[PATCH 2/3] usb: ehci-mx6: add IMX8MM OTG support

Tim Harvey tharvey at gateworks.com
Tue Apr 27 19:08:56 CEST 2021


Add support for determining host vs peripheral mode for IMX8MM
configured as OTG.

Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
 drivers/usb/host/ehci-mx6.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index c2dfe49012..d055d2b1fe 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -523,7 +523,7 @@ static int ehci_usb_phy_mode(struct udevice *dev)
 			plat->init_type = USB_INIT_DEVICE;
 		else
 			plat->init_type = USB_INIT_HOST;
-	} else if (is_mx7()) {
+	} else if (is_mx7() || is_imx8mm()) {
 		phy_status = (void __iomem *)(addr +
 					      USBNC_PHY_STATUS_OFFSET);
 		val = readl(phy_status);
-- 
2.17.1



More information about the U-Boot mailing list