[PATCH v7 00/14] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t

[Takahiro Kuwano]

On 4/27/2021 7:14 PM, Jagan Teki wrote:
> On Tue, Apr 27, 2021 at 7:54 AM <tkuw584924 at gmail.com> wrote:
>>
>> From: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>
>>
>> The S25HL-T/S25HS-T family is the Cypress Semper Flash with Quad SPI.
>>
>> The summary datasheets can be found in the following links.
>> https://www.cypress.com/file/424146/download (256Mb/512Mb/1Gb, single die)
>> https://www.cypress.com/file/499246/download (2Gb/4Gb, dual/quad die)
>>
>> The full version can be found in the following links (registration
>> required).
>> https://community.cypress.com/t5/Semper-Flash-Access-Program/Datasheet-Semper-Flash-with-Quad-SPI/ta-p/260789?attachment-id=19522
>> https://community.cypress.com/t5/Semper-Flash-Access-Program/Datasheet-2Gb-MCP-Semper-Flash-with-Quad-SPI/ta-p/260823?attachment-id=29503
>>
>> Tested on Xilinx Zynq-7000 FPGA board.
>>
>> Changes since v7:
>>   - Fixed return type of s25hx_t_erase_non_uniform() to 'int'
> 
> If you have core changes that indeed affect most, better to send them
> only if they are fine with all builds.
> 
> https://source.denx.de/u-boot/custodians/u-boot-spi/-/pipelines/7323
> 
> Jagan.
> 
The problem is caused by a wrong #ifdef directive usage.
I will fix it, check with all builds, then submit again.

Best Regards,
Takahiro