn("No phy clock provided %d", ret);
>
> - ret = dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0,
> - &phandle_args);
> - if (!ret) {
> - /* search "reset-gpios" in phy node */
> - ret = gpio_request_by_name_nodev(phandle_args.node,
> - "reset-gpios", 0,
> - &eqos->phy_reset_gpio,
> - GPIOD_IS_OUT |
> - GPIOD_IS_OUT_ACTIVE);
> - if (ret)
> - pr_warn("gpio_request_by_name(phy reset) not provided %d",
> - ret);
> - }
> -
> debug("%s: OK\n", __func__);
> return 0;
>
> --
> 2.17.1
>
Reviewed-by: Ramon Fried <rfried.dev at gmail.com>
More information about the U-Boot
mailing list