[PATCH v2] ARM: dts: at91: sama5d3: add u-boot properties to sama5d3 pit timer

Eugen.Hristev at microchip.com Eugen.Hristev at microchip.com
Wed Apr 7 08:32:31 CEST 2021


On 4/7/21 1:16 AM, Derald Woods wrote:
> On Tue, Apr 6, 2021 at 4:40 AM Manuel Reis <mluis.reis at gmail.com 
> <mailto:mluis.reis at gmail.com>> wrote:
> 
>     in the early SPL boot stage whenever there is a call to udelay,
>     dm_timer_init fails to find the pit timer whenever it traverses
>     the device tree, if this property is not present
> 
>     Signed-off-by: Manuel Reis <mluis.reis at gmail.com
>     <mailto:mluis.reis at gmail.com>>
>     CC: Eugen Hristev <eugen.hristev at microchip.com
>     <mailto:eugen.hristev at microchip.com>>
>     ---
>       arch/arm/dts/sama5d3.dtsi | 1 +
>       1 file changed, 1 insertion(+)
> 
>     diff --git a/arch/arm/dts/sama5d3.dtsi b/arch/arm/dts/sama5d3.dtsi
>     index 6ed218eaad..42c30e9f30 100644
>     --- a/arch/arm/dts/sama5d3.dtsi
>     +++ b/arch/arm/dts/sama5d3.dtsi
>     @@ -1320,6 +1320,7 @@
>                                      reg = <0xfffffe30 0xf>;
>                                      interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
>                                      clocks = <&mck>;
>     +                               u-boot,dm-pre-reloc;
>                              };
> 
>                              watchdog at fffffe40 {
>     -- 
>     2.27.0
> 
> 
> This patch, on top of v2021.04, allows my SAMA5D3 Xplained board to boot 
> normally again.
> 
> Tested-by: Derald D. Woods <woods.technical at gmail.com 
> <mailto:woods.technical at gmail.com>>
> 

Hi Derald,

Could I ask, you are using the SPL to boot your board ?
Did you have to remove any udelay from the ddr2_init code , or it booted 
out of the box by applying this patch only ?

Thanks,
Eugen


More information about the U-Boot mailing list