[PATCH v2 31/32] pci: Drop DM_PCI
Simon Glass
sjg at chromium.org
Mon Aug 2 02:54:44 CEST 2021
This option has not effect now. Drop it, using PCI instead where needed.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
(no changes since v1)
arch/Kconfig | 1 -
arch/arm/Kconfig | 2 +-
arch/arm/mach-imx/mx6/Kconfig | 2 +-
arch/mips/Kconfig | 2 +-
board/emulation/qemu-riscv/Kconfig | 1 -
board/socionext/developerbox/Kconfig | 1 -
common/Kconfig | 1 -
drivers/gpio/Kconfig | 2 +-
drivers/i2c/Makefile | 2 +-
drivers/net/Kconfig | 6 ++---
drivers/net/mscc_eswitch/Kconfig | 2 +-
drivers/pci/Kconfig | 40 +++-------------------------
drivers/spi/Kconfig | 2 +-
drivers/virtio/Kconfig | 2 +-
test/dm/Makefile | 2 +-
15 files changed, 14 insertions(+), 54 deletions(-)
diff --git a/arch/Kconfig b/arch/Kconfig
index b6f9e177b64..8f8daadcf92 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -182,7 +182,6 @@ config X86
select SUPPORT_TPL
select CREATE_ARCH_SYMLINK
select DM
- select DM_PCI
select HAVE_ARCH_IOMAP
select HAVE_PRIVATE_LIBGCC
select OF_CONTROL
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2b7b6257057..817f5fe4781 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1669,7 +1669,7 @@ config TARGET_SL28
select DM_SPI_FLASH
select DM_ETH
select DM_MDIO
- select DM_PCI
+ select PCI
select DM_RNG
select DM_RTC
select DM_SCSI
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 789a50d4e92..515c3020faa 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -237,7 +237,7 @@ config TARGET_KOSAGI_NOVENA
select DM_ETH
select DM_GPIO
select DM_MMC
- select DM_PCI
+ select PCI
select DM_SCSI
select DM_VIDEO
select OF_CONTROL
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 6b1f10d9a0e..a5cec387a04 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -17,7 +17,7 @@ config TARGET_MALTA
select BOARD_EARLY_INIT_R
select DM
select DM_SERIAL
- select DM_PCI
+ select PCI
select DM_ETH
select DYNAMIC_IO_PORT_BASE
select MIPS_CM
diff --git a/board/emulation/qemu-riscv/Kconfig b/board/emulation/qemu-riscv/Kconfig
index 0818048ba64..46b01c2049a 100644
--- a/board/emulation/qemu-riscv/Kconfig
+++ b/board/emulation/qemu-riscv/Kconfig
@@ -51,7 +51,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
imply E1000
imply NVME
imply PCI
- imply DM_PCI
imply PCIE_ECAM_GENERIC
imply SCSI
imply DM_SCSI
diff --git a/board/socionext/developerbox/Kconfig b/board/socionext/developerbox/Kconfig
index 706b8dc0f1c..c181d26a44a 100644
--- a/board/socionext/developerbox/Kconfig
+++ b/board/socionext/developerbox/Kconfig
@@ -7,7 +7,6 @@ choice
config TARGET_DEVELOPERBOX
bool "Socionext DeveloperBox"
select PCI
- select DM_PCI
select PCIE_ECAM_SYNQUACER
select SYS_DISABLE_DCACHE_OPS
select OF_BOARD_SETUP
diff --git a/common/Kconfig b/common/Kconfig
index 2ab20a6c85b..ee14d3ad5bf 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -551,7 +551,6 @@ config MISC_INIT_R
config PCI_INIT_R
bool "Enumerate PCI buses during init"
depends on PCI
- default y if !DM_PCI
help
With this option U-Boot will call pci_init() soon after relocation,
which will enumerate PCI buses. This is needed, for instance, in the
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 09695f6c2b0..b2784915f19 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -348,7 +348,7 @@ config PIC32_GPIO
config OCTEON_GPIO
bool "Octeon II/III/TX/TX2 GPIO driver"
- depends on DM_GPIO && DM_PCI && (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2)
+ depends on DM_GPIO && PCI && (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2)
default y
help
Add support for the Marvell Octeon GPIO driver. This is used with
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index c2eb24e0f7b..c16ebb24913 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_SYS_I2C_CADENCE) += i2c-cdns.o
obj-$(CONFIG_SYS_I2C_CA) += i2c-cortina.o
obj-$(CONFIG_SYS_I2C_DAVINCI) += davinci_i2c.o
obj-$(CONFIG_SYS_I2C_DW) += designware_i2c.o
-ifdef CONFIG_DM_PCI
+ifdef CONFIG_PCI
obj-$(CONFIG_SYS_I2C_DW) += designware_i2c_pci.o
endif
obj-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8b10148579e..0a5e0ac8744 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -222,7 +222,6 @@ config DWC_ETH_QOS_TEGRA186
config E1000
bool "Intel PRO/1000 Gigabit Ethernet support"
- depends on (DM_ETH && DM_PCI) || !DM_ETH
help
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
@@ -506,7 +505,7 @@ config OCTEONTX2_CGX_INTF
config PCH_GBE
bool "Intel Platform Controller Hub EG20T GMAC driver"
- depends on DM_ETH && DM_PCI
+ depends on DM_ETH
select PHYLIB
help
This MAC is present in Intel Platform Controller Hub EG20T. It
@@ -606,7 +605,6 @@ source "drivers/net/ti/Kconfig"
config TULIP
bool "DEC Tulip DC2114x Ethernet support"
- depends on (DM_ETH && DM_PCI) || !DM_ETH
help
This driver supports DEC DC2114x Fast ethernet chips.
@@ -791,7 +789,7 @@ config HIGMACV300_ETH
config FSL_ENETC
bool "NXP ENETC Ethernet controller"
- depends on DM_PCI && DM_ETH && DM_MDIO
+ depends on DM_ETH && DM_MDIO
help
This driver supports the NXP ENETC Ethernet controller found on some
of the NXP SoCs.
diff --git a/drivers/net/mscc_eswitch/Kconfig b/drivers/net/mscc_eswitch/Kconfig
index ccf7822dbe7..930d2ef1130 100644
--- a/drivers/net/mscc_eswitch/Kconfig
+++ b/drivers/net/mscc_eswitch/Kconfig
@@ -39,7 +39,7 @@ config MSCC_SERVAL_SWITCH
config MSCC_FELIX_SWITCH
bool "Felix switch driver"
- depends on DM_DSA && DM_PCI
+ depends on DM_DSA
select FSL_ENETC
help
This driver supports the Ethernet switch integrated in the
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 2ef4d46797e..e4123ba820f 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -2,35 +2,26 @@ menuconfig PCI
bool "PCI support"
depends on DM
default y if PPC
- select DM_PCI
help
Enable support for PCI (Peripheral Interconnect Bus), a type of bus
used on some devices to allow the CPU to communicate with its
peripherals.
-config DM_PCI
- bool
- help
- Use driver model for PCI. Driver model is the new method for
- orgnising devices in U-Boot. For PCI, driver model keeps track of
- available PCI devices, allows scanning of PCI buses and provides
- device configuration support.
+ This subsystem requires driver model.
if PCI
config DM_PCI_COMPAT
bool "Enable compatible functions for PCI"
- depends on DM_PCI
help
Enable compatibility functions for PCI so that old code can be used
- with CONFIG_DM_PCI enabled. This should be used as an interim
+ with CONFIG_PCI enabled. This should be used as an interim
measure when porting a board to use driver model for PCI. Once the
board is fully supported, this option should be disabled.
config PCI_AARDVARK
bool "Enable Aardvark PCIe driver"
default n
- depends on DM_PCI
depends on DM_GPIO
depends on ARMADA_3700
help
@@ -40,14 +31,12 @@ config PCI_AARDVARK
config PCI_PNP
bool "Enable Plug & Play support for PCI"
- depends on PCI || DM_PCI
default y
help
Enable PCI memory and I/O space resource allocation and assignment.
config PCI_REGION_MULTI_ENTRY
bool "Enable Multiple entries of region type MEMORY in ranges for PCI"
- depends on PCI || DM_PCI
default n
help
Enable PCI memory regions to be of multiple entry. Multiple entry
@@ -57,7 +46,6 @@ config PCI_REGION_MULTI_ENTRY
config PCI_MAP_SYSTEM_MEMORY
bool "Map local system memory from a virtual base address"
- depends on PCI || DM_PCI
depends on MIPS
default n
help
@@ -70,7 +58,6 @@ config PCI_MAP_SYSTEM_MEMORY
config PCI_SRIOV
bool "Enable Single Root I/O Virtualization support for PCI"
- depends on PCI || DM_PCI
default n
help
Say Y here if you want to enable PCI Single Root I/O Virtualization
@@ -80,7 +67,6 @@ config PCI_SRIOV
config PCI_ARID
bool "Enable Alternate Routing-ID support for PCI"
- depends on PCI || DM_PCI
default n
help
Say Y here if you want to enable Alternate Routing-ID capability
@@ -90,7 +76,6 @@ config PCI_ARID
config PCIE_ECAM_GENERIC
bool "Generic ECAM-based PCI host controller support"
default n
- depends on DM_PCI
help
Say Y here if you want to enable support for generic ECAM-based
PCIe host controllers, such as the one emulated by QEMU.
@@ -98,7 +83,6 @@ config PCIE_ECAM_GENERIC
config PCIE_ECAM_SYNQUACER
bool "SynQuacer ECAM-based PCI host controller support"
default n
- depends on DM_PCI
select PCI_INIT_R
select PCI_REGION_MULTI_ENTRY
help
@@ -109,14 +93,12 @@ config PCIE_ECAM_SYNQUACER
config PCI_PHYTIUM
bool "Phytium PCIe support"
- depends on DM_PCI
help
Say Y here if you want to enable PCIe controller support on
Phytium SoCs.
config PCIE_DW_MVEBU
bool "Enable Armada-8K PCIe driver (DesignWare core)"
- depends on DM_PCI
depends on ARMADA_8K
help
Say Y here if you want to enable PCIe controller support on
@@ -135,7 +117,6 @@ config PCIE_DW_SIFIVE
config PCIE_FSL
bool "FSL PowerPC PCIe support"
- depends on DM_PCI
help
Say Y here if you want to enable PCIe controller support on FSL
PowerPC MPC85xx, MPC86xx, B series, P series and T series SoCs.
@@ -143,14 +124,12 @@ config PCIE_FSL
config PCI_MPC85XX
bool "MPC85XX PowerPC PCI support"
- depends on DM_PCI
help
Say Y here if you want to enable PCI controller support on FSL
PowerPC MPC85xx SoC.
config PCI_RCAR_GEN2
bool "Renesas RCar Gen2 PCIe driver"
- depends on DM_PCI
depends on RCAR_32
help
Say Y here if you want to enable PCIe controller support on
@@ -159,7 +138,6 @@ config PCI_RCAR_GEN2
config PCI_RCAR_GEN3
bool "Renesas RCar Gen3 PCIe driver"
- depends on DM_PCI
depends on RCAR_GEN3
help
Say Y here if you want to enable PCIe controller support on
@@ -167,7 +145,7 @@ config PCI_RCAR_GEN3
config PCI_SANDBOX
bool "Sandbox PCI support"
- depends on SANDBOX && DM_PCI
+ depends on SANDBOX
help
Support PCI on sandbox, as an emulated bus. This permits testing of
PCI feature such as bus scanning, device configuration and device
@@ -202,7 +180,6 @@ config PCIE_OCTEON
config PCI_XILINX
bool "Xilinx AXI Bridge for PCI Express"
- depends on DM_PCI
help
Enable support for the Xilinx AXI bridge for PCI express, an IP block
which can be used on some generations of Xilinx FPGAs.
@@ -213,7 +190,6 @@ config PCIE_LAYERSCAPE
config PCIE_LAYERSCAPE_RC
bool "Layerscape PCIe Root Complex mode support"
- depends on DM_PCI
select PCIE_LAYERSCAPE
help
Enable Layerscape PCIe Root Complex mode driver support. The Layerscape
@@ -235,7 +211,6 @@ config PCI_IOMMU_EXTRA_MAPPINGS
config PCIE_LAYERSCAPE_EP
bool "Layerscape PCIe Endpoint mode support"
- depends on DM_PCI
select PCIE_LAYERSCAPE
select PCI_ENDPOINT
help
@@ -246,7 +221,6 @@ config PCIE_LAYERSCAPE_EP
config PCIE_LAYERSCAPE_GEN4
bool "Layerscape Gen4 PCIe support"
- depends on DM_PCI
help
Support PCIe Gen4 on NXP Layerscape SoCs, which may have one or
several PCIe controllers. The PCIe controller can work in RC or
@@ -279,14 +253,12 @@ config FSL_PCIE_EP_COMPAT
config PCIE_INTEL_FPGA
bool "Intel FPGA PCIe support"
- depends on DM_PCI
help
Say Y here if you want to enable PCIe controller support on Intel
FPGA, example Stratix 10.
config PCIE_IPROC
bool "Iproc PCIe support"
- depends on DM_PCI
help
Broadcom iProc PCIe controller driver.
Say Y here if you want to enable Broadcom iProc PCIe controller,
@@ -294,7 +266,6 @@ config PCIE_IPROC
config PCI_MVEBU
bool "Enable Armada XP/38x PCIe driver"
depends on ARCH_MVEBU
- select DM_PCI
select MISC
help
Say Y here if you want to enable PCIe controller support on
@@ -302,7 +273,6 @@ config PCI_MVEBU
config PCIE_DW_COMMON
bool
- select DM_PCI
config PCI_KEYSTONE
bool "TI Keystone PCIe controller"
@@ -312,7 +282,6 @@ config PCI_KEYSTONE
config PCIE_MEDIATEK
bool "MediaTek PCIe Gen2 controller"
- depends on DM_PCI
depends on ARCH_MEDIATEK
help
Say Y here if you want to enable Gen2 PCIe controller,
@@ -329,7 +298,6 @@ config PCIE_DW_MESON
config PCIE_ROCKCHIP
bool "Enable Rockchip PCIe driver"
depends on ARCH_ROCKCHIP
- select DM_PCI
select PHY_ROCKCHIP_PCIE
default y if ROCKCHIP_RK3399
help
@@ -347,7 +315,6 @@ config PCIE_DW_ROCKCHIP
config PCI_BRCMSTB
bool "Broadcom STB PCIe controller"
- depends on DM_PCI
depends on ARCH_BCM283X
help
Say Y here if you want to enable support for PCIe controller
@@ -357,7 +324,6 @@ config PCI_BRCMSTB
config PCIE_UNIPHIER
bool "Socionext UniPhier PCIe driver"
- depends on DM_PCI
depends on ARCH_UNIPHIER
select PHY_UNIPHIER_PCIE
help
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 5c2a60a2142..db236591f64 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -271,7 +271,7 @@ config NXP_FSPI
config OCTEON_SPI
bool "Octeon SPI driver"
- depends on DM_PCI && (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2)
+ depends on ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2
help
Enable the Octeon SPI driver. This driver can be used to
access the SPI NOR flash on Octeon II/III and OcteonTX/TX2
diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
index 18356070833..863c3fbe029 100644
--- a/drivers/virtio/Kconfig
+++ b/drivers/virtio/Kconfig
@@ -31,7 +31,7 @@ config VIRTIO_MMIO
config VIRTIO_PCI
bool "PCI driver for virtio devices"
- depends on DM_PCI
+ depends on PCI
select VIRTIO
help
This driver provides support for virtio based paravirtual device
diff --git a/test/dm/Makefile b/test/dm/Makefile
index d5c42e7643e..958d7df94a4 100644
--- a/test/dm/Makefile
+++ b/test/dm/Makefile
@@ -64,7 +64,7 @@ obj-y += of_extra.o
obj-$(CONFIG_OSD) += osd.o
obj-$(CONFIG_DM_VIDEO) += panel.o
obj-$(CONFIG_EFI_PARTITION) += part.o
-obj-$(CONFIG_DM_PCI) += pci.o
+obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_P2SB) += p2sb.o
obj-$(CONFIG_PCI_ENDPOINT) += pci_ep.o
obj-$(CONFIG_PCH) += pch.o
--
2.32.0.554.ge1b32706d8-goog
More information about the U-Boot
mailing list