August 2021 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sun Aug 1 00:37:14 CEST 2021
Ending: Tue Aug 31 23:58:55 CEST 2021
Messages: 2776

• [PATCH 2/3] arm: kirkwood: Dreamplug: Use Ethernet PHY name and address from device tree   Tony Dinh
• [PATCH 3/3] dtoc: Support widening a bool value   Simon Glass
• [PATCH 2/3] dtoc: Fix widening an int array to an int   Simon Glass
• [PATCH 1/3] dtoc: Rename is_wider_than() to reduce confusion   Simon Glass
• [PATCH] sandbox: Reduce keyed autoboot delay   Simon Glass
• [PATCH 5/5] moveconfig: Update to newer kconfiglib   Simon Glass
• [PATCH 4/5] doc: Fix up outdated moveconfig docs   Simon Glass
• [PATCH 3/5] doc: Add docs for the moveconfig tool   Simon Glass
• [PATCH 2/5] doc: Move coccinelle into its own section   Simon Glass
• [PATCH 1/5] doc: Create an intro section for testing   Simon Glass
• [PATCH v6 0/5] of-platdata: Avoid building libfdt   Simon Glass
• [PATCH v6 0/5] of-platdata: Avoid building libfdt   Tom Rini
• [PATCH] arm: am335x: Enable SPL_OF_CONTROL on some configs   Tom Rini
• [PATCH v2 4/5] efi: Use 16-bit unicode strings   Tom Rini
• [PATCH v2 1/5] checkpatch: Support wide strings   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• [PATCH v2] arm: mvebu: sata_mv failed to identify HDDs during cold start   Tony Dinh
• [PATCH v2 6/9] sandbox: add config for efi capsule authentication test   AKASHI Takahiro
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH 5/5] arm: kirkwood: Do not overwrite CONFIG_SYS_TCLK   Chris Packham
• [PATCH 1/3] doc: Move devicetree control doc to rST   Heinrich Schuchardt
• [PATCH 2/3] doc: Update devicedocs including how to add tweaks   Heinrich Schuchardt
• [PATCH 3/3] doc: Add a note about why devicetree is used   Heinrich Schuchardt
• [PATCH v2 1/9] tools: mkeficapsule: add firmwware image signing   Heinrich Schuchardt
• [PATCH v2 2/9] tools: mkeficapsule: add man page   Heinrich Schuchardt
• [PATCH v2 3/9] doc: update UEFI document for usage of mkeficapsule   Heinrich Schuchardt
• [PATCH v2 4/9] efi_loader: ease the file path check for public key   Heinrich Schuchardt
• [PATCH v2 5/9] test/py: efi_capsule: add image authentication test   Heinrich Schuchardt
• [PATCH v2 0/9] efi_loader: capsule: improve capsule authentication support   Heinrich Schuchardt
• [PATCH 5/5] arm: kirkwood: Do not overwrite CONFIG_SYS_TCLK   Pali Rohár
• Please pull u-boot-marvell/master   Pali Rohár
• [PATCH] Nokia RX-51: Convert documentation to rst format   Pali Rohár
• Broken CONFIG_SPL_SATA_SUPPORT=y   Pali Rohár
• [PATCH] board: fsl_validate: Fix resource leak issue   Kshitiz Varshney
• Please pull u-boot-marvell/master   Tom Rini
• [PATCH v2 1/1] lib: disable CONFIG_SPL_HEXDUMP by default   Heinrich Schuchardt
• Please pull u-boot-marvell/master   Pali Rohár
• qemu-x86_64: debugging after relocation: breakpoints not working   Matwey V. Kornilov
• qemu-x86_64: debugging after relocation: breakpoints not working   Matwey V. Kornilov
• qemu-x86_64: debugging after relocation: breakpoints not working   Matwey V. Kornilov
• [PATCH v2 0/4] sf: Add documentation and an 'sf mmap' command   Simon Glass
• [PATCH v2 1/4] command: Use a constant pointer for the help   Simon Glass
• [PATCH v2 2/4] sf: Tidy up code to avoid #ifdef   Simon Glass
• [PATCH v2 3/4] sf: doc: Add documentation for the 'sf' command   Simon Glass
• [PATCH v2 4/4] sf: Provide a command to access memory-mapped SPI   Simon Glass
• [PATCH] dm: core: Don't allow uclass use before ready   Simon Glass
• Please pull u-boot-dm   Simon Glass
• [PATCH v2 6/9] sandbox: add config for efi capsule authentication test   Simon Glass
• [PATCH 1/7] x86: fsp: Don't program MTRR for DRAM   Simon Glass
• [PATCH 2/7] x86: mtrr: Do not clear the unused ones in mtrr_commit()   Simon Glass
• [PATCH 3/7] x86: mtrr: Skip MSRs that were already programmed in mtrr_commit()   Simon Glass
• [PATCH 4/7] x86: mtrr: Abort if requested size is not power of 2   Simon Glass
• [PATCH 5/7] x86: cmd: hob: Fix the command usage and help messages   Simon Glass
• [PATCH 6/7] x86: cmd: hob: Fix display of resource type for system memory   Simon Glass
• [PATCH 7/7] x86: fsp: Only FSP2 has INIT_PHASE_END_FIRMWARE   Simon Glass
• [PATCH 1/2] x86: queensbay: Optimize disable_igd() a little   Simon Glass
• [PATCH 2/2] x86: crownbay: Use external graphics card by default   Simon Glass
• [PATCH v4 00/12] vpl: Introduce a verifying program loader   Simon Glass
• [PATCH v4 01/12] doc: Convert SPL documentation to ReST   Simon Glass
• [PATCH v4 02/12] doc: Expand SPL docs to explain the phase and config   Simon Glass
• [PATCH v4 03/12] test: Tidy up test building with SPL   Simon Glass
• [PATCH v4 04/12] spl: Move TPL_HASH_SUPPORT down next to other TPL options   Simon Glass
• [PATCH v4 05/12] bloblist: Correct Kconfig dependencies   Simon Glass
• [PATCH v4 06/12] avb: Don't build in SPL   Simon Glass
• [PATCH v4 07/12] Makefile: Simplify devicetree rules for SPL/TPL   Simon Glass
• [PATCH v4 08/12] Makefile: Tidy up the TPL build rules   Simon Glass
• [PATCH v4 09/12] binman: Add VPL support   Simon Glass
• [PATCH v4 10/12] Introduce Verifying Program Loader (VPL)   Simon Glass
• [PATCH v4 11/12] vpl: Add Kconfig options for VPL   Simon Glass
• [PATCH v4 12/12] sandbox: Add a build for VPL   Simon Glass
• [PATCH v2 3/4] sf: doc: Add documentation for the 'sf' command   Heinrich Schuchardt
• [PATCH] doc: board: Move j721e document to doc/board/ti/ directory   Heinrich Schuchardt
• [PATCH 1/1] doc: add missing board/ti/index.rst   Heinrich Schuchardt
• [PATCH 1/1] doc: handle 'make htmldocs' warnings as errors   Heinrich Schuchardt
• [PATCH] doc: board: Move j721e document to doc/board/ti/ directory   Tom Rini
• [PATCH] btrfs: Use default subvolume as filesystem root   Matwey V. Kornilov
• [PATCH v3 1/3] imx8: ls1028a: Drop raw image support   Simon Glass
• [PATCH v3 2/3] arm: Add an __image_copy_start symbol for ARMv8   Simon Glass
• [PATCH v3 3/3] binman: Show an error if __image_copy_start is missing   Simon Glass
• [PATCH v3 00/15] image: A partial series for the image clean-up   Simon Glass
• [PATCH v3 01/15] lib: Add memdup()   Simon Glass
• [PATCH v3 02/15] Add support for an owned buffer   Simon Glass
• [PATCH v3 03/15] compiler: Add a comment to host_build()   Simon Glass
• [PATCH v3 04/15] zstd: Create a function for use from U-Boot   Simon Glass
• [PATCH v3 05/15] btrfs: Use U-Boot API for decompression   Simon Glass
• [PATCH v3 06/15] image: Avoid switch default in image_decomp()   Simon Glass
• [PATCH v3 07/15] image: Update zstd to avoid reporting error twice   Simon Glass
• [PATCH v3 08/15] gzip: Avoid use of u64   Simon Glass
• [PATCH v3 09/15] image: Update image_decomp() to avoid ifdefs   Simon Glass
• [PATCH v3 10/15] image: Split board code out into its own file   Simon Glass
• [PATCH v3 11/15] image: Fix up checkpatch warnings in image-board.c   Simon Glass
• [PATCH v3 12/15] image: Split host code out into its own file   Simon Glass
• [PATCH v3 13/15] image: Create a function to do manual relocation   Simon Glass
• [PATCH v3 14/15] image: Avoid #ifdefs for manual relocation   Simon Glass
• [PATCH v3 15/15] image: Remove ifdefs around image_setup_linux() el at   Simon Glass
• [PATCH] doc: board: Move j721e document to doc/board/ti/ directory   Heinrich Schuchardt
• [PATCH v3 0/4] sf: Add documentation and an 'sf mmap' command   Simon Glass
• [PATCH v3 1/4] command: Use a constant pointer for the help   Simon Glass
• [PATCH v3 2/4] sf: Tidy up code to avoid #ifdef   Simon Glass
• [PATCH v3 3/4] sf: doc: Add documentation for the 'sf' command   Simon Glass
• [PATCH v3 4/4] sf: Provide a command to access memory-mapped SPI   Simon Glass
• U-Boot zboot on x86-64 VirtualBox UEFI.   Simon Glass
• [PATCH v2 3/4] sf: doc: Add documentation for the 'sf' command   Simon Glass
• [PATCH v3 01/15] lib: Add memdup()   Heinrich Schuchardt
• [PATCH] doc: board: Move j721e document to doc/board/ti/ directory   Tom Rini
• [PATCH 1/1] doc: add graphviz imagemagick as build dependencies   Heinrich Schuchardt
• [PATCH v2] mmc: Add support for enumerating MMC card in a given mode using mmc command   Jaehoon Chung
• [PATCH v3 00/16] misc: Some more misc patches   Simon Glass
• [PATCH] patman: Avoid blank lines between tags   Simon Glass
• [PATCH] mkimage: clarify error message for empty input files   Thomas Hebb
• [PATCH] mkimage: clarify error message for empty input files   Tom Hebb
• [PATCH v2 4/5] efi: Use 16-bit unicode strings   Simon Glass
• [PATCH v2 6/9] sandbox: add config for efi capsule authentication test   AKASHI Takahiro
• [PATCH] btrfs: Use default subvolume as filesystem root   Qu Wenruo
• [PATCH v3 1/7] mmc: zynq_sdhci: Return errors from arasan_sdhci_set_tapdelay   Jaehoon Chung
• [PATCH v3 2/7] mmc: sdhci: Change prototype of set_delay to return errors   Jaehoon Chung
• [PATCH v2 4/5] efi: Use 16-bit unicode strings   Tom Rini
• [PATCH 1/3 v2] efi_capsule: Move signature from DTB to .rodata   Simon Glass
• [PATCH v2 4/5] efi: Use 16-bit unicode strings   Simon Glass
• [PATCH v2 00/32] pci: Drop all pre-driver model code   Simon Glass
• [PATCH v2 01/32] pci: Drop old code from pci command   Simon Glass
• [PATCH v2 02/32] ppc: Remove UCP1020 board   Simon Glass
• [PATCH v2 03/32] pci: Drop old code from header file   Simon Glass
• [PATCH v2 04/32] pci: Remove guard around compatibility functions   Simon Glass
• [PATCH v2 05/32] pci: Drop DM_PCI check from fdtdec   Simon Glass
• [PATCH v2 06/32] pci: Drop DM_PCI check from pci_common   Simon Glass
• [PATCH v2 07/32] ppc: Drop CONFIG_SYS_PCI_SUBSYS_VENDORID   Simon Glass
• [PATCH v2 08/32] pci: powerpc: Drop old code   Simon Glass
• [PATCH v2 09/32] pci: freescale: Drop old code   Simon Glass
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Marek Vasut
• [PATCH v2 10/32] pci: dm: core: Drop DM_PCI check from devfdt_get_addr_pci()   Simon Glass
• [PATCH v2 11/32] ppc: Drop DM_PCI from config files   Simon Glass
• [PATCH v2 12/32] pci: acpi: Drop DM_PCI check from ahci   Simon Glass
• [PATCH v2 13/32] pci: usb: Drop DM_PCI from ohci   Simon Glass
• [PATCH v2 14/32] ppc: malta: Drop use of DM_PCI   Simon Glass
• [PATCH v2 15/32] ppc: socrates: Drop use of DM_PCI   Simon Glass
• [PATCH v2 16/32] pci: gt64120: Drop use of DM_PCI   Simon Glass
• [PATCH v2 17/32] pci: msc01: Drop use of DM_PCI   Simon Glass
• [PATCH v2 18/32] pci: imx: Drop use of DM_PCI   Simon Glass
• [PATCH v2 19/32] pci: scsi: pci: Drop DM_PCI check from scsi   Simon Glass
• [PATCH v2 20/32] pci: Drop DM_PCI check from bios_emul   Simon Glass
• [PATCH v2 21/32] net: Drop DM_PCI check from designware driver   Simon Glass
• [PATCH v2 22/32] pci: imx: Drop DM_PCI check from cpu driver   Simon Glass
• [PATCH v2 23/32] pci: arm: mvebu: Drop DM_PCI check from   Simon Glass
• [PATCH v2 24/32] pci: sata_sil: Drop DM_PCI checks   Simon Glass
• [PATCH v2 25/32] distro_bootcmd: Drop DM_PCI check   Simon Glass
• [PATCH v2 26/32] pci: Drop pci_init_board()   Simon Glass
• [PATCH v2 27/32] pci: ppc: Drop ftpci100 driver   Simon Glass
• [PATCH v2 28/32] ppc: Drop idt8t49n222a_serdes_clk driver   Simon Glass
• [PATCH v2 29/32] ppc: Drop t4qds and b4860qds references   Simon Glass
• [PATCH v2 30/32] pci: Drop PCI_INDIRECT_BRIDGE   Simon Glass
• [PATCH v2 31/32] pci: Drop DM_PCI   Simon Glass
• [PATCH v2 32/32] pci: Drop migration method   Simon Glass
• [PATCH v3 0/5] Fix compiler warnings for 32-bit ARM   Simon Glass
• [PATCH v3 1/5] checkpatch: Support wide strings   Simon Glass
• [PATCH v3 2/5] efi: Use 16-bit unicode strings   Simon Glass
• [PATCH v3 3/5] sandbox: Detect the host bit size automatically   Simon Glass
• [PATCH v3 4/5] treewide: Use 16-bit unicode strings   Simon Glass
• [PATCH v3 5/5] RFC: treewide: Drop -fshort-char   Simon Glass
• [PATCH v2 1/3] doc: Move devicetree control doc to rST   Simon Glass
• [PATCH v2 2/3] doc: Update devicedocs including how to add tweaks   Simon Glass
• [PATCH v2 3/3] doc: Add a note about why devicetree is used   Simon Glass
• [PATCH v5 11/12] vpl: Add Kconfig options for VPL   Simon Glass
• [PATCH] Revert "efi_capsule: Move signature from DTB to .rodata"   Simon Glass
• [PATCH] Revert "efi_capsule: Move signature from DTB to .rodata"   Ilias Apalodimas
• [PATCH 1/3] dtoc: Rename is_wider_than() to reduce confusion   Walter Lozano
• [PATCH 2/3] dtoc: Fix widening an int array to an int   Walter Lozano
• [PATCH] Revert "efi_capsule: Move signature from DTB to .rodata"   Simon Glass
• [PATCH 2/7] x86: mtrr: Do not clear the unused ones in mtrr_commit()   Bin Meng
• [PATCH 3/7] x86: mtrr: Skip MSRs that were already programmed in mtrr_commit()   Bin Meng
• [PATCH 1/3] dtoc: Rename is_wider_than() to reduce confusion   Simon Glass
• [PATCH 2/3] dtoc: Fix widening an int array to an int   Simon Glass
• [PATCH 4/7] x86: mtrr: Abort if requested size is not power of 2   Bin Meng
• [PATCH 5/7] x86: cmd: hob: Fix the command usage and help messages   Bin Meng
• [PATCH 6/7] x86: cmd: hob: Fix display of resource type for system memory   Bin Meng
• [PATCH 1/7] x86: fsp: Don't program MTRR for DRAM   Bin Meng
• [PATCH 7/7] x86: fsp: Only FSP2 has INIT_PHASE_END_FIRMWARE   Bin Meng
• [PATCH v2 02/32] ppc: Remove UCP1020 board   Tom Rini
• [PATCH 1/2] x86: queensbay: Optimize disable_igd() a little   Bin Meng
• [PATCH v2 1/9] tools: mkeficapsule: add firmwware image signing   AKASHI Takahiro
• [PATCH] ARM: omap3: evm: Enable booting 'fitImage' with DEFAULT_FIT_TI_ARGS   Derald D. Woods
• [PATCH v2 5/9] test/py: efi_capsule: add image authentication test   AKASHI Takahiro
• [PATCH v2 4/9] efi_loader: ease the file path check for public key   AKASHI Takahiro
• [PATCH v2 0/9] efi_loader: capsule: improve capsule authentication support   AKASHI Takahiro
• [PATCH] Nokia RX-51: Convert documentation to rst format   Lokesh Vutla
• [PATCH v2 1/9] tools: mkeficapsule: add firmwware image signing   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: typo cerificate   Heinrich Schuchardt
• [PATCH 1/5] arm: mvebu: a38x: Detect CONFIG_SYS_TCLK from SAR register   Stefan Roese
• [PATCH 2/5] arm: mvebu: a37x: Detect CONFIG_SYS_TCLK from SAR register   Stefan Roese
• [PATCH 3/5] arm: mvebu: msys: Set CONFIG_SYS_TCLK globally   Stefan Roese
• [PATCH 4/5] arm: mvebu: axp: Set CONFIG_SYS_TCLK globally   Stefan Roese
• [PATCH 5/5] arm: kirkwood: Do not overwrite CONFIG_SYS_TCLK   Stefan Roese
• [PATCH 2/3] arm: kirkwood: Dreamplug: Use Ethernet PHY name and address from device tree   Stefan Roese
• [PATCH v2 1/9] tools: mkeficapsule: add firmwware image signing   AKASHI Takahiro
• [PATCH v2 1/2] x86: queensbay: Return directly if IGD / SDVO were already disabled   Bin Meng
• [PATCH v2 2/2] x86: crownbay: Use external graphics card by default   Bin Meng
• [PATCH v2 1/2] x86: fsp: Don't program MTRR for DRAM for FSP1   Bin Meng
• [PATCH v2 2/2] x86: fsp: Only FSP2 has INIT_PHASE_END_FIRMWARE   Bin Meng
• [PATCH 1/1] efi_loader: typo cerificate   Ilias Apalodimas
• [PATCH] Revert "efi_capsule: Move signature from DTB to .rodata"   KASHI Takahiro
• [PATCH] riscv: cpu: fu740: Fix typo of date   Zong Li
• [PATCH] riscv: cpu: fu740: Fix typo of date   Bin Meng
• [PATCH 2/3] arm: kirkwood: Dreamplug: Use Ethernet PHY name and address from device tree   Tony Dinh
• [PATCH] riscv: cpu: fu740: Fix typo of date   Leo Liang
• [PATCH v2] armv8: fsl : create bootcmd and mcinitcmd as per boot source   Wasim Khan
• [PATCH v2 1/3] risv: add missing SBI extension definitions   Leo Liang
• [PATCH 1/1] doc: riscv: flashing SiFive boards   Leo Liang
• [PATCH 1/2] board: sifive: compile stuff only related to SPL in SPL build   Leo Liang
• U-boot   Rasmus Villemoes
• [PATCH 1/1] doc: riscv: flashing SiFive boards   Bin Meng
• [PATCH 2/2] board: sifive: overwrite board_fdt_blob_setup in u-boot proper   Leo Liang
• [PATCH 1/1] doc: riscv: flashing SiFive boards   Leo Liang
• [PATCH v3 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Rasmus Villemoes
• U-boot   Roman Kopytin
• U-boot   Rasmus Villemoes
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Jan Kiszka
• [PATCH V4 00/44] imx: add i.MX8ULP support   Peng Fan (OSS)
• [PATCH v3 0/2] x86: Various fixes to MTRR and FSP codes   Bin Meng
• [PATCH v3 1/2] x86: fsp: Don't program MTRR for DRAM for FSP1   Bin Meng
• [PATCH v3 2/2] x86: fsp: Only FSP2 has INIT_PHASE_END_FIRMWARE   Bin Meng
• [PATCH 1/1] doc: riscv: flashing SiFive boards   Bin Meng
• [PULL] please pull mmc-2021-7-30   Peng Fan (OSS)
• [PATCH V4 00/44] imx: add i.MX8ULP support   Stefano Babic
• U-boot   Roman Kopytin
• [PATCH v1] imx: mkimage_fit_atf: replace @ with hyphen   Peng Fan (OSS)
• [PATCH v4 0/7] Arasan sdhci driver updates   Ashok Reddy Soma
• [PATCH v4 1/7] mmc: zynq_sdhci: Return errors from arasan_sdhci_set_tapdelay   Ashok Reddy Soma
• [PATCH v4 2/7] mmc: sdhci: Change prototype of set_delay to return errors   Ashok Reddy Soma
• [PATCH v4 3/7] zynqmp_firmware: Add zynqmp firmware related enums   Ashok Reddy Soma
• [PATCH v4 4/7] mmc: zynq_sdhci: Add xilinx_pm_request() method to set tapdelays   Ashok Reddy Soma
• [PATCH v4 5/7] mmc: zynq_sdhci: Move setting tapdelay code to driver   Ashok Reddy Soma
• [PATCH v4 6/7] mmc: zynq_sdhci: Wait till sd card detect state is stable   Ashok Reddy Soma
• [PATCH v4 7/7] mmc: zynq_sdhci: Use set_control_reg from sdhci.c   Ashok Reddy Soma
• [PATCH 1/1] doc: riscv: flashing SiFive boards   Leo Liang
• [PATCH v3 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Stefan Roese
• [PATCH] armv7: Add Position Independent Execution support   Chia-Wei Wang
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Marek Vasut
• Pull request for efi-2021-10-rc2   Heinrich Schuchardt
• [PATCH V4 00/44] imx: add i.MX8ULP support   Peng Fan (OSS)
• U-boot   Rasmus Villemoes
• U-boot   Roman Kopytin
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Jan Kiszka
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Marek Vasut
• [PATCH] clk: stm32mp1: add support of BSEC clock   Patrice CHOTARD
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Jan Kiszka
• U-boot   Roman Kopytin
• [PATCH 0/5] Use device tree to get DRAM for sama5d27_som1_ek/sama5d2_xplained   Clément Léger
• [PATCH 1/5] board: sama5d27_som1_ek: Get dram size and base from device tree   Clément Léger
• [PATCH 2/5] board: sama5d27_som1_ek: Modify load addresses   Clément Léger
• [PATCH 3/5] ARM: dts: at91: sama5d2: Add memory node in devicetree   Clément Léger
• [PATCH 4/5] board: sama5d2_xplained: Get dram size and base from device tree   Clément Léger
• [PATCH 5/5] board: sama5d2_xplained: Modify load addresses   Clément Léger
• [PATCH] arm: dts: stm32mp15: alignment with v5.14   Patrice CHOTARD
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Tom Rini
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Tom Rini
• [PATCH 00/11] Reduce usage of timestamp macros   Pali Rohár
• [PATCH 01/11] Remove #include <timestamp.h> from files which do not need it   Pali Rohár
• [PATCH 02/11] Remove #include <version.h> from files which do not need it   Pali Rohár
• [PATCH 03/11] efi_loader: Use directly version_string variable   Pali Rohár
• [PATCH 04/11] version: Move version_string[] from version.h to version_string.h   Pali Rohár
• [PATCH 05/11] m68k: mcf: Remove overloading version_string   Pali Rohár
• [PATCH 06/11] version: Put version_string[] variable into section .text_version_string   Pali Rohár
• [PATCH 07/11] powerpc: mpc: Put U-Boot version string at correct place by linker script   Pali Rohár
• [PATCH 08/11] version: Do not make version_string[] variable as a weak   Pali Rohár
• [PATCH 09/11] x86: quark: MRC: Remove U_BOOT_DATE and U_BOOT_TIME from debug log   Pali Rohár
• [PATCH 10/11] version: Remove global macro U_BOOT_VERSION_STRING from version.h   Pali Rohár
• [PATCH 11/11] Remove including timestamp.h in version.h   Pali Rohár
• [PATCH v3 5/5] RFC: treewide: Drop -fshort-char   Tom Rini
• [PATCH] dtoc: Correct the intarray-widening test case   Simon Glass
• [PATCH 01/11] Remove #include <timestamp.h> from files which do not need it   Tom Rini
• [PATCH 02/11] Remove #include <version.h> from files which do not need it   Tom Rini
• [PATCH 04/11] version: Move version_string[] from version.h to version_string.h   Tom Rini
• [PATCH 06/11] version: Put version_string[] variable into section .text_version_string   Tom Rini
• [PATCH 08/11] version: Do not make version_string[] variable as a weak   Tom Rini
• [PATCH 10/11] version: Remove global macro U_BOOT_VERSION_STRING from version.h   Tom Rini
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Jan Kiszka
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Tom Rini
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Jan Kiszka
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Tom Rini
• [PATCH v2 0/3] efi: Minimal revert to rodata change   Simon Glass
• [PATCH v2 1/3] Revert "doc: Update CapsuleUpdate READMEs"   Simon Glass
• [PATCH v2 2/3] Revert "mkeficapsule: Remove dtb related options"   Simon Glass
• [PATCH v2 3/3] Revert "efi_capsule: Move signature from DTB to .rodata"   Simon Glass
• [PATCH] Revert "efi_capsule: Move signature from DTB to .rodata"   Simon Glass
• [PATCH v2 1/2] x86: queensbay: Return directly if IGD / SDVO were already disabled   Simon Glass
• [PATCH v3 1/2] x86: fsp: Don't program MTRR for DRAM for FSP1   Simon Glass
• [PATCH v3 2/2] x86: fsp: Only FSP2 has INIT_PHASE_END_FIRMWARE   Simon Glass
• [PATCH 1/2] arm: mach-snapdragon: misc: Initialize eMMC if necessary   Stephan Gerhold
• [PATCH 2/2] arm: mach-snapdrgon: misc: Simplify msm_generate_mac_addr()   Stephan Gerhold
• [PATCH v4 00/10] handling all DM watchdogs in watchdog_reset()   Rasmus Villemoes
• [PATCH v4 01/10] watchdog: wdt-uclass.c: use wdt_start() in wdt_expire_now()   Rasmus Villemoes
• [PATCH v4 02/10] watchdog: wdt-uclass.c: introduce struct wdt_priv   Rasmus Villemoes
• [PATCH v4 03/10] watchdog: wdt-uclass.c: neaten UCLASS_DRIVER definition   Rasmus Villemoes
• [PATCH v4 04/10] watchdog: wdt-uclass.c: refactor initr_watchdog()   Rasmus Villemoes
• [PATCH v4 05/10] watchdog: wdt-uclass.c: keep track of each device's running state   Rasmus Villemoes
• [PATCH v4 06/10] sandbox: disable CONFIG_WATCHDOG_AUTOSTART   Rasmus Villemoes
• [PATCH v4 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Rasmus Villemoes
• [PATCH v4 08/10] watchdog: add gpio watchdog driver   Rasmus Villemoes
• [PATCH v4 09/10] sandbox: add test of wdt_gpio driver   Rasmus Villemoes
• [PATCH v4 10/10] sandbox: add test of wdt-uclass' watchdog_reset()   Rasmus Villemoes
• [PATCH v5 0/5] Add SIMATIC IOT2050 board support   Jan Kiszka
• [PATCH v5 1/5] arm: dts: Add IOT2050 device tree files   Jan Kiszka
• [PATCH v5 2/5] board: siemens: Add support for SIMATIC IOT2050 devices   Jan Kiszka
• [PATCH v5 3/5] arm64: dts: ti: k3-am65-mcu: Add RTI watchdog entry   Jan Kiszka
• [PATCH v5 4/5] watchdog: rti_wdt: Add support for loading firmware   Jan Kiszka
• [PATCH v5 5/5] iot2050: Enable watchdog support, but do not auto-start it   Jan Kiszka
• [PATCH v2 0/3] efi: Minimal revert to rodata change   Ilias Apalodimas
• [PATCH v5 2/5] board: siemens: Add support for SIMATIC IOT2050 devices   Tom Rini
• [PATCH v5 2/5] board: siemens: Add support for SIMATIC IOT2050 devices   Jan Kiszka
• [PATCH v5 2/5] board: siemens: Add support for SIMATIC IOT2050 devices   Tom Rini
• [Uboot-stm32] [PATCH v2 2/5] usb: gadget: Add bcdDevice for the DWC2 USB Gadget Controller   Patrice CHOTARD
• [PATCH v3 1/2] x86: fsp: Don't program MTRR for DRAM for FSP1   Bin Meng
• [PATCH v3 2/2] x86: fsp: Only FSP2 has INIT_PHASE_END_FIRMWARE   Bin Meng
• [PATCH v2 1/2] x86: queensbay: Return directly if IGD / SDVO were already disabled   Bin Meng
• [PATCH v2 2/2] x86: crownbay: Use external graphics card by default   Bin Meng
• Please pull u-boot-dm   Tom Rini
• [PULL] please pull mmc-2021-7-30   Tom Rini
• Pull request for efi-2021-10-rc2   Tom Rini
• [PATCH] doc: stm32mp1: add page for device tree bindings   Patrice Chotard
• [PATCH v3 2/4] sf: Tidy up code to avoid #ifdef   Pratyush Yadav
• [PATCH v3 3/4] sf: doc: Add documentation for the 'sf' command   Pratyush Yadav
• [PATCH v2 0/3] efi: Minimal revert to rodata change   Heinrich Schuchardt
• [PATCH] lib: rsa: Extract public key from private key if keyfile argument is used   Chan, Donald
• [PATCH v2 01/14] hash: Ensure verification hex pairs are terminated   Tom Rini
• [PATCH v2 02/14] global: Convert simple_strtoul() with hex to hextoul()   Tom Rini
• [PATCH v2 03/14] global: Convert simple_strtoul() with decimal to dectoul()   Tom Rini
• [PATCH v2 04/14] lib: Comment the base parameter with simple_strtoul/l()   Tom Rini
• [PATCH v2 05/14] lib: Drop unnecessary check for hex digit   Tom Rini
• [PATCH v2 06/14] lib: Add tests for simple_strtoull()   Tom Rini
• [PATCH v2 07/14] lib: Add octal tests for simple_strtoul/l()   Tom Rini
• [PATCH v2 08/14] lib: Move common digit-parsing code into a function   Tom Rini
• [PATCH v2 09/14] doc: Convert command-line info to rST   Tom Rini
• [PATCH v2 10/14] doc: Add a note about number representation   Tom Rini
• [PATCH v2 11/14] lib: Allow using 0x when a decimal value is requested   Tom Rini
• [PATCH] dtoc: Correct the intarray-widening test case   Walter Lozano
• [PATCH v3 0/7] vpl: Introduce a verifying program loader   Tom Rini
• [PATCH v2 6/9] sandbox: add config for efi capsule authentication test   Simon Glass
• [PATCH v3 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Simon Glass
• U-boot   Simon Glass
• [PATCH v2 1/5] checkpatch: Support wide strings   Simon Glass
• [PATCH] mkimage: clarify error message for empty input files   Simon Glass
• Broken CONFIG_SPL_SATA_SUPPORT=y   Simon Glass
• [PATCH 09/11] x86: quark: MRC: Remove U_BOOT_DATE and U_BOOT_TIME from debug log   Simon Glass
• [PATCH 11/11] Remove including timestamp.h in version.h   Simon Glass
• [PATCH v4 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Simon Glass
• [PATCH v2 0/3] efi: Minimal revert to rodata change   Simon Glass
• [PATCH 1/3] dtoc: Rename is_wider_than() to reduce confusion   Walter Lozano
• [PATCH 11/11] Remove including timestamp.h in version.h   Pali Rohár
• [PATCH v2 0/3] efi: Minimal revert to rodata change   Simon Glass
• [PATCH 03/11] efi_loader: Use directly version_string variable   Heinrich Schuchardt
• [PATCH 1/1] doc: add pkg-config to the build dependencies   Heinrich Schuchardt
• Broken CONFIG_SPL_SATA_SUPPORT=y   Pali Rohár
• Broken CONFIG_SPL_SATA_SUPPORT=y   Tom Rini
• Broken CONFIG_SPL_SATA_SUPPORT=y   Pali Rohár
• Broken CONFIG_SPL_SATA_SUPPORT=y   Simon Glass
• Broken CONFIG_SPL_SATA_SUPPORT=y   Pali Rohár
• Broken CONFIG_SPL_SATA_SUPPORT=y   Simon Glass
• Broken CONFIG_SPL_SATA_SUPPORT=y   Pali Rohár
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Tom Rini
• Broken CONFIG_SPL_SATA_SUPPORT=y   Simon Glass
• [PATCH] armv7: Add Position Independent Execution support   Tom Rini
• [PATCH v2 1/5] checkpatch: Support wide strings   Tom Rini
• [PATCH 11/11] Remove including timestamp.h in version.h   Tom Rini
• [PATCH] Revert "spi: spi-uclass: Add support to manually relocate spi memory ops"   Tom Rini
• Broken CONFIG_SPL_SATA_SUPPORT=y   Tom Rini
• Broken CONFIG_SPL_SATA_SUPPORT=y   Pali Rohár
• Broken CONFIG_SPL_SATA_SUPPORT=y   Tom Rini
• Broken CONFIG_SPL_SATA_SUPPORT=y   Pali Rohár
• Broken CONFIG_SPL_SATA_SUPPORT=y   Tom Rini
• New Arch For Mkimage   Tom Rini
• [EXTERNAL] Re: New Arch For Mkimage   Randy Yates
• Broken CONFIG_SPL_SATA_SUPPORT=y   Tom Rini
• [EXTERNAL] Re: New Arch For Mkimage   Tom Rini
• [PATCH v4 6/7] mmc: zynq_sdhci: Wait till sd card detect state is stable   Jaehoon Chung
• Broken CONFIG_SPL_SATA_SUPPORT=y   Pali Rohár
• Broken CONFIG_SPL_SATA_SUPPORT=y   Tom Rini
• [PATCH 1/2] arm: mach-snapdragon: misc: Initialize eMMC if necessary   Ramon Fried
• [PATCH 2/2] arm: mach-snapdrgon: misc: Simplify msm_generate_mac_addr()   Ramon Fried
• [PATCH 09/11] x86: quark: MRC: Remove U_BOOT_DATE and U_BOOT_TIME from debug log   Bin Meng
• Broken CONFIG_SPL_SATA_SUPPORT=y   Pali Rohár
• Please pull u-boot-x86   Bin Meng
• [PATCH] Revert "efi_capsule: Move signature from DTB to .rodata"   KASHI Takahiro
• [PATCH] armv7: Add Position Independent Execution support   ChiaWei Wang
• Broken CONFIG_SPL_SATA_SUPPORT=y   Tom Rini
• [PATCH] riscv: cpu: fu740: Fix typo of date   Rick Chen
• [PATCH v2 0/2] armv7: Add Position Independent Execution support   Chia-Wei Wang
• [PATCH v2 1/2] arm: Fix option dependency with Kconfig language   Chia-Wei Wang
• [PATCH v2 2/2] armv7: Add Position Independent Execution support   Chia-Wei Wang
• Pull request: u-boot-samsung master   Minkyu Kang
• [PATCH v2 0/6] Support SiFive Composable cache driver   Zong Li
• [PATCH v2 1/6] cache: add sifive composable cache driver   Zong Li
• [PATCH v2 2/6] board: sifive: use ccache driver instead of helper function   Zong Li
• [PATCH v2 3/6] riscv: lib: introduce cache_init interface   Zong Li
• [PATCH v2 4/6] riscv: sifive: use common cache_init instead of duplicated implementation   Zong Li
• [PATCH v2 5/6] riscv: lib: move platform-related libraries to sperate folder   Zong Li
• [PATCH v2 6/6] riscv: lib: modify the indent   Zong Li
• [PATCH v4 6/7] mmc: zynq_sdhci: Wait till sd card detect state is stable   Ashok Reddy Soma
• [PATCH v4 6/7] mmc: zynq_sdhci: Wait till sd card detect state is stable   Jaehoon Chung
• [PATCH v5 0/7] Arasan sdhci driver updates   Ashok Reddy Soma
• [PATCH v5 1/7] mmc: zynq_sdhci: Return errors from arasan_sdhci_set_tapdelay   Ashok Reddy Soma
• [PATCH v5 2/7] mmc: sdhci: Change prototype of set_delay to return errors   Ashok Reddy Soma
• [PATCH v5 3/7] zynqmp_firmware: Add zynqmp firmware related enums   Ashok Reddy Soma
• [PATCH v5 4/7] mmc: zynq_sdhci: Add xilinx_pm_request() method to set tapdelays   Ashok Reddy Soma
• [PATCH v5 5/7] mmc: zynq_sdhci: Move setting tapdelay code to driver   Ashok Reddy Soma
• [PATCH v5 6/7] mmc: zynq_sdhci: Wait till sd card detect state is stable   Ashok Reddy Soma
• [PATCH v5 7/7] mmc: zynq_sdhci: Use set_control_reg from sdhci.c   Ashok Reddy Soma
• [PATCH v2 2/3] Revert "mkeficapsule: Remove dtb related options"   KASHI Takahiro
• [PATCH v2 0/3] efi: Minimal revert to rodata change   Ilias Apalodimas
• [PATCH v2 0/3] efi: Minimal revert to rodata change\   Ilias Apalodimas
• [PATCH] armv7: Add Position Independent Execution support   Peng Fan (OSS)
• [PATCH v1] mtd: spi-nor-ids: Add support for XMC XM25QH64C   Jagan Teki
• [PATCH] armv7: Add Position Independent Execution support   ChiaWei Wang
• [PATCH] Avoid adding the same dataflash for the second time   Jagan Teki
• [PATCH] spi: spi-mem-nodm: Fix read data size issue   Jagan Teki
• [PATCH v2 1/2] mtd: spi-nor: Respect flash's hwcaps in spi_nor_adjust_hwcaps()   Jagan Teki
• [PATCH v2 2/2] mtd: spi-nor: Mask out fast read if not requested in DT   Jagan Teki
• [PATCH v4 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Stefan Roese
• [PATCH v4 02/10] watchdog: wdt-uclass.c: introduce struct wdt_priv   Stefan Roese
• [PATCH v3 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Rasmus Villemoes
• [PATCH] test/py: tpm2: Skip tpm pytest based on env variable   T Karthik Reddy
• [PATCH 03/11] efi_loader: Use directly version_string variable   Ilias Apalodimas
• [PATCH v4 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Stefan Roese
• [PATCH 3/5] ARM: dts: at91: sama5d2: Add memory node in devicetree   Eugen.Hristev at microchip.com
• [Patch v2 1/2] spi: nxp-fspi: Add support for IP read only   Kuldeep Singh
• [Patch v2 2/2] spi: nxp_fspi: Implement errata workaround for LS1028A   Kuldeep Singh
• [PATCH 3/5] ARM: dts: at91: sama5d2: Add memory node in devicetree   Clément Léger
• [PATCH] spi: stm32: Add ofdata_to_platdata() callback   Patrice Chotard
• [PATCH v6 0/5] Add SIMATIC IOT2050 board support   Jan Kiszka
• [PATCH v6 1/5] arm: dts: Add IOT2050 device tree files   Jan Kiszka
• [PATCH v6 2/5] board: siemens: Add support for SIMATIC IOT2050 devices   Jan Kiszka
• [PATCH v6 3/5] arm64: dts: ti: k3-am65-mcu: Add RTI watchdog entry   Jan Kiszka
• [PATCH v6 4/5] watchdog: rti_wdt: Add support for loading firmware   Jan Kiszka
• [PATCH v6 5/5] iot2050: Enable watchdog support, but do not auto-start it   Jan Kiszka
• [PATCH v1 0/7] i2c: stm32f7: driver update   Patrice Chotard
• [PATCH v1 1/7] i2c: stm32f7: move driver data of each instance in a privdata   Patrice Chotard
• [PATCH v1 2/7] arm: dts: stm32: Add i2c-analog-filter property in I2C nodes for stm32f746   Patrice Chotard
• [PATCH v1 3/7] arm: dts: stm32: Add i2c-analog-filter property in I2C nodes for stm32h743   Patrice Chotard
• [PATCH v1 4/7] i2c: stm32f7: support DT binding i2c-analog-filter   Patrice Chotard
• [PATCH v1 5/7] i2c: stm32f7: fix configuration of the digital filter   Patrice Chotard
• [PATCH v1 6/7] i2c: stm32f7: add support for DNF i2c-digital-filter binding   Patrice Chotard
• [PATCH v1 7/7] i2c: stm32f7: compute i2cclk only one time   Patrice Chotard
• [PATCH v2 1/2] arm: mach-snapdragon: misc: Initialize eMMC if necessary   Stephan Gerhold
• [PATCH v2 2/2] arm: mach-snapdrgon: misc: Simplify msm_generate_mac_addr()   Stephan Gerhold
• [PATCH] tools: add fdt_add_pubkey   Roman Kopytin
• [PATCH] scripts/checkpatch.pl: Resync with v5.13   Tom Rini
• [PATCH 1/2] x86: crownbay: Enable SeaBIOS support   Bin Meng
• [PATCH 2/2] doc: x86: Update SeaBIOS build instructions   Bin Meng
• Please pull u-boot-x86   Tom Rini
• [PATCH v2 2/2] arm: mach-snapdrgon: misc: Simplify msm_generate_mac_addr()   Ramon Fried
• U-Boot Digest, Vol 158, Issue 63   Oleksandr G Zhadan
• [PATCH v6 2/5] board: siemens: Add support for SIMATIC IOT2050 devices   Tom Rini
• [PATCH v6 2/5] board: siemens: Add support for SIMATIC IOT2050 devices   Jan Kiszka
• [PATCH v6 2/5] board: siemens: Add support for SIMATIC IOT2050 devices   Tom Rini
• [PATCH v6 2/5] board: siemens: Add support for SIMATIC IOT2050 devices   Jan Kiszka
• [PATCH v6 2/5] board: siemens: Add support for SIMATIC IOT2050 devices   Jan Kiszka
• [PATCH v6 2/5] board: siemens: Add support for SIMATIC IOT2050 devices   Tom Rini
• [PATCH v7 0/5] Add SIMATIC IOT2050 board support   Jan Kiszka
• [PATCH v7 1/5] arm: dts: Add IOT2050 device tree files   Jan Kiszka
• [PATCH v7 2/5] board: siemens: Add support for SIMATIC IOT2050 devices   Jan Kiszka
• [PATCH v7 3/5] arm64: dts: ti: k3-am65-mcu: Add RTI watchdog entry   Jan Kiszka
• [PATCH v7 4/5] watchdog: rti_wdt: Add support for loading firmware   Jan Kiszka
• [PATCH v7 5/5] iot2050: Enable watchdog support, but do not auto-start it   Jan Kiszka
• [PATCH 0/7] xyz-modem: Fix cancelling and closing transfers   Pali Rohár
• [PATCH 1/7] xyz-modem: Fix crash after cancelling transfer   Pali Rohár
• [PATCH 2/7] xyz-modem: Fix x-modem "xyzModem_eof error" at the end of file   Pali Rohár
• [PATCH 3/7] xyz-modem: Put xyzModem_stream_close debug diagnostic message into ZM_DEBUG()   Pali Rohár
• [PATCH 4/7] xyz-modem: Close stream after processing/sending terminate sequence   Pali Rohár
• [PATCH 5/7] xyz-modem: Properly abort/terminate transfer on error   Pali Rohár
• [PATCH 6/7] xyz-modem: Show information about finished transfer   Pali Rohár
• [PATCH 7/7] xyz-modem: Allow to cancel transfer also by CTRL+C   Pali Rohár
• U-Boot contributor call (3-Aug-21) in 25 minutes   Simon Glass
• [PATCH] configs: layerscape: Disable the EFI_LOADER feature   Mian Yousaf Kaukab
• Proposal: U-Boot MTD (rewriting old story)   Jagan Teki
• [PATCH v2 0/3] efi: Minimal revert to rodata change\   Simon Glass
• [PATCH v2 0/3] efi: Minimal revert to rodata change   Simon Glass
• Pull request: u-boot-samsung master   Tom Rini
• Pull request: u-boot-spi/master   Jagan Teki
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Tom Rini
• Pull request: u-boot-spi/master   Tom Rini
• [PATCH] x86: crownbay: Enable CONFIG_SPI_FLASH_SMART_HWCAPS   Bin Meng
• [PATCH 11/11] Remove including timestamp.h in version.h   Wolfgang Denk
• [PATCH 1/7] xyz-modem: Fix crash after cancelling transfer   Heinrich Schuchardt
• [PATCH 4/7] xyz-modem: Close stream after processing/sending terminate sequence   Heinrich Schuchardt
• [PATCH 0/4] arm64: dts: rockchip: px30: Linux-5.14-rc3 Sync   Jagan Teki
• [PATCH 1/4] arm64: dts: rockchip: px30: Sync Linux PX30.Core files   Jagan Teki
• [PATCH 2/4] arm64: dts: rockchip: px30: Move dmc into -u-boot.dtsi   Jagan Teki
• [PATCH 3/4] arm64: dts: rockchip: px30: Sync Linux-5.14-rc3 dts(i)   Jagan Teki
• [PATCH 4/4] engicam: px30: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF   Jagan Teki
• [PATCH] engicam: Rename board dir, px30_core to px30   Jagan Teki
• [PATCH 6/7] xyz-modem: Show information about finished transfer   Heinrich Schuchardt
• [PATCH 3/7] xyz-modem: Put xyzModem_stream_close debug diagnostic message into ZM_DEBUG()   Heinrich Schuchardt
• [PATCH 0/4] EFI: console: improves   Artem Lapkin
• [PATCH 1/4] EFI: console: query_vidconsole: multiplex adaptation   Artem Lapkin
• [PATCH 2/4] EFI: console: query_console_size: multiplex adaptation   Artem Lapkin
• [PATCH 3/4] EFI: console: max rows and cols user limit   Artem Lapkin
• [PATCH 4/4] EFI: console: improve vidconsole unicode output   Artem Lapkin
• EFI from usb HDD   Ilias Apalodimas
• [PATCH] board: amlogic: odroid-n2: fix fdtfile suffix for n2-plus   Christian Hewitt
• [PATCH 11/11] Remove including timestamp.h in version.h   Tom Rini
• [PATCH] board: amlogic: odroid-n2: fix fdtfile suffix for n2-plus   Neil Armstrong
• [PATCH 0/3] AM64: Add support for booting to kernel from USB MSC device   Aswath Govindraju
• [PATCH 1/3] board: ti: am64x: Add support for fixing dr_mode while booting from USB   Aswath Govindraju
• [PATCH 2/3] environment: ti: mmc.h: Make the finduuid generic for usage across different device types   Aswath Govindraju
• [PATCH 3/3] include: configs: am64x_evm: Add env variables for booting to kernel using USB MSC device   Aswath Govindraju
• [PATCH v2] mmc: Add support for enumerating MMC card in a given mode using mmc command   Aswath Govindraju
• [PATCH v3 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Simon Glass
• [PATCH 11/11] Remove including timestamp.h in version.h   Simon Glass
• [PATCH v3] mmc: Add support for enumerating MMC card in a given mode using mmc command   Aswath Govindraju
• [PATCH 11/11] Remove including timestamp.h in version.h   Tom Rini
• [PATCH] ARM: mach-at91: fix multiple cpu_reset definition when enabling SYSRESET   Clément Léger
• [PATCH] test/py: tpm2: Skip tpm pytest based on env variable   Tom Rini
• [PATCH] Revert "efi_capsule: Move signature from DTB to .rodata"   Simon Glass
• [PATCH v2 2/3] Revert "mkeficapsule: Remove dtb related options"   Simon Glass
• Proposal: U-Boot MTD (rewriting old story)   Simon Glass
• [PATCH] board: ge: bx50v3: Add PCIe reset to DT   Sebastian Reichel
• Proposal: U-Boot MTD (rewriting old story)   Tom Rini
• [PATCH] CI: Update to LLVM-12   Tom Rini
• [PATCH v3 2/3] arm: Add an __image_copy_start symbol for ARMv8   Scott Wood
• am335x_evm: failed to boot via USB   Matwey V. Kornilov
• [PATCH 11/11] Remove including timestamp.h in version.h   Sean Anderson
• [PATCH 11/11] Remove including timestamp.h in version.h   Pali Rohár
• [PATCH 11/11] Remove including timestamp.h in version.h   Pali Rohár
• [PATCH] Nokia RX-51: Convert documentation to rst format   Pali Rohár
• [PATCH 11/11] Remove including timestamp.h in version.h   Tom Rini
• [PATCH 11/11] Remove including timestamp.h in version.h   Pali Rohár
• [PATCH 11/11] Remove including timestamp.h in version.h   Tom Rini
• [PATCH 11/11] Remove including timestamp.h in version.h   Pali Rohár
• am335x_evm: failed to boot via USB   Tom Rini
• [PATCH] fit: Fix verification of images with external data   Tom Rini
• [PATCH] fs/squashfs: Fix some hardlinks reading the wrong inode   Tom Rini
• [PATCH] cmd:(cosmetic)Mentioned in 'chpart' command HELP text that it is for MTD devices   Tom Rini
• [PATCH v2] cmd:Elaborate 'blkcache' cmd HELP statement   Tom Rini
• [PATCH] doc: Add basic information about running CI tests   Tom Rini
• [PATCH 1/1] config: MPC8548CDS: eliminate symbol CONFIG_SYS_ID_EEPROM   Tom Rini
• list of Ethernet Phys supported by uboot   Boris Genow
• [PATCH] test/py: tpm2: Skip tpm pytest based on env variable   T Karthik Reddy
• [PATCH] tools: add fdt_add_pubkey   Rasmus Villemoes
• [PATCH] tools: add fdt_add_pubkey   Roman Kopytin
• am335x_evm: failed to boot via USB   Matwey V. Kornilov
• [PATCH v7 0/6] rockchip_sfc: add support for Rockchip SFC   Jon Lin
• [PATCH v7 1/6] spi: rockchip_sfc: add support for Rockchip SFC   Jon Lin
• [PATCH v7 2/6] rockchip: px30: Add support for using SFC   Jon Lin
• [PATCH v7 3/6] rockchip: px30: add the serial flash controller   Jon Lin
• [PATCH v7 4/6] mtd: spi-nor-ids: Add XTX XT25F128B   Jon Lin
• [PATCH v7 5/6] rockchip: px30: add support for SFC for Odroid Go Advance   Jon Lin
• [PATCH v7 6/6] rockchip: px30: Support configure SFC   Jon Lin
• [PATCH v7 1/6] spi: rockchip_sfc: add support for Rockchip SFC   Jagan Teki
• [PATCH v7 3/6] rockchip: px30: add the serial flash controller   Jagan Teki
• [PATCH v7 4/6] mtd: spi-nor-ids: Add XTX XT25F128B   Jagan Teki
• [PATCH v7 6/6] rockchip: px30: Support configure SFC   Jagan Teki
• am335x_evm: failed to boot via USB   Matwey V. Kornilov
• [PATCH 1/4] EFI: console: query_vidconsole: multiplex adaptation   Heinrich Schuchardt
• [PATCH 3/4] EFI: console: max rows and cols user limit   Heinrich Schuchardt
• [PATCH 4/4] EFI: console: improve vidconsole unicode output   Heinrich Schuchardt
• [PATCH 3/5] arm: dts: stm32mp157c-odyssey-som: set the SDMMC2 VQMMC supply   Grzegorz Szymaszek
• [PATCH] tiny-printf: Handle %pM format when CONFIG_SPL_NET_SUPPORT is enabled   Matwey V. Kornilov
• [PATCH] test/py: tpm2: Skip tpm pytest based on env variable   Tom Rini
• Nvidia/Cuda on ARM using U-Boot   Benjamin Krill
• [PATCH 0/9] meson64_android: Android boot flow using abootimg   Mattijs Korpershoek
• [PATCH 1/9] configs: meson64: permit redefining SYS_MALLOC_LEN   Mattijs Korpershoek
• [PATCH 2/9] configs: meson64_android: increase SYS_MALLOC_LEN to 128M for AVB   Mattijs Korpershoek
• [PATCH 3/9] configs: meson64_android: implement AVB support   Mattijs Korpershoek
• [PATCH 4/9] configs: meson64_android: implement A/B slot support   Mattijs Korpershoek
• [PATCH 5/9] configs: meson64_android: define BOOT_CMD macro   Mattijs Korpershoek
• [PATCH 6/9] configs: meson64_android: boot android via abootimg   Mattijs Korpershoek
• [PATCH 7/9] configs: sei510/sei610: reformat PARTS_default   Mattijs Korpershoek
• [PATCH 8/9] configs: sei510/sei610: don't use hard-coded gpt uuids   Mattijs Korpershoek
• [PATCH 9/9] configs: sei510/610: android bootflow via abootimg   Mattijs Korpershoek
• [PATCH v2 0/3] efi: Minimal revert to rodata change   Heinrich Schuchardt
• [PATCH v7 3/6] rockchip: px30: add the serial flash controller   Chris Morgan
• Building htmldocs   Simon Glass
• [PATCH v2 0/3] efi: Minimal revert to rodata change   Simon Glass
• Building htmldocs   Heinrich Schuchardt
• Building htmldocs   Tom Rini
• Building htmldocs   Simon Glass
• Building htmldocs   Tom Rini
• Building htmldocs   Simon Glass
• [PATCH v7 1/6] spi: rockchip_sfc: add support for Rockchip SFC   Chris Morgan
• [PATCH 1/9] configs: meson64: permit redefining SYS_MALLOC_LEN   Neil Armstrong
• [PATCH 2/9] configs: meson64_android: increase SYS_MALLOC_LEN to 128M for AVB   Neil Armstrong
• [PATCH 3/9] configs: meson64_android: implement AVB support   Neil Armstrong
• [PATCH 4/9] configs: meson64_android: implement A/B slot support   Neil Armstrong
• [PATCH 5/9] configs: meson64_android: define BOOT_CMD macro   Neil Armstrong
• [PATCH 6/9] configs: meson64_android: boot android via abootimg   Neil Armstrong
• [PATCH 7/9] configs: sei510/sei610: reformat PARTS_default   Neil Armstrong
• [PATCH 8/9] configs: sei510/sei610: don't use hard-coded gpt uuids   Neil Armstrong
• [PATCH 9/9] configs: sei510/610: android bootflow via abootimg   Neil Armstrong
• [PATCH] tiny-printf: Handle %pM format when CONFIG_SPL_NET_SUPPORT is enabled   Simon Glass
• Building htmldocs   Tom Rini
• [PATCH 0/2] rockchip: board: Fix bug for clk driver for OGA   Chris Morgan
• [PATCH 1/2] rockchip: px30: add support for setting cpll clock   Chris Morgan
• [PATCH 2/2] rockchip: board: remove SCLK_GPU from U-Boot DT   Chris Morgan
• [PATCH 1/9] configs: meson64: permit redefining SYS_MALLOC_LEN   Tom Rini
• [PATCH 0/9] meson64_android: Android boot flow using abootimg   Tom Rini
• [PATCH v7 5/6] rockchip: px30: add support for SFC for Odroid Go Advance   Chris Morgan
• [PATCH v2] tiny-printf: Handle %pM format when CONFIG_SPL_NET_SUPPORT is enabled   Matwey V. Kornilov
• [PATCH v3 2/3] arm: Add an __image_copy_start symbol for ARMv8   Simon Glass
• Proposal: U-Boot MTD (rewriting old story)   Simon Glass
• [PATCH v2] tiny-printf: Handle %pM format when CONFIG_SPL_NET_SUPPORT is enabled   Simon Glass
• Proposal: U-Boot MTD (rewriting old story)   Tom Rini
• tiny-printf: endless loop for %llu format   Matwey V. Kornilov
• U-Boot Digest, Vol 158, Issue 63   Tom Rini
• [PATCH] display_options: Do not use %llu in print_size   Matwey V. Kornilov
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Marek Vasut
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Marek Vasut
• Please pull u-boot-video   Anatolij Gustschin
• [PATCH 1/1] efi_loader: Uri() device path node   Heinrich Schuchardt
• [PATCH 0/2] doc: update Sphinx build system   Heinrich Schuchardt
• [PATCH 1/2] doc: require Sphinx 2.44   Heinrich Schuchardt
• [PATCH 2/2] doc: fix Latex margins   Heinrich Schuchardt
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Marek Vasut
• [PATCH 2/2] doc: fix Latex margins   Tom Rini
• [PATCH 1/1] cmd/part: correct alignment of partition list   Heinrich Schuchardt
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Tom Rini
• [PATCH v2 13/32] pci: usb: Drop DM_PCI from ohci   Tom Rini
• [PATCH v2 0/3] efi: Minimal revert to rodata change   KASHI Takahiro
• [PATCH v2 0/3] efi: Minimal revert to rodata change   Simon Glass
• Proposal: U-Boot MTD (rewriting old story)   Bin Meng
• [PATCH v2 2/6] efi_loader: add secure boot variable measurement   Masahisa Kojima
• [PATCH v1 0/2] imx8m: fix secure boot   Heiko Schocher
• [PATCH v1 1/2] spl_fit. add hook to make fixes after fit header is loaded   Heiko Schocher
• [PATCH v1 2/2] imx: spl: implement spl_load_simple_fit_fix_load   Heiko Schocher
• [PATCH 0/3] common: Add fdt network helper   Tony Dinh
• [PATCH 1/3] Add fdt network helper header file   Tony Dinh
• [PATCH 2/3] Add fdt network helper functions   Tony Dinh
• [PATCH 3/3] Add fdt network helper to Makefile   Tony Dinh
• [PATCH v1 0/2] imx8m: fix secure boot   Peng Fan (OSS)
• [PATCH v1 0/2] imx8m: fix secure boot   Heiko Schocher
• [PATCH] video: Hitachi panel: Drop bogus dependency on CONFIG_VIDEO   Anatolij Gustschin
• [PATCH] video: Add simple driver for ST-Ericsson MCDE with pre-configured display   Anatolij Gustschin
• [PATCH v3 0/5] add measurement support   Masahisa Kojima
• [PATCH v3 1/5] efi_loader: add secure boot variable measurement   Masahisa Kojima
• [PATCH v3 2/5] efi_loader: add boot variable measurement   Masahisa Kojima
• [PATCH v3 3/5] efi_loader: add ExitBootServices() measurement   Masahisa Kojima
• [PATCH v3 4/5] efi_loader: refactor efi_append_scrtm_version()   Masahisa Kojima
• [PATCH v3 5/5] efi_loader: add comment for efi_tcg2.h   Masahisa Kojima
• [EXT] Re: [PATCH v1 0/2] imx8m: fix secure boot   Ye Li
• [PATCH] arm64: zynqmp: Disable WDT_CDNS driver by default   Michal Simek
• [PATCH] xilinx: zynqmp: Free allocated field for target variable   Michal Simek
• [PATCH v2 0/4] xilinx: zynqmp: Add support for dfu_alt_info setup at runtime   Michal Simek
• [PATCH v5 0/7] Arasan sdhci driver updates   Michal Simek
• [PATCH] firmware: xilinx: Use explicit values for all enum values   Michal Simek
• [PATCH 1/4] EFI: console: query_vidconsole: multiplex adaptation   Art Nikpal
• [PATCH] reset: zynqmp: Add reset controller for ZynqMP SoC   Michal Simek
• [PATCH 0/4] xilinx: Add RTC support for Xilinx ZynqMP   Michal Simek
• [PATCH 4/4] EFI: console: improve vidconsole unicode output   Art Nikpal
• [PATCH 1/9] configs: meson64: permit redefining SYS_MALLOC_LEN   Neil Armstrong
• [PATCH 0/9] meson64_android: Android boot flow using abootimg   Neil Armstrong
• [PATCH 3/4] EFI: console: max rows and cols user limit   Art Nikpal
• [PATCH 1/9] configs: meson64: permit redefining SYS_MALLOC_LEN   Mattijs Korpershoek
• [EXT] Re: Problem on imx: add rom api support on imx8mn   Michael Nazzareno Trimarchi
• [PATCH] tools: add fdt_add_pubkey   Rasmus Villemoes
• [EXT] Re: Problem on imx: add rom api support on imx8mn   Peng Fan (OSS)
• [BISECTED] arm: dts: Resync BeagleBone device trees   Matwey V. Kornilov
• [PATCH v2 6/6] board: apalis-tk1: launch toradex easy installer in usb recovery   Stefano Babic
• [PATCH] arm64: zynqmp: Fix node name for ds35/36 leds   Michal Simek
• [PATCH] arm64: zynqmp: Fix header alignment on kv260 boards   Michal Simek
• [PATCH] arm64: zynqmp: Update comment style sm-k26   Michal Simek
• [PATCH] xilinx: Add jedec compatible string for QSPI (Zynq/ZynqMP)   Michal Simek
• [PATCH] tools: add fdt_add_pubkey   Steffen Jaeckel
• [PATCH] ARM: zynq: Replace 'io-standard' with 'power-source' property   Michal Simek
• [PATCH] ARM: zynq: Wire single qspi on couple of boards   Michal Simek
• [PATCH] ARM: zynq: Enable smcc and nor for zc770-xm012   Michal Simek
• [BISECTED] arm: dts: Resync BeagleBone device trees   Harald Seiler
• [BISECTED] arm: dts: Resync BeagleBone device trees   Peter Robinson
• [BISECTED] arm: dts: Resync BeagleBone device trees   Matwey V. Kornilov
• [PATCH 2/8] clock_imx8mm: Add enable_usboh3_clk() for i.MX8M   Stefano Babic
• [BISECTED] arm: dts: Resync BeagleBone device trees   Harald Seiler
• [PATCH] xilinx: Disable ARCH_FIXUP_FDT_MEMORY   Michal Simek
• [PATCH 1/9] configs: meson64: permit redefining SYS_MALLOC_LEN   Tom Rini
• [PATCH v2 23/32] pci: arm: mvebu: Drop DM_PCI check from   Tom Rini
• [PATCH v2 25/32] distro_bootcmd: Drop DM_PCI check   Tom Rini
• [PATCH 1/9] configs: meson64: permit redefining SYS_MALLOC_LEN   Tom Rini
• [PATCH v1 0/5] arm64: Add optimized memset/memcpy functions   Stefan Roese
• [PATCH v1 1/5] lib/string: Add memset_simple()   Stefan Roese
• [PATCH v1 2/5] board_init: Use memset_simple() in board_init_f_init_reserve()   Stefan Roese
• [PATCH v1 3/5] arm64: cache_v8: Use memset_simple() in create_table()   Stefan Roese
• [PATCH v1 4/5] arm64: arch/arm/lib: Add optimized memset/memcpy functions   Stefan Roese
• [PATCH v1 5/5] arm64: Kconfig: Enable usage of optimized memset/memcpy   Stefan Roese
• [PATCH V4 00/44] imx: add i.MX8ULP support   Stefano Babic
• [PATCH v1 0/5] arm64: Add optimized memset/memcpy functions   Tom Rini
• [PATCH v1 4/5] arm64: arch/arm/lib: Add optimized memset/memcpy functions   Tom Rini
• [PATCH v1 0/5] arm64: Add optimized memset/memcpy functions   Stefan Roese
• [PATCH v1 4/5] arm64: arch/arm/lib: Add optimized memset/memcpy functions   Stefan Roese
• [BISECTED] arm: dts: Resync BeagleBone device trees   Matwey V. Kornilov
• [PATCH v1 1/5] lib/string: Add memset_simple()   Wolfgang Denk
• [PATCH 0/9] meson64_android: Android boot flow using abootimg   Mattijs Korpershoek
• [PATCH v1 4/5] arm64: arch/arm/lib: Add optimized memset/memcpy functions   Wolfgang Denk
• [PATCH 0/9] meson64_android: Android boot flow using abootimg   Tom Rini
• [PATCH] loadb: Properly indicate aborted kermit transfer   Pali Rohár
• [PATCH v1 1/5] lib/string: Add memset_simple()   Heinrich Schuchardt
• [PATCH 6/7] xyz-modem: Show information about finished transfer   Pali Rohár
• [PATCH 3/7] xyz-modem: Put xyzModem_stream_close debug diagnostic message into ZM_DEBUG()   Pali Rohár
• [PATCH] loadb: Properly indicate aborted kermit transfer   Heinrich Schuchardt
• [PATCH 4/7] xyz-modem: Close stream after processing/sending terminate sequence   Pali Rohár
• [PATCH] loadb: Properly indicate aborted kermit transfer   Pali Rohár
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Tom Rini
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Tom Rini
• [PATCH] display_options: Do not use %llu in print_size   Simon Glass
• [PATCH] xilinx: Disable ARCH_FIXUP_FDT_MEMORY   Tom Rini
• [PATCH v2 01/32] pci: Drop old code from pci command   Tom Rini
• [PATCH v2 04/32] pci: Remove guard around compatibility functions   Tom Rini
• [PATCH v2 06/32] pci: Drop DM_PCI check from pci_common   Tom Rini
• [PATCH v2 07/32] ppc: Drop CONFIG_SYS_PCI_SUBSYS_VENDORID   Tom Rini
• [PATCH v2 08/32] pci: powerpc: Drop old code   Tom Rini
• [PATCH v2 09/32] pci: freescale: Drop old code   Tom Rini
• [PATCH v2 10/32] pci: dm: core: Drop DM_PCI check from devfdt_get_addr_pci()   Tom Rini
• [PATCH v2 11/32] ppc: Drop DM_PCI from config files   Tom Rini
• [PATCH v2 13/32] pci: usb: Drop DM_PCI from ohci   Tom Rini
• [PATCH v2 14/32] ppc: malta: Drop use of DM_PCI   Tom Rini
• [PATCH v2 15/32] ppc: socrates: Drop use of DM_PCI   Tom Rini
• [PATCH v2 16/32] pci: gt64120: Drop use of DM_PCI   Tom Rini
• [PATCH v2 17/32] pci: msc01: Drop use of DM_PCI   Tom Rini
• [PATCH v2 18/32] pci: imx: Drop use of DM_PCI   Tom Rini
• [PATCH v2 19/32] pci: scsi: pci: Drop DM_PCI check from scsi   Tom Rini
• [PATCH v2 20/32] pci: Drop DM_PCI check from bios_emul   Tom Rini
• [PATCH v2 22/32] pci: imx: Drop DM_PCI check from cpu driver   Tom Rini
• [PATCH v2 23/32] pci: arm: mvebu: Drop DM_PCI check from   Tom Rini
• [PATCH v2 24/32] pci: sata_sil: Drop DM_PCI checks   Tom Rini
• [PATCH v2 25/32] distro_bootcmd: Drop DM_PCI check   Tom Rini
• [PATCH v2 26/32] pci: Drop pci_init_board()   Tom Rini
• [PATCH v2 27/32] pci: ppc: Drop ftpci100 driver   Tom Rini
• [PATCH v2 28/32] ppc: Drop idt8t49n222a_serdes_clk driver   Tom Rini
• [PATCH v2 29/32] ppc: Drop t4qds and b4860qds references   Tom Rini
• [PATCH v2 32/32] pci: Drop migration method   Tom Rini
• Please pull u-boot-video   Tom Rini
• [PATCH 1/2] Makefile: Create a file to indicate the config   Simon Glass
• [PATCH 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR   Simon Glass
• [PATCH 1/3] mtd: kconfig: Fix CFI_FLASH dependency   Bin Meng
• [PATCH 2/3] flash.h: Remove CONFIG_SYS_FLASH_CFI from flash_info_t   Bin Meng
• [PATCH 3/3] riscv: qemu: Enable MTD NOR flash support   Bin Meng
• [PATCH 3/4] EFI: console: max rows and cols user limit   Heinrich Schuchardt
• [PATCH V4 00/44] imx: add i.MX8ULP support   Peng Fan (OSS)
• [PATCH V5 00/44] imx: add i.MX8ULP support   Peng Fan (OSS)
• [PATCH V5 01/44] arm: imx: add i.MX8ULP basic Kconfig option   Peng Fan (OSS)
• [PATCH V5 02/44] arm: imx: add i.MX8ULP cpu type and helper   Peng Fan (OSS)
• [PATCH V5 03/44] arm: imx: sys_proto: move boot mode define to common header   Peng Fan (OSS)
• [PATCH V5 04/44] arm: imx8ulp: support print cpu info   Peng Fan (OSS)
• [PATCH V5 05/44] imx: imx8ulp: add get reset cause   Peng Fan (OSS)
• [PATCH V5 06/44] arm: imx: basic i.MX8ULP support   Peng Fan (OSS)
• [PATCH V5 07/44] arm: imx8: Move container parser and image to mach-imx common folder   Peng Fan (OSS)
• [PATCH V5 08/44] arm: imx8: Move container image header file to mach-imx   Peng Fan (OSS)
• [PATCH V5 09/44] arm: imx: parse-container: guard included header files   Peng Fan (OSS)
• [PATCH V5 10/44] arm: imx8ulp: add container support   Peng Fan (OSS)
• [PATCH V5 11/44] arm: imx: move container Kconfig under mach-imx   Peng Fan (OSS)
• [PATCH V5 12/44] driver: misc: Add MU and S400 API to communicate with Sentinel   Peng Fan (OSS)
• [PATCH V5 13/44] net: fec_mxc: support i.MX8ULP   Peng Fan (OSS)
• [PATCH V5 14/44] pinctrl: Add pinctrl driver for imx8ulp   Peng Fan (OSS)
• [PATCH V5 15/44] driver: serial: fsl_lpuart: support i.MX8ULP   Peng Fan (OSS)
• [PATCH V5 16/44] arm: imx8ulp: add clock support   Peng Fan (OSS)
• [PATCH V5 17/44] drivers: mmc: fsl_esdhc_imx: support i.MX8ULP   Peng Fan (OSS)
• [PATCH V5 18/44] arm: imx8ulp: soc: Change to use CMC1 to get bootcfg   Peng Fan (OSS)
• [PATCH V5 19/44] arm: imx8ulp: Enable full L2 cache in SPL   Peng Fan (OSS)
• [PATCH V5 20/44] arm: imx8ulp: disable wdog3   Peng Fan (OSS)
• [PATCH V5 21/44] arm: imx8ulp: Update the reset vector in u-boot   Peng Fan (OSS)
• [PATCH V5 22/44] drivers: misc: s400_api: Update S400_SUCCESS_IND to 0xd6   Peng Fan (OSS)
• [PATCH V5 23/44] drivers: misc: imx8ulp: Add S400 API for image authentication   Peng Fan (OSS)
• [PATCH V5 24/44] drivers: misc: imx8ulp: Update S400 API for release RDC   Peng Fan (OSS)
• [PATCH V5 25/44] drivers: misc: s400_api: Update API for fuse read and write   Peng Fan (OSS)
• [PATCH V5 26/44] arm: imx8ulp: release and configure XRDC at early phase   Peng Fan (OSS)
• [PATCH V5 27/44] arm: imx8ulp: add rdc support   Peng Fan (OSS)
• [PATCH V5 28/44] arm: imx8ulp: add trdc release request   Peng Fan (OSS)
• [PATCH V5 29/44] arm: imx8ulp: release trdc and assign lpav from RTD to APD   Peng Fan (OSS)
• [PATCH V5 30/44] imx8ulp: unify rdc functions   Peng Fan (OSS)
• [PATCH V5 31/44] arm: imx8ulp: Probe the S400 MU device in arch init   Peng Fan (OSS)
• [PATCH V5 32/44] arm: iMX8ULP: Add boot device relevant functions   Peng Fan (OSS)
• [PATCH V5 33/44] arm: imx8ulp: Allocate DCNANO and MIPI_DSI to AD domain   Peng Fan (OSS)
• [PATCH V5 34/44] arm: imx8ulp: add dummy imx_get_mac_from_fuse   Peng Fan (OSS)
• [PATCH V5 35/44] arm: imx8ulp: add iomuxc support   Peng Fan (OSS)
• [PATCH V5 36/44] driver: misc: imx8ulp: Add fuse driver for imx8ulp   Peng Fan (OSS)
• [PATCH V5 37/44] imx8ulp: soc: correct reset cause   Peng Fan (OSS)
• [PATCH V5 38/44] imx8ulp: Use DGO_GP5 to get boot config   Peng Fan (OSS)
• [PATCH V5 39/44] imx8ulp: Add workaround for eMMC boot   Peng Fan (OSS)
• [PATCH V5 40/44] imx8ulp: move struct mu_type to common header   Peng Fan (OSS)
• [PATCH V5 41/44] imx8ulp: add upower api support   Peng Fan (OSS)
• [PATCH V5 42/44] ddr: Add DDR driver for iMX8ULP   Peng Fan (OSS)
• [PATCH V5 43/44] arm: dts: add i.MX8ULP dtsi   Peng Fan (OSS)
• [PATCH V5 44/44] arm: imx: add i.MX8ULP EVK support   Peng Fan (OSS)
• [PATCH] imx: cmd: use struct cmd_tbl   Peng Fan (OSS)
• [PATCH] am33xx: Fix USB for am335x boards   Matwey V. Kornilov
• [PATCH] am33xx: Fix USB for am335x boards   Paul Barker
• [PATCH 0/7] Enable new drivers added for U-Boot 2021.10 in "stemmy" board   Stephan Gerhold
• [PATCH 1/7] MAINTAINERS: Add new drivers for ARM U8500   Stephan Gerhold
• [PATCH 2/7] arm: u8500: Imply options for new drivers   Stephan Gerhold
• [PATCH 3/7] arm: dts: u8500: Update from Linux ux500-dts-for-v5.15   Stephan Gerhold
• [PATCH 4/7] arm: dts: u8500: u-boot: Add fixed clock for eMMC   Stephan Gerhold
• [PATCH 5/7] board: stemmy: Add basic Fastboot support   Stephan Gerhold
• [PATCH 6/7] board: stemmy: Update documentation   Stephan Gerhold
• [PATCH 7/7] arm: u8500: Prefer building in thumb mode by default   Stephan Gerhold
• [PATCH 00/12] dm: Expand of-platdata support to GPIOs and clean up   Simon Glass
• [PATCH 01/12] treewide: fdt: Move fdt_get_config_... to ofnode_conf_read...   Simon Glass
• [PATCH 02/12] fdt: Create a new OF_REAL Kconfig   Simon Glass
• [PATCH 03/12] treewide: Simply conditions with the new OF_REAL   Simon Glass
• [PATCH 04/12] treewide: Use OF_REAL instead of !OF_PLATDATA   Simon Glass
• [PATCH 05/12] mmc: nds32: ftsdc010: Convert to livetree   Simon Glass
• [PATCH 06/12] treewide: Try to avoid the preprocessor with OF_REAL   Simon Glass
• [PATCH 07/12] fdt: Update Makefile rules with the new OF_REAL Kconfig   Simon Glass
• [PATCH 08/12] dm: Add comments to dt-structs contents   Simon Glass
• [PATCH 09/12] clk: Rename clk_get_by_driver_info()   Simon Glass
• [PATCH 10/12] dm: doc: Add a note about of-platdata header files   Simon Glass
• [PATCH 11/12] irq: Tidy up of-platdata irq support   Simon Glass
• [PATCH 12/12] dm: gpio: Add of-platdata support   Simon Glass
• [PATCH v2 00/32] pci: Drop all pre-driver model code   Simon Glass
• [PATCH v2 00/32] pci: Drop all pre-driver model code   Tom Rini
• [PATCH v2 00/32] pci: Drop all pre-driver model code   Simon Glass
• [PATCH v1 1/5] lib/string: Add memset_simple()   Wolfgang Denk
• [PATCH v1 1/5] lib/string: Add memset_simple()   Tom Rini
• [PATCH] am335x_evm_defconfig: Disable CMD_BOOTEFI_BOOTMGR   Matwey V. Kornilov
• [PATCH] am335x_evm_defconfig: Disable CMD_BOOTEFI_BOOTMGR   Tom Rini
• RFC: Support for U-Boot phases in Kconfig   Simon Glass
• [PATCH 0/7] Enable new drivers added for U-Boot 2021.10 in "stemmy" board   Linus Walleij
• [PATCH v2] powerpc: mpc: Put U-Boot version string at correct place by linker script   Pali Rohár
• [PATCH v2] powerpc: mpc: Put U-Boot version string at correct place by linker script   Pali Rohár
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Marek Vasut
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Marek Vasut
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Tom Rini
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Marek Vasut
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Tom Rini
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Marek Vasut
• [PATCH v1] imx: mkimage_fit_atf: replace @ with hyphen   Heiko Thiery
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Tom Rini
• [PATCH 00/23] Makefile: Continue simplifying Makefile rules (Part B)   Simon Glass
• [PATCH 01/23] mmc: Rename MMC_SUPPORT to MMC   Simon Glass
• [PATCH 02/23] pch: Rename PCH_SUPPORT to PCH   Simon Glass
• [PATCH 03/23] rtc: Rename RTC_SUPPORT to RTC   Simon Glass
• [PATCH 04/23] serial: Rename SERIAL_SUPPORT to SERIAL   Simon Glass
• [PATCH 05/23] serial: Add a SERIAL config   Simon Glass
• [PATCH 06/23] spi: Rename SPI_SUPPORT to SPI   Simon Glass
• [PATCH 07/23] Rename CACHE_SUPPORT to CACHE   Simon Glass
• [PATCH 08/23] ppc: Rename MPC8XXX_INIT_DDR_SUPPORT to MPC8XXX_INIT_DDR   Simon Glass
• [PATCH 09/23] sata: Rename SATA_SUPPORT to SATA   Simon Glass
• [PATCH 10/23] Makefile: Unify the rules for BOOTCOUNT_LIMIT   Simon Glass
• [PATCH 11/23] dma: Add a Kconfig for legacy DMA   Simon Glass
• [PATCH 12/23] ti: Convert CONFIG_TI_EDMA3 to Kconfig   Simon Glass
• [PATCH 13/23] Convert CONFIG_DMA_LPC32XX to Kconfig   Simon Glass
• [PATCH 14/23] Makefile: Move drivers/dma/ into drivers/Makefile   Simon Glass
• [PATCH 15/23] tegra: gpio: Drop use of CONFIG_xxx variables   Simon Glass
• [PATCH 16/23] gpio: Add a GPIO config   Simon Glass
• [PATCH 17/23] power: Tidy up #undef of CONFIG_DM_PMIC   Simon Glass
• [PATCH 18/23] power: Rename CONFIG_POWER to CONFIG_POWER_LEGACY   Simon Glass
• [PATCH 19/23] i2c: Convert CONFIG_POWER_I2C et al to Kconfig   Simon Glass
• [PATCH 20/23] power: Add a POWER config   Simon Glass
• [PATCH 21/23] power: Refactor Makefile rules   Simon Glass
• [PATCH 22/23] net: Rename SPL_NET_SUPPORT to SPL_NET   Simon Glass
• [PATCH 23/23] net: Move network rules to drivers/net   Simon Glass
• [PULL] u-boot-sh/master   Tom Rini
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Tom Rini
• [PATCH] dtoc: Correct the intarray-widening test case   Simon Glass
• [PATCH] patman: Avoid blank lines between tags   Simon Glass
• [PATCH] dm: core: Don't allow uclass use before ready   Simon Glass
• [PATCH] dm: migrate the dm_warn to use the log macro   Simon Glass
• Please pull u-boot-dm   Simon Glass
• [PATCH 05/12] mmc: nds32: ftsdc010: Convert to livetree   Rick Chen
• [PATCH] xilinx: Disable ARCH_FIXUP_FDT_MEMORY   Michal Simek
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Wolfgang Denk
• [v5 00/17] Add Intel N5X SoC support   Siew Chin Lim
• [v5 01/17] arm: socfpga: Move linux_qspi_enable from bootcommand to board_prep_linux function   Siew Chin Lim
• [v5 02/17] arm: socfpga: Changed base_addr_s10.h to base_addr_soc64.h   Siew Chin Lim
• [v5 03/17] arm: socfpga: Add base address for Intel N5X device   Siew Chin Lim
• [v5 04/17] arm: socfpga: Add handoff data support for Intel N5X device   Siew Chin Lim
• [v5 05/17] drivers: clk: Add clock driver for Intel N5X device   Siew Chin Lim
• [v5 06/17] arm: socfpga: Get clock manager base address for Intel N5X device   Siew Chin Lim
• [v5 07/17] drivers: clk: Add memory clock driver for Intel N5X device   Siew Chin Lim
• [v5 08/17] arm: socfpga: Move cm_get_mpu_clk_hz function declaration to clock_manager.h   Siew Chin Lim
• [v5 09/17] arm: socfpga: Add clock manager for Intel N5X device   Siew Chin Lim
• [v5 10/17] arm: socfpga: Changed misc_s10.c to misc_soc64.c   Siew Chin Lim
• [v5 11/17] ddr: socfpga: Enable memory test on memory size less than 1GB   Siew Chin Lim
• [v5 12/17] ddr: altera: Add SDRAM driver for Intel N5X device   Siew Chin Lim
• [v5 13/17] arm: socfpga: Add SPL for Intel N5X device   Siew Chin Lim
• [v5 14/17] board: intel: Add socdk board support for Intel N5X device   Siew Chin Lim
• [v5 15/17] arm: dts: Add base dtsi and devkit dts for Intel N5X device   Siew Chin Lim
• [v5 16/17] include: configs: Add Intel N5X device CONFIGs   Siew Chin Lim
• [v5 17/17] arm: socfpga: Enable Intel N5X device build   Siew Chin Lim
• [EXT] Re: [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Ye Li
• [PATCH v1 2/5] board_init: Use memset_simple() in board_init_f_init_reserve()   Rasmus Villemoes
• [PATCH] arm: a37xx: pci: Fix handling PIO config error responses   Pali Rohár
• [PATCH V5 00/44] imx: add i.MX8ULP support   Stefano Babic
• [PATCH 5/5] ARM: board: warp7: Minor cleanups and DM_ETH   Stefano Babic
• [PATCH] ARM: dts: stm32: Reduce DHCOR SPI NOR frequency to 50 MHz   Marek Vasut
• [PATCH] ARM: stm32: Set environment sector size to 4k on DHSOM   Marek Vasut
• [PATCH] ARM: dts: stm32: Reduce DHCOR SPI NOR frequency to 50 MHz   Patrice CHOTARD
• [PATCH] ARM: stm32: Set environment sector size to 4k on DHSOM   Patrice CHOTARD
• [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Tom Rini
• Pull request: u-boot-imx u-boot-imx-20210809   Stefano Babic
• [PATCH] lib: add crc16.o if CONFIG_MMC_SPI_CRC_ON for SPL build   Andreas Schwab
• [EXT] Re: [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Tom Rini
• [PATCH v1 2/5] board_init: Use memset_simple() in board_init_f_init_reserve()   Stefan Roese
• [EXT] Re: [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Wolfgang Denk
• [EXT] Re: [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"   Tom Rini
• [PATCH] arm: mvebu: Hang if ddr3_init() fails   Pali Rohár
• [PATCH v2 0/3] efi: Minimal revert to rodata change   Tom Rini
• [PATCH] xilinx: Disable ARCH_FIXUP_FDT_MEMORY   Tom Rini
• [PATCH 09/12] clk: Rename clk_get_by_driver_info()   Sean Anderson
• [PATCH] arm: dts: k3-am642-evm-u-boot: Add u-boot, dm-spl tag in the pinmux node of mmc1   Aswath Govindraju
• Please pull u-boot-dm   Tom Rini
• Pull request: u-boot-imx u-boot-imx-20210809   Tom Rini
• RFC: Support for U-Boot phases in Kconfig   Tom Rini
• RFC: Support for U-Boot phases in Kconfig   Sean Anderson
• [PATCH v3 1/5] efi_loader: add secure boot variable measurement   AKASHI Takahiro
• [PATCH v3 2/5] efi_loader: add boot variable measurement   AKASHI Takahiro
• [PATCH 0/1] rtc: ds1307: Fix incorrect clock reset for DS13xx   Callum Sinclair
• [PATCH 1/1] rtc: ds1307: Fix incorrect clock reset for DS13xx   Callum Sinclair
• [v6 00/17] Add Intel N5X SoC support   Siew Chin Lim
• [v6 01/17] arm: socfpga: Move linux_qspi_enable from bootcommand to board_prep_linux function   Siew Chin Lim
• [v6 02/17] arm: socfpga: Changed base_addr_s10.h to base_addr_soc64.h   Siew Chin Lim
• [v6 03/17] arm: socfpga: Add base address for Intel N5X device   Siew Chin Lim
• [v6 04/17] arm: socfpga: Add handoff data support for Intel N5X device   Siew Chin Lim
• [v6 05/17] drivers: clk: Add clock driver for Intel N5X device   Siew Chin Lim
• [v6 06/17] arm: socfpga: Get clock manager base address for Intel N5X device   Siew Chin Lim
• [v6 07/17] drivers: clk: Add memory clock driver for Intel N5X device   Siew Chin Lim
• [v6 08/17] arm: socfpga: Move cm_get_mpu_clk_hz function declaration to clock_manager.h   Siew Chin Lim
• [v6 09/17] arm: socfpga: Add clock manager for Intel N5X device   Siew Chin Lim
• [v6 10/17] arm: socfpga: Changed misc_s10.c to misc_soc64.c   Siew Chin Lim
• [v6 11/17] ddr: socfpga: Enable memory test on memory size less than 1GB   Siew Chin Lim
• [v6 12/17] ddr: altera: Add SDRAM driver for Intel N5X device   Siew Chin Lim
• [v6 13/17] arm: socfpga: Add SPL for Intel N5X device   Siew Chin Lim
• [v6 14/17] board: intel: Add socdk board support for Intel N5X device   Siew Chin Lim
• [v6 15/17] arm: dts: Add base dtsi and devkit dts for Intel N5X device   Siew Chin Lim
• [v6 16/17] include: configs: Add Intel N5X device CONFIGs   Siew Chin Lim
• [v6 17/17] arm: socfpga: Enable Intel N5X device build   Siew Chin Lim
• [PATCH v2 1/6] cache: add sifive composable cache driver   Sean Anderson
• [PATCH v2 3/6] riscv: lib: introduce cache_init interface   Sean Anderson
• [PATCH v2 2/6] board: sifive: use ccache driver instead of helper function   Sean Anderson
• [PATCH v2 5/6] riscv: lib: move platform-related libraries to sperate folder   Sean Anderson
• [PATCH v2 6/6] riscv: lib: modify the indent   Sean Anderson
• [PATCH 0/6] Cortina Firmware fixes   Kuldeep Singh
• [PATCH 1/6] env: Kconfig: Add default option for PHY_CORTINA   Kuldeep Singh
• [PATCH 2/6] configs: Migrate CORTINA_FW_ADDR and CORTINA_FW_LENGTH to Kconfig   Kuldeep Singh
• [PATCH 3/6] net: cortina: Add support for tfa boot in cortina firmware   Kuldeep Singh
• [PATCH 4/6] board: ls2088ardb: Extend cs4340_get_fw_addr() functionality   Kuldeep Singh
• [PATCH 5/6] board: t208x: Extend cs4340_get_fw_addr() functionality   Kuldeep Singh
• [PATCH 6/6] board: T4240rdb: Extend cs4340_get_fw_addr() functionality   Kuldeep Singh
• [PATCH] arm: kirkwood: Dockstar: Update board maintainer   Tony Dinh
• [PATCH v2 2/6] board: sifive: use ccache driver instead of helper function   Zong Li
• [PATCH] arm: kirkwood: Goflex Home: Update board maintainer   Tony Dinh
• [PATCH v2 3/6] riscv: lib: introduce cache_init interface   Zong Li
• [PATCH v2 5/6] riscv: lib: move platform-related libraries to sperate folder   Zong Li
• [PATCH v2 0/3] arm64: Add optimized memset/memcpy functions   Stefan Roese
• [PATCH v2 1/3] arm64: arch/arm/lib: Add optimized memset/memcpy functions   Stefan Roese
• [PATCH v2 2/3] arm64: memset-arm64: Use simple memset when cache is disabled   Stefan Roese
• [PATCH v2 3/3] arm64: Kconfig: Enable usage of optimized memset/memcpy   Stefan Roese
• [PATCH] fdt_support: Add kernel-doc for fdt_fixup_memory_banks()   Michal Simek
• [PATCH 0/9] meson64_android: Android boot flow using abootimg   Neil Armstrong
• [PATCH 0/9] meson64_android: Android boot flow using abootimg   Neil Armstrong
• [PATCH v2 2/3] arm64: memset-arm64: Use simple memset when cache is disabled   Rasmus Villemoes
• [PATCH v2 2/3] arm64: memset-arm64: Use simple memset when cache is disabled   Stefan Roese
• [PATCH] am33xx: Fix USB for am335x boards   Harald Seiler
• [PATCH] configs: fsl: migrate FMAN/QE specific defines to Kconfig   Rajesh Bhagat
• [PATCH v2 1/3] arm64: arch/arm/lib: Add optimized memset/memcpy functions   Rasmus Villemoes
• [PATCH v2 1/3] arm64: arch/arm/lib: Add optimized memset/memcpy functions   Stefan Roese
• [PATCH] xilinx: Disable ARCH_FIXUP_FDT_MEMORY   Michal Simek
• [PATCH] am33xx: Fix USB for am335x boards   Tom Rini
• [PATCH 0/4] xilinx: Add SoC Xilinx driver for zynqmp & versal   Michal Simek
• [PATCH 1/4] soc: xilinx: zynqmp: Add soc_xilinx_zynqmp driver   Michal Simek
• [PATCH 2/4] soc: xilinx: versal: Add soc_xilinx_versal driver   Michal Simek
• [PATCH 3/4] xilinx: common: Add function to print SoC info   Michal Simek
• [PATCH 4/4] xilinx: Enable config to display cpuinfo   Michal Simek
• [PATCH] cmd: pwm: Remove additional pwm description   Michal Simek
• [PATCH] crypto/fsl: fix missed dma_addr_t -> caam_dma_addr_t conversion   Horia Geantă
• [PATCH] rpi: Conditionally add simple-framebuffer node   Ivan T. Ivanov
• U-boot doesn't start anymore   Claudiu Petre
• RFC: Support for U-Boot phases in Kconfig   Simon Glass
• [PATCH] x86: Ensure the e820 map is installed in all cases   Christian Melki
• [PATCH 1/2] doc: imx: psb: Fix PERSIST_SECONDARY_BOOT bit location in GPR10   Marek Vasut
• [PATCH 2/2] doc: imx: psb: Add documentation for MX8MM behavior with Fast Boot fuse blown   Marek Vasut
• RFC: Support for U-Boot phases in Kconfig   Tom Rini
• [PATCH 0/5] arm: mach-k3: Fixes for j721e/j7200 clock data and drivers   Dave Gerlach
• [PATCH 1/5] arm: mach-k3: j721e: Fix clk-data parenting for postdiv PLL clocks   Dave Gerlach
• [PATCH 2/5] arm: mach-k3: j7200: Fix clk-data parenting for postdiv PLL clocks   Dave Gerlach
• [PATCH 3/5] arm: mach-k3: Add note to auto-generated files   Dave Gerlach
• [PATCH 4/5] clk: ti: k3-pll: Change DIV_CTRL programming to read-modify-write   Dave Gerlach
• [PATCH 5/5] clk: ti: k3: Update driver to account for divider flags   Dave Gerlach
• [PATCH 1/1] arm: socfpga: Migrate CONFIG_HPS namespace to HPS   Tom Rini
• [PATCH 1/1] arm: socfpga: Migrate CONFIG_HPS namespace to HPS   Marek Vasut
• [PATCH] usb: dwc2: Rename CONFIG_DWC2 namespace to DWC2   Tom Rini
• [PATCH] aristainetos2: Rename CONFIG_EXTRA_ENV_BOARD_SETTINGS   Tom Rini
• [PATCH 1/1] arm: socfpga: Migrate CONFIG_HPS namespace to HPS   Tom Rini
• RFC: Support for U-Boot phases in Kconfig   Simon Glass
• [PATCH 1/1] arm: socfpga: Migrate CONFIG_HPS namespace to HPS   Tom Rini
• [PATCH 1/1] arm: socfpga: Migrate CONFIG_HPS namespace to HPS   Marek Vasut
• [PATCH 1/1] arm: socfpga: Migrate CONFIG_HPS namespace to HPS   Tom Rini
• [PATCH 1/3] aristainetos2: Rename CONFIG_EXTRA_ENV_BOARD_SETTINGS   Tom Rini
• [PATCH 2/3] arm: keystone2: Rename CONFIG_ENV_KS2_BOARD_SETTINGS   Tom Rini
• [PATCH 3/3] exynos: Update environment macros a bit   Tom Rini
• Building U-Boot for Compulab's imx8mm-cl-iot-gate board   Fabio Estevam
• Building U-Boot for Compulab's imx8mm-cl-iot-gate board   Paul Liu
• Building U-Boot for Compulab's imx8mm-cl-iot-gate board   Fabio Estevam
• [PATCH v3 1/5] efi_loader: add secure boot variable measurement   Masahisa Kojima
• [PATCH v3 2/5] efi_loader: add boot variable measurement   Masahisa Kojima
• [PATCH 1/3] aristainetos2: Rename CONFIG_EXTRA_ENV_BOARD_SETTINGS   Heiko Schocher
• [PATCH 3/5] arm: mach-k3: Add note to auto-generated files   Lokesh Vutla
• [PATCH v4 00/10] handling all DM watchdogs in watchdog_reset()   Rasmus Villemoes
• [PATCH v4 00/10] handling all DM watchdogs in watchdog_reset()   Stefan Roese
• [PATCH v4 00/10] handling all DM watchdogs in watchdog_reset()   Rasmus Villemoes
• [PATCH 1/3] arm: kirkwood: GoFlex Home: Add DM Ethernet, remove IDE, and add DM SATA configs   Stefan Roese
• [PATCH 2/3] arm: kirkwood: GoFlex Home: Add DM SATA configs   Stefan Roese
• [PATCH 3/3] arm: kirkwood: GoFlex Home: Use Ethernet PHY name and address from device tree   Stefan Roese
• [PATCH] arm: mvebu: Hang if ddr3_init() fails   Stefan Roese
• [PATCH] arm: a37xx: pci: Fix handling PIO config error responses   Stefan Roese
• [PATCH] arm: kirkwood: Dockstar: Update board maintainer   Stefan Roese
• [PATCH] arm: kirkwood: Goflex Home: Update board maintainer   Stefan Roese
• [PATCH v3 2/5] efi_loader: add boot variable measurement   AKASHI Takahiro
• [PULL u-boot] Please pull u-boot-amlogic-202107810   Neil Armstrong
• [PATCH] arm: mvebu: a38x: Define supported UART baudrates   Pali Rohár
• [PATCH 1/4] tools: kwbimage: Verify supported image version   Pali Rohár
• [PATCH 2/4] tools: kwbimage: Verify size of v0 image header   Pali Rohár
• [PATCH 3/4] tools: kwbimage: Verify size of image data   Pali Rohár
• [PATCH 4/4] tools: kwbimage: Use IBR_HDR_* constants instead of raw numbers   Pali Rohár
• [PATCH 0/3] arm: kirkwood: Convert the GoFlex Home board Ethernet and SATA to Driver Model.   Stefan Roese
• [PATCH 0/5] arm: mvebu: Automatically detect CONFIG_SYS_TCLK   Stefan Roese
• [PATCH v2] arm: mvebu: sata_mv failed to identify HDDs during cold start   Stefan Roese
• [PATCH] arm: a37xx: pci: Fix handling PIO config error responses   Stefan Roese
• [PATCH] arm: mvebu: Hang if ddr3_init() fails   Stefan Roese
• [PATCH] arm: kirkwood: Dockstar: Update board maintainer   Stefan Roese
• [PATCH] arm: kirkwood: Goflex Home: Update board maintainer   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH 1/3] mtd: kconfig: Fix CFI_FLASH dependency   Stefan Roese
• [PATCH 2/3] flash.h: Remove CONFIG_SYS_FLASH_CFI from flash_info_t   Stefan Roese
• [PATCH 3/3] riscv: qemu: Enable MTD NOR flash support   Stefan Roese
• [PATCH 0/3] Add support for the GST ESPRESSOBin-Ultra board   Gerald Kerma
• [PATCH 1/3] cmd: mvebu: Implement the Marvell hw_info command   Gerald Kerma
• [PATCH 2/3] arm: mvebu: mvebu_armada-37xx: Define the loadaddr environment variable   Gerald Kerma
• [PATCH 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Gerald Kerma
• [PATCH v3 2/5] efi_loader: add boot variable measurement   Masahisa Kojima
• [PATCH v3 0/5] add measurement support   Heinrich Schuchardt
• [PATCH] rockchip: Fix u-boot-rockchip.bin build   Kever Yang
• [PATCH] rk3399: boot_devices fix spinor node name   Kever Yang
• [PATCH v2 1/5] rockchip: rk3188-cru-common: sync clock dt-binding header from Linux   Kever Yang
• [PATCH v2 6/6] board: apalis-tk1: launch toradex easy installer in usb recovery   Marcel Ziswiler
• [PATCH v2 2/5] ARM: dts: rockchip: update rk3xxx.dtsi   Kever Yang
• [PATCH v2 4/5] ARM: dts: rockchip: update rk3188.dtsi   Kever Yang
• [PATCH v2 5/5] ARM: dts: rockchip: update rk3188-radxarock.dts   Kever Yang
• [PATCH v2 3/5] rockchip: rk3188-power: sync power domain dt-binding header from Linux   Kever Yang
• [PATCH v3 1/3] mmc: rockchip_sdhci: add phy and clock config for rk3399   Kever Yang
• [PATCH v3 2/3] mmc: rockchip_sdhci: Add support for RK3568   Kever Yang
• [PATCH v3 3/3] rockchip: config: evb-rk3399: add hs400 and SDMA support   Kever Yang
• RFC: Support for U-Boot phases in Kconfig   Grant Likely
• [RFC PATCH v1] phy: rockchip: add basic rk3328 support to phy-rockchip-inno-usb2.c   Kever Yang
• [PATCH] cmd: boot: Update reset usage message   Michal Simek
• [PATCH] rockchip: rk3328: fix booting error for nanopi-r2s   Kever Yang
• [PATCH 1/4] arm64: rk3399: r4s: correct the LEDS label name   Kever Yang
• [PATCH 2/4] arm64: rk3399: r4s: Inheritance uses the sdmmc definition in dtsi   Kever Yang
• [PATCH 3/4] arm64: rk3399: r4s: Remove undesirable MAC address fetching methods for ethernet   Kever Yang
• [PATCH 4/4] arm64: rk3399: r4s: disabled i2c4 bus during the system boot process   Kever Yang
• [PATCH 1/2] doc: imx: psb: Fix PERSIST_SECONDARY_BOOT bit location in GPR10   Marcel Ziswiler
• [PATCH 2/2] doc: imx: psb: Add documentation for MX8MM behavior with Fast Boot fuse blown   Marcel Ziswiler
• [PATCH 1/3] cmd: mvebu: Implement the Marvell hw_info command   Luka Kovacic
• [PATCH 1/3] arm: dts: sync the Rockhip 3399 SoCs from Linux   Kever Yang
• [PATCH 2/3] arm: dts: sync the Rockhip 3328 SoCs from Linux   Kever Yang
• [PATCH 3/3] arm: dts: sync the Rockhip 3368 SoCs from Linux   Kever Yang
• [PATCH] rockchip: Fix u-boot-rockchip.bin build   Kever Yang
• [PATCH v3 3/3] rockchip: config: evb-rk3399: add hs400 and SDMA support   Philipp Tomsich
• [PATCH v7 1/6] spi: rockchip_sfc: add support for Rockchip SFC   Kever Yang
• [PATCH v7 2/6] rockchip: px30: Add support for using SFC   Kever Yang
• [PATCH v7 3/6] rockchip: px30: add the serial flash controller   Kever Yang
• [PATCH v7 4/6] mtd: spi-nor-ids: Add XTX XT25F128B   Kever Yang
• [PATCH v7 5/6] rockchip: px30: add support for SFC for Odroid Go Advance   Kever Yang
• [PATCH v7 6/6] rockchip: px30: Support configure SFC   Kever Yang
• [PATCH v3 2/3] mmc: rockchip_sdhci: Add support for RK3568   Philipp Tomsich
• [PATCH v7 1/6] spi: rockchip_sfc: add support for Rockchip SFC   Philipp Tomsich
• [PATCH v7 4/6] mtd: spi-nor-ids: Add XTX XT25F128B   Philipp Tomsich
• [PATCH v7 6/6] rockchip: px30: Support configure SFC   Philipp Tomsich
• [PATCH 1/3] mtd: kconfig: Fix CFI_FLASH dependency   Stefan Roese
• [PATCH 2/3] flash.h: Remove CONFIG_SYS_FLASH_CFI from flash_info_t   Stefan Roese
• [PATCH 3/3] riscv: qemu: Enable MTD NOR flash support   Stefan Roese
• Please pull u-boot-cfi-flash/master   Stefan Roese
• [PATCH 1/3] cmd: mvebu: Implement the Marvell hw_info command   Gérald Kerma
• [PATCH] arm: mvebu: a38x: Define supported UART baudrates   Marek Behun
• [RFC PATCH v1] phy: rockchip: add basic rk3328 support to phy-rockchip-inno-usb2.c   Johan Jonker
• Building U-Boot for Compulab's imx8mm-cl-iot-gate board   Fabio Estevam
• [PATCH v4 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Rasmus Villemoes
• [PATCH v2] xilinx: zynqmp: Initialize usb and scsi via preboot   Michal Simek
• [PATCH v4 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Stefan Roese
• [PATCH v4 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Rasmus Villemoes
• [PATCH v4 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Stefan Roese
• [PATCH 12/23] ti: Convert CONFIG_TI_EDMA3 to Kconfig   Lokesh Vutla
• [PATCH] powerpc: Remove unused FCC ethernet code   Tom Rini
• EFI from usb HDD   Michal Simek
• [PATCH v4 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Wolfgang Denk
• [PATCH v4 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Tom Rini
• [PATCH v5 00/12] handling all DM watchdogs in watchdog_reset()   Rasmus Villemoes
• [PATCH v5 01/12] watchdog: wdt-uclass.c: use wdt_start() in wdt_expire_now()   Rasmus Villemoes
• [PATCH v5 02/12] watchdog: wdt-uclass.c: introduce struct wdt_priv   Rasmus Villemoes
• [PATCH v5 03/12] watchdog: wdt-uclass.c: neaten UCLASS_DRIVER definition   Rasmus Villemoes
• [PATCH v5 04/12] watchdog: wdt-uclass.c: refactor initr_watchdog()   Rasmus Villemoes
• [PATCH v5 05/12] watchdog: wdt-uclass.c: keep track of each device's running state   Rasmus Villemoes
• [PATCH v5 06/12] sandbox: disable CONFIG_WATCHDOG_AUTOSTART   Rasmus Villemoes
• [PATCH v5 07/12] watchdog: wdt-uclass.c: add wdt_stop_all() helper   Rasmus Villemoes
• [PATCH v5 08/12] board: x530: switch to wdt_stop_all()   Rasmus Villemoes
• [PATCH v5 09/12] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Rasmus Villemoes
• [PATCH v5 10/12] watchdog: add gpio watchdog driver   Rasmus Villemoes
• [PATCH v5 11/12] sandbox: add test of wdt_gpio driver   Rasmus Villemoes
• [PATCH v5 12/12] sandbox: add test of wdt-uclass' watchdog_reset()   Rasmus Villemoes
• RFC: Support for U-Boot phases in Kconfig   Simon Glass
• RFC: Support for U-Boot phases in Kconfig   Simon Glass
• Building U-Boot for Compulab's imx8mm-cl-iot-gate board   Fabio Estevam
• [PATCH v3] board: apalis-tk1: launch toradex easy installer in usb recovery   Marcel Ziswiler
• [PATCH v3] board: apalis-tk1: launch toradex easy installer in usb recovery   Stefano Babic
• RFC: Support for U-Boot phases in Kconfig   Grant Likely
• RFC: Support for U-Boot phases in Kconfig   Tom Rini
• RFC: Support for U-Boot phases in Kconfig   Simon Glass
• RFC: Support for U-Boot phases in Kconfig   Tom Rini
• [PATCH v3 0/3] arm64: Add optimized memset/memcpy/memove functions   Stefan Roese
• [PATCH v3 1/3] arm64: arch/arm/lib: Add optimized memset/memcpy/memmove functions   Stefan Roese
• [PATCH v3 2/3] arm64: memset-arm64: Use simple memset when cache is disabled   Stefan Roese
• [PATCH v3 3/3] arm64: Kconfig: Enable usage of optimized memset/memcpy/memmove   Stefan Roese
• RFC: Support for U-Boot phases in Kconfig   Simon Glass
• RFC: Support for U-Boot phases in Kconfig   Simon Glass
• RFC: Support for U-Boot phases in Kconfig   Tom Rini
• [PATCH] arm: mvebu: a38x: Define supported UART baudrates   Stefan Roese
• [PATCH 1/4] tools: kwbimage: Verify supported image version   Stefan Roese
• [PATCH 2/4] tools: kwbimage: Verify size of v0 image header   Stefan Roese
• [PATCH 3/4] tools: kwbimage: Verify size of image data   Stefan Roese
• [PATCH 4/4] tools: kwbimage: Use IBR_HDR_* constants instead of raw numbers   Stefan Roese
• [PATCH v3 0/3] arm64: Add optimized memset/memcpy/memove functions   Tom Rini
• RFC: Support for U-Boot phases in Kconfig   Simon Glass
• [PATCH v3 0/3] arm64: Add optimized memset/memcpy/memove functions   Stefan Roese
• RFC: Support for U-Boot phases in Kconfig   Tom Rini
• RFC: Support for U-Boot phases in Kconfig   Simon Glass
• RFC: Support for U-Boot phases in Kconfig   Tom Rini
• [PULL u-boot] Please pull u-boot-amlogic-202107810   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• Please pull u-boot-cfi-flash/master   Tom Rini
• [PATCH v3] board: apalis-tk1: launch toradex easy installer in usb recovery   Tom Warren
• RFC: Support for U-Boot phases in Kconfig   Simon Glass
• [PATCH 1/2] arm: mvebu: axp: Properly check for Armada XP in mach/soc.h   Pali Rohár
• [PATCH 2/2] arm: mvebu: a37xx: Define CONFIG_SYS_REF_CLK and use it instead of get_ref_clk()   Pali Rohár
• [PATCH] arm64: zynqmp: Print the secure boot status information in EL3   Jorge Ramirez-Ortiz, Foundries
• [PATCH] zynqmp: restore the jtag interface   Jorge Ramirez-Ortiz, Foundries
• [PATCH 2/2] serial: a37xx: Do not call get_ref_clk() in _debug_uart_init()   Pali Rohár
• [PATCH v3] board: apalis-tk1: launch toradex easy installer in usb recovery   Marcel Ziswiler
• RFC: Support for U-Boot phases in Kconfig   Sean Anderson
• RFC: Support for U-Boot phases in Kconfig   Tom Rini
• RFC: Support for U-Boot phases in Kconfig   Tom Rini
• RFC: Support for U-Boot phases in Kconfig   Tom Rini
• U-Boot boards needing CONFIG_DM migration   Tom Rini
• [PATCH v3] board: apalis-tk1: launch toradex easy installer in usb recovery   Tom Warren
• [PATCH] mx28evk: Only keep the main target   Fabio Estevam
• U-Boot boards needing CONFIG_DM migration   Fabio Estevam
• U-Boot boards needing CONFIG_DM migration   Tom Rini
• [PATCH 1/3] arm: dts: sync the Rockhip 3399 SoCs from Linux   Kever Yang
• [PATCH] rockchip: rk3328: fix booting error for nanopi-r2s   Kever Yang
• [PATCH] rockchip: rk3328: fix booting error for nanopi-r2s   Jason Lee
• 回复: [PATCH V1] arm: add initial support for the Phytium Pomelo Board   Nicholas zheng
• [PATCH 0/2] arm: kirkwood: Dockstar: Convert the board Ethernet to Driver Model.   Tony Dinh
• [PATCH 1/2] arm: kirkwood: Dockstar: Add DM Ethernet   Tony Dinh
• [PATCH 2/2] arm: kirkwood: Dockstar: Use Ethernet PHY name and address from device tree   Tony Dinh
• [PATCH] zynqmp: restore the jtag interface   Michal Simek
• [PATCH] arm64: zynqmp: Print the secure boot status information in EL3   Michal Simek
• [PATCH] configs: layerscape: Disable the EFI_LOADER feature   Z.Q. Hou
• [PATCH 2/3] Add fdt network helper functions   Stefan Roese
• [PATCH 1/3] Add fdt network helper header file   Stefan Roese
• [PATCH 3/3] Add fdt network helper to Makefile   Stefan Roese
• [PATCH 0/3] common: Add fdt network helper   Stefan Roese
• [PATCH v4 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Wolfgang Denk
• [PATCH v5 09/12] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Wolfgang Denk
• [PATCH 1/1] arm: socfpga: Migrate CONFIG_HPS namespace to HPS   Chee, Tien Fong
• [PATCH] configs: Layerscape: Remove the 'fdt_addr' env   Wolfgang Denk
• [PATCH] configs: Layerscape: Remove the 'fdt_addr' env   Zhiqiang Hou
• [PATCH] configs: Layerscape: Remove the 'fdt_addr' env   Z.Q. Hou
• Pull request: u-boot-rockchip-20210812   Kever Yang
• [PATCH v3 0/3] arm64: Add optimized memset/memcpy/memove functions   Stefan Roese
• [PATCH] configs: Layerscape: Remove the 'fdt_addr' env   Wolfgang Denk
• [PATCH] rockchip: rk33xx: Drop ROCKCHIP_USB2_PHY on boards without it   Peter Robinson
• [PATCH 2/3] Add fdt network helper functions   Tony Dinh
• EFI from usb HDD   AKASHI Takahiro
• [PATCH 1/1] cmd: enable CONFIG_CMD_EFIDEBUG by default   Heinrich Schuchardt
• [PATCH v8 0/5] rockchip_sfc: add support for Rockchip SFC   Jon Lin
• [PATCH v8 1/5] spi: rockchip_sfc: add support for Rockchip SFC   Jon Lin
• [PATCH v8 2/5] rockchip: px30: Add support for using SFC   Jon Lin
• [PATCH v8 3/5] rockchip: px30: add the serial flash controller   Jon Lin
• [PATCH v8 4/5] rockchip: px30: add support for SFC for Odroid Go Advance   Jon Lin
• [PATCH v8 5/5] rockchip: px30: Support configure SFC   Jon Lin
• [PATCH v4 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Tom Rini
• [RFC PATCH v8 0/6] rockchip_sfc: add support for Rockchip SFC   Jon Lin
• [RFC PATCH v8 1/6] CI: Update to LLVM-12   Jon Lin
• [RFC PATCH v8 2/6] spi: rockchip_sfc: add support for Rockchip SFC   Jon Lin
• [RFC PATCH v8 3/6] rockchip: px30: Add support for using SFC   Jon Lin
• [RFC PATCH v8 4/6] rockchip: px30: add the serial flash controller   Jon Lin
• [RFC PATCH v8 0/5] rockchip_sfc: add support for Rockchip SFC   Jon Lin
• [RFC PATCH v8 1/5] spi: rockchip_sfc: add support for Rockchip SFC   Jon Lin
• [RFC PATCH v8 2/5] rockchip: px30: Add support for using SFC   Jon Lin
• [RFC PATCH v8 3/5] rockchip: px30: add the serial flash controller   Jon Lin
• [RFC PATCH v8 4/5] rockchip: px30: add support for SFC for Odroid Go Advance   Jon Lin
• [RFC PATCH v8 5/5] rockchip: px30: Support configure SFC   Jon Lin
• [PATCH v4 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Simon Glass
• [PATCH v4 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Wolfgang Denk
• Hints on how to use efi_driver/efi_block_device.c   Christian Melki
• [PATCH v4 0/3] arm64: Add optimized memset/memcpy/memove functions   Stefan Roese
• [PATCH v4 1/3] arm64: arch/arm/lib: Add optimized memset/memcpy/memmove functions   Stefan Roese
• [PATCH v4 2/3] arm64: memset-arm64: Use simple memset when cache is disabled   Stefan Roese
• [PATCH v4 3/3] arm64: Kconfig: Enable usage of optimized memset/memcpy/memmove   Stefan Roese
• [PATCH] env: Make _init() expect _INVALID when _IS_NOWHERE   Pierre-Clément Tosi
• [PATCH] env: Make _init() expect _INVALID when _IS_NOWHERE   Marek Vasut
• [PATCH] cmd: boot: Update reset usage message   Igor Opaniuk
• [PATCH v4 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Tom Rini
• U-Boot sunxi DM_I2C migration?   Tom Rini
• [PATCH 1/1] riscv: show code leading to exception   Heinrich Schuchardt
• [PATCH v8 1/5] spi: rockchip_sfc: add support for Rockchip SFC   Chris Morgan
• [PATCH v2 3/6] riscv: lib: introduce cache_init interface   Sean Anderson
• [PATCH v2 5/6] riscv: lib: move platform-related libraries to sperate folder   Sean Anderson
• U-Boot sunxi DM_I2C migration?   Andre Przywara
• [PATCH] arm: kirkwood: Sheevaplug: Update board maintainer   Tony Dinh
• U-Boot sunxi DM_I2C migration?   Tom Rini
• [PATCH 1/2] x86: crownbay: Enable SeaBIOS support   Simon Glass
• [PATCH 2/2] doc: x86: Update SeaBIOS build instructions   Simon Glass
• [PATCH 2/7] xyz-modem: Fix x-modem "xyzModem_eof error" at the end of file   Simon Glass
• [PATCH 5/7] xyz-modem: Properly abort/terminate transfer on error   Simon Glass
• [PATCH 7/7] xyz-modem: Allow to cancel transfer also by CTRL+C   Simon Glass
• [PATCH] x86: crownbay: Enable CONFIG_SPI_FLASH_SMART_HWCAPS   Simon Glass
• Proposal: U-Boot MTD (rewriting old story)   Simon Glass
• [PATCH] fdt_support: Add kernel-doc for fdt_fixup_memory_banks()   Simon Glass
• [PATCH] cmd: pwm: Remove additional pwm description   Simon Glass
• [PATCH 5/7] xyz-modem: Properly abort/terminate transfer on error   Pali Rohár
• Hints on how to use efi_driver/efi_block_device.c   Simon Glass
• [PATCH 17/23] power: Tidy up #undef of CONFIG_DM_PMIC   Jaehoon Chung
• [PATCH 18/23] power: Rename CONFIG_POWER to CONFIG_POWER_LEGACY   Jaehoon Chung
• [PATCH 19/23] i2c: Convert CONFIG_POWER_I2C et al to Kconfig   Jaehoon Chung
• [PATCH 21/23] power: Refactor Makefile rules   Jaehoon Chung
• [PATCH 05/12] mmc: nds32: ftsdc010: Convert to livetree   Jaehoon Chung
• [PATCH 01/23] mmc: Rename MMC_SUPPORT to MMC   Jaehoon Chung
• [PATCH 3/3] exynos: Update environment macros a bit   Jaehoon Chung
• [PATCH v3 0/3] Add support for the GST ESPRESSOBin-Ultra board   Luka Kovacic
• [PATCH v3 1/3] arm: mvebu: mvebu_armada-37xx: Implement the mac command (Marvell hw_info)   Luka Kovacic
• [PATCH v3 2/3] arm: mvebu: mvebu_armada-37xx: Define the loadaddr environment variable   Luka Kovacic
• [PATCH v3 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Luka Kovacic
• Hints on how to use efi_driver/efi_block_device.c   Heinrich Schuchardt
• [PATCH 1/2] x86: crownbay: Enable SeaBIOS support   Bin Meng
• [PATCH 2/2] doc: x86: Update SeaBIOS build instructions   Bin Meng
• [PATCH] x86: crownbay: Enable CONFIG_SPI_FLASH_SMART_HWCAPS   Bin Meng
• [PATCH 1/2] imx8mm-cl-iot-gate: Do not build fip.bin by default   Fabio Estevam
• [PATCH 2/2] imx8mm-cl-iot-gate: Add documentation   Fabio Estevam
• [PATCH 05/23] serial: Add a SERIAL config   Sean Anderson
• Hints on how to use efi_driver/efi_block_device.c   AKASHI Takahiro
• [PATCH 1/1] riscv: show code leading to exception   Sean Anderson
• [PATCH v3 1/3] arm: mvebu: mvebu_armada-37xx: Implement the mac command (Marvell hw_info)   Marek Behún
• [PATCH v8 1/5] spi: rockchip_sfc: add support for Rockchip SFC   Jon Lin
• [PATCH 1/1] riscv: show code leading to exception   Heinrich Schuchardt
• [PATCH 1/1] riscv: show code leading to exception   Sean Anderson
• [PATCH 1/1] riscv: show code leading to exception   Sean Anderson
• [PATCH v2 5/6] riscv: lib: move platform-related libraries to sperate folder   Zong Li
• [PATCH v2 3/6] riscv: lib: introduce cache_init interface   Zong Li
• Please pull u-boot-x86   Bin Meng
• [PATCH] cmd: boot: Update reset usage message   Wolfgang Denk
• [PATCH v4 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Wolfgang Denk
• [PATCH] cmd: boot: Update reset usage message   Michal Simek
• [PATCH] cmd: boot: Update reset usage message   Wolfgang Denk
• [PATCH] rpi: Conditionally add simple-framebuffer node   Ivan T. Ivanov
• [PATCH v4 0/5] add measurement support   Masahisa Kojima
• [PATCH v4 1/5] efi_loader: add secure boot variable measurement   Masahisa Kojima
• [PATCH v4 2/5] efi_loader: add boot variable measurement   Masahisa Kojima
• [PATCH v4 3/5] efi_loader: add ExitBootServices() measurement   Masahisa Kojima
• [PATCH v4 4/5] efi_loader: refactor efi_append_scrtm_version()   Masahisa Kojima
• [PATCH v4 5/5] efi_loader: add comment for efi_tcg2.h   Masahisa Kojima
• [PATCH 0/4] Add octal DTR support for Macronix flash   JaimeLiao
• [PATCH 1/4] mtd: spi-nor: macronix: add support for Macronix octaflash   JaimeLiao
• [PATCH 2/4] mtd: spi-nor-core: Adding different type of command extension in Soft Reset   JaimeLiao
• [PATCH 3/4] mtd: spi-nor-core: set 4byte opcode when possible   JaimeLiao
• [PATCH 4/4] mtd: spi-nor-core: Add support for Macronix Octal flash   JaimeLiao
• Hints on how to use efi_driver/efi_block_device.c   Christian Melki
• [PATCH v3 2/3] arm: mvebu: mvebu_armada-37xx: Define the loadaddr environment variable   Pali Rohár
• [PATCH v3 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Pali Rohár
• [PATCH v3 1/3] arm: mvebu: mvebu_armada-37xx: Implement the mac command (Marvell hw_info)   Pali Rohár
• [PATCH v3 2/3] arm: mvebu: mvebu_armada-37xx: Define the loadaddr environment variable   Luka Kovacic
• [PATCH v3 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Luka Kovacic
• [PATCH] cmd: boot: Update reset usage message   Michal Simek
• [PATCH v3 1/3] arm: mvebu: mvebu_armada-37xx: Implement the mac command (Marvell hw_info)   Luka Kovacic
• [PATCH v3 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Pali Rohár
• [PATCH v3 2/3] arm: mvebu: mvebu_armada-37xx: Define the loadaddr environment variable   Pali Rohár
• [PATCH v3 2/3] arm: mvebu: mvebu_armada-37xx: Define the loadaddr environment variable   Luka Kovacic
• [PATCH v4 3/3] arm64: Kconfig: Enable usage of optimized memset/memcpy/memmove   Rasmus Villemoes
• [PATCH v3 1/3] arm: mvebu: mvebu_armada-37xx: Implement the mac command (Marvell hw_info)   Pali Rohár
• [PATCH v3 2/3] arm: mvebu: mvebu_armada-37xx: Define the loadaddr environment variable   Pali Rohár
• [PATCH v3 1/3] arm: mvebu: mvebu_armada-37xx: Implement the mac command (Marvell hw_info)   Luka Kovacic
• [PATCH v3 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Pali Rohár
• [PATCH v3 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Stefan Roese
• [PATCH 1/2] imx8mm-cl-iot-gate: Do not build fip.bin by default   Paul Liu
• Hints on how to use efi_driver/efi_block_device.c   Heinrich Schuchardt
• [PATCH v3 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Luka Kovacic
• [PATCH 2/2] imx8mm-cl-iot-gate: Add documentation   Paul Liu
• [PATCH v3 1/3] arm: mvebu: mvebu_armada-37xx: Implement the mac command (Marvell hw_info)   Pali Rohár
• [PATCH v3 1/3] arm: mvebu: mvebu_armada-37xx: Implement the mac command (Marvell hw_info)   Luka Kovacic
• [PATCH v3 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Pali Rohár
• [PATCH v3 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Luka Kovacic
• [PATCH v3 1/3] arm: mvebu: mvebu_armada-37xx: Implement the mac command (Marvell hw_info)   Pali Rohár
• [PATCH v3 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Luka Kovacic
• [PATCH v3 1/3] arm: mvebu: mvebu_armada-37xx: Implement the mac command (Marvell hw_info)   Luka Kovacic
• [PATCH v3 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Pali Rohár
• [PATCH v3 1/3] arm: mvebu: mvebu_armada-37xx: Implement the mac command (Marvell hw_info)   Pali Rohár
• [PATCH v3 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Pali Rohár
• [PATCH 1/3] arm: mvebu: espressobin: Enable also SATA support via PCIe   Pali Rohár
• [PATCH 2/3] arm: mvebu: turris_mox: Enable SATA support   Pali Rohár
• [PATCH 3/3] arm: mvebu: turris_omnia: Enable NVMe support   Pali Rohár
• [PATCH] serial: a37xx: Remove CONFIG_DEBUG_UART_SHIFT options   Pali Rohár
• [PATCH v5 09/12] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Rasmus Villemoes
• [PATCH 1/2] imx8mm-cl-iot-gate: Do not build fip.bin by default   Fabio Estevam
• [PATCH 1/2] armv8: Disable pointer authentication traps for EL1   Peter Hoyes
• [PATCH 2/2] armv8: Ensure EL1&0 VMSA is enabled   Peter Hoyes
• [PATCH v1] imx: mkimage_fit_atf: replace @ with hyphen   Fabio Estevam
• [PATCH v2 0/3] efi: Minimal revert to rodata change   Tom Rini
• Pull request: u-boot-rockchip-20210812   Tom Rini
• Please pull u-boot-x86   Tom Rini
• [PATCH v1] imx: mkimage_fit_atf: replace @ with hyphen   Heiko Thiery
• [PATCH v3 2/9] arm: dts: imx8mp: Add common u-boot dtsi   Fabio Estevam
• [PATCH v1] imx: mkimage_fit_atf: replace @ with hyphen   Fabio Estevam
• [PATCH v3 2/3] arm: mvebu: mvebu_armada-37xx: Define the loadaddr environment variable   Pali Rohár
• [PATCH] gpio: mxc_gpio: Fix i.MX8M GPIO output status read   Harm Berntsen
• [PATCH v1] imx: mkimage_fit_atf: replace @ with hyphen   Heiko Thiery
• [PATCH v2 0/2] Refactor and improve full help output from tools   Paul Barker
• [PATCH v2 1/2] tools: Refactor full help printing   Paul Barker
• [PATCH v2 2/2] tools: Handle PAGER containing arguments   Paul Barker
• [PATCH v8 1/5] spi: rockchip_sfc: add support for Rockchip SFC   Chris Morgan
• [PATCH v4 0/2] mmc: Add support for enumrating MMC card in user specified mode   Aswath Govindraju
• [PATCH v4 1/2] mmc: Add support for enumerating MMC card in a given mode using mmc command   Aswath Govindraju
• [PATCH v4 2/2] doc: usage: mmc: Document usage of speed mode in "mmc dev" and "mmc rescan"   Aswath Govindraju
• [PATCH v3] mmc: Add support for enumerating MMC card in a given mode using mmc command   Aswath Govindraju
• [PATCH 1/4] mtd: spi-nor: macronix: add support for Macronix octaflash   Pratyush Yadav
• [PATCH 1/3] Add fdt network helper header file   Ramon Fried
• [PATCH 2/3] Add fdt network helper functions   Ramon Fried
• [PATCH 3/3] Add fdt network helper to Makefile   Ramon Fried
• [PATCH 1/1] efi_loader: add Linux magic to RISC-V crt0   Heinrich Schuchardt
• [PATCH] tools: k3_fit_atf: Fix DM binary FIT load addresses   Suman Anna
• [PATCH v2 1/3] doc: Move devicetree control doc to rST   Heinrich Schuchardt
• [PATCH v2 2/3] doc: Update devicedocs including how to add tweaks   Heinrich Schuchardt
• [PATCH v2 3/3] doc: Add a note about why devicetree is used   Heinrich Schuchardt
• [PATCH v3 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Gérald Kerma
• [PATCH v4 3/5] efi_loader: add ExitBootServices() measurement   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: EFI_EVENT_GROUP_BEFORE_EXIT_BOOT_SERVICES   Heinrich Schuchardt
• [PATCH v4 3/5] efi_loader: add ExitBootServices() measurement   Heinrich Schuchardt
• [PATCH 1/1] cmd: enable CONFIG_CMD_EFIDEBUG by default   Heinrich Schuchardt
• [PATCH 1/1] ARM: renesas: reduce rcar3_salvator-x image size   Heinrich Schuchardt
• [PATCH v2 1/3] common: Add fdt network helper   Tony Dinh
• [PATCH v2 2/3] common: Add fdt network helper header file   Tony Dinh
• [PATCH v2 3/3] common: Add fdt network helper functions   Tony Dinh
• [PATCH] Allow colon in PXE bootfile URLs   Lyle Franklin
• Broken CONFIG_SPL_SATA_SUPPORT=y   Pali Rohár
• [PATCH 0/3] common: Add fdt network helper   Simon Glass
• Broken CONFIG_SPL_SATA_SUPPORT=y   Tom Rini
• [PATCH 1/2] ata: ahci-pci: Fix dependency on DM_PCI   Pali Rohár
• [PATCH 2/2] ata: ahci-pci: Add new option CONFIG_SPL_AHCI_PCI   Pali Rohár
• [bug?] SiFive Unmatched default boot script update?   Alexander von Gluck IV
• [bug?] SiFive Unmatched default boot script update?   Alexander von Gluck IV
• [PATCH] config/sifive_unmatched: add preboot commands   Alexander von Gluck IV
• Pull request for efi-2021-10-rc2-2   Heinrich Schuchardt
• [PATCH 01/14] configs: Disable LMB and BDI for tools-only   Marek Vasut
• [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Marek Vasut
• [PATCH 03/14] lmb: Always compile arch_lmb_reserve() into U-Boot on arm   Marek Vasut
• [PATCH 04/14] lmb: Always compile arch_lmb_reserve() into U-Boot on arc   Marek Vasut
• [PATCH 05/14] lmb: Add generic arch_lmb_reserve_generic()   Marek Vasut
• [PATCH 06/14] lmb: Switch to generic arch_lmb_reserve_generic()   Marek Vasut
• [PATCH 07/14] lmb: nios2: Add arch_lmb_reserve()   Marek Vasut
• [PATCH 08/14] lmb: nds32: Add arch_lmb_reserve()   Marek Vasut
• [PATCH 09/14] lmb: riscv: Add arch_lmb_reserve()   Marek Vasut
• [PATCH 10/14] lmb: sh: Add arch_lmb_reserve()   Marek Vasut
• [PATCH 11/14] lmb: xtensa: Add arch_lmb_reserve()   Marek Vasut
• [PATCH 12/14] lmb: x86: Add arch_lmb_reserve()   Marek Vasut
• [PATCH 13/14] lmb: Mark arch_lmb_reserve() as weak symbol   Marek Vasut
• [PATCH 14/14] lmb: Switch imx board_lmb_reserve() to arch_lmb_reserve()   Marek Vasut
• [PATCH 1/2] imx8mm-cl-iot-gate: Do not build fip.bin by default   Paul Liu
• [PATCH 14/14] lmb: Switch imx board_lmb_reserve() to arch_lmb_reserve()   Tom Rini
• [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Tom Rini
• [PATCH 03/14] lmb: Always compile arch_lmb_reserve() into U-Boot on arm   Tom Rini
• [PATCH 06/14] lmb: Switch to generic arch_lmb_reserve_generic()   Tom Rini
• [PATCH 05/14] lmb: Add generic arch_lmb_reserve_generic()   Tom Rini
• [PATCH 13/14] lmb: Mark arch_lmb_reserve() as weak symbol   Tom Rini
• [PATCH 0/3] common: Add fdt network helper   Tony Dinh
• [PATCH] riscv: Add missing sentinel in ocores_i2c.c   Thomas Skibo
• [PATCH v4 3/5] efi_loader: add ExitBootServices() measurement   Masahisa Kojima
• [PATCH v2 3/3] doc: Add a note about why devicetree is used   AKASHI Takahiro
• Pull request for efi-2021-10-rc2-2   Tom Rini
• [PATCH] ARM: Prevent the compiler from using NEON registers   Samuel Holland
• [PATCH 1/7] tools: imx8mimage: not abort when mmap fail   Peng Fan (OSS)
• [PATCH 2/7] imx: imx8mq_evk: switch to binman   Peng Fan (OSS)
• [PATCH 3/7] imx: imx8mq_phanbell: switch to binman   Peng Fan (OSS)
• [PATCH 4/7] imx: pico-imx8mq: switch to use binman   Peng Fan (OSS)
• [PATCH 5/7] imx: makefile: drop the use of imx8mimage.sh   Peng Fan (OSS)
• [PATCH 6/7] imx: imx8mq use common imximage.cfg   Peng Fan (OSS)
• [PATCH 7/7] doc: imx8mq_evk: update doc after using binman   Peng Fan (OSS)
• [PATCH v1] imx: spl: fix imx8m secure boot   Heiko Schocher
• [PATCH 1/1] doc: move i.MX7D/i.MX8MM A/B booting to board specific   Heinrich Schuchardt
• [PATCH v1] imx: mkimage_fit_atf: replace @ with hyphen   Heiko Thiery
• [PATCH 1/1] doc: rename Freescale to NXP   Heinrich Schuchardt
• [PATCH 1/3] arm: mvebu: espressobin: Enable also SATA support via PCIe   Stefan Roese
• [PATCH 2/3] arm: mvebu: turris_mox: Enable SATA support   Stefan Roese
• [PATCH 3/3] arm: mvebu: turris_omnia: Enable NVMe support   Stefan Roese
• [PATCH] serial: a37xx: Remove CONFIG_DEBUG_UART_SHIFT options   Stefan Roese
• [PATCH 1/1] doc: move i.MX7D/i.MX8MM A/B booting to board specific   Marek Vasut
• [PATCH] stm32mp: correctly handle board_get_usable_ram_top(0)   Patrice CHOTARD
• [PATCH] arm: kirkwood: Sheevaplug: Update board maintainer   Stefan Roese
• [PATCH 1/2] ata: ahci-pci: Fix dependency on DM_PCI   Stefan Roese
• [PATCH 2/2] ata: ahci-pci: Add new option CONFIG_SPL_AHCI_PCI   Stefan Roese
• [PATCH 1/2] arm: mvebu: axp: Properly check for Armada XP in mach/soc.h   Stefan Roese
• [PATCH 2/2] serial: a37xx: Do not call get_ref_clk() in _debug_uart_init()   Stefan Roese
• [PATCH v3 2/3] arm: mvebu: mvebu_armada-37xx: Define the loadaddr environment variable   Luka Kovacic
• [PATCH v3 2/3] arm: mvebu: mvebu_armada-37xx: Define the loadaddr environment variable   Pali Rohár
• [EXT] [PATCH v1] imx: spl: fix imx8m secure boot   Ye Li
• [PATCH 2/2] serial: a37xx: Do not call get_ref_clk() in _debug_uart_init()   Pali Rohár
• [PATCH v3 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Luka Kovacic
• [PATCH 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [PATCH 02/15] crypto/fsl: Add CAAM support for bkek, random number generation   Gaurav Jain
• [PATCH 03/15] i.MX8M: crypto: updated device tree for supporting DM in SPL   Gaurav Jain
• [PATCH 04/15] crypto/fsl: i.MX8M: Enable Job ring driver model in SPL and U-Boot.   Gaurav Jain
• [PATCH 05/15] i.MX6: Enable Job ring driver model in U-Boot.   Gaurav Jain
• [PATCH 06/15] i.MX7: Enable Job ring driver model in U-Boot.   Gaurav Jain
• [PATCH 07/15] i.MX7ULP: Enable Job ring driver model in U-Boot.   Gaurav Jain
• [PATCH 08/15] i.MX8: crypto: Add crypto node in device tree   Gaurav Jain
• [PATCH 09/15] crypto/fsl: i.MX8: Enable Job ring driver model in SPL and U-Boot.   Gaurav Jain
• [PATCH 10/15] crypto/fsl: Fix kick_trng   Gaurav Jain
• [PATCH 11/15] Layerscape: crypto: Add crypto node in device tree   Gaurav Jain
• [PATCH 12/15] Layerscape: Enable Job ring driver model in U-Boot.   Gaurav Jain
• [PATCH 13/15] PPC: crypto: Add crypto node in device tree   Gaurav Jain
• [PATCH 14/15] PPC: Enable Job ring driver model in U-Boot   Gaurav Jain
• [PATCH 15/15] update CAAM MAINTAINER   Gaurav Jain
• [PATCH v3 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Luka Kovacic
• [PATCH 2/2] serial: a37xx: Do not call get_ref_clk() in _debug_uart_init()   Stefan Roese
• [EXT] [PATCH v1] imx: spl: fix imx8m secure boot   Heiko Schocher
• [PATCH v3 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Gérald Kerma
• [PATCH v2] arm: mvebu: a37xx: Define CONFIG_SYS_REF_CLK and use it instead of get_ref_clk()   Pali Rohár
• [PATCH v3 2/9] arm: dts: imx8mp: Add common u-boot dtsi   Heiko Schocher
• [PATCH 1/7] arm: mach-imx: Update MAC fuse for i.MX8MP   Ye Li
• [PATCH 2/7] arm: mach-imx: Allow to build mac.c for EQoS driver   Ye Li
• [PATCH 3/7] arm: dts: imx8mp-evk: Enable the EQoS ethernet port   Ye Li
• [PATCH 4/7] imx8mp_evk: Fix incorrect cascade for FEC and EQOS setup   Ye Li
• [PATCH 5/7] imx8mp_evk: Remove EQoS PHY reset codes   Ye Li
• [PATCH 6/7] imx8mp_evk: Delete noncached memory config   Ye Li
• [PATCH 7/7] imx8mp_evk: Enable the DWC EQoS iMX driver   Ye Li
• [PATCH] ARM: stm32: Set environment sector size to 4k on DHSOM   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Reduce DHCOR SPI NOR frequency to 50 MHz   Patrice CHOTARD
• [Uboot-stm32] [PATCH] stm32mp: correctly handle board_get_usable_ram_top(0)   Patrice CHOTARD
• [PATCH 1/5] dm: crypto: Define UCLASS API for ECDSA signature verification   Patrice CHOTARD
• [PATCH 3/5] arm: stm32mp1: Implement ECDSA signature verification   Patrice CHOTARD
• [PATCH 4/5] Kconfig: FIT_SIGNATURE should not select RSA_VERIFY   Patrice CHOTARD
• [PATCH 5/5] test: dm: Add test for ECDSA UCLASS support   Patrice CHOTARD
• [PATCH] ARM: Prevent the compiler from using NEON registers   Andre Przywara
• [Uboot-stm32] [PATCH] arm: dts: stm32mp15: alignment with v5.14   Patrice CHOTARD
• [PATCH v3 1/5] arm: stm32mp: add config for STM32IMAGE support   Patrice CHOTARD
• [PATCH v3 2/5] arm: stm32mp: handle the OP-TEE nodes in DT with FIP support   Patrice CHOTARD
• [PATCH v3 3/5] arm: stm32mp: add defconfig for trusted boot with FIP   Patrice CHOTARD
• [PATCH v3 4/5] doc: st: stm32mp1: Add FIP support for trusted boot   Patrice CHOTARD
• [PATCH v3 5/5] stm32mp1: stm32prog: remove stm32prog_get_tee_partitions with FIP   Patrice CHOTARD
• [Uboot-stm32] [PATCH] clk: stm32mp1: add support of BSEC clock   Patrice CHOTARD
• [PULL] Pull request for u-boot master / v2021.10 = u-boot-stm32-20210816   Patrice CHOTARD
• [PATCH v2 0/5] Use device tree to get DRAM for sama5d27_som1_ek/sama5d2_xplained   Clément Léger
• [PATCH v2 1/5] board: sama5d27_som1_ek: Get dram size and base from device tree   Clément Léger
• [PATCH v2 2/5] board: sama5d27_som1_ek: Modify load addresses   Clément Léger
• [PATCH v2 3/5] ARM: dts: at91: sama5d2_xplained: Add memory node in devicetree   Clément Léger
• [PATCH v2 4/5] board: sama5d2_xplained: Get dram size and base from device tree   Clément Léger
• [PATCH v2 5/5] board: sama5d2_xplained: Modify load addresses   Clément Léger
• [PATCH u-boot-mvebu 0/3] turris_omnia: Disable MCU watchdog in SPL when booting over UART   Marek Behún
• [PATCH u-boot-mvebu 1/3] arm: mvebu: Move get_boot_device() to cpu.c and make visible   Marek Behún
• [PATCH u-boot-mvebu 2/3] arm: mvebu: turris_omnia: don't guard by CONFIG_SPL_BUILD macro   Marek Behún
• [PATCH u-boot-mvebu 3/3] arm: mvebu: turris_omnia: disable MCU watchdog in SPL when booting over UART   Marek Behún
• [PATCH 1/1] doc: rename Freescale to NXP   Stefano Babic
• [PATCH u-boot-mvebu 3/3] arm: mvebu: turris_omnia: disable MCU watchdog in SPL when booting over UART   Stefan Roese
• [PATCH v8 1/5] spi: rockchip_sfc: add support for Rockchip SFC   Jon Lin
• [PATCH u-boot-mvebu 3/3] arm: mvebu: turris_omnia: disable MCU watchdog in SPL when booting over UART   Marek Behún
• [PATCH u-boot-mvebu 3/3] arm: mvebu: turris_omnia: disable MCU watchdog in SPL when booting over UART   Stefan Roese
• [PATCH u-boot-mvebu 3/3] arm: mvebu: turris_omnia: disable MCU watchdog in SPL when booting over UART   Marek Behún
• [PATCH u-boot-mvebu 3/3] arm: mvebu: turris_omnia: disable MCU watchdog in SPL when booting over UART   Stefan Roese
• [PATCH v1 0/5] board: toradex: prepare and add colibri imx6ull 1gb (emmc) support   Marcel Ziswiler
• [PATCH v1 1/5] toradex: take over maintainership   Marcel Ziswiler
• [PATCH v1 2/5] toradex: configblock: fix interactive mode it handling   Marcel Ziswiler
• [PATCH v1 3/5] toradex: tdx-cfg-block: add new i.mx 6ull and 8m plus skus   Marcel Ziswiler
• [PATCH v1 4/5] colibri-imx6ull: imximage.cfg: integrate new 1GiB RAM variant   Marcel Ziswiler
• [PATCH v1 5/5] colibri-imx6ull: add emmc variant   Marcel Ziswiler
• [PATCH u-boot-mvebu v2 0/4] turris_omnia: Disable MCU watchdog in SPL when booting over UART   Marek Behún
• [PATCH u-boot-mvebu v2 1/4] arm: mvebu: Move get_boot_device() to cpu.c and make visible   Marek Behún
• [PATCH u-boot-mvebu v2 2/4] arm: mvebu: turris_omnia: don't guard by CONFIG_SPL_BUILD macro   Marek Behún
• [PATCH u-boot-mvebu v2 3/4] arm: mvebu: turris_omnia: disable MCU watchdog in SPL when booting over UART   Marek Behún
• [PATCH u-boot-mvebu v2 4/4] arm: mvebu: turris_omnia: disable MCU watchdog in board_late_init()   Marek Behún
• [PATCH v1 2/5] toradex: configblock: fix interactive mode it handling   Fabio Estevam
• [PATCH 3/5] arm: mach-k3: Add note to auto-generated files   Dave Gerlach
• [PATCH 1/1] doc: rename Freescale to NXP   Fabio Estevam
• [PATCH v1 2/5] toradex: configblock: fix interactive mode it handling   Marcel Ziswiler
• [PATCH v3 2/9] arm: dts: imx8mp: Add common u-boot dtsi   Fabio Estevam
• [PATCH v3 2/9] arm: dts: imx8mp: Add common u-boot dtsi   Frieder Schrempf
• [PATCH v1 2/5] toradex: configblock: fix interactive mode it handling   Fabio Estevam
• [PATCH v3 2/9] arm: dts: imx8mp: Add common u-boot dtsi   Frieder Schrempf
• [PATCH 3/5] arm: mach-k3: Add note to auto-generated files   Suman Anna
• [PATCH] tools: k3_fit_atf: Fix DM binary FIT load addresses   Suman Anna
• [PATCH v3 2/9] arm: dts: imx8mp: Add common u-boot dtsi   Fabio Estevam
• [RFC] imx8mm-evk: Generate a bootable flash.bin again   Fabio Estevam
• [PATCH v8 1/5] spi: rockchip_sfc: add support for Rockchip SFC   Chris Morgan
• [PATCH 1/1] doc: move doc/board/st/st.rst   Heinrich Schuchardt
• [PATCH u-boot-mvebu v2 1/4] arm: mvebu: Move get_boot_device() to cpu.c and make visible   Pali Rohár
• [PATCH u-boot-mvebu v2 2/4] arm: mvebu: turris_omnia: don't guard by CONFIG_SPL_BUILD macro   Pali Rohár
• [PATCH 1/1] doc: rename Freescale to NXP   Heinrich Schuchardt
• [PATCH u-boot-mvebu v2 3/4] arm: mvebu: turris_omnia: disable MCU watchdog in SPL when booting over UART   Pali Rohár
• [PATCH u-boot-mvebu v2 4/4] arm: mvebu: turris_omnia: disable MCU watchdog in board_late_init()   Pali Rohár
• [PULL] Pull request for u-boot master / v2021.10 = u-boot-stm32-20210816   Tom Rini
• [ANN] U-Boot v2021.10-rc2 released   Tom Rini
• [PATCH 1/1] doc: rename Freescale to NXP   Tom Rini
• [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]   Tom Rini
• [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]   Pali Rohár
• [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]   Tom Rini
• [PATCH 1/2] imx8mm-cl-iot-gate: Do not build fip.bin by default   Fabio Estevam
• [PATCH 1/2] imx8mm-cl-iot-gate: Do not build fip.bin by default   Tom Rini
• [PATCH 1/2] imx8mm-cl-iot-gate: Do not build fip.bin by default   Fabio Estevam
• Pull request, u-boot-tegra/master   Tom Warren
• [PATCH 0/3] common: Add fdt network helper   Tony Dinh
• [PATCH 1/2] imx8mm-cl-iot-gate: Do not build fip.bin by default   Paul Liu
• [PATCH 1/3] spi: rockchip_sfc: Impletment set_speed logic   Jon Lin
• [PATCH 2/3] spi: rockchip_sfc: Using read_poll   Jon Lin
• [PATCH 3/3] rockchip: px30: Change sfc node to match upstream linux proposed   Jon Lin
• [PATCH v8 1/5] spi: rockchip_sfc: add support for Rockchip SFC   Jon Lin
• [PATCH] imx8mm-cl-iot-gate: Split the defconfigs   Fabio Estevam
• [RFC] imx8mm-evk: Generate a bootable flash.bin again   Heiko Schocher
• [PATCH 1/1] kwbimage: check fopen() return value   Heinrich Schuchardt
• [PATCH 1/1] kwbimage: check return value of image_get_csk_index   Heinrich Schuchardt
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Heinrich Schuchardt
• [PATCH v2] imx: spl: fix imx8m secure boot   Heiko Schocher
• [PATCH] arm: dts: imx8mp: Delete default clocks for clock controller node   Ye Li
• [PATCH 1/1] kwbimage: check fopen() return value   Stefan Roese
• [PATCH 1/1] kwbimage: check return value of image_get_csk_index   Stefan Roese
• [PATCH] xilinx: zynqmp: Add debug messages for boot mode   Michal Simek
• EFI from usb HDD   Michal Simek
• [PATCH u-boot-mvebu v2 1/4] arm: mvebu: Move get_boot_device() to cpu.c and make visible   Stefan Roese
• [PATCH u-boot-mvebu v2 2/4] arm: mvebu: turris_omnia: don't guard by CONFIG_SPL_BUILD macro   Stefan Roese
• [PATCH u-boot-mvebu v2 3/4] arm: mvebu: turris_omnia: disable MCU watchdog in SPL when booting over UART   Stefan Roese
• [PATCH u-boot-mvebu v2 4/4] arm: mvebu: turris_omnia: disable MCU watchdog in board_late_init()   Stefan Roese
• [PATCH v2] arm: mvebu: a37xx: Define CONFIG_SYS_REF_CLK and use it instead of get_ref_clk()   Stefan Roese
• [PATCH 1/1] kwbimage: check return value of image_get_csk_index   Pali Rohár
• [PATCH 1/1] kwbimage: check fopen() return value   Pali Rohár
• [PATCH v5 0/3] arm64: Add optimized memset/memcpy/memove functions   Stefan Roese
• [PATCH v5 1/3] arm64: arch/arm/lib: Add optimized memset/memcpy/memmove functions   Stefan Roese
• [PATCH v5 2/3] arm64: memset-arm64: Use simple memset when cache is disabled   Stefan Roese
• [PATCH v5 3/3] arm64: Kconfig: Enable usage of optimized memset/memcpy/memmove   Stefan Roese
• [PATCH v4 3/3] arm64: Kconfig: Enable usage of optimized memset/memcpy/memmove   Stefan Roese
• [PATCH v3 0/4] Support SiFive Composable cache driver   Zong Li
• [PATCH v3 1/4] cache: add sifive composable cache driver   Zong Li
• [PATCH v3 2/4] riscv: lib: introduce a cache_init interface   Zong Li
• [PATCH v3 3/4] board: sifive: use ccache driver instead of helper function   Zong Li
• [PATCH v3 4/4] riscv: lib: modify the indent   Zong Li
• [PATCH] mmc: fsl_esdhc_imx: Fix clock disable issue   Ye Li
• [PATCH] arm: imx8m: Fix pad DSE issue for i.MX8MM/MN/MP   Ye Li
• [PATCH 1/2] mmc: fix switch issue with send_status disabled   Ye Li
• [PATCH 2/2] mmc: fix device_remove when HS400_ES is enabled   Ye Li
• [PATCH] mtd: nand: mxs_nand_spl: Add nand_spl_adjust_offset   Ye Li
• [PATCH v4 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Stefan Roese
• [PATCH 1/2] imx53: usbarmory: Add card detect configuration   andrej.rosano at f-secure.com
• [PATCH 2/2] imx53: usbarmory: Use ethernet driver model   andrej.rosano at f-secure.com
• [RFC] imx8mm-evk: Generate a bootable flash.bin again   Heiko Thiery
• [RFC] imx8mm-evk: Generate a bootable flash.bin again   Heiko Schocher
• [PATCH 1/4] ARM: dts: at91: sama5d2_icp: add QSPI1 device   Eugen Hristev
• [PATCH 2/4] ARM: dts: at91: sama5d2_icp: cosmetic arrangement of the nodes   Eugen Hristev
• [PATCH 3/4] ARM: dts: at91: sama5d2: fix dtc warning for ohci and ehci   Eugen Hristev
• [PATCH 4/4] configs: sama5d2: add qspi config for QSPI1   Eugen Hristev
• [PATCH] lib: add crc16.o if CONFIG_MMC_SPI_CRC_ON for SPL build   Andreas Schwab
• [PATCH 00/11] Reduce usage of timestamp macros   Pali Rohár
• [PATCH] watchdog: versal: Include header file needed for dev_ functions   Michal Simek
• [PATCH] arm64: zynqmp: Enable sha1sum command   Michal Simek
• [PATCH v4 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Tom Rini
• [PATCH v2] arm: mvebu: a37xx: Define CONFIG_SYS_REF_CLK and use it instead of get_ref_clk()   Marek Behún
• [PATCH v2] arm: mvebu: a37xx: Define CONFIG_SYS_REF_CLK and use it instead of get_ref_clk()   Stefan Roese
• Pull request, u-boot-tegra/master   Tom Rini
• [PATCH 00/11] Reduce usage of timestamp macros   Tom Rini
• U-Boot contributor call (17-Aug-21) in 45 minutes   Simon Glass
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
• [PATCH 0/5] efi_loader: user EfiBootServicesData for device path   Heinrich Schuchardt
• [PATCH 1/5] efi_loader: use an enum for the memory allocation types   Heinrich Schuchardt
• [PATCH 2/5] efi_loader rename enum efi_mem_type to efi_memory_type   Heinrich Schuchardt
• [PATCH 3/5] efi_loader: use correct type for AllocatePages, AllocatePool   Heinrich Schuchardt
• [PATCH 4/5] efi_loader: use EfiBootServicesData for device path   Heinrich Schuchardt
• [PATCH 5/5] efi_loader: use EfiBootServicesData for DP to text   Heinrich Schuchardt
• u-boot & ZFS   ChrisO
• [PATCH 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Simon Glass
• [PATCH 0/3] common: Add fdt network helper   Simon Glass
• [PATCH 05/15] i.MX6: Enable Job ring driver model in U-Boot.   Sean Anderson
• USB endpoints exclusion   Andy Shevchenko
• [PATCH v2] imx8mm-cl-iot-gate: Split the defconfigs   Fabio Estevam
• [PATCH 1/2] imx8mm-cl-iot-gate: Do not build fip.bin by default   Fabio Estevam
• U-Boot sunxi DM_I2C migration?   Tom Rini
• [PATCH 0/2] drivers: mmc: Add wait_dat0 support for more devices   stcarlso at linux.microsoft.com
• [PATCH 1/2] drivers: mmc: Add wait_dat0 support for Freescale eSDHC driver   stcarlso at linux.microsoft.com
• [PATCH 2/2] drivers: mmc: Add wait_dat0 support for sdhci driver   stcarlso at linux.microsoft.com
• [PATCH 00/13] Migrate some I2C symbols to Kconfig   Tom Rini
• [PATCH 01/13] kp_imx53: Switch to using a local namespace for ID EEPROM   Tom Rini
• [PATCH 02/13] davinci: Drop CONFIG_MAC_ADDR_IN_EEPROM   Tom Rini
• [PATCH 03/13] arm: shc: Change CONFIG_SYS_I2C_EEPROM_ADDR to EEPROM_ADDR   Tom Rini
• [PATCH 04/13] keymile: Use CONFIG_SYS_IVM_EEPROM_ADR   Tom Rini
• [PATCH 05/13] siemens: Move CONFIG_SYS_I2C_EEPROM_ADDR usage out of CONFIG namespace   Tom Rini
• [PATCH 06/13] Convert CONFIG_ID_EEPROM to Kconfig   Tom Rini
• [PATCH 07/13] i2c: S3C24X0: Finish Kconfig migration   Tom Rini
• [PATCH 08/13] cl-som-imx7: Enable CMD_EEPROM   Tom Rini
• [PATCH 09/13] eeprom: Drop CONFIG_ENV_EEPROM_IS_ON_I2C usage   Tom Rini
• [PATCH 10/13] Convert CONFIG_SYS_I2C_EEPROM_ADDR et al to Kconfig   Tom Rini
• [PATCH 11/13] Convert CONFIG_SYS_I2C_SOFT et al to Kconfig   Tom Rini
• [PATCH 12/13] Convert CONFIG_SYS_I2C_MVTWSI to Kconfig   Tom Rini
• [PATCH 13/13] i2c: Remove unused additional legacy soft i2c bus support   Tom Rini
• [PATCH 1/2] imx8mm-cl-iot-gate: Do not build fip.bin by default   Paul Liu
• u-boot & ZFS   Tom Rini
• [RFC] imx8mm-evk: Generate a bootable flash.bin again   Fabio Estevam
• [PATCH 3/5] efi_loader: use correct type for AllocatePages, AllocatePool   AKASHI Takahiro
• [PATCH 03/13] arm: shc: Change CONFIG_SYS_I2C_EEPROM_ADDR to EEPROM_ADDR   Heiko Schocher
• [PATCH 05/13] siemens: Move CONFIG_SYS_I2C_EEPROM_ADDR usage out of CONFIG namespace   Heiko Schocher
• [PATCH 11/13] Convert CONFIG_SYS_I2C_SOFT et al to Kconfig   Samuel Holland
• Re: [PATCH 3/5] efi_loader: use correct type for AllocatePages, AllocatePool   Heinrich Schuchardt
• EFI from usb HDD   AKASHI Takahiro
• [RFC] imx8mm-evk: Generate a bootable flash.bin again   Heiko Schocher
• U-Boot sunxi DM_I2C migration?   Samuel Holland
• [PATCH 3/5] efi_loader: use correct type for AllocatePages, AllocatePool   AKASHI Takahiro
• [RFC] imx8mm-evk: Generate a bootable flash.bin again   Frieder Schrempf
• [RFC] imx8mm-evk: Generate a bootable flash.bin again   Frieder Schrempf
• [RFC] imx8mm-evk: Generate a bootable flash.bin again   Frieder Schrempf
• [PATCH] configs: lx2160a: load device-tree in RAM for distro boot   Priyanka Jain
• [PATCH 1/1] doc: move doc/board/st/st.rst   Patrice CHOTARD
• [PATCH 01/13] kp_imx53: Switch to using a local namespace for ID EEPROM   Lukasz Majewski
• [PATCH v3 2/9] arm: dts: imx8mp: Add common u-boot dtsi   Marcel Ziswiler
• [RFC] imx8mm-evk: Generate a bootable flash.bin again   Marcel Ziswiler
• [PATCH 1/1] arm: Finish migration of HAS_FSL_XHCI_USB   Priyanka Jain (OSS)
• [PATCH 05/13] siemens: Move CONFIG_SYS_I2C_EEPROM_ADDR usage out of CONFIG namespace   Anatolij Gustschin
• EFI from usb HDD   Michal Simek
• [PATCH] configs: Layerscape: Remove the 'fdt_addr' env   Priyanka Jain (OSS)
• u-boot & ZFS   ChrisO
• u-boot & ZFS   Lukasz Majewski
• [PATCH] configs: Layerscape: Remove the 'fdt_addr' env   Priyanka Jain (OSS)
• [PATCH] arm: at91: gardena-smart-gateway-at91sam: Adjust to production values   Eugen.Hristev at microchip.com
• [PATCH] ARM: at91: Add chip ID of SAMA5D29   Eugen.Hristev at microchip.com
• [PATCH 0/4] clk: at91: fix system clocks display for sam9x60   Eugen.Hristev at microchip.com
• [PATCH] imx8mm-evk: Generate a single bootable flash.bin again   Fabio Estevam
• [PATCH 1/2] imx8mm-cl-iot-gate: Do not build fip.bin by default   Fabio Estevam
• [PATCH v2] dm: usb: add hook for low level usb init   Simon-Pierre Allaire
• u-boot & ZFS   ChrisO
• U-Boot sunxi DM_I2C migration?   Tom Rini
• [PATCH 11/13] Convert CONFIG_SYS_I2C_SOFT et al to Kconfig   Tom Rini
• [PATCH 05/13] siemens: Move CONFIG_SYS_I2C_EEPROM_ADDR usage out of CONFIG namespace   Tom Rini
• u-boot & ZFS   Tom Rini
• u-boot & ZFS   Mark Kettenis
• [PATCH] imx8mm-evk: Generate a single bootable flash.bin again   Frieder Schrempf
• [PATCH v2 15/16] clk: Detect failure to set defaults   Harm Berntsen
• u-boot & ZFS   Dimitri John Ledkov
• [EXT] Re: [PATCH 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [PATCH] imx8mm-evk: Generate a single bootable flash.bin again   Heiko Schocher
• [PATCH] mkimage: use environment variable MKIMAGE_SIGN_PIN to set pin for OpenSSL Engine   Alex G.
• u-boot & ZFS   ChrisO
• [PATCH] imx8mm-evk: Generate a single bootable flash.bin again   Tim Harvey
• [PATCH 1/3] spi: rockchip_sfc: Impletment set_speed logic   Chris Morgan
• [PATCH 3/3] rockchip: px30: Change sfc node to match upstream linux proposed   Chris Morgan
• u-boot & ZFS   ChrisO
• [PATCH v2] imx8mm-evk: Generate a single bootable flash.bin again   Fabio Estevam
• A mea culpa undefined reference in v2021.10-rc2, padding_algos, linker lists   Alex G.
• [PATCH v2] imx: spl: fix imx8m secure boot   Tim Harvey
• [PATCH 1/2] imx8mm-cl-iot-gate: Do not build fip.bin by default   Paul Liu
• [PATCH 1/2] imx8mm-cl-iot-gate: Do not build fip.bin by default   Fabio Estevam
• [PATCH 1/5] board: gateworks: venice: display hwmon details by default   Tim Harvey
• [PATCH 2/5] board: gateworks: venice: do not overwrite serial#   Tim Harvey
• [PATCH 3/5] arm: dts: imx8mm-venice-gw700x: fix mp5416 pmic config   Tim Harvey
• [PATCH 4/5] board: gateworks: venice: update thermal temp thresholds per cpu grade   Tim Harvey
• [PATCH 5/5] arm: dts: imx8mm-venice*: remove thermal zone overrides   Tim Harvey
• [PATCH 2/5] board: gateworks: venice: do not overwrite serial#   Fabio Estevam
• [PATCH 2/5] board: gateworks: venice: do not overwrite serial#   Tim Harvey
• [PATCH 2/5] board: gateworks: venice: do not overwrite serial#   Fabio Estevam
• [PATCH v2 1/5] board: gateworks: venice: display hwmon details by default   Tim Harvey
• [PATCH v2 2/5] board: gateworks: venice: do not overwrite serial#   Tim Harvey
• [PATCH v2 3/5] arm: dts: imx8mm-venice-gw700x: fix mp5416 pmic config   Tim Harvey
• [PATCH v2 4/5] board: gateworks: venice: update thermal temp thresholds per cpu grade   Tim Harvey
• [PATCH v2 5/5] arm: dts: imx8mm-venice*: remove thermal zone overrides   Tim Harvey
• [PATCH] image: rsa: Move padding_algos to linker lists   Alexandru Gagniuc
• [PATCH 2/5] board: gateworks: venice: do not overwrite serial#   Tim Harvey
• [PATCH 1/2] imx8mm-cl-iot-gate: Do not build fip.bin by default   Fabio Estevam
• RISC-V MC at Plumbers   Palmer Dabbelt
• [PATCH 1/2] spi: rockchip_sfc: Impletment set_speed logic   Jon Lin
• [PATCH 2/2] spi: rockchip_sfc: Using read_poll   Jon Lin
• [PATCH 3/3] rockchip: px30: Change sfc node to match upstream linux proposed   Jon Lin
• [PATCH v2 1/2] spi: rockchip_sfc: Impletment set_speed logic   Jon Lin
• [PATCH v2 2/2] spi: rockchip_sfc: Using read_poll   Jon Lin
• [PATCH 00/16] Further I2C Kconfig migrations   Tom Rini
• [PATCH 01/16] Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACY   Tom Rini
• [PATCH 02/16] Convert CONFIG_SYS_I2C_EARLY_INIT to Kconfig   Tom Rini
• [PATCH 03/16] i2c: designware: Remove unused non-DM functionality   Tom Rini
• [PATCH 04/16] am335x: Drop non-DM_I2C code   Tom Rini
• [PATCH 05/16] am43xx: Drop non-DM_I2C code   Tom Rini
• [PATCH 06/16] ti: i2c: Convert CONFIG_SYS_OMAP24_I2C to CONFIG_SYS_I2C namespace   Tom Rini
• [PATCH 07/16] i2c: Remove non-DM code from ihs_i2c.c   Tom Rini
• [PATCH 08/16] cmd/i2c.c: Remove unused legacy code   Tom Rini
• [PATCH 09/16] Convert CONFIG_SYS_I2C_SPEED et al to Kconfig   Tom Rini
• [PATCH 10/16] Convert CONFIG_SYS_I2C_MXC et al to Kconfig   Tom Rini
• [PATCH 11/16] rcar: i2c: Migrate SYS_I2C_SH to Kconfig   Tom Rini
• [PATCH 12/16] i2c: fsl_i2c: Migrate to Kconfig   Tom Rini
• [PATCH 13/16] tegra: Cleanup I2C support   Tom Rini
• [PATCH 14/16] Convert CONFIG_I2C_SET_DEFAULT_BUS_NUM et al to Kconfig   Tom Rini
• [PATCH 15/16] README: Remove some old i2c related text   Tom Rini
• [PATCH 16/16] varisys: Remove dead code   Tom Rini
• [PATCH 00/11] sandbox: Minor fixes and improvements   Simon Glass
• [PATCH 01/11] dtoc: Further improve documentation about warnings   Simon Glass
• [PATCH 02/11] sandbox: Correct handling of --rm_memory   Simon Glass
• [PATCH 03/11] sandbox: Add license headers to the dts files   Simon Glass
• [PATCH 04/11] btrfs: Suppress the message about missing filesystem   Simon Glass
• [PATCH 05/11] sqfs: Suppress the message about missing filesystem   Simon Glass
• [PATCH 06/11] test: Tidy a comment in the bloblist test   Simon Glass
• [PATCH 07/11] dm: core: Fix a few incorrect comments on first/next functions   Simon Glass
• [PATCH 08/11] sandbox: Add a way to find the size of a file   Simon Glass
• [PATCH 09/11] sandbox: Add a way to map a file into memory   Simon Glass
• [PATCH 10/11] sandbox: mmc: Support a backing file   Simon Glass
• [PATCH 11/11] test: Add a way to skip console checking until a string matches   Simon Glass
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Simon Glass
• [PATCH 01/28] Create a new boot/ directory   Simon Glass
• [PATCH 02/28] pxe: Move API comments to the header files   Simon Glass
• [PATCH 03/28] pxe: Use a context pointer   Simon Glass
• [PATCH 04/28] pxe: Move do_getfile() into the context   Simon Glass
• [PATCH 05/28] pxe: Add a userdata field to the context   Simon Glass
• [PATCH 06/28] pxe: Tidy up the is_pxe global   Simon Glass
• [PATCH 07/28] pxe: Move pxe_utils files   Simon Glass
• [PATCH 08/28] pxe: Tidy up some comments in pxe_utils   Simon Glass
• [PATCH 09/28] pxe: Tidy up code style a little in pxe_utils   Simon Glass
• [PATCH 10/28] pxe: Move common parsing coding into pxe_util   Simon Glass
• [PATCH 11/28] pxe: Clean up the use of bootfile   Simon Glass
• [PATCH 12/28] pxe: Drop get_bootfile_path()   Simon Glass
• [PATCH 13/28] lib: Add tests for simple_itoa()   Simon Glass
• [PATCH 14/28] lib: Add a function to convert a string to a hex value   Simon Glass
• [PATCH 15/28] pxe: Return the file size from the getfile() function   Simon Glass
• [PATCH 16/28] pxe: Refactor sysboot to have one helper   Simon Glass
• [PATCH 17/28] doc: Move distro boot doc to rST   Simon Glass
• [PATCH 18/28] pxe: Allow calling the pxe_get logic directly   Simon Glass
• [PATCH 19/28] bootmethod: Add the uclass and core implementation   Simon Glass
• [PATCH 20/28] bootmethod: Add an implementation of distro boot   Simon Glass
• [PATCH 21/28] bootmethod: Add a command   Simon Glass
• [PATCH 22/28] bootflow: Add a command   Simon Glass
• [PATCH 23/28] bootmethod: Add tests for bootmethod and bootflow   Simon Glass
• [PATCH 24/28] bootmethod: doc: Add documentation   Simon Glass
• [PATCH 25/28] mmc: Allow for children other than the block device   Simon Glass
• [PATCH 26/28] mmc: Add a bootmethod   Simon Glass
• [PATCH 27/28] ethernet: Add a bootmethod   Simon Glass
• [PATCH 28/28] RFC: rpi: Switch over to use bootflow   Simon Glass
• EFI from usb HDD   AKASHI Takahiro
• [PATCH v2] imx: spl: fix imx8m secure boot   Heiko Schocher
• EFI from usb HDD   Michal Simek
• [EXT] Re: [PATCH 05/15] i.MX6: Enable Job ring driver model in U-Boot.   Gaurav Jain
• [PATCH 1/4] drivers: ddr: util.c: Fix divide by zero issue   Priyanka Singh
• [PATCH 2/4] drivers: ddr: fsl_ddr_gen4.c: Fix divide by zero issue   Priyanka Singh
• [PATCH 3/4] drivers: ddr: main.c: Fix Bad Shift operator issue   Priyanka Singh
• [PATCH 4/4] board: freescale: t104xrdb: Set popts->cpo_sample to 0x54 for DDR3   Priyanka Singh
• [PATCH] configs: ls1046aqds: Move CONFIG_SPI_FLASH_* definitions to defconfigs   Kuldeep Singh
• [PATCH 05/11] sqfs: Suppress the message about missing filesystem   Miquel Raynal
• [PATCH v2 1/1] board: freescale: t104xrdb: Set popts->cpo_sample to 0x54 for DDR3   Priyanka Singh
• [PATCH 1/2] imx8mm-cl-iot-gate: Do not build fip.bin by default   Frieder Schrempf
• [PATCH 04/13] keymile: Use CONFIG_SYS_IVM_EEPROM_ADR   Aleksandar Gerasimovski
• [PULL] u-boot-riscv/master   Leo Liang
• [PATCH v4 1/2] imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)   Frieder Schrempf
• [PATCH v4 2/2] imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x)   Frieder Schrempf
• [PATCH v6 00/12] handling all DM watchdogs in watchdog_reset()   Rasmus Villemoes
• [PATCH v6 01/12] watchdog: wdt-uclass.c: use wdt_start() in wdt_expire_now()   Rasmus Villemoes
• [PATCH v6 02/12] watchdog: wdt-uclass.c: introduce struct wdt_priv   Rasmus Villemoes
• [PATCH v6 03/12] watchdog: wdt-uclass.c: neaten UCLASS_DRIVER definition   Rasmus Villemoes
• [PATCH v6 04/12] watchdog: wdt-uclass.c: refactor initr_watchdog()   Rasmus Villemoes
• [PATCH v6 05/12] watchdog: wdt-uclass.c: keep track of each device's running state   Rasmus Villemoes
• [PATCH v6 06/12] sandbox: disable CONFIG_WATCHDOG_AUTOSTART   Rasmus Villemoes
• [PATCH v6 07/12] watchdog: wdt-uclass.c: add wdt_stop_all() helper   Rasmus Villemoes
• [PATCH v6 08/12] board: x530: switch to wdt_stop_all()   Rasmus Villemoes
• [PATCH v6 09/12] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Rasmus Villemoes
• [PATCH v6 10/12] watchdog: add gpio watchdog driver   Rasmus Villemoes
• [PATCH v6 11/12] sandbox: add test of wdt_gpio driver   Rasmus Villemoes
• [PATCH v6 12/12] sandbox: add test of wdt-uclass' watchdog_reset()   Rasmus Villemoes
• [PATCH 08/11] sandbox: Add a way to find the size of a file   Marek Behún
• [PATCH 09/11] sandbox: Add a way to map a file into memory   Marek Behún
• [PATCH 04/11] btrfs: Suppress the message about missing filesystem   Marek Behún
• [PATCH 5/7] imx: makefile: drop the use of imx8mimage.sh   Frieder Schrempf
• [PATCH 04/11] btrfs: Suppress the message about missing filesystem   Qu Wenruo
• status="ok" treated as disabled by DM   Roger Quadros
• [PATCH] board: atmel: sama7g5ek: avoid rewriting of configured CONFIG_BOOTCOMMAND   Eugen Hristev
• [PATCH v5 09/12] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Wolfgang Denk
• [PATCH 1/3] lib/circbuf: Make circbuf selectable symbol   Loic Poulain
• [PATCH 2/3] usb: gadget: Add CDC ACM function   Loic Poulain
• [PATCH 3/3] cmd: add acmconsole command   Loic Poulain
• [PATCH 00/10] xilinx: Add support for DTB reselection   Michal Simek
• [PATCH 01/10] xilinx: fru: Replace spaces with \0 in detected name   Michal Simek
• [PATCH 02/10] xilinx: Use variable for passing board_name   Michal Simek
• [PATCH 03/10] xilinx: common: Change board_info[] handling   Michal Simek
• [PATCH 04/10] xilinx: common: Free allocated structure   Michal Simek
• [PATCH 05/10] xilinx: Add support for generic board detection   Michal Simek
• [PATCH 06/10] xilinx: zynqmp: Check that DT is 64bit aligned   Michal Simek
• [PATCH 07/10] Makefile: Align fit-dtb.blob and u-boot.itb by 64bits for 64bit systems   Michal Simek
• [PATCH 08/10] arm64: dts: Make sure that all DTBs are 64bit aligned for 64bit systems   Michal Simek
• [PATCH 09/10] xilinx: zynqmp: Generate different u-boot.itb for MULTI_DTB_FIT   Michal Simek
• [PATCH 10/10] xilinx: common: Enabling generic function for DT reselection   Michal Simek
• [PATCH 05/16] am43xx: Drop non-DM_I2C code   Lokesh Vutla
• [PATCH] configs: Layerscape: Remove the 'fdt_addr' env   Wolfgang Denk
• [PATCH v6 05/12] watchdog: wdt-uclass.c: keep track of each device's running state   Wolfgang Denk
• status="ok" treated as disabled by DM   Nishanth Menon
• [PATCH v6 07/12] watchdog: wdt-uclass.c: add wdt_stop_all() helper   Wolfgang Denk
• [PATCH v6 09/12] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Wolfgang Denk
• [PATCH v6 10/12] watchdog: add gpio watchdog driver   Wolfgang Denk
• [PATCH v1 1/7] i2c: stm32f7: move driver data of each instance in a privdata   Patrice CHOTARD
• [PATCH v1 2/7] arm: dts: stm32: Add i2c-analog-filter property in I2C nodes for stm32f746   Patrice CHOTARD
• [PATCH v1 3/7] arm: dts: stm32: Add i2c-analog-filter property in I2C nodes for stm32h743   Patrice CHOTARD
• [PATCH v1 4/7] i2c: stm32f7: support DT binding i2c-analog-filter   Patrice CHOTARD
• [PATCH v1 5/7] i2c: stm32f7: fix configuration of the digital filter   Patrice CHOTARD
• [PATCH v1 6/7] i2c: stm32f7: add support for DNF i2c-digital-filter binding   Patrice CHOTARD
• [PATCH v1 7/7] i2c: stm32f7: compute i2cclk only one time   Patrice CHOTARD
• [PATCH v6 10/12] watchdog: add gpio watchdog driver   Rasmus Villemoes
• [PATCH v6 10/12] watchdog: add gpio watchdog driver   Wolfgang Denk
• [PATCH v5 09/12] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Tom Rini
• [PATCH v6 10/12] watchdog: add gpio watchdog driver   Tom Rini
• [PATCH v6 10/12] watchdog: add gpio watchdog driver   Wolfgang Denk
• [PATCH v6 10/12] watchdog: add gpio watchdog driver   Tom Rini
• [PATCH] Revert "configs: synquacer: Make U-Boot binary position independent"   Masami Hiramatsu
• [PATCH] xilinx: zynqmp: Enable gpio-key/button driver   Michal Simek
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Tom Rini
• [PULL] u-boot-riscv/master   Tom Rini
• [PATCH v6 10/12] watchdog: add gpio watchdog driver   Wolfgang Denk
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Simon Glass
• [PATCH v6 10/12] watchdog: add gpio watchdog driver   Simon Glass
• [PATCH v6 10/12] watchdog: add gpio watchdog driver   Wolfgang Denk
• [PATCH 1/2] armv8: Disable pointer authentication traps for EL1   Andre Przywara
• [PATCH v2 0/6] Armv8r64 + BASER_FVP board support   Peter Hoyes
• [PATCH v2 1/6] armv8: Disable pointer authentication traps for EL1   Peter Hoyes
• [PATCH v2 2/6] armv8: Ensure EL1&0 VMSA is enabled   Peter Hoyes
• [PATCH v2 3/6] armv8: Add ARMv8 MPU configuration logic   Peter Hoyes
• [PATCH v2 4/6] vexpress64: Add BASER_FVP vexpress board variant   Peter Hoyes
• [PATCH v2 5/6] arm: Use armv8_switch_to_el1 env to switch to EL1   Peter Hoyes
• [PATCH v2 6/6] doc: Add documentation for the Arm vexpress board configs   Peter Hoyes
• [PATCH 07/10] Makefile: Align fit-dtb.blob and u-boot.itb by 64bits for 64bit systems   Andre Przywara
• A mea culpa undefined reference in v2021.10-rc2, padding_algos, linker lists   Simon Glass
• [PATCH 07/10] Makefile: Align fit-dtb.blob and u-boot.itb by 64bits for 64bit systems   Michal Simek
• [PATCH 08/10] arm64: dts: Make sure that all DTBs are 64bit aligned for 64bit systems   Andre Przywara
• [PATCH 07/10] Makefile: Align fit-dtb.blob and u-boot.itb by 64bits for 64bit systems   Tom Rini
• [PATCH 07/10] Makefile: Align fit-dtb.blob and u-boot.itb by 64bits for 64bit systems   Michal Simek
• [PATCH 08/10] arm64: dts: Make sure that all DTBs are 64bit aligned for 64bit systems   Michal Simek
• [PATCH 07/10] Makefile: Align fit-dtb.blob and u-boot.itb by 64bits for 64bit systems   Tom Rini
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Tom Rini
• [PATCH] nand: vf610_nfc: Do not abuse CONFIG namespace   Tom Rini
• [PATCH] arm: Migrate GICV2 / GICV3 to Kconfig   Tom Rini
• [PATCH] ppc: Rework some hard-coded BOOTCOMMANDS   Tom Rini
• [PATCH] imx8mm-evk: Generate a single bootable flash.bin again   Frieder Schrempf
• [PATCH] i8042: Do not abuse CONFIG namespace   Tom Rini
• [PATCH] imx8mm-evk: Generate a single bootable flash.bin again   Fabio Estevam
• [PATCH] global: Remove dead code that starts with CONFIG_[0-9A]   Tom Rini
• [PATCH] video: Remove ati_radeon_fb   Tom Rini
• [PATCH] spi: altera_spi: Do not abuse CONFIG namespace   Tom Rini
• [PATCH] imx8mm-evk: Generate a single bootable flash.bin again   Frieder Schrempf
• [PATCH] imx8mm-evk: Generate a single bootable flash.bin again   Marcel Ziswiler
• [PATCH] mpc83xx: Update comment   Tom Rini
• [PATCH] astro_mcf5373l: Rework ASTRO_ID logic   Tom Rini
• [PATCH] imx8mm-evk: Generate a single bootable flash.bin again   Marcel Ziswiler
• [PATCH v3 1/2] imx8mm-evk: Generate a single bootable flash.bin again   Fabio Estevam
• [PATCH v3 2/2] Makefile: Clean the i.MX8MM artifacts   Fabio Estevam
• [PATCH] Kconfig: Use spaces not tabs in Kconfig entires   Tom Rini
• [PATCH 1/2] imx8mm-cl-iot-gate: Do not build fip.bin by default   Paul Liu
• [PATCH 1/2] imx8mm-cl-iot-gate: Do not build fip.bin by default   Paul Liu
• [PATCH] ARM: meson: Add S905Y2 SOC ID   Christian Hewitt
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   AKASHI Takahiro
• [PATCH v3 2/2] Makefile: Clean the i.MX8MM artifacts   Heiko Thiery
• [PATCH v3 1/2] imx8mm-evk: Generate a single bootable flash.bin again   Heiko Thiery
• [PATCH v6 10/12] watchdog: add gpio watchdog driver   Rasmus Villemoes
• [PATCH 3/4] ARM: dts: at91: sama5d2: fix dtc warning for ohci and ehci   Alexander Dahl
• binman should create a list of output files   Heiko Thiery
• [PATCH v3 2/2] Makefile: Clean the i.MX8MM artifacts   Heiko Thiery
• [PATCH v2 0/4] Add octal DTR support for Macronix flash   JaimeLiao
• [PATCH v2 1/4] mtd: spi-nor: macronix: add support for Macronix Octal flash   JaimeLiao
• [PATCH v2 2/4] mtd: spi-nor-core: Adding different type of command extension in Soft Reset   JaimeLiao
• [PATCH v2 3/4] mtd: spi-nor-core: set 4byte opcode when possible   JaimeLiao
• [PATCH v2 4/4] mtd: spi-nor-core: Add support for Macronix Octal flash   JaimeLiao
• [PATCH v3 1/2] imx8mm-evk: Generate a single bootable flash.bin again   Marcel Ziswiler
• [PATCH] i8042: Do not abuse CONFIG namespace   Bin Meng
• [PATCH] mpc83xx: Update comment   Bin Meng
• [PATCH] video: Remove ati_radeon_fb   Bin Meng
• [PATCH] spi: altera_spi: Do not abuse CONFIG namespace   Bin Meng
• [PATCH] nand: vf610_nfc: Do not abuse CONFIG namespace   Bin Meng
• status="ok" treated as disabled by DM   Roger Quadros
• [PATCH] ARM: dts: Fix node status to "okay" on TI boards   Roger Quadros
• [PATCH v3 1/2] imx8mm-evk: Generate a single bootable flash.bin again   Fabio Estevam
• [PATCH v3 1/2] imx8mm-evk: Generate a single bootable flash.bin again   Heiko Thiery
• Remove the gitlab-ci-runner on source.denx.de?   Bin Meng
• [PATCH] configs: ls1046aqds: Configure environment related configs   Kuldeep Singh
• [PATCH] global: Remove dead code that starts with CONFIG_[0-9A]   Rasmus Villemoes
• [PATCH 5/7] imx: makefile: drop the use of imx8mimage.sh   Marcel Ziswiler
• [PATCH] global: Remove dead code that starts with CONFIG_[0-9A]   Tom Rini
• [PATCH v3 1/2] imx8mm-evk: Generate a single bootable flash.bin again   Marcel Ziswiler
• [PATCH v2 1/6] armv8: Disable pointer authentication traps for EL1   Andre Przywara
• [PATCH v6 10/12] watchdog: add gpio watchdog driver   Simon Glass
• [PATCH v2 1/6] armv8: Disable pointer authentication traps for EL1   Michael Walle
• [PATCH v2 3/6] armv8: Add ARMv8 MPU configuration logic   Andre Przywara
• [RFC PATCH 0/6] Add C tests for hush   Francis Laniel
• [RFC PATCH 1/6] test: Add framework to test hush behavior.   Francis Laniel
• [RFC PATCH 2/6] test: hush: Test hush if/else.   Francis Laniel
• [RFC PATCH 3/6] test/py: hush_if_test: Remove the test file.   Francis Laniel
• [RFC PATCH 4/6] test: hush: Test hush variable expansion.   Francis Laniel
• [RFC PATCH 5/6] test: hush: Test hush commands list.   Francis Laniel
• [RFC PATCH 6/6] test: hush: Test hush loops.   Francis Laniel
• How should we deal with actual hush odd behavior?   Francis Laniel
• [v6 15/17] arm: dts: Add base dtsi and devkit dts for Intel N5X device   Ley Foon Tan
• [PATCH v2 5/6] arm: Use armv8_switch_to_el1 env to switch to EL1   Andre Przywara
• [PATCH v2 5/6] arm: Use armv8_switch_to_el1 env to switch to EL1   Tom Rini
• [PATCH 1/2] doc: rockchip: sort rockchip support list for rk3188   Johan Jonker
• [PATCH 2/2] doc: rockchip: write all brand names with a capital   Johan Jonker
• [PATCH] ARM: dts: Fix node status to "okay" on TI boards   Nishanth Menon
• [PATCH v2 15/16] clk: Detect failure to set defaults   Simon Glass
• [PATCH v6 10/12] watchdog: add gpio watchdog driver   Simon Glass
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Simon Glass
• How should we deal with actual hush odd behavior?   Simon Glass
• binman should create a list of output files   Simon Glass
• [PATCH V4] clk: clk_versaclock: Add support for versaclock driver   Adam Ford
• [PATCH V4] clk: clk_versaclock: Add support for versaclock driver   Sean Anderson
• Pull request for efi-2021-10-rc3   Heinrich Schuchardt
• Pull request for efi-2021-10-rc3   Simon Glass
• [PATCH v1 0/7] board: toradex: verdin-imx8mm: target refresh   Marcel Ziswiler
• [PATCH v1 1/7] imx: mkimage_fit_atf: fix legacy image generation   Marcel Ziswiler
• [PATCH v1 2/7] imx8m: clean-up kconfig indentation   Marcel Ziswiler
• [PATCH v1 3/7] verdin-imx8mm: fix ethernet   Marcel Ziswiler
• [PATCH v1 4/7] ARM: dts: imx8mm-verdin: prepare for dek blob encapsulation   Marcel Ziswiler
• [PATCH v1 5/7] verdin-imx8mm: switch to use binman to pack images   Marcel Ziswiler
• [PATCH v1 6/7] verdin-imx8mm: enable sleep_moci output   Marcel Ziswiler
• [PATCH v1 7/7] verdin-imx8mm: drop support for v1.0 hardware   Marcel Ziswiler
• [PATCH] rockchip: px30: sync serial flash controller bindings with mainline   Chris Morgan
• [u-boot-test-hooks PATCH] Update Contributing.md with up-to-date information   Bin Meng
• [u-boot-test-hooks PATCH] travis-ci: Correct the memory size for Xilinx Zynq QEMU   Bin Meng
• [PATCH 1/9] Kconfig: Use spaces not tabs in Kconfig entires   Tom Rini
• [PATCH 2/9] global: Remove unused or unnecessary CONFIG symbols related to DDR   Tom Rini
• [PATCH 3/9] mvebu: Migrate CONFIG_DDR_32BIT/64BIT to Kconfig   Tom Rini
• [PATCH 4/9] mvebu: ddr: Rename CONFIG_DDR_FIXED_SIZE to CONFIG_SYS_SDRAM_SIZE   Tom Rini
• [PATCH 5/9] mvebe: Migrate CONFIG_DDR_LOG_LEVEL to Kconfig   Tom Rini
• [PATCH 6/9] ddr: Migrate DDR_SPD to Kconfig   Tom Rini
• [PATCH 7/9] nxp: Migrate CONFIG_DDR_CLK_FREQ to Kconfig   Tom Rini
• [PATCH 8/9] nxp: Migrate a number of DDR related symbols to Kconfig   Tom Rini
• [PATCH 9/9] Convert CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT to Kconfig   Tom Rini
• [PATCH 00/11] sunxi: Migrate to DM_I2C   Samuel Holland
• [PATCH 01/11] i2c: Add a DM_I2C wrapper for the sun6i_p2wi controller   Samuel Holland
• [PATCH 02/11] i2c: Add a DM_I2C wrapper for the sun8i_rsb controller   Samuel Holland
• [PATCH 03/11] power: pmic: Consistently depend on DM_PMIC   Samuel Holland
• [PATCH 04/11] power: pmic: Make the uclass optional in SPL   Samuel Holland
• [PATCH 05/11] power: pmic: Add a driver for X-Powers AXP PMICs   Samuel Holland
• [PATCH 06/11] sunxi: Select SUN8I_RSB more carefully   Samuel Holland
• [PATCH 07/11] sunxi: pmic_bus: Fix Kconfig dependencies   Samuel Holland
• [PATCH 08/11] sunxi: pmic_bus: Clean up preprocessor conditions   Samuel Holland
• [PATCH 09/11] sunxi: pmic_bus: Use the DM PMIC interface when possible   Samuel Holland
• [PATCH 10/11] sunxi: video: Convert panel I2C to use DM_I2C   Samuel Holland
• [PATCH 11/11] sunxi: Enable DM_I2C for all sunxi boards   Samuel Holland
• [PATCH] i2c: i2c-gpio: Support the named GPIO binding   Samuel Holland
• [PATCH v2] ARM: Prevent the compiler from using NEON registers   Samuel Holland
• [PATCH v2 0/4] mkimage: sunxi_egon: add riscv support   Samuel Holland
• [PATCH 0/4] sunxi: TOC0 image type support   Samuel Holland
• [PATCH v2 0/4] sunxi: TOC0 image type support   Samuel Holland
• [PATCH v2 1/4] tools: Separate image types which depend on OpenSSL   Samuel Holland
• [PATCH v2 2/4] tools: mkimage: Add Allwinner TOC0 support   Samuel Holland
• [PATCH v2 3/4] sunxi: Support SPL in both eGON and TOC0 images   Samuel Holland
• [PATCH v2 4/4] sunxi: Support building a SPL as a TOC0 image   Samuel Holland
• [u-boot-test-hooks PATCH] travis-ci: Add SiFive Unleashed QEMU targets   Bin Meng
• [PATCH] mailmap: Update e-mail for Jernej Skrabec   Jernej Skrabec
• [PATCH] cmd: ubi: add a command to swap volumes   Heiko Schocher
• [PATCH 01/11] i2c: Add a DM_I2C wrapper for the sun6i_p2wi controller   Heiko Schocher
• [PATCH 02/11] i2c: Add a DM_I2C wrapper for the sun8i_rsb controller   Heiko Schocher
• [PATCH 10/11] sunxi: video: Convert panel I2C to use DM_I2C   Heiko Schocher
• [PATCH 11/11] sunxi: Enable DM_I2C for all sunxi boards   Heiko Schocher
• [PATCH] i2c: i2c-gpio: Support the named GPIO binding   Heiko Schocher
• [PATCH v2 1/4] tools: Separate image types which depend on OpenSSL   Pali Rohár
• [PATCH v2 2/4] tools: mkimage: Add Allwinner TOC0 support   Pali Rohár
• [PATCH v1 1/7] imx: mkimage_fit_atf: fix legacy image generation   ZHIZHIKIN Andrey
• [PATCH] tools: kwbimage: Remove comment about unimplemented register headers in v1 images   Pali Rohár
• [PATCH 4/9] mvebu: ddr: Rename CONFIG_DDR_FIXED_SIZE to CONFIG_SYS_SDRAM_SIZE   Marek Behún
• [PATCH 4/9] mvebu: ddr: Rename CONFIG_DDR_FIXED_SIZE to CONFIG_SYS_SDRAM_SIZE   Pali Rohár
• SPL SPI boot problem after commit "spi: Update speed/mode on change"   Marek Vasut
• [PATCH 0/4] sunxi: TOC0 image type support   Tom Rini
• [PATCH] rpi: Copy properties from firmware dtb to the loaded dtb   Sjoerd Simons
• SPL SPI boot problem after commit "spi: Update speed/mode on change"   Oskari Lemmelä
• SPL SPI boot problem after commit "spi: Update speed/mode on change"   Marek Vasut
• [PATCH 1/3] fs/erofs: new filesystem   Huang Jianan
• [PATCH 2/3] fs/erofs: add lz4 1.8.3 decompressor   Huang Jianan
• [PATCH 3/3] fs/erofs: add lz4 decompression support   Huang Jianan
• [PATCH 01/11] i2c: Add a DM_I2C wrapper for the sun6i_p2wi controller   Samuel Holland
• [PATCH v2 1/4] tools: Separate image types which depend on OpenSSL   Samuel Holland
• [PATCH v2 2/4] tools: mkimage: Add Allwinner TOC0 support   Samuel Holland
• [PATCH v2 2/4] tools: mkimage: Add Allwinner TOC0 support   Pali Rohár
• [PATCH] sunxi: Select SPL_SEPARATE_BSS   Samuel Holland
• [PATCH 1/3] watchdog: Add a driver for the sunxi watchdog   Samuel Holland
• [PATCH 2/3] sunxi: Enable watchdog timer support by default   Samuel Holland
• [PATCH 3/3] sunxi: dts: H616: Enable the watchdog   Samuel Holland
• [PATCH 0/4] Improved sysreset/watchdog uclass integration   Samuel Holland
• [PATCH 1/4] sysreset: Add uclass Kconfig dependency to drivers   Samuel Holland
• [PATCH 2/4] sysreset: Mark driver probe functions as static   Samuel Holland
• [PATCH 3/4] sysreset: watchdog: Move watchdog reference to plat data   Samuel Holland
• [PATCH 4/4] watchdog: Automatically register device with sysreset   Samuel Holland
• [PATCH] sunxi: Avoid duplicate reset_cpu with SYSRESET enabled   Samuel Holland
• [PATCH v2] Fix flash and erase of eMMC Boot2 with Fastboot   Tom Rini
• [PATCH v4] Fix flashing of eMMC user area with Fastboot   Tom Rini
• [PATCH V4] clk: clk_versaclock: Add support for versaclock driver   Tom Rini
• [PATCH v2] tiny-printf: Handle %pM format when CONFIG_SPL_NET_SUPPORT is enabled   Tom Rini
• [PATCH] display_options: Do not use %llu in print_size   Tom Rini
• [PATCH 0/4] sunxi: TOC0 image type support   Vagrant Cascadian
• [PATCH 0/4] power: axp: Move poweroff to DM_PMIC/SYSRESET driver   Samuel Holland
• [PATCH 1/4] include: axp_pmic: Add missing header guard definition   Samuel Holland
• [PATCH 2/4] include: axp_pmic: Include headers for all variants   Samuel Holland
• [PATCH 3/4] power: axp: Avoid do_poweroff conflict with sysreset   Samuel Holland
• [PATCH 4/4] power: pmic: axp: Implement poweroff via sysreset   Samuel Holland
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   AKASHI Takahiro
• [PATCH 1/4] mtd: spi-nor: macronix: add support for Macronix octaflash   liao jaime
• [PATCH 0/1] imx8m: Restrict usable memory based on rom_pointer[0]   Ying-Chun Liu
• [PATCH 1/1] imx8m: Restrict usable memory based on rom_pointer[0]   Ying-Chun Liu
• [PATCH 0/1] arm: imx8m: imx8mm-cl-iot-gate: Add support for detect memory size   Ying-Chun Liu
• [PATCH 1/1] arm: imx8m: imx8mm-cl-iot-gate: Add support for detect memory size   Ying-Chun Liu
• [PATCH] configs: Layerscape: Remove the 'fdt_addr' env   Z.Q. Hou
• [PATCH 1/3] fs/erofs: new filesystem   Bin Meng
• [PATCH 01/11] i2c: Add a DM_I2C wrapper for the sun6i_p2wi controller   Heiko Schocher
• [PATCHv2 1/2] i2c: add dm_i2c_reg_clrset   Heiko Schocher
• [PATCHv2 2/2] gpio: mcp230xx: Introduce new driver   Heiko Schocher
• [PATCH v2 1/1] bootcount: add a new driver with syscon as backend   Heiko Schocher
• [PATCH] i2c: i2c-gpio: Support the named GPIO binding   Heiko Schocher
• [PATCH] ARM: dts: Fix node status to "okay" on TI boards   Lokesh Vutla
• [PATCH v1 5/7] verdin-imx8mm: switch to use binman to pack images   Heiko Thiery
• binman should create a list of output files   Heiko Thiery
• [PATCH] xilinx: zynqmp: Update descriptions for u-boot.its   Michal Simek
• [PATCH] ARM: dts: Fix node status to "okay" on TI boards   Roger Quadros
• [PATCH] arm64: zynqmp: Disable WDT_CDNS driver by default   Michal Simek
• [PATCH v2] xilinx: zynqmp: Initialize usb and scsi via preboot   Michal Simek
• [PATCH] arm64: zynqmp: Fix node name for ds35/36 leds   Michal Simek
• [PATCH] arm64: zynqmp: Fix header alignment on kv260 boards   Michal Simek
• [PATCH] arm64: zynqmp: Update comment style sm-k26   Michal Simek
• [PATCH] xilinx: Add jedec compatible string for QSPI (Zynq/ZynqMP)   Michal Simek
• [PATCH] ARM: zynq: Replace 'io-standard' with 'power-source' property   Michal Simek
• [PATCH] ARM: zynq: Wire single qspi on couple of boards   Michal Simek
• [PATCH] ARM: zynq: Enable smcc and nor for zc770-xm012   Michal Simek
• [PATCH] xilinx: Disable ARCH_FIXUP_FDT_MEMORY   Michal Simek
• [PATCH] fdt_support: Add kernel-doc for fdt_fixup_memory_banks()   Michal Simek
• [PATCH 0/4] xilinx: Add SoC Xilinx driver for zynqmp & versal   Michal Simek
• [PATCH] cmd: pwm: Remove additional pwm description   Michal Simek
• [PATCH] cmd: boot: Update reset usage message   Michal Simek
• [PATCH] xilinx: zynqmp: Add debug messages for boot mode   Michal Simek
• [PATCH] watchdog: versal: Include header file needed for dev_ functions   Michal Simek
• [PATCH] arm64: zynqmp: Enable sha1sum command   Michal Simek
• [PATCH v1 1/7] imx: mkimage_fit_atf: fix legacy image generation   Marcel Ziswiler
• [PATCH v1 5/7] verdin-imx8mm: switch to use binman to pack images   Marcel Ziswiler
• [PATCH V3] arm: add initial support for the Phytium Pomelo Board   nicholas_zheng at outlook.com
• [PATCH 00/10] xilinx: Add support for DTB reselection   Michal Simek
• [PATCH 01/10] xilinx: fru: Replace spaces with \0 in detected name   Michal Simek
• [PATCH 02/10] xilinx: Use variable for passing board_name   Michal Simek
• [PATCH 03/10] xilinx: common: Change board_info[] handling   Michal Simek
• [PATCH 04/10] xilinx: common: Free allocated structure   Michal Simek
• [PATCH 05/10] xilinx: Add support for generic board detection   Michal Simek
• [PATCH 06/10] xilinx: zynqmp: Check that DT is 64bit aligned   Michal Simek
• [PATCH 07/10] Makefile: Align fit-dtb.blob and u-boot.itb by 64bits   Michal Simek
• [PATCH 08/10] arm64: dts: Make sure that all DTBs are 64bit aligned   Michal Simek
• [PATCH 09/10] xilinx: zynqmp: Generate different u-boot.itb for MULTI_DTB_FIT   Michal Simek
• [PATCH 10/10] xilinx: common: Enabling generic function for DT reselection   Michal Simek
• [PATCH] ARM: mach-at91: fix multiple cpu_reset definition when enabling SYSRESET   Eugen.Hristev at microchip.com
• [PATCH 0/4] sunxi: TOC0 image type support   Peter Robinson
• [PATCH v1 1/7] imx: mkimage_fit_atf: fix legacy image generation   ZHIZHIKIN Andrey
• pull request of u-boot-fsl-qoriq for v2021.10   Priyanka Jain
• [PATCH] mailmap: Update e-mail for Jernej Skrabec   Andre Przywara
• [PATCH v1] pci: iproc: fix compilation errors and warnings   Bharat Kumar Reddy Gooty
• [PATCH v1 5/7] verdin-imx8mm: switch to use binman to pack images   Marcel Ziswiler
• [PATCH v1 5/7] verdin-imx8mm: switch to use binman to pack images   Heiko Thiery
• [PATCH v1 1/7] imx: mkimage_fit_atf: fix legacy image generation   Fabio Estevam
• [PATCH v6 10/12] watchdog: add gpio watchdog driver   Wolfgang Denk
• [PATCH 07/10] Makefile: Align fit-dtb.blob and u-boot.itb by 64bits   Andre Przywara
• How should we deal with actual hush odd behavior?   Wolfgang Denk
• [PATCH] mx7ulp: Allow to enable CONFIG_IMX_HAB   Oleksandr Suvorov
• [PATCH v3 1/2] imx8mm-evk: Generate a single bootable flash.bin again   Fabio Estevam
• [PATCH] mx7ulp: Allow to enable CONFIG_IMX_HAB   Fabio Estevam
• [PATCH 1/1] arm: imx8m: imx8mm-cl-iot-gate: Add support for detect memory size   Fabio Estevam
• [PATCH 1/3] fs/erofs: new filesystem   Huang Jianan
• [PATCH v3 1/2] imx8mm-evk: Generate a single bootable flash.bin again   Marcel Ziswiler
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Mark Kettenis
• [PATCH v2] mx7ulp: Allow to enable CONFIG_IMX_HAB   Oleksandr Suvorov
• [PATCH v3 1/2] imx8mm-evk: Generate a single bootable flash.bin again   Heiko Thiery
• [PATCH v3 1/2] imx8mm-evk: Generate a single bootable flash.bin again   Marcel Ziswiler
• [PATCH v4] imx8mm-evk: Generate a single bootable flash.bin again   Fabio Estevam
• [PATCH v3 1/2] imx8mm-evk: Generate a single bootable flash.bin again   Fabio Estevam
• [PATCH V2] ARM: rmobile: beacon-renesom: Enable QSPI NOR Flash   Adam Ford
• [PATCH v4] imx8mm-evk: Generate a single bootable flash.bin again   Marcel Ziswiler
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Ilias Apalodimas
• [PATCH v2 0/3] fs/erofs: new filesystem   Huang Jianan
• [PATCH v2 1/3] fs/erofs: add erofs filesystem support   Huang Jianan
• [PATCH v2 2/3] fs/erofs: add lz4 1.8.3 decompressor   Huang Jianan
• [PATCH v2 3/3] fs/erofs: add lz4 decompression support   Huang Jianan
• Bootcmd/key1/key2   Tim
• [PATCH v5] imx8mm-evk: Generate a single bootable flash.bin again   Fabio Estevam
• [PATCH v5] imx8mm-evk: Generate a single bootable flash.bin again   Heiko Thiery
• [PATCH V2] ARM: rmobile: beacon-renesom: Enable QSPI NOR Flash   Marek Vasut
• [PATCH v3 1/2] imx8mm-evk: Generate a single bootable flash.bin again   Heiko Thiery
• Remove the gitlab-ci-runner on source.denx.de?   Tom Rini
• [PATCH v1 0/2] Broadcom netXtreme driver and commands   Bharat Kumar Reddy Gooty
• [PATCH v1 1/2] net: brcm: netXtreme driver   Bharat Kumar Reddy Gooty
• [PATCH v1 2/2] cmd: brcm: netXtreme commands   Bharat Kumar Reddy Gooty
• [PATCH 1/3] qfw: Switch to CONFIG_SYS_LOAD_ADDR from CONFIG_LOADADDR   Tom Rini
• [PATCH 2/3] global: Convert CONFIG_LOADADDR to CONFIG_SYS_LOADADDR   Tom Rini
• [PATCH 3/3] Convert CONFIG_SYS_LOAD_ADDR to Kconfig   Tom Rini
• [PATCH v5 0/3] Support for Kontron Electronics i.MX6UL/ULL and i.MX8MM SoMs   Frieder Schrempf
• [PATCH v5 1/3] doc: board: kontron: sl28: Reduce section levels and change title   Frieder Schrempf
• [PATCH v5 2/3] imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)   Frieder Schrempf
• [PATCH v5 3/3] imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x)   Frieder Schrempf
• Remove the gitlab-ci-runner on source.denx.de?   Wolfgang Denk
• Remove the gitlab-ci-runner on source.denx.de?   Tom Rini
• [PATCH v2 0/9] board: toradex: verdin-imx8mm: target refresh   Marcel Ziswiler
• [PATCH v2 1/9] imx8m: clean-up kconfig indentation   Marcel Ziswiler
• [PATCH v2 2/9] verdin-imx8mm: fix ethernet   Marcel Ziswiler
• [PATCH v2 3/9] ARM: dts: imx8mm-verdin: prepare for dek blob encapsulation   Marcel Ziswiler
• [PATCH v2 4/9] verdin-imx8mm: switch to use binman to pack images   Marcel Ziswiler
• [PATCH v2 5/9] verdin-imx8mm: enable sleep_moci output   Marcel Ziswiler
• [PATCH v2 6/9] verdin-imx8mm: drop support for v1.0 hardware   Marcel Ziswiler
• [PATCH v2 7/9] include/configs: apalis-imx8/verdin-imx8mm: rename kernel image variable   Marcel Ziswiler
• [PATCH v2 8/9] verdin-imx8mm: use preboot for fdtfile evaluation   Marcel Ziswiler
• [PATCH v2 9/9] verdin-imx8mm: fix watchdog pinctrl issue   Marcel Ziswiler
• [PATCH v5 1/3] doc: board: kontron: sl28: Reduce section levels and change title   Michael Walle
• [PATCH 1/1] arm: imx8m: imx8mm-cl-iot-gate: Add support for detect memory size   Marcel Ziswiler
• [PATCH] ARM: omap3: evm: Enable booting 'fitImage' with DEFAULT_FIT_TI_ARGS   Derald Woods
• [PATCH V3] arm: add initial support for the Phytium Pomelo Board   Tom Rini
• [PATCH V2] ARM: rmobile: beacon-renesom: Enable QSPI NOR Flash   Adam Ford
• [PATCH v1 1/7] imx: mkimage_fit_atf: fix legacy image generation   ZHIZHIKIN Andrey
• pull request of u-boot-fsl-qoriq for v2021.10   Tom Rini
• [PATCH v6 10/12] watchdog: add gpio watchdog driver   Simon Glass
• binman should create a list of output files   Simon Glass
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Simon Glass
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Simon Glass
• [PATCH v1 1/7] imx: mkimage_fit_atf: fix legacy image generation   Fabio Estevam
• [PATCH v2 0/9] board: toradex: verdin-imx8mm: target refresh   Fabio Estevam
• [PATCH v5 0/3] Support for Kontron Electronics i.MX6UL/ULL and i.MX8MM SoMs   Fabio Estevam
• [PATCH v2 1/5] board: gateworks: venice: display hwmon details by default   Fabio Estevam
• [PATCH v2 4/9] verdin-imx8mm: switch to use binman to pack images   Heiko Thiery
• Pull request for efi-2021-10-rc3   Tom Rini
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Tom Rini
• [PATCH 1/1] arm: imx8m: imx8mm-cl-iot-gate: Add support for detect memory size   PaulLiu
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Tom Rini
• [PATCH] Convert CONFIG_MX7D to Kconfig   Tom Rini
• [PATCH 1/1] arm: imx8m: imx8mm-cl-iot-gate: Add support for detect memory size   Marcel Ziswiler
• [PATCH V2] ARM: rmobile: beacon-renesom: Enable QSPI NOR Flash   Marek Vasut
• [PATCH] psci: fix double declaration   Oleksandr Suvorov
• [PATCH v2] imx8mm-cl-iot-gate: Split the defconfigs   Fabio Estevam
• [PATCH v2] imx8mm-cl-iot-gate: Split the defconfigs   Paul Liu
• [u-boot-test-hooks PATCH] Update Contributing.md with up-to-date information   Tom Rini
• [u-boot-test-hooks PATCH] travis-ci: Correct the memory size for Xilinx Zynq QEMU   Tom Rini
• [u-boot-test-hooks PATCH] travis-ci: Add SiFive Unleashed QEMU targets   Tom Rini
• [PATCH v3] imx8mm-cl-iot-gate: Split the defconfigs   Fabio Estevam
• [PATCH v2 1/4] tools: Separate image types which depend on OpenSSL   Andre Przywara
• [PATCH 0/5] Fix FIT hash algos in SPL (Fixes v2021.10-rc2)   Alexandru Gagniuc
• [PATCH 1/5] common: Remove unused CONFIG_FIT_SHAxxx selectors   Alexandru Gagniuc
• [PATCH 2/5] lib: Drop SHA512_ALGO in lieu of SHA512   Alexandru Gagniuc
• [PATCH 3/5] common/spl: Drop SPL_HASH_SUPPORT in favor of SPL_HASH   Alexandru Gagniuc
• [PATCH 4/5] image: Drop if/elseif hash selection in calculate_hash()   Alexandru Gagniuc
• [PATCH 5/5] image: Drop IMAGE_ENABLE_{MD5, CRC32} #defines   Alexandru Gagniuc
• [PATCH 3/5] efi_loader: use correct type for AllocatePages, AllocatePool   AKASHI Takahiro
• [PATCH v2] powerpc: mpc: Put U-Boot version string at correct place by linker script   Christophe Leroy
• [PATCH 1/3] qfw: Switch to CONFIG_SYS_LOAD_ADDR from CONFIG_LOADADDR   Bin Meng
• Erroneous modification of u-boot's MAINTAINERS ?   Christophe Leroy
• [PATCH v2] powerpc: mpc: Put U-Boot version string at correct place by linker script   Christophe Leroy
• [PATCH] configs: fsl: migrate FMAN/QE specific defines to Kconfig   Priyanka Jain
• Erroneous modification of u-boot's MAINTAINERS ?   Alex Nemirovsky
• [PATCH 1/1] imx8m: Restrict usable memory based on rom_pointer[0]   Frieder Schrempf
• [PATCH] rpi: Copy properties from firmware dtb to the loaded dtb   Peter Robinson
• [PATCH][RFC] tree: imx: remove old fit generator script   Andrey Zhizhikin
• arm: mvebu: dts: Armada8k enable mdio   sven.auhagen at voleatech.de
• [PATCH v3] imx8mm-cl-iot-gate: Split the defconfigs   Paul Liu
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Ilias Apalodimas
• [PATCH] ARM: mach-at91: fix multiple cpu_reset definition when enabling SYSRESET   Clément Léger
• [PATCH v2 0/1] arm: imx8m: imx8mm-cl-iot-gate: Add support for detect memory size   Ying-Chun Liu
• [PATCH v2 1/1] arm: imx8m: imx8mm-cl-iot-gate: Add support for detect memory size   Ying-Chun Liu
• [PATCH v2] powerpc: mpc: Put U-Boot version string at correct place by linker script   Wolfgang Denk
• [PATCH] ARM: mach-at91: fix multiple cpu_reset definition when enabling SYSRESET   Eugen.Hristev at microchip.com
• [PATCH v1 0/2] pinctrl single: GPIO support   Bharat Kumar Reddy Gooty
• [PATCH v1 1/2] pinctrl: single: Parse gpio details from dt   Bharat Kumar Reddy Gooty
• [PATCH v1 2/2] pinctrl: single: Add request() api   Bharat Kumar Reddy Gooty
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Mark Kettenis
• [PATCH v2 1/1] arm: imx8m: imx8mm-cl-iot-gate: Add support for detect memory size   Fabio Estevam
• [PATCH 4/9] mvebu: ddr: Rename CONFIG_DDR_FIXED_SIZE to CONFIG_SYS_SDRAM_SIZE   Marek Behún
• [PATCH 3/9] mvebu: Migrate CONFIG_DDR_32BIT/64BIT to Kconfig   Marek Behún
• [PATCH 1/3] smegw01: Pass 'mmcpart' to the kernel command line   Fabio Estevam
• [PATCH 2/3] smegw01: Add redundant environment support   Fabio Estevam
• [PATCH 3/3] smegw01: Select IMX_HAB   Fabio Estevam
• [PATCH v2] ARM: dts: Fix node status to "okay" on TI boards   Roger Quadros
• [PATCH v2] powerpc: mpc: Put U-Boot version string at correct place by linker script   Pali Rohár
• [PATCH v2 0/6] Call phy_config at port probe time for the Felix DSA driver   Vladimir Oltean
• [PATCH v2 1/6] net: dsa: felix: felix_init() can be static   Vladimir Oltean
• [PATCH v2 2/6] net: dsa: use "err" instead of "ret" in dsa_port_probe   Vladimir Oltean
• [PATCH v2 3/6] net: dsa: refactor the code to set the port MAC address into a dedicated function   Vladimir Oltean
• [PATCH v2 4/6] net: dsa: introduce a .port_probe() method in struct dsa_ops   Vladimir Oltean
• [PATCH v2 5/6] net: dsa: felix: call phy_config at .port_probe() time   Vladimir Oltean
• [PATCH v2 6/6] net: dsa: felix: propagate the error code from phy_startup()   Vladimir Oltean
• [PATCH] board: pm926x: remove unused CONFIG_SYS_AT91_CPU_NAME   Eugen Hristev
• [PATCH] xilinx: zynqmp: Enable stack relocation to DDR   Michal Simek
• [PATCH] i2c: rcar_i2c: Enable configuring SCL rise and fall times   Adam Ford
• [PATCH 0/1] tools: env: Handle shorter read calls   Thibault Ferrante
• [PATCH 1/1] tools: env: Handle shorter read calls   Thibault Ferrante
• [PATCH V3] ARM: rmobile: beacon-renesom: Enable QSPI NOR Flash   Adam Ford
• [PATCH v2 4/9] verdin-imx8mm: switch to use binman to pack images   Simon Glass
• [PATCH 1/2] ARM: rmobile: beacon-renesom: Enable USB and ethernet ref clocks   Adam Ford
• [PATCH 2/2] ARM: rmobile: beacon-renesom: Enable Ethernet   Adam Ford
• [PATCH 2/2] ARM: rmobile: beacon-renesom: Enable Ethernet   Marek Vasut
• [PATCH 1/2] ARM: rmobile: beacon-renesom: Enable USB and ethernet ref clocks   Marek Vasut
• [PATCH V3] ARM: rmobile: beacon-renesom: Enable QSPI NOR Flash   Marek Vasut
• [PATCH 1/2] ARM: rmobile: beacon-renesom: Enable USB and ethernet ref clocks   Adam Ford
• [PATCH 1/2] ARM: rmobile: beacon-renesom: Enable USB and ethernet ref clocks   Adam Ford
• [PATCH V2 1/2] ARM: dts: rmobile: beacon-renesom: Enable USB and ethernet ref clocks   Adam Ford
• [PATCH V2 2/2] ARM: dts: rmobile: beacon-renesom: Enable Ethernet   Adam Ford
• [PATCH 0/4] imx8mm-venice: use binman to pack images   Tim Harvey
• [PATCH 1/4] arm64: dts: imx8mm-venice-gw700x: use imx8mm-venice-u-boot.dtsi   Tim Harvey
• [PATCH 2/4] arm64: dts: imx8mm-venice-gw7901: use imx8mm-venice-u-boot.dtsi   Tim Harvey
• [PATCH 3/4] arm64: dts: imx8mm-venice-gw7902: use imx8mm-venice-u-boot.dtsi   Tim Harvey
• [PATCH 4/4] imx8mm_venice: switch to use binman to pack images   Tim Harvey
• [PATCH 1/2] ARM: rmobile: beacon-renesom: Enable USB and ethernet ref clocks   Marek Vasut
• Massive stm32mp1 breakage with v2021.10-rc2   Alex G.
• [PATCH 1/4] tools: docker: Bump up QEMU version to 6.1.0   Bin Meng
• [PATCH 2/4] tools: docker: Build and install genimage   Bin Meng
• [PATCH 3/4] riscv: sifive: unleashed: Add genimage config files   Bin Meng
• [PATCH 4/4] azure/gitlab: Add tests for SiFive Unleashed board   Bin Meng
• [PATCH 1/6] imx: Introduce CONFIG_MACH_IMX   Tom Rini
• [PATCH 2/6] imx: Finish migration of IMX_CONFIG to Kconfig   Tom Rini
• [PATCH 3/6] Convert CONFIG_SPL to Kconfig   Tom Rini
• [PATCH 4/6] nitrogen6x: Migrate DDR_MB to Kconfig   Tom Rini
• [PATCH 5/6] nitrogen6x: Populate FDTFILE at build-time for all platforms   Tom Rini
• [PATCH 6/6] configs: Remove unused IMX_NAND symbol   Tom Rini
• [PATCH] Convert CONFIG_SYS_FSL_DDR4 to Kconfig   Tom Rini
• [PATCH] Convert CONFIG_QSPI_BOOT to Kconfig   Tom Rini
• [PATCH 4/6] nitrogen6x: Migrate DDR_MB to Kconfig   Troy Kisky
• [PATCH 5/6] nitrogen6x: Populate FDTFILE at build-time for all platforms   Troy Kisky
• [PATCHv2] Convert CONFIG_QSPI_BOOT to Kconfig   Tom Rini
• [PATCH 4/6] nitrogen6x: Migrate DDR_MB to Kconfig   Tom Rini
• [PATCH 0/4] crypto: Add new UCLASS_HASH   ChiaWei Wang
• [PATCH v2 0/3] fs/erofs: new filesystem   Gao Xiang
• [PATCH 2/4] tools: docker: Build and install genimage   Tom Rini
• [PATCH 1/4] tools: docker: Bump up QEMU version to 6.1.0   Tom Rini
• [PATCH v3 0/4] Support SiFive Composable cache driver   Zong Li
• [PATCH 1/2] Convert CONFIG_RAMBOOT_PBL et al to Kconfig   Tom Rini
• [PATCH 2/2] ls1046ardb_qspi*: Enable RAMBOOT_PBL   Tom Rini
• [PATCH] list: include linux/kernel.h   Mark-PK Tsai
• [PATCH 1/4] tools: docker: Bump up QEMU version to 6.1.0   Bin Meng
• [PATCH 07/13] i2c: S3C24X0: Finish Kconfig migration   Minkyu Kang
• [PATCH 15/16] README: Remove some old i2c related text   Minkyu Kang
• Usage of device-tree for blobs   Heinrich Schuchardt
• [PATCH v2 4/9] verdin-imx8mm: switch to use binman to pack images   Frieder Schrempf
• SPL SPI boot problem after commit "spi: Update speed/mode on change"   Oskari Lemmelä
• [PATCH v2 4/9] verdin-imx8mm: switch to use binman to pack images   Marcel Ziswiler
• [PATCH] ARM: at91: remove references to RM9200DK   Eugen Hristev
• [PATCH] net: remove unused CONFIG_DRIVER_AT91EMAC_*   Eugen Hristev
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Emmanuel Vadot
• [PATCH v2 0/6] Call phy_config at port probe time for the Felix DSA driver   Vladimir Oltean
• Pull request: SoCFPGA changes for efi-2021-10-rc3   Chee, Tien Fong
• Pull request for efi-2021-10-rc2-2   Simon Glass
• Pull request for efi-2021-10-rc2-2   Simon Glass
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Simon Glass
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Simon Glass
• [PATCH] board: ea: mx7ulp_com: allocate specific region of memory to OP-TEE   Oleksandr Suvorov
• [PATCH v1] driver: spi: add bcm iproc qspi support.   Bharat Kumar Reddy Gooty
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Peter Robinson
• [PATCH] board: ea: mx7ulp_com: allow setting CONFIG_BOOTCOMMAND in defconfig   Oleksandr Suvorov
• [PATCH u-boot-marvell 00/29] kwboot higher baudrate   Marek Behún
• [PATCH u-boot-marvell 01/29] tools: kwbimage: Fix printf format warning   Marek Behún
• [PATCH u-boot-marvell 02/29] tools: kwboot: Fix buffer overflow in kwboot_terminal()   Marek Behún
• [PATCH u-boot-marvell 03/29] tools: kwboot: Make the quit sequence buffer const   Marek Behún
• [PATCH u-boot-marvell 04/29] tools: kwboot: Refactor and fix writing buffer   Marek Behún
• [PATCH u-boot-marvell 05/29] tools: kwboot: Print version information header   Marek Behún
• [PATCH u-boot-marvell 06/29] tools: kwboot: Fix kwboot_xm_sendblock() function when kwboot_tty_recv() fails   Marek Behún
• [PATCH u-boot-marvell 07/29] tools: kwboot: Fix return type of kwboot_xm_makeblock() function   Marek Behún
• [PATCH u-boot-marvell 08/29] tools: kwboot: Fix comparison of integers with different size   Marek Behún
• [PATCH u-boot-marvell 09/29] tools: kwboot: Fix printing progress   Marek Behún
• [PATCH u-boot-marvell 10/29] tools: kwboot: Print newline on error when progress was not completed   Marek Behún
• [PATCH u-boot-marvell 11/29] tools: kwboot: Split sending image into header and data stages   Marek Behún
• [PATCH u-boot-marvell 12/29] tools: kwboot: Use a function to check whether received byte is a Xmodem reply   Marek Behún
• [PATCH u-boot-marvell 13/29] tools: kwboot: Allow non-xmodem text output from BootROM only in a specific case   Marek Behún
• [PATCH u-boot-marvell 14/29] tools: kwboot: Print new line after SPL output   Marek Behún
• [PATCH u-boot-marvell 15/29] tools: kwboot: Allow greater timeout when executing header code   Marek Behún
• [PATCH u-boot-marvell 16/29] tools: kwboot: Properly finish xmodem transfer   Marek Behún
• [PATCH u-boot-marvell 17/29] tools: kwboot: Always call kwboot_img_patch_hdr()   Marek Behún
• [PATCH u-boot-marvell 19/29] tools: kwboot: Don't patch image header if signed   Marek Behún
• [PATCH u-boot-marvell 20/29] tools: kwboot: Patch source address in image header   Marek Behún
• [PATCH u-boot-marvell 21/29] tools: kwboot: Patch destination address to DDR area for SPI image   Marek Behún
• [PATCH u-boot-marvell 22/29] tools: kwbimage: Refactor image_version()   Marek Behún
• [PATCH u-boot-marvell 23/29] tools: kwbimage: Refactor kwbimage header size determination   Marek Behún
• [PATCH u-boot-marvell 24/29] tools: kwboot: Round up header size to 128 B when patching   Marek Behún
• [PATCH u-boot-marvell 25/29] tools: kwboot: Support higher baudrates when booting via UART   Marek Behún
• [PATCH u-boot-marvell 26/29] tools: kwboot: Allow any baudrate on Linux   Marek Behún
• [PATCH u-boot-marvell 27/29] tools: kwboot: Add Pali and Marek as authors   Marek Behún
• [PATCH u-boot-marvell 28/29] doc/kwboot.1: Update man page   Marek Behún
• [PATCH u-boot-marvell 29/29] MAINTAINERS: Add entry for kwbimage / kwboot tools   Marek Behún
• [PATCH] board: ea: mx7ulp_com: allocate specific region of memory to OP-TEE   Tom Rini
• [PATCH] board: ea: mx7ulp_com: allow setting CONFIG_BOOTCOMMAND in defconfig   Tom Rini
• [PATCH] board: ea: mx7ulp_com: allocate specific region of memory to OP-TEE   Fabio Estevam
• [PATCH] Kconfig: Don't use RSA_FREESCALE_EXP on MX7ULP   Oleksandr Suvorov
• incompatible device trees between u-boot and linux   Michael Walle
• incompatible device trees between u-boot and linux   Tom Rini
• Pull request: SoCFPGA changes for efi-2021-10-rc3   Tom Rini
• [PATCH] Kconfig: Don't use RSA_FREESCALE_EXP on MX7ULP   Tom Rini
• incompatible device trees between u-boot and linux   Vladimir Oltean
• incompatible device trees between u-boot and linux   Tom Rini
• incompatible device trees between u-boot and linux   Michael Walle
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   AKASHI Takahiro
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Tom Rini
• incompatible device trees between u-boot and linux   Vladimir Oltean
• [PATCH v3 00/10] board: toradex: verdin-imx8mm: target refresh   Marcel Ziswiler
• [PATCH v3 01/10] imx8m: clean-up kconfig indentation   Marcel Ziswiler
• [PATCH v3 02/10] verdin-imx8mm: fix ethernet   Marcel Ziswiler
• [PATCH v3 03/10] ARM: dts: imx8mm-verdin: prepare for dek blob encapsulation   Marcel Ziswiler
• [PATCH v3 04/10] verdin-imx8mm: switch to use binman to pack images   Marcel Ziswiler
• [PATCH v3 05/10] verdin-imx8mm: enable sleep_moci output   Marcel Ziswiler
• [PATCH v3 06/10] verdin-imx8mm: clean-up include order   Marcel Ziswiler
• [PATCH v3 07/10] verdin-imx8mm: drop support for v1.0 hardware   Marcel Ziswiler
• [PATCH v3 08/10] include/configs: apalis-imx8/verdin-imx8mm: rename kernel image variable   Marcel Ziswiler
• [PATCH v3 09/10] verdin-imx8mm: use preboot for fdtfile evaluation   Marcel Ziswiler
• [PATCH v3 10/10] verdin-imx8mm: fix watchdog pinctrl issue   Marcel Ziswiler
• incompatible device trees between u-boot and linux   Tom Rini
• [PATCH] arm: dts: imx8mp: Generate single bootable binary   Teresa Remmet
• [PATCH] board: ea: mx7ulp_com: allocate specific region of memory to OP-TEE   Oleksandr Suvorov
• [PATCH] board: ea: mx7ulp_com: allocate specific region of memory to OP-TEE   Tom Rini
• incompatible device trees between u-boot and linux   Vladimir Oltean
• [PATCH v2] board: ea: mx7ulp_com: allocate specific region of memory to OP-TEE   Oleksandr Suvorov
• [PATCH] arm: dts: imx8mp: Generate single bootable binary   Fabio Estevam
• [PATCH v2] ARM: dts: Fix node status to "okay" on TI boards   Nishanth Menon
• [PATCH 1/1] riscv: enable booting HiFive Unmatched from SATA   Heinrich Schuchardt
• [PATCH 1/2] cmd: kaslrseed: add command to generate value from hwrng   Chris Morgan
• [PATCH 1/1] rockchip: px30: add support for HW RNG for Odroid Go Advance   Chris Morgan
• [PATCH 1/1] riscv: enable booting HiFive Unmatched from SATA   Bin Meng
• [PATCH u-boot-marvell 25/29] tools: kwboot: Support higher baudrates when booting via UART   Marek Behún
• [PATCH u-boot-marvell 18/29] tools: kwbimage: Simplify iteration over version 1 optional headers   Marek Behún
• [PATCH] ARM: mach-at91: fix multiple cpu_reset definition when enabling SYSRESET   Clément Léger
• incompatible device trees between u-boot and linux   Tom Rini
• [PATCH 1/1] Revert "arm64: Layerscape: Survive LPI one-way reset workaround"   Tom Rini
• incompatible device trees between u-boot and linux   Mark Kettenis
• [PATCH 1/1] riscv: enable booting HiFive Unmatched from SATA   Mark Kettenis
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Mark Kettenis
• [PATCH v5 4/7] mmc: zynq_sdhci: Add xilinx_pm_request() method to set tapdelays   Jaehoon Chung
• [PATCH v5 5/7] mmc: zynq_sdhci: Move setting tapdelay code to driver   Jaehoon Chung
• [PATCH] mmc: fsl_esdhc_imx: Fix clock disable issue   Jaehoon Chung
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Mark Kettenis
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Tom Rini
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Tom Rini
• How should we deal with actual hush odd behavior?   Tom Rini
• [PATCH v2 1/3] fs/erofs: add erofs filesystem support   Tom Rini
• [PATCH v2 2/3] fs/erofs: add lz4 1.8.3 decompressor   Tom Rini
• [PATCH v2 0/3] fs/erofs: new filesystem   Tom Rini
• incompatible device trees between u-boot and linux   Vladimir Oltean
• [PATCH 1/4] tools: docker: Bump up QEMU version to 6.1.0   Tom Rini
• [PATCH v2] ARM: Prevent the compiler from using NEON registers   Andre Przywara
• [PATCH v3 04/10] verdin-imx8mm: switch to use binman to pack images   Heiko Schocher
• [PATCH] arm: dts: imx8mp: Generate single bootable binary   Heiko Schocher
• Usage of device-tree for blobs   Simon Glass
• [PATCH 3/3] Convert CONFIG_SYS_LOAD_ADDR to Kconfig   Rick Chen
• [PATCH 3/3] Convert CONFIG_SYS_LOAD_ADDR to Kconfig   Rick Chen
• Pull request for efi-2021-10-rc2-2   Ilias Apalodimas
• [PATCH] xilinx: zynqmp: Enable gpio-key/button driver   Michal Simek
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   AKASHI Takahiro
• Usage of device-tree for blobs   Heinrich Schuchardt
• Rename of the u-boot-atmel custodian tree   Eugen.Hristev at microchip.com
• [PATCH] arm: dts: imx8mp: Delete default clocks for clock controller node   Teresa Remmet
• incompatible device trees between u-boot and linux   Michael Walle
• [PATCH] riscv: Add missing sentinel in ocores_i2c.c   Leo Liang
• [PATCH 0/3] J7200/J721E: Fix USB DFU Boot mode   Aswath Govindraju
• [PATCH 1/3] arm: dts: k3-j721e-r5-*.dts: Fix clock-names property in the usb0 instance   Aswath Govindraju
• [PATCH 2/3] environment: ti: k3_dfu: Increase the size allocated for bootloader images in dfu_alt_info_ram   Aswath Govindraju
• [PATCH 3/3] configs: j72*_evm: Define the buffer sizes for dfu   Aswath Govindraju
• [PATCH] arm: dts: imx8mp: Generate single bootable binary   Teresa Remmet
• [PATCH v<4>] arm: add initial support for the Phytium Pomelo Board   nicholas_zheng at outlook.com
• [PATCH v2] arm: dts: imx8mp: Generate single bootable binary   Teresa Remmet
• Fwd: Re: [PATCH v2 15/16] clk: Detect failure to set defaults   Harm Berntsen
• [PATCH] lx2162a : Rename emmc boot command variable   meenakshi.aggarwal at nxp.com
• [PATCH v2] board: ea: mx7ulp_com: move setting CONFIG_BOOTCOMMAND to defconfig   Oleksandr Suvorov
• [PATCH v2 5/6] arm: Use armv8_switch_to_el1 env to switch to EL1   Andre Przywara
• [PATCH 0/6] efi_loader: fix secure boot mode transitions   Heinrich Schuchardt
• [PATCH 1/6] efi_loader: stop recursion in efi_init_secure_state   Heinrich Schuchardt
• [PATCH 2/6] efi_loader: correct determination of secure boot state   Heinrich Schuchardt
• [PATCH 3/6] efi_loader: don't load signature database from file   Heinrich Schuchardt
• [PATCH 4/6] efi_loader: correct secure boot state transition   Heinrich Schuchardt
• [PATCH 5/6] efi_loader: writing AuditMode, DeployedMode   Heinrich Schuchardt
• [PATCH 6/6] efi_loader: always initialize the secure boot state   Heinrich Schuchardt
• [PATCH v2] board: ea: mx7ulp_com: move setting CONFIG_BOOTCOMMAND to defconfig   Fabio Estevam
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Peter Robinson
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Mark Kettenis
• [RFC PATCH v1 0/5] arm64: dts: imx8mm: add common -binman.dtsi and further clean-up   Marcel Ziswiler
• [RFC PATCH v1 1/5] imx8mm-cl-iot-gate: fix imximage intermediate binary naming   Marcel Ziswiler
• [RFC PATCH v1 2/5] arm64: dts: imx8mm: add common -binman.dtsi   Marcel Ziswiler
• [RFC PATCH v1 3/5] arm64: dts: imx8mm-binman.dtsi: alphabetically re-order properties   Marcel Ziswiler
• [RFC PATCH v1 4/5] arm64: dts: imx8mm-binman.dtsi: explicitly add spl filename   Marcel Ziswiler
• [RFC PATCH v1 5/5] arm64: dts: imx8mm-binman.dtsi: improve odd blob-ext naming   Marcel Ziswiler
• Rename of the u-boot-atmel custodian tree   Tom Rini
• Usage of device-tree for blobs   Mark Kettenis
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Tom Rini
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Tom Rini
• [PATCH u-boot-marvell 25/29] tools: kwboot: Support higher baudrates when booting via UART   Marek Behún
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Mark Kettenis
• [PATCH v2 0/6] efi_loader: fix secure boot mode transitions   Heinrich Schuchardt
• [PATCH v2 1/6] efi_loader: stop recursion in efi_init_secure_state   Heinrich Schuchardt
• [PATCH v2 2/6] efi_loader: correct determination of secure boot state   Heinrich Schuchardt
• [PATCH v2 3/6] efi_loader: don't load signature database from file   Heinrich Schuchardt
• [PATCH v2 4/6] efi_loader: correct secure boot state transition   Heinrich Schuchardt
• [PATCH v2 5/6] efi_loader: writing AuditMode, DeployedMode   Heinrich Schuchardt
• [PATCH v2 6/6] efi_loader: always initialize the secure boot state   Heinrich Schuchardt
• [PATCH 00/28] Initial implementation of bootmethod/bootflow   Ilias Apalodimas
• U-Boot ECDSA Software Implementation Status   Pabis, Ryan
• [RFC PATCH v1 2/5] arm64: dts: imx8mm: add common -binman.dtsi   Tim Harvey
• [RFC PATCH v1 0/5] arm64: dts: imx8mm: add common -binman.dtsi and further clean-up   Tim Harvey
• [PATCH v2 1/4] tools: docker: Bump up QEMU version to 6.1.0   Bin Meng
• [PATCH v2 2/4] tools: docker: Build and install genimage   Bin Meng
• [PATCH v2 3/4] riscv: sifive: unleashed: Add genimage config files   Bin Meng
• [PATCH v2 4/4] azure/gitlab: Add tests for SiFive Unleashed board   Bin Meng
• [PATCH] Finish converting CONFIG_SYS_CACHELINE_SIZE to Kconfig   Tom Rini
• [PATCH v2 0/3] J7200/J721E: Fix USB DFU Boot mode   Aswath Govindraju
• [PATCH v2 1/3] arm: dts: k3-j721e-r5-*.dts: Fix clock-names property in the usb0 instance   Aswath Govindraju
• [PATCH v2 2/3] environment: ti: k3_dfu: Increase the size allocated for bootloader images in dfu_alt_info_ram   Aswath Govindraju
• [PATCH v2 3/3] configs: j72*_evm: Define the buffer sizes for dfu   Aswath Govindraju
• [RFC PATCH v1 2/5] arm64: dts: imx8mm: add common -binman.dtsi   Marcel Ziswiler
• incompatible device trees between u-boot and linux   Vladimir Oltean
• imx8mm memory env in U-Boot   Tim Harvey
• U-Boot ECDSA Software Implementation Status   Alex G.
• imx8mm memory env in U-Boot   Tom Rini
• Usage of device-tree for blobs   Simon Glass
• Usage of device-tree for blobs   Simon Glass
• Usage of device-tree for blobs   Mark Kettenis
• Usage of device-tree for blobs   Mark Kettenis
• Usage of device-tree for blobs   Sean Anderson
• [PATCH 00/10] stm32mp1: Support falcon mode with OP-TEE payloads   Alexandru Gagniuc
• [PATCH 01/10] stm32mp1: Add support for baudrates higher than 115200   Alexandru Gagniuc
• [PATCH 02/10] stm32mp1: Add support for falcon mode boot from SD card   Alexandru Gagniuc
• [PATCH 03/10] board: stm32mp1: Implement board_fit_config_name_match() for SPL   Alexandru Gagniuc
• [PATCH 04/10] fdt_support: Implement fdt_ethernet_set_macaddr()   Alexandru Gagniuc
• [PATCH 05/10] arm: stm32mp: bsec: Do not skip .probe() for SPL   Alexandru Gagniuc
• [PATCH 06/10] arm: stm32mp: Factor out reading MAC address from OTP   Alexandru Gagniuc
• [PATCH 07/10] stm32mp1: spl: Configure MAC address when booting OP-TEE   Alexandru Gagniuc
• [PATCH 08/10] lib: Makefile: Make optee library available in SPL   Alexandru Gagniuc
• [PATCH 09/10] ARM: dts: stm32mp: Add OP-TEE "/firmware" node to SPL dtb   Alexandru Gagniuc
• [PATCH 10/10] stm32mp1: spl: Copy optee nodes to target FDT for OP-TEE payloads   Alexandru Gagniuc
• [RFC PATCH] stm32mp1: Replace STM32IMAGE config with TFABOOT_FIP   Alexandru Gagniuc
• [PATCH] mkimage: Don't disable encryption based on CONFIG_FIT_CIPHER   Alexandru Gagniuc
• [PATCH 04/10] fdt_support: Implement fdt_ethernet_set_macaddr()   Sean Anderson
• [PATCH 04/10] fdt_support: Implement fdt_ethernet_set_macaddr()   Alex G.
• [PATCH] Finish converting CONFIG_SYS_CACHELINE_SIZE to Kconfig   Sean Anderson
• [PATCH u-boot-marvell 00/29] kwboot higher baudrate   Chris Packham
• [PATCH u-boot-marvell 00/29] kwboot higher baudrate   Chris Packham
• [PATCH u-boot-marvell 28/29] doc/kwboot.1: Update man page   Chris Packham
• [PATCH u-boot-marvell 00/29] kwboot higher baudrate   Marek Behún
• [PATCH v2 1/6] efi_loader: stop recursion in efi_init_secure_state   AKASHI Takahiro
• [PATCH u-boot-marvell 00/29] kwboot higher baudrate   Chris Packham
• [PATCH v<4>] arm: add initial support for the Phytium Pomelo Board   Tom Rini
• [PATCH v2 1/4] tools: docker: Bump up QEMU version to 6.1.0   Tom Rini
• [PATCH v2 2/4] tools: docker: Build and install genimage   Tom Rini
• [PATCH v2 4/4] azure/gitlab: Add tests for SiFive Unleashed board   Tom Rini
• [PATCH v2] board: ea: mx7ulp_com: move setting CONFIG_BOOTCOMMAND to defconfig   Tom Rini
• [PATCH v2 5/6] efi_loader: writing AuditMode, DeployedMode   AKASHI Takahiro
• [PATCH v2 6/6] efi_loader: always initialize the secure boot state   AKASHI Takahiro
• Usage of device-tree for blobs   Simon Glass
• Usage of device-tree for blobs   Simon Glass
• [PATCH v2 0/6] efi_loader: fix secure boot mode transitions   AKASHI Takahiro
• [PATCH 0/3] common: Add fdt network helper   Tony Dinh
• [PATCH v2 5/6] efi_loader: writing AuditMode, DeployedMode   Heinrich Schuchardt
• [PATCH v2 3/6] efi_loader: don't load signature database from file   AKASHI Takahiro
• [PATCH v2 6/6] efi_loader: always initialize the secure boot state   Heinrich Schuchardt
• [PATCH v2 3/6] efi_loader: don't load signature database from file   Heinrich Schuchardt
• [PATCH v2 6/6] efi_loader: always initialize the secure boot state   AKASHI Takahiro
• [PATCH v2 3/6] efi_loader: don't load signature database from file   AKASHI Takahiro
• [PATCH v2 3/6] efi_loader: don't load signature database from file   AKASHI Takahiro
• [PATCH v2 6/6] efi_loader: always initialize the secure boot state   Heinrich Schuchardt
• [PATCH v2 3/6] efi_loader: don't load signature database from file   Heinrich Schuchardt
• [PATCH v4 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Stefan Roese
• [PATCH] Kconfig: Remove all default n/no options   Michal Simek
• efi_loader: Omit memory with "no-map" when returning memory   Kristian Amlie
• [PATCH] efi_loader: Omit memory with "no-map" when returning memory map.   Kristian Amlie
• [PATCH 00/10] xilinx: Add support for DTB reselection   Michal Simek
• [PATCH] xilinx: zynqmp: Update descriptions for u-boot.its   Michal Simek
• [PATCH] xilinx: zynqmp: Enable stack relocation to DDR   Michal Simek
• [PATCH u-boot-marvell 28/29] doc/kwboot.1: Update man page   Pavol Rohár
• [PATCH u-boot-marvell 00/29] kwboot higher baudrate   Pali Rohár
• [PATCH u-boot-marvell 28/29] doc/kwboot.1: Update man page   Pali Rohár
• [PATCH 0/7] xyz-modem: Fix cancelling and closing transfers   Pali Rohár
• [PATCH] loadb: Properly indicate aborted kermit transfer   Pali Rohár
• [PATCH] zynqmp: restore the jtag interface   Jorge Ramirez-Ortiz, Foundries
• [PATCH] arm64: zynqmp: Print the secure boot status information in EL3   Jorge Ramirez-Ortiz, Foundries
• [RFC PATCH v1 2/5] arm64: dts: imx8mm: add common -binman.dtsi   Teresa Remmet
• [PATCH v2 5/6] efi_loader: writing AuditMode, DeployedMode   Ilias Apalodimas
• [PATCH] zynqmp: restore the jtag interface   Michal Simek
• [PATCH] doc: Remove information about CAPSULE_FMP_HEADER   Michal Simek
• [PATCH 1/2] include: dt-bindings: mfd: add atmel flexcom include file   Eugen Hristev
• [PATCH 2/2] ARM: dts: at91: update flexcom defines using include file   Eugen Hristev
• [PATCH] ARM: zynq: Enable capsule update for qspi and mmc   Michal Simek
• [RFC PATCH v1 2/5] arm64: dts: imx8mm: add common -binman.dtsi   Marcel Ziswiler
• [PATCH u-boot-marvell 00/29] kwboot higher baudrate   Chris Packham
• [GIT PULL] xilinx patches for v2021.10-rc3   Michal Simek
• [PATCH v2 0/2] Refactor and improve full help output from tools   Paul Barker
• [PATCH 0/2] Fix qspi read and write issues   Michal Simek
• [PATCH] pwm: Add driver for cadence TTC   Michal Simek
• [PATCH 1/2] arm: a37xx: pci: Disable returning CRS response   Pali Rohár
• [PATCH 2/2] arm: a37xx: pci: Implement re-issuing config requests on CRS response   Pali Rohár
• boot hangs on new board with SAMA5D27C-D5M   Alexander Dahl
• [PATCH v4 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Tom Rini
• [PATCH u-boot-marvell 00/29] kwboot higher baudrate   Marek Behún
• [PATCH u-boot-marvell 28/29] doc/kwboot.1: Update man page   Marek Behún
• [PATCH u-boot-marvell 28/29] doc/kwboot.1: Update man page   Pali Rohár
• [RFC PATCH v1 2/5] arm64: dts: imx8mm: add common -binman.dtsi   Tim Harvey
• Broken CONFIG_SPL_SATA_SUPPORT=y   Pali Rohár
• Broken CONFIG_SPL_SATA_SUPPORT=y   Tom Rini
• [GIT PULL] xilinx patches for v2021.10-rc3   Tom Rini
• [PATCH 1/2] firmware: ti_sci: Include linux/err.h in ti_sci_protocol.h   Nishanth Menon
• [PATCH 1/2] armv8/cache.S: Read sysreg fields through ubfx   Pierre-Clément Tosi
• [PATCH 2/2] armv8/cache.S: Triple with single instruction   Pierre-Clément Tosi
• [PATCH 2/2] arm: mach-k3: common: Add a release_resources_for_core_shutdown() stub   Nishanth Menon
• [PATCH] pwm: Add driver for cadence TTC   Sean Anderson
• Usage of device-tree for blobs   Mark Kettenis
• [PATCH 1/2] arm: mach-rmobile: Move cpu_reset to rzg2-reset.c   Adam Ford
• [PATCH 2/2] arm: rmobile: Remove duplicate code from beacon-rzg2m and hihope-rzg2   Adam Ford
• imx8mm memory env in U-Boot   Tim Harvey
• [PATCH u-boot-marvell 00/29] kwboot higher baudrate   Chris Packham
• [PATCH] Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig   Tom Rini
• [PATCH] doc: Add documentation about devicetree usage   Simon Glass
• Usage of device-tree for blobs   Simon Glass
• [PATCH] doc: Add documentation about devicetree usage   Simon Glass
• [PATCH] doc: Add documentation about devicetree usage   Sean Anderson
• [PATCH v4 1/2] mmc: Add support for enumerating MMC card in a given mode using mmc command   Jaehoon Chung
• [PATCH 1/2] mmc: fix switch issue with send_status disabled   Jaehoon Chung
• [PATCH 2/2] mmc: fix device_remove when HS400_ES is enabled   Jaehoon Chung
• [PATCH 1/2] drivers: mmc: Add wait_dat0 support for Freescale eSDHC driver   Jaehoon Chung
• [PATCH 2/2] drivers: mmc: Add wait_dat0 support for sdhci driver   Jaehoon Chung
• [PATCH 07/13] i2c: S3C24X0: Finish Kconfig migration   Jaehoon Chung
• [PATCH 10/11] sandbox: mmc: Support a backing file   Jaehoon Chung
• [PATCH] doc: Add documentation about devicetree usage   Mark Kettenis
• [PATCH 10/11] sandbox: mmc: Support a backing file   Sean Anderson
• [PATCH] Kconfig: Don't use RSA_FREESCALE_EXP on MX7ULP   Oleksandr Suvorov
• [PATCH v2] Kconfig: Don't use RSA_FREESCALE_EXP on MX7ULP   Oleksandr Suvorov
• [PATCH 0/2] sandbox: provide /chosen/boot-hartid property   Heinrich Schuchardt
• [PATCH 1/2] sandbox: correct cpu nodes   Heinrich Schuchardt
• [PATCH 2/2] sandbox: provide /chosen/boot-hartid property   Heinrich Schuchardt
• [PATCH] serial: qcom: add support for GENI serial driver.   Дмитрий Санковский
• [PATCH 1/1] lib/rsa: don't use NULL as key_id   Heinrich Schuchardt
• [PATCH v2 0/2] Add support of the FXL6408 GPIO expander   Oleksandr Suvorov
• [PATCH v2 1/2] GPIO: fxl6408: Add support for FXL6408 GPIO expander   Oleksandr Suvorov
• [PATCH v2 2/2] colibri-imx8x: add on-module gpio expander fxl6408   Oleksandr Suvorov
• sandbox TPM   Heinrich Schuchardt
• [PATCH] doc: Add documentation about devicetree usage   Heinrich Schuchardt
• [RFC PATCH v1 2/5] arm64: dts: imx8mm: add common -binman.dtsi   Marcel Ziswiler
• [PATCH] doc: Add documentation about devicetree usage   Tom Rini
• [PATCH] doc: Add documentation about devicetree usage   Bin Meng
• [PATCH] doc: Add documentation about devicetree usage   Heinrich Schuchardt
• spmi: msm: add arbiter version 5 support   Дмитрий Санковский
• [PATCH v1 1/2] net: brcm: netXtreme driver   Ramon Fried
• [PATCH] net: remove unused CONFIG_DRIVER_AT91EMAC_*   Ramon Fried
• [PATCH] doc: Add documentation about devicetree usage   Tom Rini
• [PATCH] doc: Add documentation about devicetree usage   Simon Glass
• [PATCH] doc: Add documentation about devicetree usage   Simon Glass
• [PATCH] doc: Add documentation about devicetree usage   Simon Glass
• [PATCH v2 0/3] doc: Clarify how U-Boot makes use of devicetree   Simon Glass
• [PATCH v2 1/3] doc: Tidy up the bindings for the config/ node   Simon Glass
• [PATCH v2 2/3] doc: Complete the list of available runtime-config options   Simon Glass
• [PATCH v2 3/3] RFC: doc: Add documentation about devicetree usage   Simon Glass
• Usage of device-tree for blobs   Simon Glass
• imx8mm memory env in U-Boot   Tom Rini
• [PATCH] RFC: Support an EFI-loader bootflow   Simon Glass
• sandbox TPM   Simon Glass
• incompatible device trees between u-boot and linux   Michael Walle
• [PATCH] doc: Add documentation about devicetree usage   Bin Meng
• [PATCH] Convert CONFIG_SYS_MALLOC_LEN to Kconfig   Tom Rini
• [PATCH] doc: Add documentation about devicetree usage   Simon Glass
• [PATCH] doc: Add documentation about devicetree usage   Mark Kettenis
• sandbox TPM   Peter Robinson
• [PATCH] efi_loader: sections with zero VirtualSize   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: rounding of image size   Heinrich Schuchardt
• [PATCH] doc: Add documentation about devicetree usage   Simon Glass
• [PATCH] doc: Add documentation about devicetree usage   Bin Meng
• [PATCH] doc: Add documentation about devicetree usage   Tom Rini
• [PATCH] doc: Add documentation about devicetree usage   Tom Rini
• [PATCH] doc: Add documentation about devicetree usage   Tom Rini
• [PATCH] doc: Add documentation about devicetree usage   Bin Meng
• [PATCH 1/2] arm: mach-rmobile: Move cpu_reset to rzg2-reset.c   Marek Vasut
• [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Marek Vasut
• [PATCH 13/14] lmb: Mark arch_lmb_reserve() as weak symbol   Marek Vasut
• [PATCH] Convert CONFIG_SYS_MALLOC_LEN to Kconfig   Sean Anderson
• [PATCH 13/14] lmb: Mark arch_lmb_reserve() as weak symbol   Tom Rini
• [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Tom Rini
• [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Marek Vasut
• [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Tom Rini
• [PATCH 1/3] imx8mm_evk: Increase CONFIG_SYS_BOOTM_LEN to 64MB   Oleksandr Suvorov
• [PATCH 2/3] imx8mq_evk: Increase CONFIG_SYS_BOOTM_LEN to 64MB   Oleksandr Suvorov
• [PATCH 3/3] imx8qm_mek: Increase CONFIG_SYS_BOOTM_LEN to 64MB   Oleksandr Suvorov
• [PATCH 3/3] imx8qm_mek: Increase CONFIG_SYS_BOOTM_LEN to 64MB   Marek Vasut
• [PATCH] Convert CONFIG_SYS_MALLOC_LEN to Kconfig   Tom Rini
• [PATCH 3/3] imx8qm_mek: Increase CONFIG_SYS_BOOTM_LEN to 64MB   Tom Rini
• [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Marek Vasut
• [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Tom Rini
• [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Marek Vasut
• [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Tom Rini
• [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Marek Vasut
• [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Tom Rini
• [PATCH] efi_loader: sections with zero VirtualSize   Asherah Connor
• [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Marek Vasut
• [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Tom Rini
• incompatible device trees between u-boot and linux   Vladimir Oltean
• [PATCH] Finish converting CONFIG_SYS_CACHELINE_SIZE to Kconfig   Rick Chen
• [PATCH v4 1/2] mmc: Add support for enumerating MMC card in a given mode using mmc command   Aswath Govindraju
• [PATCH] list: include linux/kernel.h   Mark-PK Tsai
• sandbox TPM   Ilias Apalodimas
• [PATCHv2] configs: Layerscape: Remove the 'fdt_addr' env   Zhiqiang Hou
• sandbox TPM   Heinrich Schuchardt
• [PATCH] ARM: meson: Add S905Y2 SOC ID   Neil Armstrong
• [PATCH] ARM: meson: Add S905Y2 SOC ID   Neil Armstrong
• [PATCH] pwm: Add driver for cadence TTC   Michal Simek
• [PATCH v2] pwm: Add driver for cadence TTC   Michal Simek
• [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Marek Vasut
• [PATCH 3/3] imx8qm_mek: Increase CONFIG_SYS_BOOTM_LEN to 64MB   Oleksandr Suvorov
• Do not stop bootloader loading using any key   Fariya F
• [PATCH v2 2/4] mtd: spi-nor-core: Adding different type of command extension in Soft Reset   Pratyush Yadav
• incompatible device trees between u-boot and linux   François Ozog
• [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Tom Rini
• [PATCH 3/3] imx8qm_mek: Increase CONFIG_SYS_BOOTM_LEN to 64MB   Marek Vasut
• [PATCH v2 3/3] RFC: doc: Add documentation about devicetree usage   Ilias Apalodimas
• [PATCH] board/imx6sabresd: add the option of imx6solo during FIT matching   jiladahe1997 at gmail.com
• [PATCH] crc32: Add crc32 implementation using __builtin_aarch64_crc32b   Marek Vasut
• [PATCH 1/5] Convert CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig   Tom Rini
• [PATCH 2/5] imx: Convert SERIAL_TAG support to ENV_VARS_UBOOT_RUNTIME_CONFIG   Tom Rini
• [PATCH 3/5] arm: Disable ATAGs support   Tom Rini
• [PATCH 4/5] arm: Add Kconfig entry for MACH_TYPE   Tom Rini
• [PATCH 5/5] arm: Finish migration of CONFIG_MACH_TYPE   Tom Rini
• [PATCH V2 1/2] ARM: dts: rmobile: beacon-renesom: Enable USB and ethernet ref clocks   Adam Ford
• [PATCH v2 1/3] fs/erofs: add erofs filesystem support   Huang Jianan
• [PATCH v2 2/3] fs/erofs: add lz4 1.8.3 decompressor   Huang Jianan
• [PATCH] mx7ulp: add getting a board serial number   Oleksandr Suvorov
• [PATCH 3/5] common/spl: Drop SPL_HASH_SUPPORT in favor of SPL_HASH   Tom Rini
• [PATCH] mx7ulp: add getting a board serial number   Tom Rini
• [PATCH] list: include linux/kernel.h   Tom Rini
• [PATCH] board/imx6sabresd: add the option of imx6solo during FIT matching   Fabio Estevam
• [PATCH v2 3/3] RFC: doc: Add documentation about devicetree usage   Heinrich Schuchardt
• [PATCH v2 1/3] doc: Tidy up the bindings for the config/ node   Marcel Ziswiler
• [PATCH v2 3/3] RFC: doc: Add documentation about devicetree usage   Tom Rini
• [PATCH v2 2/3] doc: Complete the list of available runtime-config options   Marcel Ziswiler
• [PATCH v2 3/3] RFC: doc: Add documentation about devicetree usage   Marcel Ziswiler
• [PATCH 3/3] imx8qm_mek: Increase CONFIG_SYS_BOOTM_LEN to 64MB   Marcel Ziswiler
• [PATCH 3/3] imx8qm_mek: Increase CONFIG_SYS_BOOTM_LEN to 64MB   Marek Vasut
• [PATCH v2 3/3] RFC: doc: Add documentation about devicetree usage   Heinrich Schuchardt
• [PATCH v2 1/3] fs/erofs: add erofs filesystem support   Huang Jianan
• [PATCH 1/5] ARM: rmobile: Enable board detection when FIT is enabled   Adam Ford
• [PATCH 2/5] ARM: rmobile: beacon: Support RZ/G2 [M/N/H] on TARGET_BEACON_RZG2M   Adam Ford
• [PATCH 3/5] ARM: rmobile: beacon: Remove duplicated for RZ/G2 M/N/H   Adam Ford
• [PATCH 4/5] ARM: rmobile: Beacon: Remove dead code   Adam Ford
• [PATCH 5/5] ARM: rmobile: beacon: Enable reference clocks for USB and AVB   Adam Ford
• [PATCH 4/5] image: Drop if/elseif hash selection in calculate_hash()   Tom Rini
• [PATCH 3/5] common/spl: Drop SPL_HASH_SUPPORT in favor of SPL_HASH   Tom Rini
• [PATCH v2] pwm: Add driver for cadence TTC   Sean Anderson
• [PATCH v2 1/3] fs/erofs: add erofs filesystem support   Tom Rini
• [PATCH v2 3/3] RFC: doc: Add documentation about devicetree usage   Tom Rini
• [PATCH 3/5] common/spl: Drop SPL_HASH_SUPPORT in favor of SPL_HASH   Tom Rini
• [PATCH v2 1/3] fs/erofs: add erofs filesystem support   Gao Xiang
• [PATCH 3/3] imx8qm_mek: Increase CONFIG_SYS_BOOTM_LEN to 64MB   Marcel Ziswiler
• [ANN] U-Boot v2021.10-rc3 released   Tom Rini
• [PATCH 3/3] imx8qm_mek: Increase CONFIG_SYS_BOOTM_LEN to 64MB   Marek Vasut
• [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]   Tom Rini
• [PATCH 3/3] imx8qm_mek: Increase CONFIG_SYS_BOOTM_LEN to 64MB   Tom Rini
• [PATCH 1/2] arm: mach-rmobile: Move cpu_reset to rzg2-reset.c   Adam Ford
• [PATCH 1/2] arm: mach-rmobile: Move cpu_reset to rzg2-reset.c   Marek Vasut
• [PATCH 3/3] imx8qm_mek: Increase CONFIG_SYS_BOOTM_LEN to 64MB   Marcel Ziswiler
• [PATCH V3] ARM: rmobile: beacon-renesom: Enable QSPI NOR Flash   Adam Ford
• [PATCH] usb: dwc2: Rename CONFIG_DWC2 namespace to DWC2   Tom Rini
• [PATCH 1/3] aristainetos2: Rename CONFIG_EXTRA_ENV_BOARD_SETTINGS   Tom Rini
• [PATCH 2/3] arm: keystone2: Rename CONFIG_ENV_KS2_BOARD_SETTINGS   Tom Rini
• [PATCH 3/3] exynos: Update environment macros a bit   Tom Rini
• [PATCH] powerpc: Remove unused FCC ethernet code   Tom Rini
• [PATCH 01/13] kp_imx53: Switch to using a local namespace for ID EEPROM   Tom Rini
• [PATCH 01/16] Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACY   Tom Rini
• [PATCH] nand: vf610_nfc: Do not abuse CONFIG namespace   Tom Rini
• [PATCH] arm: Migrate GICV2 / GICV3 to Kconfig   Tom Rini
• [PATCH] ppc: Rework some hard-coded BOOTCOMMANDS   Tom Rini
• [PATCH] i8042: Do not abuse CONFIG namespace   Tom Rini
• [PATCH] global: Remove dead code that starts with CONFIG_[0-9A]   Tom Rini
• [PATCH] video: Remove ati_radeon_fb   Tom Rini
• [PATCH] spi: altera_spi: Do not abuse CONFIG namespace   Tom Rini
• [PATCH] mpc83xx: Update comment   Tom Rini
• [PATCH] astro_mcf5373l: Rework ASTRO_ID logic   Tom Rini
• [PATCH] Kconfig: Use spaces not tabs in Kconfig entires   Tom Rini
• [PATCH] watchdog: Fix watchdog enablement in SPL and TPL   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH V3] ARM: rmobile: beacon-renesom: Enable QSPI NOR Flash   Marek Vasut
• am335x_spl_bch - SPL NAND loading hang on power on only   Kevin Baker
• [PATCH] board/imx6sabresd: add the option of imx6solo during FIT matching   Mingrui Ren
• [PATCH] Finish converting CONFIG_SYS_CACHELINE_SIZE to Kconfig   Daniel Schwierzeck
• [PATCH] board/imx6sabresd: add the option of imx6solo during FIT matching   Fabio Estevam
• [PATCH] Convert CONFIG_SYS_MALLOC_LEN to Kconfig   Rick Chen
• [PATCH] Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig   Daniel Schwierzeck
• [PATCH v3 0/5] efi_loader: capsule: improve capsule authentication support   AKASHI Takahiro
• [PATCH v3 1/5] tools: mkeficapsule: add firmwware image signing   AKASHI Takahiro
• [PATCH v3 2/5] tools: mkeficapsule: add man page   AKASHI Takahiro
• [PATCH v3 3/5] doc: update UEFI document for usage of mkeficapsule   AKASHI Takahiro
• [PATCH v3 4/5] tools: mkeficapsule: allow for specifying GUID explicitly   AKASHI Takahiro
• [PATCH v3 5/5] test/py: efi_capsule: align with the syntax change of mkeficapsule   AKASHI Takahiro
• [PATCH] Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig   Tom Rini
• [PATCH] Finish converting CONFIG_SYS_CACHELINE_SIZE to Kconfig   Tom Rini
• [PATCH] Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig   Daniel Schwierzeck
• [PATCH v3 2/4] riscv: lib: introduce a cache_init interface   Sean Anderson
• [PATCH v3 3/4] board: sifive: use ccache driver instead of helper function   Sean Anderson
• [PATCH 3/9] mvebu: Migrate CONFIG_DDR_32BIT/64BIT to Kconfig   Stefan Roese
• [PATCH 4/9] mvebu: ddr: Rename CONFIG_DDR_FIXED_SIZE to CONFIG_SYS_SDRAM_SIZE   Stefan Roese
• [PATCH] tools: kwbimage: Remove comment about unimplemented register headers in v1 images   Stefan Roese
• [PATCH v3 1/5] tools: mkeficapsule: add firmwware image signing   Heinrich Schuchardt
• [PATCH 1/2] arm: a37xx: pci: Disable returning CRS response   Stefan Roese
• [PATCH 2/2] arm: a37xx: pci: Implement re-issuing config requests on CRS response   Stefan Roese
• [PATCH v3 2/5] tools: mkeficapsule: add man page   Heinrich Schuchardt
• [PATCH v3 3/5] doc: update UEFI document for usage of mkeficapsule   Heinrich Schuchardt
• [PATCH v3 4/5] tools: mkeficapsule: allow for specifying GUID explicitly   Heinrich Schuchardt
• [PATCH v3 5/5] test/py: efi_capsule: align with the syntax change of mkeficapsule   Heinrich Schuchardt
• [PATCH v3 0/5] efi_loader: capsule: improve capsule authentication support   Heinrich Schuchardt
• [PATCH] RFC: Support an EFI-loader bootflow   AKASHI Takahiro
• [PATCH] efi_loader: Omit memory with "no-map" when returning memory map.   Heinrich Schuchardt
• [PATCH] watchdog: Fix watchdog enablement in SPL and TPL   Marcel Ziswiler
• [PATCH v2 2/4] mtd: spi-nor-core: Adding different type of command extension in Soft Reset   liao jaime
• [PATCH v6 12/12] sandbox: add test of wdt-uclass' watchdog_reset()   Stefan Roese
• Subject: [PATCH 0/6] Add support for SDM845 based boards, and SM-G9600   Дмитрий Санковский
• Subject: [PATCH 1/6 v2] serial: qcom: add support for GENI serial driver   Дмитрий Санковский
• Subject: [PATCH 2/6 v2] spmi: msm: add arbiter version 5 support   Дмитрий Санковский
• Subject: [PATCH 3/6] pinctrl: qcom: add pinctrl and gpio drivers for SDM845   Дмитрий Санковский
• Subject: [PATCH 4/6] clocks: qcom: add clocks for SDM845 debug uart   Дмитрий Санковский
• Subject: [PATCH 5/6] SoC: qcom: add support for SDM845   Дмитрий Санковский
• Subject: [PATCH 6/6] board: samsung: add Samsung Galaxy S9/S9+(SM-G96x0) board   Дмитрий Санковский
• [PATCH] watchdog: Fix watchdog enablement in SPL and TPL   Marek Vasut
• [PATCH v4 0/4] Support SiFive Composable cache driver   Zong Li
• [PATCH v4 1/4] cache: add sifive composable cache driver   Zong Li
• [PATCH v4 2/4] riscv: lib: implement enable_caches for sifive cache   Zong Li
• [PATCH v4 3/4] board: sifive: use ccache driver instead of helper function   Zong Li
• [PATCH v4 4/4] riscv: lib: modify the indent   Zong Li
• [PATCH v3 2/4] riscv: lib: introduce a cache_init interface   Zong Li
• [PATCH v6 12/12] sandbox: add test of wdt-uclass' watchdog_reset()   Rasmus Villemoes
• How should we deal with actual hush odd behavior?   Francis Laniel
• [PATCH] mx7ulp: add getting a board serial number   Oleksandr Suvorov
• [PATCH v1 0/2] board: toradex: enable dynamic DDR calibration for iMX6 boards   Francesco Dolcini
• [PATCH v1 1/2] colibri-imx6: use dynamic DDR calibration   Francesco Dolcini
• [PATCH v1 2/2] apalis-imx6: use dynamic DDR calibration   Francesco Dolcini
• [PATCH] image: add lz4 zstd compression magic map   Artem Lapkin
• Fwd: Re: [PATCH] efi_loader: Omit memory with "no-map" when returning memory map.   Heinrich Schuchardt
• Fwd: Re: [PATCH] efi_loader: Omit memory with "no-map" when returning memory map.   Kristian Amlie
• [PATCH v2] mx7ulp: add getting a board serial number   Oleksandr Suvorov
• [PATCH] lib: fix typos in Kconfig   Oleksandr Suvorov
• [PATCH 4/9] mvebu: ddr: Rename CONFIG_DDR_FIXED_SIZE to CONFIG_SYS_SDRAM_SIZE   Tom Rini
• [PATCH v6 12/12] sandbox: add test of wdt-uclass' watchdog_reset()   Tom Rini
• [PATCH v2] mx7ulp: add getting a board serial number   Fabio Estevam
• [PATCH] x86: Change SYS_LOAD_ADDR to 0x01000000   Tom Rini
• incompatible device trees between u-boot and linux   Rob Herring
• [PATCH] lib: fix typos in Kconfig   Bin Meng
• [PATCH] x86: Change SYS_LOAD_ADDR to 0x01000000   Bin Meng
• incompatible device trees between u-boot and linux   Sean Anderson
• [RFC PATCH] stm32mp1: Replace STM32IMAGE config with TFABOOT_FIP   Patrick DELAUNAY
• [PATCH v6 12/12] sandbox: add test of wdt-uclass' watchdog_reset()   Stefan Roese
• Please pull u-boot-marvell/next (watchdog related)   Stefan Roese
• [PATCH] x86: Change SYS_LOAD_ADDR to 0x01000000   Tom Rini
• nand/am335x_spl_bch - SPL NAND loading hang on power on only   Kevin Baker
• [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]   Oleh Kravchenko
• [PATCH 0/9] arm: dts: ls1028a: sync device tree with linux   Michael Walle
• [PATCH 1/9] armv8: ls1028a: add IOMMU stream ID to vivante node   Michael Walle
• [PATCH 2/9] arm: dts: ls1028a: move devices into /soc   Michael Walle
• [PATCH 3/9] arm: dts: ls1028a: remove /memory node   Michael Walle
• [PATCH 4/9] arm: dts: ls1028a: update the labels   Michael Walle
• [PATCH 5/9] watchdog: sp805_wdt: use correct compatible string   Michael Walle
• [PATCH 6/9] spi: fsl_dspi: add new compatible fsl,ls1021a-v1.0-dspi   Michael Walle
• [PATCH 7/9] serial: lpuart: add new compatible fsl,ls1028a-lpuart   Michael Walle
• [PATCH 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux   Michael Walle
• [PATCH 9/9] arm: dts: sl28: sync dtbs   Michael Walle
• [PATCH 01/10] stm32mp1: Add support for baudrates higher than 115200   Patrick DELAUNAY
• [PATCH 02/10] stm32mp1: Add support for falcon mode boot from SD card   Patrick DELAUNAY
• [PATCH 03/10] board: stm32mp1: Implement board_fit_config_name_match() for SPL   Patrick DELAUNAY
• [RFC PATCH] stm32mp1: Replace STM32IMAGE config with TFABOOT_FIP   Marek Vasut
• [PATCH 1/2] mmc: fsl_esdhc_imx: initialize data for imx7ulp   Oleksandr Suvorov
• [PATCH 2/2] mmc: sdhci-esdhc-imx: Add HS400 support for iMX7ULP   Oleksandr Suvorov
• [PATCH 05/10] arm: stm32mp: bsec: Do not skip .probe() for SPL   Patrick DELAUNAY
• Fwd: Re: [PATCH] efi_loader: Omit memory with "no-map" when returning memory map.   Heinrich Schuchardt
• [PATCH] lib: fix typos in Kconfig   Heinrich Schuchardt
• [PATCH 07/10] stm32mp1: spl: Configure MAC address when booting OP-TEE   Patrick DELAUNAY
• [PATCH 08/10] lib: Makefile: Make optee library available in SPL   Patrick DELAUNAY
• [PATCH 10/10] stm32mp1: spl: Copy optee nodes to target FDT for OP-TEE payloads   Patrick DELAUNAY
• [PATCH 09/10] ARM: dts: stm32mp: Add OP-TEE "/firmware" node to SPL dtb   Patrick DELAUNAY
• [PATCH 2/2] mmc: sdhci-esdhc-imx: Add HS400 support for iMX7ULP   Fabio Estevam
• [PATCH 1/2] mmc: fsl_esdhc_imx: initialize data for imx7ulp   Fabio Estevam
• [PATCH 2/2] mmc: sdhci-esdhc-imx: Add HS400 support for iMX7ULP   Oleksandr Suvorov
• [PATCH v2 1/2] mmc: fsl_esdhc_imx: initialize data for imx7ulp   Oleksandr Suvorov
• [PATCH v2 2/2] mmc: sdhci-esdhc-imx: Add HS400 support for iMX7ULP   Oleksandr Suvorov
• [PATCH 4/9] arm: dts: ls1028a: update the labels   Vladimir Oltean
• [PATCH 2/2] drivers: mmc: Add wait_dat0 support for sdhci driver   Stephen Carlson
• [PATCH] dt-bindings: pinctrl: k3: Synchronize with v5.14 kernel   Nishanth Menon
• [PATCH 0/2] arm: mach-k3: Fix corruption of device manager firmware   Nishanth Menon
• [PATCH 1/2] arm: mach-k3: common: Make sure firmware sections are loaded prior to armv8 startup   Nishanth Menon
• [PATCH 2/2] tools: k3_fit_atf: Change DM load address to avoid conflict   Nishanth Menon
• [PATCH 0/9] arm: dts: ls1028a: sync device tree with linux   Vladimir Oltean
• [PATCH 7/9] serial: lpuart: add new compatible fsl, ls1028a-lpuart   Vladimir Oltean
• [PATCH 6/9] spi: fsl_dspi: add new compatible fsl,ls1021a-v1.0-dspi   Vladimir Oltean
• incompatible device trees between u-boot and linux   Rob Herring
• [PATCH 3/9] arm: dts: ls1028a: remove /memory node   Vladimir Oltean
• [PATCH 2/9] arm: dts: ls1028a: move devices into /soc   Vladimir Oltean
• [PATCH 0/9] arm: dts: ls1028a: sync device tree with linux   Vladimir Oltean
• [PATCH 07/10] stm32mp1: spl: Configure MAC address when booting OP-TEE   Alex G.
• [PATCH 2/2] tools: k3_fit_atf: Change DM load address to avoid conflict   Nishanth Menon
• [PATCH 0/9] arm: dts: ls1028a: sync device tree with linux   Michael Walle
• [PATCH 2/9] arm: dts: ls1028a: move devices into /soc   Michael Walle
• [PATCH 6/9] spi: fsl_dspi: add new compatible fsl,ls1021a-v1.0-dspi   Michael Walle
• [PATCH 7/9] serial: lpuart: add new compatible fsl, ls1028a-lpuart   Michael Walle
• [PATCH 0/9] arm: dts: ls1028a: sync device tree with linux   Michael Walle
• [PATCH 6/9] spi: fsl_dspi: add new compatible fsl,ls1021a-v1.0-dspi   Vladimir Oltean
• [PATCH 6/9] spi: fsl_dspi: add new compatible fsl,ls1021a-v1.0-dspi   Michael Walle
• [PATCH 2/9] arm: dts: ls1028a: move devices into /soc   Vladimir Oltean
• [PATCH 6/9] spi: fsl_dspi: add new compatible fsl,ls1021a-v1.0-dspi   Vladimir Oltean