[PATCH V3 1/2] mmc: add OpenPiton mmc support
Jaehoon Chung
jh80.chung at samsung.com
Tue Apr 27 00:11:30 CEST 2021
Dear Tianrui,
On 4/26/21 12:31 PM, Tianrui Wei wrote:
> This patch adds mmc support for OpenPiton.
> Specifically, some dts bindings were not used because
> our mmc controller doens't have those configuration
> options, it only exposes a dummy mmap interface for
> CPU.
Befere sending patch, how about run checkpatch.pl?
There is checkpatch.pl under scripts directory.
Best Regards,
Jaehoon Chung
>
> Signed-off-by: Tianrui Wei <tianrui-wei at outlook.com>
> Signed-off-by: Jonathan Balkind <jbalkind at ucsb.edu>
>
>
> ---
>
> drivers/mmc/Kconfig | 6 +
> drivers/mmc/Makefile | 1 +
> drivers/mmc/piton_mmc.c | 171 +++++
> 3 files changed, 178 insertions(+)
> create mode 100644 drivers/mmc/piton_mmc.c
>
> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
> index 14d79139..41822c39 100644
> --- a/drivers/mmc/Kconfig
> +++ b/drivers/mmc/Kconfig
> @@ -707,6 +707,12 @@ config MMC_SUNXI_HAS_MODE_SWITCH
> bool
> depends on MMC_SUNXI
>
> +config MMC_PITON
> + bool "MMC support for openpiton SoC"
> + depends on DM_MMC && BLK
> + help
> + This driver enables sd card support in U-Boot port for openpiton
> +
> config GENERIC_ATMEL_MCI
> bool "Atmel Multimedia Card Interface support"
> depends on DM_MMC && BLK && ARCH_AT91
> diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
> index 1c849cba..698dfe05 100644
> --- a/drivers/mmc/Makefile
> +++ b/drivers/mmc/Makefile
> @@ -71,6 +71,7 @@ obj-$(CONFIG_MMC_SDHCI_XENON) += xenon_sdhci.o
> obj-$(CONFIG_MMC_SDHCI_ZYNQ) += zynq_sdhci.o
>
> obj-$(CONFIG_MMC_SUNXI) += sunxi_mmc.o
> +obj-$(CONFIG_MMC_PITON) += piton_mmc.o
> obj-$(CONFIG_MMC_UNIPHIER) += tmio-common.o uniphier-sd.o
> obj-$(CONFIG_RENESAS_SDHI) += tmio-common.o renesas-sdhi.o
> obj-$(CONFIG_MMC_BCM2835) += bcm2835_sdhost.o
> diff --git a/drivers/mmc/piton_mmc.c b/drivers/mmc/piton_mmc.c
> new file mode 100644
> index 00000000..b550a762
> --- /dev/null
> +++ b/drivers/mmc/piton_mmc.c
> @@ -0,0 +1,171 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * (C) Copyright 2009 SAMSUNG Electronics
> + * Minkyu Kang <mk7.kang at samsung.com>
> + * Jaehoon Chung <jh80.chung at samsung.com>
> + * Portions Copyright 2011-2019 NVIDIA Corporation
> + * Portions Copyright 2021 Tianrui Wei
> + * Tianrui Wei <tianrui-wei at outlook.com>
> + */
> +
> +#include <asm/gpio.h>
> +#include <asm/io.h>
> +#include <common.h>
> +#include <dm.h>
> +#include <errno.h>
> +#include <linux/bitops.h>
> +#include <linux/types.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <log.h>
> +#include <div64.h>
> +#include <mmc.h>
> +
> +struct piton_mmc_plat {
> + struct mmc_config cfg;
> + struct mmc mmc;
> +};
> +
> +struct piton_mmc_priv {
> + u64 piton_mmc_base_addr; /* peripheral id */
> +};
> +
> +/*
> + * see mmc_read_blocks to see how it is used.
> + * start block is hidden at cmd->arg
> + * also, initialize the block size at init
> + */
> +static int piton_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
> + struct mmc_data *data)
> +{
> + /* check first if this is a pure command */
> + if (data == NULL) {
> + return 0;
> + }
> +
> + u64 byte_cnt = data->blocks * data->blocksize;
> + u64 start_block = cmd->cmdarg;
> + unsigned *buff = (unsigned int *) data->dest;
> +
> + struct piton_mmc_priv *priv = dev_get_priv(dev);
> + u64 start_addr = priv->piton_mmc_base_addr + (start_block);
> +
> + /* if there is a read */
> + if (data->flags & MMC_DATA_READ) {
> + for (u64 i = 0; i < byte_cnt; i += 4) {
> + *(buff) = readl((void *)(start_addr + i));
> + buff++;
> + }
> + } else {
> + /* else there is a write
> + * we don't handle write, so error right away
> + */
> + return -ENODEV;
> + }
> +
> + return 0;
> +}
> +
> +static int piton_mmc_ofdata_to_platdata(struct udevice *dev)
> +{
> + struct piton_mmc_priv *priv = dev_get_priv(dev);
> + struct piton_mmc_plat *plat = dev_get_platdata(dev);
> + struct mmc_config *cfg;
> + struct mmc *mmc;
> + /* fill in device description */
> + struct blk_desc *bdesc;
> +
> + priv->piton_mmc_base_addr = dev_read_addr(dev);
> + cfg = &plat->cfg;
> + cfg->name = "PITON MMC";
> + cfg->host_caps = MMC_MODE_8BIT;
> + cfg->f_max = 100000;
> + cfg->f_min = 400000;
> + cfg->voltages = MMC_VDD_21_22;
> +
> + mmc = &plat->mmc;
> + mmc->read_bl_len = MMC_MAX_BLOCK_LEN;
> + mmc->capacity_user = 0x100000000;
> + mmc->capacity_user *= mmc->read_bl_len;
> + mmc->capacity_boot = 0;
> + mmc->capacity_rpmb = 0;
> + for (int i = 0; i < 4; i++)
> + mmc->capacity_gp[i] = 0;
> + mmc->capacity = 0x2000000000ULL;
> + mmc->has_init = 1;
> +
> + bdesc = mmc_get_blk_desc(mmc);
> + bdesc->lun = 0;
> + bdesc->hwpart = 0;
> + bdesc->type = 0;
> + bdesc->blksz = mmc->read_bl_len;
> + bdesc->log2blksz = LOG2(bdesc->blksz);
> + bdesc->lba = lldiv(mmc->capacity, mmc->read_bl_len);
> +
> + return 0;
> +}
> +
> +
> +/* test if piton has the micro mmc card present
> + * always return 1, which means present
> + */
> +static int piton_mmc_getcd(struct udevice *dev) {
> + /*
> + * always return 1
> + */
> + return 1;
> +}
> +
> +/* dummy function, piton_mmc don't need initialization in hw*/
> +static const struct dm_mmc_ops piton_mmc_ops = {
> + .send_cmd = piton_mmc_send_cmd,
> + .set_ios = piton_mmc_set_ios,
> + .get_cd = piton_mmc_getcd,
> +};
> +
> +static int piton_mmc_probe(struct udevice *dev)
> +{
> + struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
> + struct piton_mmc_plat *plat = dev_get_platdata(dev);
> + struct mmc_config *cfg = &plat->cfg;
> +
> + cfg->name = dev->name;
> + upriv->mmc = &plat->mmc;
> + upriv->mmc->has_init = 1;
> + upriv->mmc->capacity = 0x2000000000ULL;
> + upriv->mmc->read_bl_len = MMC_MAX_BLOCK_LEN;
> +
> + return 0;
> +}
> +
> +static int piton_mmc_bind(struct udevice *dev)
> +{
> + struct piton_mmc_plat *plat = dev_get_platdata(dev);
> + struct mmc_config *cfg = &plat->cfg;
> +
> + cfg->name = dev->name;
> + cfg->host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_8BIT;
> + cfg->voltages = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34;
> + cfg->f_min = 1000000;
> + cfg->f_max = 52000000;
> + cfg->b_max = U32_MAX;
> +
> + return mmc_bind(dev, &plat->mmc, cfg);
> +}
> +
> +static const struct udevice_id piton_mmc_ids[] = {
> + {.compatible = "openpiton,piton-mmc"},
> + { /* sentinel */ }
> +};
> +
> +U_BOOT_DRIVER(piton_mmc_drv) = {
> + .name = "piton_mmc",
> + .id = UCLASS_MMC,
> + .of_match = piton_mmc_ids,
> + .ofdata_to_platdata = piton_mmc_ofdata_to_platdata,
> + .bind = piton_mmc_bind,
> + .probe = piton_mmc_probe,
> + .ops = &piton_mmc_ops,
> + .platdata_auto_alloc_size = sizeof(struct piton_mmc_plat),
> + .priv_auto_alloc_size = sizeof(struct piton_mmc_priv),
> +};
>
More information about the U-Boot
mailing list