[PATCH] arm: allwinner: r40: update R40 DT files from linux 5.12-rc1
Ivan Uvarov
i.uvarov at cognitivepilot.com
Mon Apr 19 11:30:57 CEST 2021
Update R40 .dts{,i} and dt-binding headers to current version from kernel.
Files taken from Linux 5.12-rc1 release
(commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8)
Signed-off-by: Ivan Uvarov <i.uvarov at cognitivepilot.com>
---
arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts | 23 +-
arch/arm/dts/sun8i-r40.dtsi | 375 ++++++++++++++++--
arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts | 12 +-
include/dt-bindings/clock/sun8i-r40-ccu.h | 6 +-
.../interrupt-controller/arm-gic.h | 5 +-
include/dt-bindings/thermal/thermal.h | 3 +-
6 files changed, 375 insertions(+), 49 deletions(-)
diff --git a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
index c488aaacbd..a6a1087a0c 100644
--- a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -129,7 +129,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_dc1sw>;
status = "okay";
};
@@ -164,6 +164,10 @@
#include "axp22x.dtsi"
+&ir0 {
+ status = "okay";
+};
+
&mmc0 {
vmmc-supply = <®_dcdc1>;
bus-width = <4>;
@@ -201,10 +205,15 @@
&pio {
pinctrl-names = "default";
pinctrl-0 = <&clk_out_a_pin>;
+ vcc-pa-supply = <®_aldo2>;
+ vcc-pc-supply = <®_dcdc1>;
+ vcc-pd-supply = <®_dcdc1>;
+ vcc-pe-supply = <®_eldo1>;
+ vcc-pf-supply = <®_dcdc1>;
+ vcc-pg-supply = <®_dldo1>;
};
®_aldo2 {
- regulator-always-on;
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-name = "vcc-pa";
@@ -218,16 +227,16 @@
};
®_dc1sw {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-name = "vcc-gmac-phy";
};
®_dcdc1 {
regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcc-3v0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
};
®_dcdc2 {
diff --git a/arch/arm/dts/sun8i-r40.dtsi b/arch/arm/dts/sun8i-r40.dtsi
index 06b685869f..d5ad3b9efd 100644
--- a/arch/arm/dts/sun8i-r40.dtsi
+++ b/arch/arm/dts/sun8i-r40.dtsi
@@ -44,8 +44,10 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/clock/sun8i-tcon-top.h>
#include <dt-bindings/reset/sun8i-r40-ccu.h>
#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
#address-cells = <1>;
@@ -78,25 +80,25 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu at 0 {
+ cpu0: cpu at 0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
};
- cpu at 1 {
+ cpu1: cpu at 1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
};
- cpu at 2 {
+ cpu2: cpu at 2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
};
- cpu at 3 {
+ cpu3: cpu at 3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
@@ -109,6 +111,22 @@
status = "disabled";
};
+ thermal-zones {
+ cpu_thermal: cpu0-thermal {
+ /* milliseconds */
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 0>;
+ };
+
+ gpu_thermal: gpu-thermal {
+ /* milliseconds */
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 1>;
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -118,11 +136,11 @@
display_clocks: clock at 1000000 {
compatible = "allwinner,sun8i-r40-de2-clk",
"allwinner,sun8i-h3-de2-clk";
- reg = <0x01000000 0x100000>;
- clocks = <&ccu CLK_DE>,
- <&ccu CLK_BUS_DE>;
- clock-names = "mod",
- "bus";
+ reg = <0x01000000 0x10000>;
+ clocks = <&ccu CLK_BUS_DE>,
+ <&ccu CLK_DE>;
+ clock-names = "bus",
+ "mod";
resets = <&ccu RST_BUS_DE>;
#clock-cells = <1>;
#reset-cells = <1>;
@@ -172,6 +190,48 @@
};
};
+ deinterlace: deinterlace at 1400000 {
+ compatible = "allwinner,sun8i-r40-deinterlace",
+ "allwinner,sun8i-h3-deinterlace";
+ reg = <0x01400000 0x20000>;
+ clocks = <&ccu CLK_BUS_DEINTERLACE>,
+ <&ccu CLK_DEINTERLACE>,
+ /*
+ * NOTE: Contrary to what datasheet claims,
+ * DRAM deinterlace gate doesn't exist and
+ * it's shared with CSI1.
+ */
+ <&ccu CLK_DRAM_CSI1>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_DEINTERLACE>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&mbus 9>;
+ interconnect-names = "dma-mem";
+ };
+
+ syscon: system-control at 1c00000 {
+ compatible = "allwinner,sun8i-r40-system-control",
+ "allwinner,sun4i-a10-system-control";
+ reg = <0x01c00000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram_c: sram at 1d00000 {
+ compatible = "mmio-sram";
+ reg = <0x01d00000 0xd0000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x01d00000 0xd0000>;
+
+ ve_sram: sram-section at 0 {
+ compatible = "allwinner,sun8i-r40-sram-c1",
+ "allwinner,sun4i-a10-sram-c1";
+ reg = <0x000000 0x80000>;
+ };
+ };
+ };
+
nmi_intc: interrupt-controller at 1c00030 {
compatible = "allwinner,sun7i-a20-sc-nmi";
interrupt-controller;
@@ -180,6 +240,69 @@
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
+ dma: dma-controller at 1c02000 {
+ compatible = "allwinner,sun8i-r40-dma",
+ "allwinner,sun50i-a64-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMA>;
+ dma-channels = <16>;
+ dma-requests = <31>;
+ resets = <&ccu RST_BUS_DMA>;
+ #dma-cells = <1>;
+ };
+
+ spi0: spi at 1c05000 {
+ compatible = "allwinner,sun8i-r40-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x01c05000 0x1000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_SPI0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi at 1c06000 {
+ compatible = "allwinner,sun8i-r40-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x01c06000 0x1000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_SPI1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ csi0: csi at 1c09000 {
+ compatible = "allwinner,sun8i-r40-csi0",
+ "allwinner,sun7i-a20-csi0";
+ reg = <0x01c09000 0x1000>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CSI0>, <&ccu CLK_CSI_SCLK>,
+ <&ccu CLK_DRAM_CSI0>;
+ clock-names = "bus", "isp", "ram";
+ resets = <&ccu RST_BUS_CSI0>;
+ interconnects = <&mbus 5>;
+ interconnect-names = "dma-mem";
+ status = "disabled";
+ };
+
+ video-codec at 1c0e000 {
+ compatible = "allwinner,sun8i-r40-video-engine";
+ reg = <0x01c0e000 0x1000>;
+ clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_BUS_VE>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ allwinner,sram = <&ve_sram 1>;
+ };
+
mmc0: mmc at 1c0f000 {
compatible = "allwinner,sun8i-r40-mmc",
"allwinner,sun50i-a64-mmc";
@@ -266,6 +389,38 @@
#phy-cells = <1>;
};
+ crypto: crypto at 1c15000 {
+ compatible = "allwinner,sun8i-r40-crypto";
+ reg = <0x01c15000 0x1000>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_CE>;
+ };
+
+ spi2: spi at 1c17000 {
+ compatible = "allwinner,sun8i-r40-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x01c17000 0x1000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_SPI2>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ahci: sata at 1c18000 {
+ compatible = "allwinner,sun8i-r40-ahci";
+ reg = <0x01c18000 0x1000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
+ resets = <&ccu RST_BUS_SATA>;
+ reset-names = "ahci";
+ status = "disabled";
+ };
+
ehci1: usb at 1c19000 {
compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
reg = <0x01c19000 0x100>;
@@ -312,6 +467,19 @@
status = "disabled";
};
+ spi3: spi at 1c1f000 {
+ compatible = "allwinner,sun8i-r40-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x01c1f000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_SPI3>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
ccu: clock at 1c20000 {
compatible = "allwinner,sun8i-r40-ccu";
reg = <0x01c20000 0x400>;
@@ -322,8 +490,7 @@
};
rtc: rtc at 1c20400 {
- compatible = "allwinner,sun8i-r40-rtc",
- "allwinner,sun8i-h3-rtc";
+ compatible = "allwinner,sun8i-r40-rtc";
reg = <0x01c20400 0x400>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clock-output-names = "osc32k", "osc32k-out";
@@ -347,6 +514,20 @@
function = "clk_out_a";
};
+ /omit-if-no-ref/
+ csi0_8bits_pins: csi0-8bits-pins {
+ pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+ "PE6", "PE7", "PE8", "PE9", "PE10",
+ "PE11";
+ function = "csi0";
+ };
+
+ /omit-if-no-ref/
+ csi0_mclk_pin: csi0-mclk-pin {
+ pins = "PE1";
+ function = "csi0";
+ };
+
gmac_rgmii_pins: gmac-rgmii-pins {
pins = "PA0", "PA1", "PA2", "PA3",
"PA4", "PA5", "PA6", "PA7",
@@ -365,6 +546,36 @@
function = "i2c0";
};
+ i2c1_pins: i2c1-pins {
+ pins = "PB18", "PB19";
+ function = "i2c1";
+ };
+
+ i2c2_pins: i2c2-pins {
+ pins = "PB20", "PB21";
+ function = "i2c2";
+ };
+
+ i2c3_pins: i2c3-pins {
+ pins = "PI0", "PI1";
+ function = "i2c3";
+ };
+
+ i2c4_pins: i2c4-pins {
+ pins = "PI2", "PI3";
+ function = "i2c4";
+ };
+
+ ir0_pins: ir0-pins {
+ pins = "PB4";
+ function = "ir0";
+ };
+
+ ir1_pins: ir1-pins {
+ pins = "PB23";
+ function = "ir1";
+ };
+
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
@@ -390,6 +601,36 @@
bias-pull-up;
};
+ /omit-if-no-ref/
+ spi0_pc_pins: spi0-pc-pins {
+ pins = "PC0", "PC1", "PC2";
+ function = "spi0";
+ };
+
+ /omit-if-no-ref/
+ spi0_cs0_pc_pin: spi0-cs0-pc-pin {
+ pins = "PC23";
+ function = "spi0";
+ };
+
+ /omit-if-no-ref/
+ spi1_pi_pins: spi1-pi-pins {
+ pins = "PI17", "PI18", "PI19";
+ function = "spi1";
+ };
+
+ /omit-if-no-ref/
+ spi1_cs0_pi_pin: spi1-cs0-pi-pin {
+ pins = "PI16";
+ function = "spi1";
+ };
+
+ /omit-if-no-ref/
+ spi1_cs1_pi_pin: spi1-cs1-pi-pin {
+ pins = "PI15";
+ function = "spi1";
+ };
+
uart0_pb_pins: uart0-pb-pins {
pins = "PB22", "PB23";
function = "uart0";
@@ -409,6 +650,45 @@
wdt: watchdog at 1c20c90 {
compatible = "allwinner,sun4i-a10-wdt";
reg = <0x01c20c90 0x10>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
+ };
+
+ ir0: ir at 1c21800 {
+ compatible = "allwinner,sun8i-r40-ir",
+ "allwinner,sun6i-a31-ir";
+ reg = <0x01c21800 0x400>;
+ pinctrl-0 = <&ir0_pins>;
+ pinctrl-names = "default";
+ clocks = <&ccu CLK_BUS_IR0>, <&ccu CLK_IR0>;
+ clock-names = "apb", "ir";
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_BUS_IR0>;
+ status = "disabled";
+ };
+
+ ir1: ir at 1c21c00 {
+ compatible = "allwinner,sun8i-r40-ir",
+ "allwinner,sun6i-a31-ir";
+ reg = <0x01c21c00 0x400>;
+ pinctrl-0 = <&ir1_pins>;
+ pinctrl-names = "default";
+ clocks = <&ccu CLK_BUS_IR1>, <&ccu CLK_IR1>;
+ clock-names = "apb", "ir";
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_BUS_IR1>;
+ status = "disabled";
+ };
+
+ ths: thermal-sensor at 1c24c00 {
+ compatible = "allwinner,sun8i-r40-ths";
+ reg = <0x01c24c00 0x100>;
+ clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+ clock-names = "bus", "mod";
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_BUS_THS>;
+ /* TODO: add nvmem-cells for calibration */
+ #thermal-sensor-cells = <1>;
};
uart0: serial at 1c28000 {
@@ -518,6 +798,8 @@
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C1>;
resets = <&ccu RST_BUS_I2C1>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -529,6 +811,8 @@
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C2>;
resets = <&ccu RST_BUS_I2C2>;
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -540,6 +824,8 @@
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C3>;
resets = <&ccu RST_BUS_I2C3>;
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -551,22 +837,33 @@
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C4>;
resets = <&ccu RST_BUS_I2C4>;
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "default";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- ahci: sata at 1c18000 {
- compatible = "allwinner,sun8i-r40-ahci";
- reg = <0x01c18000 0x1000>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
- resets = <&ccu RST_BUS_SATA>;
- resets-name = "ahci";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
+ mali: gpu at 1c40000 {
+ compatible = "allwinner,sun8i-r40-mali", "arm,mali-400";
+ reg = <0x01c40000 0x10000>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1",
+ "pmu";
+ clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+ clock-names = "bus", "core";
+ resets = <&ccu RST_BUS_GPU>;
};
gmac: ethernet at 1c50000 {
@@ -588,6 +885,16 @@
};
};
+ mbus: dram-controller at 1c62000 {
+ compatible = "allwinner,sun8i-r40-mbus";
+ reg = <0x01c62000 0x1000>;
+ clocks = <&ccu 155>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ dma-ranges = <0x00000000 0x40000000 0x80000000>;
+ #interconnect-cells = <1>;
+ };
+
tcon_top: tcon-top at 1c70000 {
compatible = "allwinner,sun8i-r40-tcon-top";
reg = <0x01c70000 0x1000>;
@@ -614,12 +921,9 @@
#size-cells = <0>;
tcon_top_mixer0_in: port at 0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- tcon_top_mixer0_in_mixer0: endpoint at 0 {
- reg = <0>;
+ tcon_top_mixer0_in_mixer0: endpoint {
remote-endpoint = <&mixer0_out_tcon_top>;
};
};
@@ -713,7 +1017,7 @@
compatible = "allwinner,sun8i-r40-tcon-tv";
reg = <0x01c73000 0x1000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>;
+ clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top CLK_TCON_TOP_TV0>;
clock-names = "ahb", "tcon-ch1";
resets = <&ccu RST_BUS_TCON_TV0>;
reset-names = "lcd";
@@ -756,7 +1060,7 @@
compatible = "allwinner,sun8i-r40-tcon-tv";
reg = <0x01c74000 0x1000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>;
+ clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top CLK_TCON_TOP_TV1>;
clock-names = "ahb", "tcon-ch1";
resets = <&ccu RST_BUS_TCON_TV1>;
reset-names = "lcd";
@@ -798,7 +1102,7 @@
gic: interrupt-controller at 1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
- <0x01c82000 0x1000>,
+ <0x01c82000 0x2000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
@@ -818,7 +1122,7 @@
resets = <&ccu RST_BUS_HDMI1>;
reset-names = "ctrl";
phys = <&hdmi_phy>;
- phy-names = "hdmi-phy";
+ phy-names = "phy";
status = "disabled";
ports {
@@ -843,7 +1147,7 @@
compatible = "allwinner,sun8i-r40-hdmi-phy";
reg = <0x01ef0000 0x10000>;
clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
- <&ccu 7>, <&ccu 16>;
+ <&ccu CLK_PLL_VIDEO0>, <&ccu CLK_PLL_VIDEO1>;
clock-names = "bus", "mod", "pll-0", "pll-1";
resets = <&ccu RST_BUS_HDMI0>;
reset-names = "phy";
@@ -851,6 +1155,15 @@
};
};
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
index 15c22b06fc..47954551f5 100644
--- a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -120,7 +120,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_dc1sw>;
status = "okay";
};
@@ -198,16 +198,16 @@
};
®_dc1sw {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-name = "vcc-gmac-phy";
};
®_dcdc1 {
regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcc-3v0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
};
®_dcdc2 {
diff --git a/include/dt-bindings/clock/sun8i-r40-ccu.h b/include/dt-bindings/clock/sun8i-r40-ccu.h
index 4fa5f69fc2..d7337b55a4 100644
--- a/include/dt-bindings/clock/sun8i-r40-ccu.h
+++ b/include/dt-bindings/clock/sun8i-r40-ccu.h
@@ -43,6 +43,10 @@
#ifndef _DT_BINDINGS_CLK_SUN8I_R40_H_
#define _DT_BINDINGS_CLK_SUN8I_R40_H_
+#define CLK_PLL_VIDEO0 7
+
+#define CLK_PLL_VIDEO1 16
+
#define CLK_CPU 24
#define CLK_BUS_MIPI_DSI 29
@@ -172,7 +176,7 @@
#define CLK_AVS 152
#define CLK_HDMI 153
#define CLK_HDMI_SLOW 154
-
+#define CLK_MBUS 155
#define CLK_DSI_DPHY 156
#define CLK_TVE0 157
#define CLK_TVE1 158
diff --git a/include/dt-bindings/interrupt-controller/arm-gic.h b/include/dt-bindings/interrupt-controller/arm-gic.h
index 1ea1b702fe..35b6f69b7d 100644
--- a/include/dt-bindings/interrupt-controller/arm-gic.h
+++ b/include/dt-bindings/interrupt-controller/arm-gic.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
/*
* This header provides constants for the ARM GIC.
*/
@@ -7,14 +8,14 @@
#include <dt-bindings/interrupt-controller/irq.h>
-/* interrupt specific cell 0 */
+/* interrupt specifier cell 0 */
#define GIC_SPI 0
#define GIC_PPI 1
/*
* Interrupt specifier cell 2.
- * The flaggs in irq.h are valid, plus those below.
+ * The flags in irq.h are valid, plus those below.
*/
#define GIC_CPU_MASK_RAW(x) ((x) << 8)
#define GIC_CPU_MASK_SIMPLE(num) GIC_CPU_MASK_RAW((1 << (num)) - 1)
diff --git a/include/dt-bindings/thermal/thermal.h b/include/dt-bindings/thermal/thermal.h
index b5e6b0069a..bc7babb1a6 100644
--- a/include/dt-bindings/thermal/thermal.h
+++ b/include/dt-bindings/thermal/thermal.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* This header provides constants for most thermal bindings.
*
* Copyright (C) 2013 Texas Instruments
* Eduardo Valentin <eduardo.valentin at ti.com>
- *
- * GPLv2 only
*/
#ifndef _DT_BINDINGS_THERMAL_THERMAL_H
--
2.25.1
More information about the U-Boot
mailing list