[PATCH 1/3] arm: dts: sync the Rockhip 3399 SoCs from Linux

Kever Yang kever.yang at rock-chips.com
Wed Aug 11 12:16:21 CEST 2021


Peter Robinson <pbrobinson at gmail.com> 于2021年7月22日周四 下午11:21写道:
>
> Sync the rk3399 DTs and associated bits from 5.14-rc1.
>
> Signed-off-by: Peter Robinson <pbrobinson at gmail.com>

Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>  arch/arm/dts/rk3399-evb.dts                   |   4 +
>  arch/arm/dts/rk3399-ficus.dts                 |  29 +-
>  arch/arm/dts/rk3399-firefly.dts               | 178 ++++++++++--
>  arch/arm/dts/rk3399-gru.dtsi                  |  14 +-
>  arch/arm/dts/rk3399-khadas-edge.dtsi          |  40 ++-
>  arch/arm/dts/rk3399-leez-p710.dts             |  14 +-
>  arch/arm/dts/rk3399-nanopc-t4.dts             |   1 +
>  arch/arm/dts/rk3399-nanopi-r4s.dts            | 135 +++++----
>  arch/arm/dts/rk3399-nanopi4.dtsi              |  18 +-
>  arch/arm/dts/rk3399-opp.dtsi                  |  40 +--
>  arch/arm/dts/rk3399-orangepi.dts              |  72 ++++-
>  arch/arm/dts/rk3399-pinebook-pro.dts          | 120 +++++---
>  arch/arm/dts/rk3399-puma-haikou.dts           |  10 +-
>  arch/arm/dts/rk3399-puma.dtsi                 |  61 +---
>  arch/arm/dts/rk3399-roc-pc-mezzanine.dts      |  22 +-
>  arch/arm/dts/rk3399-roc-pc.dtsi               |  59 +++-
>  arch/arm/dts/rk3399-rock-pi-4.dtsi            |  29 +-
>  arch/arm/dts/rk3399-rock-pi-4a.dts            |   2 +-
>  arch/arm/dts/rk3399-rock-pi-4b.dts            |   6 +-
>  arch/arm/dts/rk3399-rock-pi-4c.dts            |   6 +-
>  arch/arm/dts/rk3399-rock960.dts               |  82 ++----
>  arch/arm/dts/rk3399-rock960.dtsi              |  10 +-
>  arch/arm/dts/rk3399-rockpro64.dtsi            |  95 ++++++-
>  arch/arm/dts/rk3399.dtsi                      | 269 +++++++++++-------
>  arch/arm/dts/rk3399pro-vmarc-som.dtsi         |  22 +-
>  .../dts/rockchip-radxa-dalang-carrier.dtsi    |  21 ++
>  26 files changed, 897 insertions(+), 462 deletions(-)
>
> diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts
> index 694b0d08d6..7b717ebec8 100644
> --- a/arch/arm/dts/rk3399-evb.dts
> +++ b/arch/arm/dts/rk3399-evb.dts
> @@ -11,6 +11,10 @@
>         model = "Rockchip RK3399 Evaluation Board";
>         compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
>
> +       aliases {
> +               mmc0 = &sdhci;
> +       };
> +
>         backlight: backlight {
>                 compatible = "pwm-backlight";
>                 brightness-levels = <
> diff --git a/arch/arm/dts/rk3399-ficus.dts b/arch/arm/dts/rk3399-ficus.dts
> index ebe2ee77ba..1ce85a5816 100644
> --- a/arch/arm/dts/rk3399-ficus.dts
> +++ b/arch/arm/dts/rk3399-ficus.dts
> @@ -27,42 +27,43 @@
>         leds {
>                 compatible = "gpio-leds";
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,
> -                           <&user_led4>, <&wlan_led>, <&bt_led>;
> +               pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>,
> +                           <&user_led3_pin>, <&user_led4_pin>,
> +                           <&wlan_led_pin>, <&bt_led_pin>;
>
> -               user_led1 {
> +               user_led1: led-1 {
>                         label = "red:user1";
>                         gpios = <&gpio4 25 0>;
>                         linux,default-trigger = "heartbeat";
>                 };
>
> -               user_led2 {
> +               user_led2: led-2 {
>                         label = "red:user2";
>                         gpios = <&gpio4 26 0>;
>                         linux,default-trigger = "mmc0";
>                 };
>
> -               user_led3 {
> +               user_led3: led-3 {
>                         label = "red:user3";
>                         gpios = <&gpio4 30 0>;
>                         linux,default-trigger = "mmc1";
>                 };
>
> -               user_led4 {
> +               user_led4: led-4 {
>                         label = "red:user4";
>                         gpios = <&gpio1 0 0>;
>                         panic-indicator;
>                         linux,default-trigger = "none";
>                 };
>
> -               wlan_active_led {
> +               wlan_active_led: led-5 {
>                         label = "red:wlan";
>                         gpios = <&gpio1 1 0>;
>                         linux,default-trigger = "phy0tx";
>                         default-state = "off";
>                 };
>
> -               bt_active_led {
> +               bt_active_led: led-6 {
>                         label = "red:bt";
>                         gpios = <&gpio1 4 0>;
>                         linux,default-trigger = "hci0-power";
> @@ -114,32 +115,32 @@
>         };
>
>         leds {
> -               user_led1: user_led1 {
> +               user_led1_pin: user-led1-pin {
>                         rockchip,pins =
>                                 <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>
> -               user_led2: user_led2 {
> +               user_led2_pin: user-led2-pin {
>                         rockchip,pins =
>                                 <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>
> -               user_led3: user_led3 {
> +               user_led3_pin: user-led3-pin {
>                         rockchip,pins =
>                                 <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>
> -               user_led4: user_led4 {
> +               user_led4_pin: user-led4-pin {
>                         rockchip,pins =
>                                 <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>
> -               wlan_led: wlan_led {
> +               wlan_led_pin: wlan-led-pin {
>                         rockchip,pins =
>                                 <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>
> -               bt_led: bt_led {
> +               bt_led_pin: bt-led-pin {
>                         rockchip,pins =
>                                 <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
> diff --git a/arch/arm/dts/rk3399-firefly.dts b/arch/arm/dts/rk3399-firefly.dts
> index d63faf38cc..c4dd2a6b48 100644
> --- a/arch/arm/dts/rk3399-firefly.dts
> +++ b/arch/arm/dts/rk3399-firefly.dts
> @@ -6,6 +6,7 @@
>  /dts-v1/;
>  #include <dt-bindings/input/linux-event-codes.h>
>  #include <dt-bindings/pwm/pwm.h>
> +#include <dt-bindings/usb/pd.h>
>  #include "rk3399.dtsi"
>  #include "rk3399-opp.dtsi"
>
> @@ -13,6 +14,12 @@
>         model = "Firefly-RK3399 Board";
>         compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
>
> +       aliases {
> +               mmc0 = &sdio0;
> +               mmc1 = &sdmmc;
> +               mmc2 = &sdhci;
> +       };
> +
>         chosen {
>                 stdout-path = "serial2:1500000n8";
>         };
> @@ -88,18 +95,25 @@
>                 };
>         };
>
> +       ir-receiver {
> +               compatible = "gpio-ir-receiver";
> +               gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
> +               pinctrl-0 = <&ir_int>;
> +               pinctrl-names = "default";
> +       };
> +
>         leds {
>                 compatible = "gpio-leds";
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
> +               pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
>
> -               work-led {
> +               work_led: led-0 {
>                         label = "work";
>                         default-state = "on";
>                         gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
>                 };
>
> -               diy-led {
> +               diy_led: led-1 {
>                         label = "diy";
>                         default-state = "off";
>                         gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
> @@ -145,6 +159,23 @@
>                 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
>         };
>
> +       sound-dit {
> +               compatible = "audio-graph-card";
> +               label = "SPDIF";
> +               dais = <&spdif_p0>;
> +       };
> +
> +       spdif-dit {
> +               compatible = "linux,spdif-dit";
> +               #sound-dai-cells = <0>;
> +
> +               port {
> +                       dit_p0_0: endpoint {
> +                               remote-endpoint = <&spdif_p0_0>;
> +                       };
> +               };
> +       };
> +
>         /* switched by pmic_sleep */
>         vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
>                 compatible = "regulator-fixed";
> @@ -190,6 +221,17 @@
>                 vin-supply = <&vcc_sys>;
>         };
>
> +       vcc5v0_typec: vcc5v0-typec-regulator {
> +               compatible = "regulator-fixed";
> +               enable-active-high;
> +               gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&vcc5v0_typec_en>;
> +               regulator-name = "vcc5v0_typec";
> +               regulator-always-on;
> +               vin-supply = <&vcc_sys>;
> +       };
> +
>         vcc_sys: vcc-sys {
>                 compatible = "regulator-fixed";
>                 regulator-name = "vcc_sys";
> @@ -515,6 +557,53 @@
>         i2c-scl-falling-time-ns = <20>;
>         status = "okay";
>
> +       fusb0: typec-portc at 22 {
> +               compatible = "fcs,fusb302";
> +               reg = <0x22>;
> +               interrupt-parent = <&gpio1>;
> +               interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&fusb0_int>;
> +               vbus-supply = <&vcc5v0_typec>;
> +               status = "okay";
> +
> +               connector {
> +                       compatible = "usb-c-connector";
> +                       data-role = "host";
> +                       label = "USB-C";
> +                       op-sink-microwatt = <1000000>;
> +                       power-role = "dual";
> +                       sink-pdos =
> +                               <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
> +                       source-pdos =
> +                               <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
> +                       try-power-role = "sink";
> +
> +                       ports {
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               port at 0 {
> +                                       reg = <0>;
> +
> +                                       usbc_hs: endpoint {
> +                                               remote-endpoint =
> +                                                       <&u2phy0_typec_hs>;
> +                                       };
> +                               };
> +
> +                               port at 1 {
> +                                       reg = <1>;
> +
> +                                       usbc_ss: endpoint {
> +                                               remote-endpoint =
> +                                                       <&tcphy0_typec_ss>;
> +                                       };
> +                               };
> +                       };
> +               };
> +       };
> +
>         accelerometer at 68 {
>                 compatible = "invensense,mpu6500";
>                 reg = <0x68>;
> @@ -572,12 +661,34 @@
>                 };
>         };
>
> +       fusb302x {
> +               fusb0_int: fusb0-int {
> +                       rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
> +               };
> +       };
> +
> +       ir {
> +               ir_int: ir-int {
> +                       rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
> +               };
> +       };
> +
>         lcd-panel {
>                 lcd_panel_reset: lcd-panel-reset {
>                         rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
>                 };
>         };
>
> +       leds {
> +               work_led_pin: work-led-pin {
> +                       rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
> +               };
> +
> +               diy_led_pin: diy-led-pin {
> +                       rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
> +               };
> +       };
> +
>         pcie {
>                 pcie_pwr_en: pcie-pwr-en {
>                         rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
> @@ -589,18 +700,16 @@
>         };
>
>         pmic {
> -               vsel1_gpio: vsel1-gpio {
> -                       rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
> +               pmic_int_l: pmic-int-l {
> +                       rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
>                 };
>
> -               vsel2_gpio: vsel2-gpio {
> -                       rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
> +               vsel1_pin: vsel1-pin {
> +                       rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
>                 };
> -       };
>
> -       sdio-pwrseq {
> -               wifi_enable_h: wifi-enable-h {
> -                       rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> +               vsel2_pin: vsel2-pin {
> +                       rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
>                 };
>         };
>
> @@ -610,9 +719,15 @@
>                 };
>         };
>
> -       pmic {
> -               pmic_int_l: pmic-int-l {
> -                       rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
> +       sdio-pwrseq {
> +               wifi_enable_h: wifi-enable-h {
> +                       rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> +               };
> +       };
> +
> +       usb-typec {
> +               vcc5v0_typec_en: vcc5v0_typec_en {
> +                       rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
>                 };
>         };
>
> @@ -627,16 +742,6 @@
>                         rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>         };
> -
> -       leds {
> -               work_led_gpio: work_led-gpio {
> -                       rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
> -               };
> -
> -               diy_led_gpio: diy_led-gpio {
> -                       rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
> -               };
> -       };
>  };
>
>  &pwm0 {
> @@ -704,10 +809,29 @@
>         status = "okay";
>  };
>
> +&spdif {
> +       pinctrl-0 = <&spdif_bus_1>;
> +       status = "okay";
> +
> +       spdif_p0: port {
> +               spdif_p0_0: endpoint {
> +                       remote-endpoint = <&dit_p0_0>;
> +               };
> +       };
> +};
> +
>  &tcphy0 {
>         status = "okay";
>  };
>
> +&tcphy0_usb3 {
> +       port {
> +               tcphy0_typec_ss: endpoint {
> +                       remote-endpoint = <&usbc_ss>;
> +               };
> +       };
> +};
> +
>  &tcphy1 {
>         status = "okay";
>  };
> @@ -731,6 +855,12 @@
>                 phy-supply = <&vcc5v0_host>;
>                 status = "okay";
>         };
> +
> +       port {
> +               u2phy0_typec_hs: endpoint {
> +                       remote-endpoint = <&usbc_hs>;
> +               };
> +       };
>  };
>
>  &u2phy1 {
> diff --git a/arch/arm/dts/rk3399-gru.dtsi b/arch/arm/dts/rk3399-gru.dtsi
> index f9c5bb607b..b80f19066b 100644
> --- a/arch/arm/dts/rk3399-gru.dtsi
> +++ b/arch/arm/dts/rk3399-gru.dtsi
> @@ -10,6 +10,11 @@
>  #include "rk3399-op1-opp.dtsi"
>
>  / {
> +       aliases {
> +               mmc0 = &sdmmc;
> +               mmc1 = &sdhci;
> +       };
> +
>         chosen {
>                 stdout-path = "serial2:115200n8";
>         };
> @@ -247,8 +252,8 @@
>                 enable-active-high;
>                 enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
>                 gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
> -               states = <1800000 0x1
> -                         3000000 0x0>;
> +               states = <1800000 0x1>,
> +                        <3000000 0x0>;
>
>                 regulator-min-microvolt = <1800000>;
>                 regulator-max-microvolt = <3000000>;
> @@ -342,6 +347,7 @@
>         cpu-supply = <&ppvar_bigcpu>;
>  };
>
> +
>  &cru {
>         assigned-clocks =
>                 <&cru PLL_GPLL>, <&cru PLL_CPLL>,
> @@ -515,7 +521,7 @@ ap_i2c_audio: &i2c8 {
>          * configured as SDMMC and not JTAG.
>          */
>         pinctrl-names = "default";
> -       pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_gpio
> +       pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_pin
>                      &sdmmc_bus4>;
>
>         bus-width = <4>;
> @@ -766,7 +772,7 @@ ap_i2c_audio: &i2c8 {
>                 };
>
>                 /* This is where we actually hook up CD; has external pull */
> -               sdmmc_cd_gpio: sdmmc-cd-gpio {
> +               sdmmc_cd_pin: sdmmc-cd-pin {
>                         rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>         };
> diff --git a/arch/arm/dts/rk3399-khadas-edge.dtsi b/arch/arm/dts/rk3399-khadas-edge.dtsi
> index e87a044774..d5c7648c84 100644
> --- a/arch/arm/dts/rk3399-khadas-edge.dtsi
> +++ b/arch/arm/dts/rk3399-khadas-edge.dtsi
> @@ -11,6 +11,12 @@
>  #include "rk3399-opp.dtsi"
>
>  / {
> +       aliases {
> +               mmc0 = &sdio0;
> +               mmc1 = &sdmmc;
> +               mmc2 = &sdhci;
> +       };
> +
>         chosen {
>                 stdout-path = "serial2:1500000n8";
>         };
> @@ -138,18 +144,26 @@
>                 };
>         };
>
> +       ir-receiver {
> +               compatible = "gpio-ir-receiver";
> +               gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
> +               linux,rc-map-name = "rc-khadas";
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&ir_rx>;
> +       };
> +
>         leds {
>                 compatible = "gpio-leds";
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&sys_led_gpio>, <&user_led_gpio>;
> +               pinctrl-0 = <&sys_led_pin>, <&user_led_pin>;
>
> -               sys-led {
> +               sys_led: led-0 {
>                         label = "sys_led";
>                         linux,default-trigger = "heartbeat";
>                         gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
>                 };
>
> -               user-led {
> +               user_led: led-1 {
>                         label = "user_led";
>                         default-state = "off";
>                         gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>;
> @@ -585,12 +599,18 @@
>                 };
>         };
>
> +       ir {
> +               ir_rx: ir-rx {
> +                   rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
> +               };
> +       };
> +
>         leds {
> -               sys_led_gpio: sys_led-gpio {
> +               sys_led_pin: sys-led-pin {
>                         rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>
> -               user_led_gpio: user_led-gpio {
> +               user_led_pin: user-led-pin {
>                         rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>         };
> @@ -690,6 +710,16 @@
>         status = "okay";
>  };
>
> +&spi1 {
> +       status = "okay";
> +
> +       spiflash: flash at 0 {
> +               compatible = "winbond,w25q128fw", "jedec,spi-nor";
> +               reg = <0>;
> +               spi-max-frequency = <104000000>;
> +       };
> +};
> +
>  &tcphy0 {
>         status = "okay";
>  };
> diff --git a/arch/arm/dts/rk3399-leez-p710.dts b/arch/arm/dts/rk3399-leez-p710.dts
> index 73be38a537..7c93f840bc 100644
> --- a/arch/arm/dts/rk3399-leez-p710.dts
> +++ b/arch/arm/dts/rk3399-leez-p710.dts
> @@ -13,6 +13,12 @@
>         model = "Leez RK3399 P710";
>         compatible = "leez,p710", "rockchip,rk3399";
>
> +       aliases {
> +               mmc0 = &sdio0;
> +               mmc1 = &sdmmc;
> +               mmc2 = &sdhci;
> +       };
> +
>         chosen {
>                 stdout-path = "serial2:1500000n8";
>         };
> @@ -341,7 +347,7 @@
>                 reg = <0x40>;
>                 fcs,suspend-voltage-selector = <1>;
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&vsel1_gpio>;
> +               pinctrl-0 = <&vsel1_pin>;
>                 regulator-name = "vdd_cpu_b";
>                 regulator-min-microvolt = <712500>;
>                 regulator-max-microvolt = <1500000>;
> @@ -360,7 +366,7 @@
>                 reg = <0x41>;
>                 fcs,suspend-voltage-selector = <1>;
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&vsel2_gpio>;
> +               pinctrl-0 = <&vsel2_pin>;
>                 regulator-name = "vdd_gpu";
>                 regulator-min-microvolt = <712500>;
>                 regulator-max-microvolt = <1500000>;
> @@ -447,11 +453,11 @@
>                         rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
>                 };
>
> -               vsel1_gpio: vsel1-gpio {
> +               vsel1_pin: vsel1-pin {
>                         rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
>                 };
>
> -               vsel2_gpio: vsel2-gpio {
> +               vsel2_pin: vsel2-pin {
>                         rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
>                 };
>         };
> diff --git a/arch/arm/dts/rk3399-nanopc-t4.dts b/arch/arm/dts/rk3399-nanopc-t4.dts
> index e0d75617bb..452728b82e 100644
> --- a/arch/arm/dts/rk3399-nanopc-t4.dts
> +++ b/arch/arm/dts/rk3399-nanopc-t4.dts
> @@ -95,6 +95,7 @@
>  };
>
>  &pcie0 {
> +       ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
>         num-lanes = <4>;
>         vpcie3v3-supply = <&vcc3v3_sys>;
>  };
> diff --git a/arch/arm/dts/rk3399-nanopi-r4s.dts b/arch/arm/dts/rk3399-nanopi-r4s.dts
> index 6f2cf17bf1..cef4d18b59 100644
> --- a/arch/arm/dts/rk3399-nanopi-r4s.dts
> +++ b/arch/arm/dts/rk3399-nanopi-r4s.dts
> @@ -1,13 +1,15 @@
>  // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>  /*
> - * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
> + * FriendlyElec NanoPC-T4 board device tree source
>   *
> - * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
> + * Copyright (c) 2020 FriendlyElec Computer Tech. Co., Ltd.
>   * (http://www.friendlyarm.com)
>   *
>   * Copyright (c) 2018 Collabora Ltd.
> - * Copyright (c) 2019 Arm Ltd.
> - * Copyright (C) 2020 Xiaobo <peterwillcn at gmail.com>
> + *
> + * Copyright (c) 2020 Jensen Huang <jensenhuang at friendlyarm.com>
> + * Copyright (c) 2020 Marty Jones <mj8263788 at gmail.com>
> + * Copyright (c) 2021 Tianling Shen <cnsztl at gmail.com>
>   */
>
>  /dts-v1/;
> @@ -17,94 +19,87 @@
>         model = "FriendlyElec NanoPi R4S";
>         compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
>
> -       aliases {
> -               ethernet1 = &r8169;
> -       };
> +       /delete-node/ display-subsystem;
>
> -       vdd_5v: vdd-5v {
> -               compatible = "regulator-fixed";
> -               regulator-name = "vdd_5v";
> -               regulator-always-on;
> -               regulator-boot-on;
> -       };
> +       gpio-leds {
> +               pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
>
> -       fan: pwm-fan {
> -               compatible = "pwm-fan";
> -               cooling-levels = <0 12 18 255>;
> -               #cooling-cells = <2>;
> -               fan-supply = <&vdd_5v>;
> -               pwms = <&pwm1 0 50000 0>;
> -       };
> -};
> +               /delete-node/ led-0;
>
> -&cpu_thermal {
> -       trips {
> -               cpu_warm: cpu_warm {
> -                       temperature = <55000>;
> -                       hysteresis = <2000>;
> -                       type = "active";
> +               lan_led: led-lan {
> +                       gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
> +                       label = "green:lan";
>                 };
>
> -               cpu_hot: cpu_hot {
> -                       temperature = <65000>;
> -                       hysteresis = <2000>;
> -                       type = "active";
> +               sys_led: led-sys {
> +                       gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
> +                       label = "red:power";
> +                       default-state = "on";
>                 };
> -       };
>
> -       cooling-maps {
> -               map2 {
> -                       trip = <&cpu_warm>;
> -                       cooling-device = <&fan THERMAL_NO_LIMIT 1>;
> +               wan_led: led-wan {
> +                       gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
> +                       label = "green:wan";
>                 };
> +       };
> +
> +       gpio-keys {
> +               pinctrl-0 = <&reset_button_pin>;
> +
> +               /delete-node/ power;
>
> -               map3 {
> -                       trip = <&cpu_hot>;
> -                       cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
> +               reset {
> +                       debounce-interval = <50>;
> +                       gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
> +                       label = "reset";
> +                       linux,code = <KEY_RESTART>;
>                 };
>         };
> +
> +       vdd_5v: vdd-5v {
> +               compatible = "regulator-fixed";
> +               regulator-name = "vdd_5v";
> +               regulator-always-on;
> +               regulator-boot-on;
> +       };
>  };
>
>  &emmc_phy {
>         status = "disabled";
>  };
>
> -&fusb0 {
> +&i2c4 {
>         status = "disabled";
>  };
>
> -&leds {
> -       lan_led: led-1 {
> -               gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
> -               label = "nanopi-r4s:green:lan";
> -       };
> -
> -       wan_led: led-2 {
> -               gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
> -               label = "nanopi-r4s:green:wan";
> -       };
> -};
> -
> -&leds_gpio {
> -       rockchip,pins =
> -               <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
> -               <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
> -               <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
> -};
> -
>  &pcie0 {
>         max-link-speed = <1>;
>         num-lanes = <1>;
>         vpcie3v3-supply = <&vcc3v3_sys>;
> +};
>
> -       pcie at 0 {
> -               reg = <0x00000000 0 0 0 0>;
> -               #address-cells = <3>;
> -               #size-cells = <2>;
> +&pinctrl {
> +       gpio-leds {
> +               /delete-node/ status-led-pin;
>
> -               r8169: pcie at 0,0 {
> -                       reg = <0x000000 0 0 0 0>;
> -                       local-mac-address = [ 00 00 00 00 00 00 ];
> +               lan_led_pin: lan-led-pin {
> +                       rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
> +               };
> +
> +               sys_led_pin: sys-led-pin {
> +                       rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
> +               };
> +
> +               wan_led_pin: wan-led-pin {
> +                       rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
> +               };
> +       };
> +
> +       rockchip-key {
> +               /delete-node/ power-key;
> +
> +               reset_button_pin: reset-button-pin {
> +                       rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
>                 };
>         };
>  };
> @@ -117,10 +112,6 @@
>         status = "disabled";
>  };
>
> -&sdmmc {
> -       host-index-min = <1>;
> -};
> -
>  &u2phy0_host {
>         phy-supply = <&vdd_5v>;
>  };
> @@ -129,6 +120,10 @@
>         status = "disabled";
>  };
>
> +&uart0 {
> +       status = "disabled";
> +};
> +
>  &usbdrd_dwc3_0 {
>         dr_mode = "host";
>  };
> diff --git a/arch/arm/dts/rk3399-nanopi4.dtsi b/arch/arm/dts/rk3399-nanopi4.dtsi
> index c88018a0ef..8c0ff6c96e 100644
> --- a/arch/arm/dts/rk3399-nanopi4.dtsi
> +++ b/arch/arm/dts/rk3399-nanopi4.dtsi
> @@ -17,6 +17,12 @@
>  #include "rk3399-opp.dtsi"
>
>  / {
> +       aliases {
> +               mmc0 = &sdio0;
> +               mmc1 = &sdmmc;
> +               mmc2 = &sdhci;
> +       };
> +
>         chosen {
>                 stdout-path = "serial2:1500000n8";
>         };
> @@ -117,9 +123,9 @@
>         leds: gpio-leds {
>                 compatible = "gpio-leds";
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&leds_gpio>;
> +               pinctrl-0 = <&status_led_pin>;
>
> -               status {
> +               status_led: led-0 {
>                         gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
>                         label = "status_led";
>                         linux,default-trigger = "heartbeat";
> @@ -182,7 +188,7 @@
>                 #address-cells = <1>;
>                 #size-cells = <0>;
>
> -               rtl8211e: phy at 1 {
> +               rtl8211e: ethernet-phy at 1 {
>                         reg = <1>;
>                         interrupt-parent = <&gpio3>;
>                         interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
> @@ -504,8 +510,6 @@
>  };
>
>  &pcie0 {
> -       ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
> -       max-link-speed = <2>;
>         num-lanes = <2>;
>         vpcie0v9-supply = <&vcca0v9_s3>;
>         vpcie1v8-supply = <&vcca1v8_s3>;
> @@ -520,12 +524,12 @@
>         };
>
>         gpio-leds {
> -               leds_gpio: leds-gpio {
> +               status_led_pin: status-led-pin {
>                         rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>         };
>
> -       phy {
> +       gmac {
>                 phy_intb: phy-intb {
>                         rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
>                 };
> diff --git a/arch/arm/dts/rk3399-opp.dtsi b/arch/arm/dts/rk3399-opp.dtsi
> index d6f1095abb..da41cd81eb 100644
> --- a/arch/arm/dts/rk3399-opp.dtsi
> +++ b/arch/arm/dts/rk3399-opp.dtsi
> @@ -10,28 +10,28 @@
>
>                 opp00 {
>                         opp-hz = /bits/ 64 <408000000>;
> -                       opp-microvolt = <800000>;
> +                       opp-microvolt = <825000 825000 1250000>;
>                         clock-latency-ns = <40000>;
>                 };
>                 opp01 {
>                         opp-hz = /bits/ 64 <600000000>;
> -                       opp-microvolt = <800000>;
> +                       opp-microvolt = <825000 825000 1250000>;
>                 };
>                 opp02 {
>                         opp-hz = /bits/ 64 <816000000>;
> -                       opp-microvolt = <850000>;
> +                       opp-microvolt = <850000 850000 1250000>;
>                 };
>                 opp03 {
>                         opp-hz = /bits/ 64 <1008000000>;
> -                       opp-microvolt = <925000>;
> +                       opp-microvolt = <925000 925000 1250000>;
>                 };
>                 opp04 {
>                         opp-hz = /bits/ 64 <1200000000>;
> -                       opp-microvolt = <1000000>;
> +                       opp-microvolt = <1000000 1000000 1250000>;
>                 };
>                 opp05 {
>                         opp-hz = /bits/ 64 <1416000000>;
> -                       opp-microvolt = <1125000>;
> +                       opp-microvolt = <1125000 1125000 1250000>;
>                 };
>         };
>
> @@ -41,36 +41,36 @@
>
>                 opp00 {
>                         opp-hz = /bits/ 64 <408000000>;
> -                       opp-microvolt = <800000>;
> +                       opp-microvolt = <825000 825000 1250000>;
>                         clock-latency-ns = <40000>;
>                 };
>                 opp01 {
>                         opp-hz = /bits/ 64 <600000000>;
> -                       opp-microvolt = <800000>;
> +                       opp-microvolt = <825000 825000 1250000>;
>                 };
>                 opp02 {
>                         opp-hz = /bits/ 64 <816000000>;
> -                       opp-microvolt = <825000>;
> +                       opp-microvolt = <825000 825000 1250000>;
>                 };
>                 opp03 {
>                         opp-hz = /bits/ 64 <1008000000>;
> -                       opp-microvolt = <875000>;
> +                       opp-microvolt = <875000 875000 1250000>;
>                 };
>                 opp04 {
>                         opp-hz = /bits/ 64 <1200000000>;
> -                       opp-microvolt = <950000>;
> +                       opp-microvolt = <950000 950000 1250000>;
>                 };
>                 opp05 {
>                         opp-hz = /bits/ 64 <1416000000>;
> -                       opp-microvolt = <1025000>;
> +                       opp-microvolt = <1025000 1025000 1250000>;
>                 };
>                 opp06 {
>                         opp-hz = /bits/ 64 <1608000000>;
> -                       opp-microvolt = <1100000>;
> +                       opp-microvolt = <1100000 1100000 1250000>;
>                 };
>                 opp07 {
>                         opp-hz = /bits/ 64 <1800000000>;
> -                       opp-microvolt = <1200000>;
> +                       opp-microvolt = <1200000 1200000 1250000>;
>                 };
>         };
>
> @@ -79,27 +79,27 @@
>
>                 opp00 {
>                         opp-hz = /bits/ 64 <200000000>;
> -                       opp-microvolt = <800000>;
> +                       opp-microvolt = <825000 825000 1150000>;
>                 };
>                 opp01 {
>                         opp-hz = /bits/ 64 <297000000>;
> -                       opp-microvolt = <800000>;
> +                       opp-microvolt = <825000 825000 1150000>;
>                 };
>                 opp02 {
>                         opp-hz = /bits/ 64 <400000000>;
> -                       opp-microvolt = <825000>;
> +                       opp-microvolt = <825000 825000 1150000>;
>                 };
>                 opp03 {
>                         opp-hz = /bits/ 64 <500000000>;
> -                       opp-microvolt = <875000>;
> +                       opp-microvolt = <875000 875000 1150000>;
>                 };
>                 opp04 {
>                         opp-hz = /bits/ 64 <600000000>;
> -                       opp-microvolt = <925000>;
> +                       opp-microvolt = <925000 925000 1150000>;
>                 };
>                 opp05 {
>                         opp-hz = /bits/ 64 <800000000>;
> -                       opp-microvolt = <1100000>;
> +                       opp-microvolt = <1100000 1100000 1150000>;
>                 };
>         };
>  };
> diff --git a/arch/arm/dts/rk3399-orangepi.dts b/arch/arm/dts/rk3399-orangepi.dts
> index f9f7246d4d..04b54abea3 100644
> --- a/arch/arm/dts/rk3399-orangepi.dts
> +++ b/arch/arm/dts/rk3399-orangepi.dts
> @@ -7,6 +7,7 @@
>
>  #include "dt-bindings/pwm/pwm.h"
>  #include "dt-bindings/input/input.h"
> +#include "dt-bindings/usb/pd.h"
>  #include "rk3399.dtsi"
>  #include "rk3399-opp.dtsi"
>
> @@ -14,6 +15,12 @@
>         model = "Orange Pi RK3399 Board";
>         compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
>
> +       aliases {
> +               mmc0 = &sdio0;
> +               mmc1 = &sdmmc;
> +               mmc2 = &sdhci;
> +       };
> +
>         chosen {
>                 stdout-path = "serial2:1500000n8";
>         };
> @@ -214,7 +221,7 @@
>                 #address-cells = <1>;
>                 #size-cells = <0>;
>
> -               rtl8211e: phy at 1 {
> +               rtl8211e: ethernet-phy at 1 {
>                         reg = <1>;
>                         interrupt-parent = <&gpio3>;
>                         interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
> @@ -531,6 +538,43 @@
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&chg_cc_int_l>;
>                 vbus-supply = <&vbus_typec>;
> +
> +               typec_con: connector {
> +                       compatible = "usb-c-connector";
> +                       data-role = "host";
> +                       label = "USB-C";
> +                       op-sink-microwatt = <1000000>;
> +                       power-role = "dual";
> +                       sink-pdos =
> +                               <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
> +                       source-pdos =
> +                               <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
> +                       try-power-role = "sink";
> +
> +                       ports {
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               port at 0 {
> +                                       reg = <0>;
> +                                       typec_hs: endpoint {
> +                                               remote-endpoint = <&u2phy0_typec_hs>;
> +                                       };
> +                               };
> +                               port at 1 {
> +                                       reg = <1>;
> +                                       typec_ss: endpoint {
> +                                               remote-endpoint = <&tcphy0_typec_ss>;
> +                                       };
> +                               };
> +                               port at 2 {
> +                                       reg = <2>;
> +                                       typec_dp: endpoint {
> +                                               remote-endpoint = <&tcphy0_typec_dp>;
> +                                       };
> +                               };
> +                       };
> +               };
>         };
>  };
>
> @@ -554,7 +598,7 @@
>                 };
>         };
>
> -       phy {
> +       gmac {
>                 phy_intb: phy-intb {
>                         rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
>                 };
> @@ -717,6 +761,22 @@
>         status = "okay";
>  };
>
> +&tcphy0_dp {
> +       port {
> +               tcphy0_typec_dp: endpoint {
> +                       remote-endpoint = <&typec_dp>;
> +               };
> +       };
> +};
> +
> +&tcphy0_usb3 {
> +       port {
> +               tcphy0_typec_ss: endpoint {
> +                       remote-endpoint = <&typec_ss>;
> +               };
> +       };
> +};
> +
>  &tcphy1 {
>         status = "okay";
>  };
> @@ -739,6 +799,12 @@
>                 phy-supply = <&vcc5v0_host>;
>                 status = "okay";
>         };
> +
> +       port {
> +               u2phy0_typec_hs: endpoint {
> +                       remote-endpoint = <&typec_hs>;
> +               };
> +       };
>  };
>
>  &u2phy1 {
> @@ -799,7 +865,7 @@
>
>  &usbdrd_dwc3_0 {
>         status = "okay";
> -       dr_mode = "otg";
> +       dr_mode = "host";
>  };
>
>  &usbdrd3_1 {
> diff --git a/arch/arm/dts/rk3399-pinebook-pro.dts b/arch/arm/dts/rk3399-pinebook-pro.dts
> index 294d21bf45..2b5f001ff4 100644
> --- a/arch/arm/dts/rk3399-pinebook-pro.dts
> +++ b/arch/arm/dts/rk3399-pinebook-pro.dts
> @@ -18,6 +18,12 @@
>         model = "Pine64 Pinebook Pro";
>         compatible = "pine64,pinebook-pro", "rockchip,rk3399";
>
> +       aliases {
> +               mmc0 = &sdio0;
> +               mmc1 = &sdmmc;
> +               mmc2 = &sdhci;
> +       };
> +
>         chosen {
>                 stdout-path = "serial2:1500000n8";
>         };
> @@ -28,12 +34,19 @@
>                 pwms = <&pwm0 0 740740 0>;
>         };
>
> +       bat: battery {
> +               compatible = "simple-battery";
> +               charge-full-design-microamp-hours = <9800000>;
> +               voltage-max-design-microvolt = <4350000>;
> +               voltage-min-design-microvolt = <3000000>;
> +       };
> +
>         edp_panel: edp-panel {
>                 compatible = "boe,nv140fhmn49";
>                 backlight = <&backlight>;
>                 enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&panel_en_gpio>;
> +               pinctrl-0 = <&panel_en_pin>;
>                 power-supply = <&vcc3v3_panel>;
>
>                 ports {
> @@ -60,7 +73,7 @@
>         gpio-key-lid {
>                 compatible = "gpio-keys";
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&lidbtn_gpio>;
> +               pinctrl-0 = <&lidbtn_pin>;
>
>                 lid {
>                         debounce-interval = <20>;
> @@ -76,7 +89,7 @@
>         gpio-key-power {
>                 compatible = "gpio-keys";
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&pwrbtn_gpio>;
> +               pinctrl-0 = <&pwrbtn_pin>;
>
>                 power {
>                         debounce-interval = <20>;
> @@ -90,9 +103,9 @@
>         leds {
>                 compatible = "gpio-leds";
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&pwrled_gpio &slpled_gpio>;
> +               pinctrl-0 = <&pwr_led_pin &slp_led_pin>;
>
> -               green-led {
> +               green_led: led-0 {
>                         color = <LED_COLOR_ID_GREEN>;
>                         default-state = "on";
>                         function = LED_FUNCTION_POWER;
> @@ -100,7 +113,7 @@
>                         label = "green:power";
>                 };
>
> -               red-led {
> +               red_led: led-1 {
>                         color = <LED_COLOR_ID_RED>;
>                         default-state = "off";
>                         function = LED_FUNCTION_STANDBY;
> @@ -117,7 +130,7 @@
>                 clocks = <&rk808 1>;
>                 clock-names = "ext_clock";
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&wifi_enable_h_gpio>;
> +               pinctrl-0 = <&wifi_enable_h_pin>;
>                 post-power-on-delay-ms = <100>;
>                 power-off-delay-us = <500000>;
>
> @@ -129,7 +142,7 @@
>         es8316-sound {
>                 compatible = "simple-audio-card";
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&hp_det_gpio>;
> +               pinctrl-0 = <&hp_det_pin>;
>                 simple-audio-card,name = "rockchip,es8316-codec";
>                 simple-audio-card,format = "i2s";
>                 simple-audio-card,mclk-fs = <256>;
> @@ -213,7 +226,7 @@
>                 enable-active-high;
>                 gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&pwr_5v_gpio>;
> +               pinctrl-0 = <&pwr_5v_pin>;
>                 regulator-name = "vcc5v0_usb";
>                 regulator-always-on;
>                 regulator-min-microvolt = <5000000>;
> @@ -270,7 +283,7 @@
>                 enable-active-high;
>                 gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&sdmmc0_pwr_h_gpio>;
> +               pinctrl-0 = <&sdmmc0_pwr_h_pin>;
>                 regulator-name = "vcc3v0_sd";
>                 regulator-always-on;
>                 regulator-min-microvolt = <3000000>;
> @@ -288,7 +301,7 @@
>                 enable-active-high;
>                 gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&lcdvcc_en_gpio>;
> +               pinctrl-0 = <&lcdvcc_en_pin>;
>                 regulator-name = "vcc3v3_panel";
>                 regulator-always-on;
>                 regulator-min-microvolt = <3300000>;
> @@ -317,7 +330,7 @@
>                 enable-active-high;
>                 gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&vcc5v0_host_en_gpio>;
> +               pinctrl-0 = <&vcc5v0_host_en_pin>;
>                 regulator-name = "vcc5v0_otg";
>                 regulator-always-on;
>                 regulator-min-microvolt = <5000000>;
> @@ -336,7 +349,7 @@
>                 enable-active-high;
>                 gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&vcc5v0_typec0_en_gpio>;
> +               pinctrl-0 = <&vcc5v0_typec0_en_pin>;
>                 regulator-name = "vbus_5vout";
>                 regulator-min-microvolt = <5000000>;
>                 regulator-max-microvolt = <5000000>;
> @@ -368,7 +381,7 @@
>
>                 /* Also triggered by USB charger */
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&dc_det_gpio>;
> +               pinctrl-0 = <&dc_det_pin>;
>         };
>  };
>
> @@ -447,7 +460,7 @@
>                 interrupt-parent = <&gpio3>;
>                 interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&pmic_int_l_gpio>;
> +               pinctrl-0 = <&pmic_int_l_pin>;
>                 rockchip,system-power-controller;
>                 wakeup-source;
>
> @@ -627,7 +640,7 @@
>                 reg = <0x40>;
>                 fcs,suspend-voltage-selector = <1>;
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&vsel1_gpio>;
> +               pinctrl-0 = <&vsel1_pin>;
>                 regulator-name = "vdd_cpu_b";
>                 regulator-always-on;
>                 regulator-boot-on;
> @@ -646,7 +659,7 @@
>                 reg = <0x41>;
>                 fcs,suspend-voltage-selector = <1>;
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&vsel2_gpio>;
> +               pinctrl-0 = <&vsel2_pin>;
>                 regulator-name = "vdd_gpu";
>                 regulator-always-on;
>                 regulator-boot-on;
> @@ -690,9 +703,10 @@
>         fusb0: fusb30x at 22 {
>                 compatible = "fcs,fusb302";
>                 reg = <0x22>;
> -               fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
> +               interrupt-parent = <&gpio1>;
> +               interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&fusb0_int_gpio>;
> +               pinctrl-0 = <&fusb0_int_pin>;
>                 vbus-supply = <&vbus_typec>;
>
>                 connector {
> @@ -740,12 +754,29 @@
>                         };
>                 };
>         };
> +
> +       cw2015 at 62 {
> +               compatible = "cellwise,cw2015";
> +               reg = <0x62>;
> +               cellwise,battery-profile = /bits/ 8 <
> +                       0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63
> +                       0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36
> +                       0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69
> +                       0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59
> +                       0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17
> +                       0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D
> +                       0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB
> +                       0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11
> +               >;
> +               cellwise,monitor-interval-ms = <5000>;
> +               monitored-battery = <&bat>;
> +               power-supplies = <&mains_charger>, <&fusb0>;
> +       };
>  };
>
>  &i2s1 {
> -       #sound-dai-cells = <0>;
>         pinctrl-names = "default";
> -       pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>;
> +       pinctrl-0 = <&i2s_8ch_mclk_pin>, <&i2s1_2ch_bus>;
>         rockchip,capture-channels = <8>;
>         rockchip,playback-channels = <8>;
>         status = "okay";
> @@ -765,7 +796,6 @@
>  &pcie0 {
>         bus-scan-delay-ms = <1000>;
>         ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
> -       max-link-speed = <2>;
>         num-lanes = <4>;
>         pinctrl-names = "default";
>         pinctrl-0 = <&pcie_clkreqn_cpm>;
> @@ -777,116 +807,116 @@
>
>  &pinctrl {
>         buttons {
> -               pwrbtn_gpio: pwrbtn-gpio {
> +               pwrbtn_pin: pwrbtn-pin {
>                         rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
>                 };
>
> -               lidbtn_gpio: lidbtn-gpio {
> +               lidbtn_pin: lidbtn-pin {
>                         rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
>                 };
>         };
>
>         dc-charger {
> -               dc_det_gpio: dc-det-gpio {
> +               dc_det_pin: dc-det-pin {
>                         rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
>                 };
>         };
>
>         es8316 {
> -               hp_det_gpio: hp-det-gpio {
> +               hp_det_pin: hp-det-pin {
>                         rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
>                 };
>         };
>
>         fusb302x {
> -               fusb0_int_gpio: fusb0-int-gpio {
> +               fusb0_int_pin: fusb0-int-pin {
>                         rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
>                 };
>         };
>
>         i2s1 {
> -               i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio {
> +               i2s_8ch_mclk_pin: i2s-8ch-mclk-pin {
>                         rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
>                 };
>         };
>
>         lcd-panel {
> -               lcdvcc_en_gpio: lcdvcc-en-gpio {
> +               lcdvcc_en_pin: lcdvcc-en-pin {
>                         rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>
> -               panel_en_gpio: panel-en-gpio {
> +               panel_en_pin: panel-en-pin {
>                         rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>
> -               lcd_panel_reset_gpio: lcd-panel-reset-gpio {
> +               lcd_panel_reset_pin: lcd-panel-reset-pin {
>                         rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
>                 };
>         };
>
>         leds {
> -               pwrled_gpio: pwrled_gpio {
> +               pwr_led_pin: pwr-led-pin {
>                         rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>
> -               slpled_gpio: slpled_gpio {
> +               slp_led_pin: slp-led-pin {
>                         rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>         };
>
>         pmic {
> -               pmic_int_l_gpio: pmic-int-l-gpio {
> +               pmic_int_l_pin: pmic-int-l-pin {
>                         rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
>                 };
>
> -               vsel1_gpio: vsel1-gpio {
> +               vsel1_pin: vsel1-pin {
>                         rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
>                 };
>
> -               vsel2_gpio: vsel2-gpio {
> +               vsel2_pin: vsel2-pin {
>                         rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
>                 };
>         };
>
>         sdcard {
> -               sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio {
> +               sdmmc0_pwr_h_pin: sdmmc0-pwr-h-pin {
>                         rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>
>         };
>
>         sdio-pwrseq {
> -               wifi_enable_h_gpio: wifi-enable-h-gpio {
> +               wifi_enable_h_pin: wifi-enable-h-pin {
>                         rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>         };
>
>         usb-typec {
> -               vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio {
> +               vcc5v0_typec0_en_pin: vcc5v0-typec0-en-pin {
>                         rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
>                 };
>         };
>
>         usb2 {
> -               pwr_5v_gpio: pwr-5v-gpio {
> +               pwr_5v_pin: pwr-5v-pin {
>                         rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>
> -               vcc5v0_host_en_gpio: vcc5v0-host-en-gpio {
> +               vcc5v0_host_en_pin: vcc5v0-host-en-pin {
>                         rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>         };
>
>         wireless-bluetooth {
> -               bt_wake_gpio: bt-wake-gpio {
> +               bt_wake_pin: bt-wake-pin {
>                         rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>
> -               bt_host_wake_gpio: bt-host-wake-gpio {
> +               bt_host_wake_pin: bt-host-wake-pin {
>                         rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>
> -               bt_reset_gpio: bt-reset-gpio {
> +               bt_reset_pin: bt-reset-pin {
>                         rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>         };
> @@ -1034,7 +1064,7 @@
>                 host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
>                 max-speed = <1500000>;
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>;
> +               pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>;
>                 shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
>                 vbat-supply = <&wifi_bat>;
>                 vddio-supply = <&vcc_wl>;
> diff --git a/arch/arm/dts/rk3399-puma-haikou.dts b/arch/arm/dts/rk3399-puma-haikou.dts
> index d80d6b7268..292bb7e80c 100644
> --- a/arch/arm/dts/rk3399-puma-haikou.dts
> +++ b/arch/arm/dts/rk3399-puma-haikou.dts
> @@ -10,14 +10,18 @@
>         model = "Theobroma Systems RK3399-Q7 SoM";
>         compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399";
>
> +       aliases {
> +               mmc1 = &sdmmc;
> +       };
> +
>         chosen {
>                 stdout-path = "serial0:115200n8";
>         };
>
>         leds {
> -               pinctrl-0 = <&led_pin_module>, <&led_sd_haikou>;
> +               pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
>
> -               sd-card-led {
> +               sd_card_led: led-1 {
>                         label = "sd_card_led";
>                         gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
>                         linux,default-trigger = "mmc0";
> @@ -179,7 +183,7 @@
>         };
>
>         leds {
> -               led_sd_haikou: led-sd-gpio {
> +               sd_card_led_pin: sd-card-led-pin {
>                         rockchip,pins =
>                           <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
> diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
> index 72c06abd27..fb67db4619 100644
> --- a/arch/arm/dts/rk3399-puma.dtsi
> +++ b/arch/arm/dts/rk3399-puma.dtsi
> @@ -8,12 +8,16 @@
>  #include "rk3399-opp.dtsi"
>
>  / {
> +       aliases {
> +               mmc0 = &sdhci;
> +       };
> +
>         leds {
>                 compatible = "gpio-leds";
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&led_pin_module>;
> +               pinctrl-0 = <&module_led_pin>;
>
> -               module-led {
> +               module_led: led-0 {
>                         label = "module_led";
>                         gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
>                         linux,default-trigger = "heartbeat";
> @@ -21,57 +25,6 @@
>                 };
>         };
>
> -       /*
> -        * Overwrite the opp-table for CPUB as this board uses a different
> -        * regulator (FAN53555) that only allows 10mV steps and therefore
> -        * can't reach the operation point target voltages from rk3399-opp.dtsi
> -        */
> -       /delete-node/ opp-table1;
> -       cluster1_opp: opp-table1 {
> -               compatible = "operating-points-v2";
> -               opp-shared;
> -
> -               opp00 {
> -                       opp-hz = /bits/ 64 <408000000>;
> -                       opp-microvolt = <800000>;
> -                       clock-latency-ns = <40000>;
> -               };
> -               opp01 {
> -                       opp-hz = /bits/ 64 <600000000>;
> -                       opp-microvolt = <800000>;
> -               };
> -               opp02 {
> -                       opp-hz = /bits/ 64 <816000000>;
> -                       opp-microvolt = <830000>;
> -                       opp-suspend;
> -               };
> -               opp03 {
> -                       opp-hz = /bits/ 64 <1008000000>;
> -                       opp-microvolt = <880000>;
> -               };
> -               opp04 {
> -                       opp-hz = /bits/ 64 <1200000000>;
> -                       opp-microvolt = <950000>;
> -               };
> -               opp05 {
> -                       opp-hz = /bits/ 64 <1416000000>;
> -                       opp-microvolt = <1030000>;
> -               };
> -               opp06 {
> -                       opp-hz = /bits/ 64 <1608000000>;
> -                       opp-microvolt = <1100000>;
> -               };
> -               opp07 {
> -                       opp-hz = /bits/ 64 <1800000000>;
> -                       opp-microvolt = <1200000>;
> -               };
> -               opp08 {
> -                       opp-hz = /bits/ 64 <1992000000>;
> -                       opp-microvolt = <1230000>;
> -                       turbo-mode;
> -               };
> -       };
> -
>         clkin_gmac: external-gmac-clock {
>                 compatible = "fixed-clock";
>                 clock-frequency = <125000000>;
> @@ -450,7 +403,7 @@
>         };
>
>         leds {
> -               led_pin_module: led-module-gpio {
> +               module_led_pin: module-led-pin {
>                         rockchip,pins =
>                           <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
> diff --git a/arch/arm/dts/rk3399-roc-pc-mezzanine.dts b/arch/arm/dts/rk3399-roc-pc-mezzanine.dts
> index 2acb3d500f..9447c8724b 100644
> --- a/arch/arm/dts/rk3399-roc-pc-mezzanine.dts
> +++ b/arch/arm/dts/rk3399-roc-pc-mezzanine.dts
> @@ -11,6 +11,20 @@
>         model = "Firefly ROC-RK3399-PC Mezzanine Board";
>         compatible = "firefly,roc-rk3399-pc-mezzanine", "rockchip,rk3399";
>
> +       aliases {
> +               mmc2 = &sdio0;
> +       };
> +
> +       /* MP8009 PoE PD */
> +       poe_12v: poe-12v {
> +               compatible = "regulator-fixed";
> +               regulator-name = "poe_12v";
> +               regulator-always-on;
> +               regulator-boot-on;
> +               regulator-min-microvolt = <12000000>;
> +               regulator-max-microvolt = <12000000>;
> +       };
> +
>         vcc3v3_ngff: vcc3v3-ngff {
>                 compatible = "regulator-fixed";
>                 regulator-name = "vcc3v3_ngff";
> @@ -22,7 +36,7 @@
>                 regulator-boot-on;
>                 regulator-min-microvolt = <3300000>;
>                 regulator-max-microvolt = <3300000>;
> -               vin-supply = <&dc_12v>;
> +               vin-supply = <&sys_12v>;
>         };
>
>         vcc3v3_pcie: vcc3v3-pcie {
> @@ -34,10 +48,14 @@
>                 pinctrl-0 = <&vcc3v3_pcie_en>;
>                 regulator-min-microvolt = <3300000>;
>                 regulator-max-microvolt = <3300000>;
> -               vin-supply = <&dc_12v>;
> +               vin-supply = <&sys_12v>;
>         };
>  };
>
> +&sys_12v {
> +       vin-supply = <&poe_12v>;
> +};
> +
>  &pcie_phy {
>         status = "okay";
>  };
> diff --git a/arch/arm/dts/rk3399-roc-pc.dtsi b/arch/arm/dts/rk3399-roc-pc.dtsi
> index 9f225e9c3d..d1aaf8e833 100644
> --- a/arch/arm/dts/rk3399-roc-pc.dtsi
> +++ b/arch/arm/dts/rk3399-roc-pc.dtsi
> @@ -13,6 +13,11 @@
>         model = "Firefly ROC-RK3399-PC Board";
>         compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
>
> +       aliases {
> +               mmc0 = &sdmmc;
> +               mmc1 = &sdhci;
> +       };
> +
>         chosen {
>                 stdout-path = "serial2:1500000n8";
>         };
> @@ -58,30 +63,37 @@
>                 };
>         };
>
> +       ir-receiver {
> +               compatible = "gpio-ir-receiver";
> +               gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&ir_int>;
> +       };
> +
>         leds {
>                 compatible = "gpio-leds";
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>;
> +               pinctrl-0 = <&work_led_pin>, <&diy_led_pin>, <&yellow_led_pin>;
>
> -               work-led {
> +               work_led: led-0 {
>                         label = "green:work";
>                         gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
>                         default-state = "on";
>                         linux,default-trigger = "heartbeat";
>                 };
>
> -               diy-led {
> +               diy_led: led-1 {
>                         label = "red:diy";
>                         gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
>                         default-state = "off";
> -                       linux,default-trigger = "mmc1";
> +                       linux,default-trigger = "mmc2";
>                 };
>
> -               yellow-led {
> +               yellow_led: led-2 {
>                         label = "yellow:yellow-led";
>                         gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
>                         default-state = "off";
> -                       linux,default-trigger = "mmc0";
> +                       linux,default-trigger = "mmc1";
>                 };
>         };
>
> @@ -110,6 +122,14 @@
>                 regulator-max-microvolt = <5000000>;
>         };
>
> +       sys_12v: sys-12v {
> +               compatible = "regulator-fixed";
> +               regulator-name = "sys_12v";
> +               regulator-always-on;
> +               regulator-boot-on;
> +               vin-supply = <&dc_12v>;
> +       };
> +
>         /* switched by pmic_sleep */
>         vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
>                 compatible = "regulator-fixed";
> @@ -141,7 +161,7 @@
>                 regulator-boot-on;
>                 regulator-min-microvolt = <3300000>;
>                 regulator-max-microvolt = <3300000>;
> -               vin-supply = <&dc_12v>;
> +               vin-supply = <&sys_12v>;
>         };
>
>         vcca_0v9: vcca-0v9 {
> @@ -186,7 +206,7 @@
>                 regulator-boot-on;
>                 regulator-min-microvolt = <5000000>;
>                 regulator-max-microvolt = <5000000>;
> -               vin-supply = <&dc_12v>;
> +               vin-supply = <&sys_12v>;
>         };
>
>         vdd_log: vdd-log {
> @@ -376,6 +396,7 @@
>
>                         vcc_sdio: LDO_REG4 {
>                                 regulator-name = "vcc_sdio";
> +                               regulator-always-on;
>                                 regulator-boot-on;
>                                 regulator-min-microvolt = <1800000>;
>                                 regulator-max-microvolt = <3000000>;
> @@ -456,7 +477,7 @@
>                 reg = <0x40>;
>                 fcs,suspend-voltage-selector = <1>;
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&vsel1_gpio>;
> +               pinctrl-0 = <&vsel1_pin>;
>                 regulator-name = "vdd_cpu_b";
>                 regulator-min-microvolt = <712500>;
>                 regulator-max-microvolt = <1500000>;
> @@ -475,11 +496,13 @@
>                 reg = <0x41>;
>                 fcs,suspend-voltage-selector = <1>;
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&vsel2_gpio>;
> +               pinctrl-0 = <&vsel2_pin>;
>                 regulator-name = "vdd_gpu";
>                 regulator-min-microvolt = <712500>;
>                 regulator-max-microvolt = <1500000>;
>                 regulator-ramp-delay = <1000>;
> +               regulator-always-on;
> +               regulator-boot-on;
>                 vin-supply = <&vcc3v3_sys>;
>
>                 regulator-state-mem {
> @@ -588,6 +611,12 @@
>                 };
>         };
>
> +       ir {
> +               ir_int: ir-int {
> +                       rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
> +               };
> +       };
> +
>         lcd-panel {
>                 lcd_panel_reset: lcd-panel-reset {
>                         rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
> @@ -595,25 +624,25 @@
>         };
>
>         leds {
> -               diy_led_gpio: diy_led-gpio {
> +               diy_led_pin: diy-led-pin {
>                         rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>
> -               work_led_gpio: work_led-gpio {
> +               work_led_pin: work-led-pin {
>                         rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>
> -               yellow_led_gpio: yellow_led-gpio {
> +               yellow_led_pin: yellow-led-pin {
>                         rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>         };
>
>         pmic {
> -               vsel1_gpio: vsel1-gpio {
> +               vsel1_pin: vsel1-pin {
>                         rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
>                 };
>
> -               vsel2_gpio: vsel2-gpio {
> +               vsel2_pin: vsel2-pin {
>                         rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
>                 };
>         };
> diff --git a/arch/arm/dts/rk3399-rock-pi-4.dtsi b/arch/arm/dts/rk3399-rock-pi-4.dtsi
> index 1c55a4645b..b28888ea92 100644
> --- a/arch/arm/dts/rk3399-rock-pi-4.dtsi
> +++ b/arch/arm/dts/rk3399-rock-pi-4.dtsi
> @@ -11,6 +11,11 @@
>  #include "rk3399-opp.dtsi"
>
>  / {
> +       aliases {
> +               mmc0 = &sdmmc;
> +               mmc1 = &sdhci;
> +       };
> +
>         chosen {
>                 stdout-path = "serial2:1500000n8";
>         };
> @@ -111,10 +116,6 @@
>                 regulator-boot-on;
>                 regulator-min-microvolt = <3300000>;
>                 regulator-max-microvolt = <3300000>;
> -
> -               regulator-state-mem {
> -                       regulator-off-in-suspend;
> -               };
>         };
>
>         vdd_log: vdd-log {
> @@ -362,8 +363,6 @@
>                                 regulator-name = "vcc_cam";
>                                 regulator-always-on;
>                                 regulator-boot-on;
> -                               regulator-min-microvolt = <3300000>;
> -                               regulator-max-microvolt = <3300000>;
>                                 regulator-state-mem {
>                                         regulator-off-in-suspend;
>                                 };
> @@ -373,8 +372,6 @@
>                                 regulator-name = "vcc_mipi";
>                                 regulator-always-on;
>                                 regulator-boot-on;
> -                               regulator-min-microvolt = <3300000>;
> -                               regulator-max-microvolt = <3300000>;
>                                 regulator-state-mem {
>                                         regulator-off-in-suspend;
>                                 };
> @@ -387,7 +384,7 @@
>                 reg = <0x40>;
>                 fcs,suspend-voltage-selector = <1>;
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&vsel1_gpio>;
> +               pinctrl-0 = <&vsel1_pin>;
>                 regulator-name = "vdd_cpu_b";
>                 regulator-min-microvolt = <712500>;
>                 regulator-max-microvolt = <1500000>;
> @@ -406,7 +403,7 @@
>                 reg = <0x41>;
>                 fcs,suspend-voltage-selector = <1>;
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&vsel2_gpio>;
> +               pinctrl-0 = <&vsel2_pin>;
>                 regulator-name = "vdd_gpu";
>                 regulator-min-microvolt = <712500>;
>                 regulator-max-microvolt = <1500000>;
> @@ -440,8 +437,9 @@
>  };
>
>  &i2s0 {
> -       rockchip,playback-channels = <8>;
> -       rockchip,capture-channels = <8>;
> +       pinctrl-0 = <&i2s0_2ch_bus>;
> +       rockchip,capture-channels = <2>;
> +       rockchip,playback-channels = <2>;
>         status = "okay";
>  };
>
> @@ -476,7 +474,6 @@
>
>  &pcie0 {
>         ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
> -       max-link-speed = <2>;
>         num-lanes = <4>;
>         pinctrl-0 = <&pcie_clkreqnb_cpm>;
>         pinctrl-names = "default";
> @@ -529,11 +526,11 @@
>                         rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
>                 };
>
> -               vsel1_gpio: vsel1-gpio {
> +               vsel1_pin: vsel1-pin {
>                         rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
>                 };
>
> -               vsel2_gpio: vsel2-gpio {
> +               vsel2_pin: vsel2-pin {
>                         rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
>                 };
>         };
> @@ -680,7 +677,7 @@
>
>  &usbdrd_dwc3_0 {
>         status = "okay";
> -       dr_mode = "otg";
> +       dr_mode = "host";
>  };
>
>  &usbdrd3_1 {
> diff --git a/arch/arm/dts/rk3399-rock-pi-4a.dts b/arch/arm/dts/rk3399-rock-pi-4a.dts
> index d96dd3ebd3..89f2af5e11 100644
> --- a/arch/arm/dts/rk3399-rock-pi-4a.dts
> +++ b/arch/arm/dts/rk3399-rock-pi-4a.dts
> @@ -9,5 +9,5 @@
>
>  / {
>         model = "Radxa ROCK Pi 4A";
> -       compatible = "radxa,rockpi4", "rockchip,rk3399";
> +       compatible = "radxa,rockpi4a", "radxa,rockpi4", "rockchip,rk3399";
>  };
> diff --git a/arch/arm/dts/rk3399-rock-pi-4b.dts b/arch/arm/dts/rk3399-rock-pi-4b.dts
> index 4ca970acac..6c63e61706 100644
> --- a/arch/arm/dts/rk3399-rock-pi-4b.dts
> +++ b/arch/arm/dts/rk3399-rock-pi-4b.dts
> @@ -9,7 +9,11 @@
>
>  / {
>         model = "Radxa ROCK Pi 4B";
> -       compatible = "radxa,rockpi4", "rockchip,rk3399";
> +       compatible = "radxa,rockpi4b", "radxa,rockpi4", "rockchip,rk3399";
> +
> +       aliases {
> +               mmc2 = &sdio0;
> +       };
>  };
>
>  &sdio0 {
> diff --git a/arch/arm/dts/rk3399-rock-pi-4c.dts b/arch/arm/dts/rk3399-rock-pi-4c.dts
> index 9d07ebd1ec..99169bcd51 100644
> --- a/arch/arm/dts/rk3399-rock-pi-4c.dts
> +++ b/arch/arm/dts/rk3399-rock-pi-4c.dts
> @@ -10,7 +10,11 @@
>
>  / {
>         model = "Radxa ROCK Pi 4C";
> -       compatible = "radxa,rockpi4", "rockchip,rk3399";
> +       compatible = "radxa,rockpi4c", "radxa,rockpi4", "rockchip,rk3399";
> +
> +       aliases {
> +               mmc2 = &sdio0;
> +       };
>  };
>
>  &sdio0 {
> diff --git a/arch/arm/dts/rk3399-rock960.dts b/arch/arm/dts/rk3399-rock960.dts
> index 437a75f31a..1a23e8f3cd 100644
> --- a/arch/arm/dts/rk3399-rock960.dts
> +++ b/arch/arm/dts/rk3399-rock960.dts
> @@ -17,42 +17,43 @@
>         leds {
>                 compatible = "gpio-leds";
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,
> -                           <&user_led4>, <&wlan_led>, <&bt_led>;
> +               pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>,
> +                           <&user_led3_pin>, <&user_led4_pin>,
> +                           <&wlan_led_pin>, <&bt_led_pin>;
>
> -               user_led1 {
> +               user_led1: led-1 {
>                         label = "green:user1";
>                         gpios = <&gpio4 RK_PC2 0>;
>                         linux,default-trigger = "heartbeat";
>                 };
>
> -               user_led2 {
> +               user_led2: led-2 {
>                         label = "green:user2";
>                         gpios = <&gpio4 RK_PC6 0>;
>                         linux,default-trigger = "mmc0";
>                 };
>
> -               user_led3 {
> +               user_led3: led-3 {
>                         label = "green:user3";
>                         gpios = <&gpio4 RK_PD0 0>;
>                         linux,default-trigger = "mmc1";
>                 };
>
> -               user_led4 {
> +               user_led4: led-4 {
>                         label = "green:user4";
>                         gpios = <&gpio4 RK_PD4 0>;
>                         panic-indicator;
>                         linux,default-trigger = "none";
>                 };
>
> -               wlan_active_led {
> +               wlan_active_led: led-5 {
>                         label = "yellow:wlan";
>                         gpios = <&gpio4 RK_PD5 0>;
>                         linux,default-trigger = "phy0tx";
>                         default-state = "off";
>                 };
>
> -               bt_active_led {
> +               bt_active_led: led-6 {
>                         label = "blue:bt";
>                         gpios = <&gpio4 RK_PD6 0>;
>                         linux,default-trigger = "hci0-power";
> @@ -62,38 +63,52 @@
>
>  };
>
> +&cpu_alert0 {
> +       temperature = <65000>;
> +};
> +
> +&cpu_thermal {
> +       sustainable-power = <1550>;
> +
> +       cooling-maps {
> +               map0 {
> +                       trip = <&cpu_alert1>;
> +               };
> +       };
> +};
> +
>  &pcie0 {
>         ep-gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
>  };
>
>  &pinctrl {
>         leds {
> -               user_led1: user_led1 {
> +               user_led1_pin: user-led1-pin {
>                         rockchip,pins =
>                                 <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>
> -               user_led2: user_led2 {
> +               user_led2_pin: user-led2-pin {
>                         rockchip,pins =
>                                 <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>
> -               user_led3: user_led3 {
> +               user_led3_pin: user-led3-pin {
>                         rockchip,pins =
>                                 <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>
> -               user_led4: user_led4 {
> +               user_led4_pin: user-led4-pin {
>                         rockchip,pins =
>                                 <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>
> -               wlan_led: wlan_led {
> +               wlan_led_pin: wlan-led-pin {
>                         rockchip,pins =
>                                 <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>
> -               bt_led: bt_led {
> +               bt_led_pin: bt-led-pin {
>                         rockchip,pins =
>                                 <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
> @@ -124,45 +139,6 @@
>         status = "okay";
>  };
>
> -&thermal_zones {
> -       cpu_thermal: cpu {
> -               polling-delay-passive = <100>;
> -               polling-delay = <1000>;
> -               thermal-sensors = <&tsadc 0>;
> -               sustainable-power = <1550>;
> -
> -               trips {
> -                       cpu_alert0: cpu_alert0 {
> -                                   temperature = <65000>;
> -                                   hysteresis = <2000>;
> -                                   type = "passive";
> -                       };
> -
> -                       cpu_alert1: cpu_alert1 {
> -                                   temperature = <75000>;
> -                                   hysteresis = <2000>;
> -                                   type = "passive";
> -                       };
> -
> -                       cpu_crit: cpu_crit {
> -                                 temperature = <95000>;
> -                                 hysteresis = <2000>;
> -                                 type = "critical";
> -                       };
> -               };
> -
> -               cooling-maps {
> -                            map0 {
> -
> -                            trip = <&cpu_alert1>;
> -                            cooling-device =
> -                                       <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> -                                       <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> -                       };
> -               };
> -       };
> -};
> -
>  &usbdrd_dwc3_0 {
>         dr_mode = "otg";
>  };
> diff --git a/arch/arm/dts/rk3399-rock960.dtsi b/arch/arm/dts/rk3399-rock960.dtsi
> index ba7c75c9f2..25dc61c26a 100644
> --- a/arch/arm/dts/rk3399-rock960.dtsi
> +++ b/arch/arm/dts/rk3399-rock960.dtsi
> @@ -9,6 +9,12 @@
>  #include "rk3399-opp.dtsi"
>
>  / {
> +       aliases {
> +               mmc0 = &sdio0;
> +               mmc1 = &sdmmc;
> +               mmc2 = &sdhci;
> +       };
> +
>         sdio_pwrseq: sdio-pwrseq {
>                 compatible = "mmc-pwrseq-simple";
>                 clocks = <&rk808 1>;
> @@ -470,12 +476,12 @@
>                                 <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
>                 };
>
> -               vsel1_gpio: vsel1-gpio {
> +               vsel1_pin: vsel1-pin {
>                         rockchip,pins =
>                                 <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
>                 };
>
> -               vsel2_gpio: vsel2-gpio {
> +               vsel2_pin: vsel2-pin {
>                         rockchip,pins =
>                                 <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
>                 };
> diff --git a/arch/arm/dts/rk3399-rockpro64.dtsi b/arch/arm/dts/rk3399-rockpro64.dtsi
> index 9bca258012..6bff8db7d3 100644
> --- a/arch/arm/dts/rk3399-rockpro64.dtsi
> +++ b/arch/arm/dts/rk3399-rockpro64.dtsi
> @@ -10,6 +10,12 @@
>  #include "rk3399-opp.dtsi"
>
>  / {
> +       aliases {
> +               mmc0 = &sdio0;
> +               mmc1 = &sdmmc;
> +               mmc2 = &sdhci;
> +       };
> +
>         chosen {
>                 stdout-path = "serial2:1500000n8";
>         };
> @@ -36,18 +42,25 @@
>                 };
>         };
>
> +       ir-receiver {
> +               compatible = "gpio-ir-receiver";
> +               gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
> +               pinctrl-0 = <&ir_int>;
> +               pinctrl-names = "default";
> +       };
> +
>         leds {
>                 compatible = "gpio-leds";
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
> +               pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
>
> -               work-led {
> +               work_led: led-0 {
>                         label = "work";
>                         default-state = "on";
>                         gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
>                 };
>
> -               diy-led {
> +               diy_led: led-1 {
>                         label = "diy";
>                         default-state = "off";
>                         gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
> @@ -72,10 +85,27 @@
>
>         sound {
>                 compatible = "audio-graph-card";
> -               label = "rockchip,rk3399";
> +               label = "Analog";
>                 dais = <&i2s1_p0>;
>         };
>
> +       sound-dit {
> +               compatible = "audio-graph-card";
> +               label = "SPDIF";
> +               dais = <&spdif_p0>;
> +       };
> +
> +       spdif-dit {
> +               compatible = "linux,spdif-dit";
> +               #sound-dai-cells = <0>;
> +
> +               port {
> +                       dit_p0_0: endpoint {
> +                               remote-endpoint = <&spdif_p0_0>;
> +                       };
> +               };
> +       };
> +
>         vcc12v_dcin: vcc12v-dcin {
>                 compatible = "regulator-fixed";
>                 regulator-name = "vcc12v_dcin";
> @@ -96,6 +126,24 @@
>                 vin-supply = <&vcc_1v8>;
>         };
>
> +       /* micro SD card power */
> +       vcc3v0_sd: vcc3v0-sd {
> +               compatible = "regulator-fixed";
> +               enable-active-high;
> +               gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&sdmmc0_pwr_h>;
> +               regulator-name = "vcc3v0_sd";
> +               regulator-always-on;
> +               regulator-min-microvolt = <3000000>;
> +               regulator-max-microvolt = <3000000>;
> +               vin-supply = <&vcc3v3_sys>;
> +
> +               regulator-state-mem {
> +                       regulator-off-in-suspend;
> +               };
> +       };
> +
>         vcc3v3_pcie: vcc3v3-pcie-regulator {
>                 compatible = "regulator-fixed";
>                 enable-active-high;
> @@ -427,7 +475,7 @@
>                 reg = <0x40>;
>                 fcs,suspend-voltage-selector = <1>;
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&vsel1_gpio>;
> +               pinctrl-0 = <&vsel1_pin>;
>                 regulator-name = "vdd_cpu_b";
>                 regulator-min-microvolt = <712500>;
>                 regulator-max-microvolt = <1500000>;
> @@ -446,7 +494,7 @@
>                 reg = <0x41>;
>                 fcs,suspend-voltage-selector = <1>;
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&vsel2_gpio>;
> +               pinctrl-0 = <&vsel2_pin>;
>                 regulator-name = "vdd_gpu";
>                 regulator-min-microvolt = <712500>;
>                 regulator-max-microvolt = <1500000>;
> @@ -569,12 +617,18 @@
>                 };
>         };
>
> +       ir {
> +               ir_int: ir-int {
> +                       rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
> +               };
> +       };
> +
>         leds {
> -               work_led_gpio: work_led-gpio {
> +               work_led_pin: work-led-pin {
>                         rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>
> -               diy_led_gpio: diy_led-gpio {
> +               diy_led_pin: diy-led-pin {
>                         rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
>                 };
>         };
> @@ -594,15 +648,22 @@
>                         rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
>                 };
>
> -               vsel1_gpio: vsel1-gpio {
> +               vsel1_pin: vsel1-pin {
>                         rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
>                 };
>
> -               vsel2_gpio: vsel2-gpio {
> +               vsel2_pin: vsel2-pin {
>                         rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
>                 };
>         };
>
> +       sdcard {
> +               sdmmc0_pwr_h: sdmmc0-pwr-h {
> +                       rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
> +               };
> +
> +       };
> +
>         sdio-pwrseq {
>                 wifi_enable_h: wifi-enable-h {
>                         rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> @@ -661,6 +722,8 @@
>         max-frequency = <150000000>;
>         pinctrl-names = "default";
>         pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
> +       vmmc-supply = <&vcc3v0_sd>;
> +       vqmmc-supply = <&vcc_sdio>;
>         status = "okay";
>  };
>
> @@ -671,6 +734,16 @@
>         status = "okay";
>  };
>
> +&spdif {
> +       pinctrl-0 = <&spdif_bus_1>;
> +
> +       spdif_p0: port {
> +               spdif_p0_0: endpoint {
> +                       remote-endpoint = <&dit_p0_0>;
> +               };
> +       };
> +};
> +
>  &spi1 {
>         status = "okay";
>
> @@ -768,7 +841,7 @@
>
>  &usbdrd_dwc3_0 {
>         status = "okay";
> -       dr_mode = "otg";
> +       dr_mode = "host";
>  };
>
>  &usbdrd3_1 {
> diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi
> index 74f2c3d490..3871c7fd83 100644
> --- a/arch/arm/dts/rk3399.dtsi
> +++ b/arch/arm/dts/rk3399.dtsi
> @@ -197,38 +197,12 @@
>                 #clock-cells = <0>;
>         };
>
> -       amba: bus {
> -               compatible = "simple-bus";
> -               #address-cells = <2>;
> -               #size-cells = <2>;
> -               ranges;
> -
> -               dmac_bus: dma-controller at ff6d0000 {
> -                       compatible = "arm,pl330", "arm,primecell";
> -                       reg = <0x0 0xff6d0000 0x0 0x4000>;
> -                       interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
> -                                    <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
> -                       #dma-cells = <1>;
> -                       clocks = <&cru ACLK_DMAC0_PERILP>;
> -                       clock-names = "apb_pclk";
> -               };
> -
> -               dmac_peri: dma-controller at ff6e0000 {
> -                       compatible = "arm,pl330", "arm,primecell";
> -                       reg = <0x0 0xff6e0000 0x0 0x4000>;
> -                       interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>,
> -                                    <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>;
> -                       #dma-cells = <1>;
> -                       clocks = <&cru ACLK_DMAC1_PERILP>;
> -                       clock-names = "apb_pclk";
> -               };
> -       };
> -
>         pcie0: pcie at f8000000 {
>                 compatible = "rockchip,rk3399-pcie";
>                 reg = <0x0 0xf8000000 0x0 0x2000000>,
>                       <0x0 0xfd000000 0x0 0x1000000>;
>                 reg-names = "axi-base", "apb-base";
> +               device_type = "pci";
>                 #address-cells = <3>;
>                 #size-cells = <2>;
>                 #interrupt-cells = <1>;
> @@ -247,15 +221,14 @@
>                                 <0 0 0 2 &pcie0_intc 1>,
>                                 <0 0 0 3 &pcie0_intc 2>,
>                                 <0 0 0 4 &pcie0_intc 3>;
> -               linux,pci-domain = <0>;
>                 max-link-speed = <1>;
>                 msi-map = <0x0 &its 0x0 0x1000>;
>                 phys = <&pcie_phy 0>, <&pcie_phy 1>,
>                        <&pcie_phy 2>, <&pcie_phy 3>;
>                 phy-names = "pcie-phy-0", "pcie-phy-1",
>                             "pcie-phy-2", "pcie-phy-3";
> -               ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000
> -                         0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
> +               ranges = <0x82000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>,
> +                        <0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
>                 resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
>                          <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
>                          <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
> @@ -326,7 +299,7 @@
>                 status = "disabled";
>         };
>
> -       sdhci: sdhci at fe330000 {
> +       sdhci: mmc at fe330000 {
>                 compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
>                 reg = <0x0 0xfe330000 0x0 0x10000>;
>                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
> @@ -403,7 +376,7 @@
>                 reset-names = "usb3-otg";
>                 status = "disabled";
>
> -               usbdrd_dwc3_0: dwc3 {
> +               usbdrd_dwc3_0: usb at fe800000 {
>                         compatible = "snps,dwc3";
>                         reg = <0x0 0xfe800000 0x0 0x100000>;
>                         interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
> @@ -439,7 +412,7 @@
>                 reset-names = "usb3-otg";
>                 status = "disabled";
>
> -               usbdrd_dwc3_1: dwc3 {
> +               usbdrd_dwc3_1: usb at fe900000 {
>                         compatible = "snps,dwc3";
>                         reg = <0x0 0xfe900000 0x0 0x100000>;
>                         interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
> @@ -759,7 +732,7 @@
>         };
>
>         thermal_zones: thermal-zones {
> -               cpu_thermal: cpu {
> +               cpu_thermal: cpu-thermal {
>                         polling-delay-passive = <100>;
>                         polling-delay = <1000>;
>
> @@ -803,7 +776,7 @@
>                         };
>                 };
>
> -               gpu_thermal: gpu {
> +               gpu_thermal: gpu-thermal {
>                         polling-delay-passive = <100>;
>                         polling-delay = <1000>;
>
> @@ -845,135 +818,135 @@
>                 rockchip,grf = <&grf>;
>                 rockchip,hw-tshut-temp = <95000>;
>                 pinctrl-names = "init", "default", "sleep";
> -               pinctrl-0 = <&otp_gpio>;
> +               pinctrl-0 = <&otp_pin>;
>                 pinctrl-1 = <&otp_out>;
> -               pinctrl-2 = <&otp_gpio>;
> +               pinctrl-2 = <&otp_pin>;
>                 #thermal-sensor-cells = <1>;
>                 status = "disabled";
>         };
>
>         qos_emmc: qos at ffa58000 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffa58000 0x0 0x20>;
>         };
>
>         qos_gmac: qos at ffa5c000 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffa5c000 0x0 0x20>;
>         };
>
>         qos_pcie: qos at ffa60080 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffa60080 0x0 0x20>;
>         };
>
>         qos_usb_host0: qos at ffa60100 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffa60100 0x0 0x20>;
>         };
>
>         qos_usb_host1: qos at ffa60180 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffa60180 0x0 0x20>;
>         };
>
>         qos_usb_otg0: qos at ffa70000 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffa70000 0x0 0x20>;
>         };
>
>         qos_usb_otg1: qos at ffa70080 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffa70080 0x0 0x20>;
>         };
>
>         qos_sd: qos at ffa74000 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffa74000 0x0 0x20>;
>         };
>
>         qos_sdioaudio: qos at ffa76000 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffa76000 0x0 0x20>;
>         };
>
>         qos_hdcp: qos at ffa90000 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffa90000 0x0 0x20>;
>         };
>
>         qos_iep: qos at ffa98000 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffa98000 0x0 0x20>;
>         };
>
>         qos_isp0_m0: qos at ffaa0000 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffaa0000 0x0 0x20>;
>         };
>
>         qos_isp0_m1: qos at ffaa0080 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffaa0080 0x0 0x20>;
>         };
>
>         qos_isp1_m0: qos at ffaa8000 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffaa8000 0x0 0x20>;
>         };
>
>         qos_isp1_m1: qos at ffaa8080 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffaa8080 0x0 0x20>;
>         };
>
>         qos_rga_r: qos at ffab0000 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffab0000 0x0 0x20>;
>         };
>
>         qos_rga_w: qos at ffab0080 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffab0080 0x0 0x20>;
>         };
>
>         qos_video_m0: qos at ffab8000 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffab8000 0x0 0x20>;
>         };
>
>         qos_video_m1_r: qos at ffac0000 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffac0000 0x0 0x20>;
>         };
>
>         qos_video_m1_w: qos at ffac0080 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffac0080 0x0 0x20>;
>         };
>
>         qos_vop_big_r: qos at ffac8000 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffac8000 0x0 0x20>;
>         };
>
>         qos_vop_big_w: qos at ffac8080 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffac8080 0x0 0x20>;
>         };
>
>         qos_vop_little: qos at ffad0000 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffad0000 0x0 0x20>;
>         };
>
>         qos_perihp: qos at ffad8080 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffad8080 0x0 0x20>;
>         };
>
>         qos_gpu: qos at ffae0000 {
> -               compatible = "syscon";
> +               compatible = "rockchip,rk3399-qos", "syscon";
>                 reg = <0x0 0xffae0000 0x0 0x20>;
>         };
>
> @@ -995,126 +968,146 @@
>                         #size-cells = <0>;
>
>                         /* These power domains are grouped by VD_CENTER */
> -                       pd_iep at RK3399_PD_IEP {
> +                       power-domain at RK3399_PD_IEP {
>                                 reg = <RK3399_PD_IEP>;
>                                 clocks = <&cru ACLK_IEP>,
>                                          <&cru HCLK_IEP>;
>                                 pm_qos = <&qos_iep>;
> +                               #power-domain-cells = <0>;
>                         };
> -                       pd_rga at RK3399_PD_RGA {
> +                       power-domain at RK3399_PD_RGA {
>                                 reg = <RK3399_PD_RGA>;
>                                 clocks = <&cru ACLK_RGA>,
>                                          <&cru HCLK_RGA>;
>                                 pm_qos = <&qos_rga_r>,
>                                          <&qos_rga_w>;
> +                               #power-domain-cells = <0>;
>                         };
> -                       pd_vcodec at RK3399_PD_VCODEC {
> +                       power-domain at RK3399_PD_VCODEC {
>                                 reg = <RK3399_PD_VCODEC>;
>                                 clocks = <&cru ACLK_VCODEC>,
>                                          <&cru HCLK_VCODEC>;
>                                 pm_qos = <&qos_video_m0>;
> +                               #power-domain-cells = <0>;
>                         };
> -                       pd_vdu at RK3399_PD_VDU {
> +                       power-domain at RK3399_PD_VDU {
>                                 reg = <RK3399_PD_VDU>;
>                                 clocks = <&cru ACLK_VDU>,
>                                          <&cru HCLK_VDU>;
>                                 pm_qos = <&qos_video_m1_r>,
>                                          <&qos_video_m1_w>;
> +                               #power-domain-cells = <0>;
>                         };
>
>                         /* These power domains are grouped by VD_GPU */
> -                       pd_gpu at RK3399_PD_GPU {
> +                       power-domain at RK3399_PD_GPU {
>                                 reg = <RK3399_PD_GPU>;
>                                 clocks = <&cru ACLK_GPU>;
>                                 pm_qos = <&qos_gpu>;
> +                               #power-domain-cells = <0>;
>                         };
>
>                         /* These power domains are grouped by VD_LOGIC */
> -                       pd_edp at RK3399_PD_EDP {
> +                       power-domain at RK3399_PD_EDP {
>                                 reg = <RK3399_PD_EDP>;
>                                 clocks = <&cru PCLK_EDP_CTRL>;
> +                               #power-domain-cells = <0>;
>                         };
> -                       pd_emmc at RK3399_PD_EMMC {
> +                       power-domain at RK3399_PD_EMMC {
>                                 reg = <RK3399_PD_EMMC>;
>                                 clocks = <&cru ACLK_EMMC>;
>                                 pm_qos = <&qos_emmc>;
> +                               #power-domain-cells = <0>;
>                         };
> -                       pd_gmac at RK3399_PD_GMAC {
> +                       power-domain at RK3399_PD_GMAC {
>                                 reg = <RK3399_PD_GMAC>;
>                                 clocks = <&cru ACLK_GMAC>,
>                                          <&cru PCLK_GMAC>;
>                                 pm_qos = <&qos_gmac>;
> +                               #power-domain-cells = <0>;
>                         };
> -                       pd_sd at RK3399_PD_SD {
> +                       power-domain at RK3399_PD_SD {
>                                 reg = <RK3399_PD_SD>;
>                                 clocks = <&cru HCLK_SDMMC>,
>                                          <&cru SCLK_SDMMC>;
>                                 pm_qos = <&qos_sd>;
> +                               #power-domain-cells = <0>;
>                         };
> -                       pd_sdioaudio at RK3399_PD_SDIOAUDIO {
> +                       power-domain at RK3399_PD_SDIOAUDIO {
>                                 reg = <RK3399_PD_SDIOAUDIO>;
>                                 clocks = <&cru HCLK_SDIO>;
>                                 pm_qos = <&qos_sdioaudio>;
> +                               #power-domain-cells = <0>;
> +                       };
> +                       power-domain at RK3399_PD_TCPD0 {
> +                               reg = <RK3399_PD_TCPD0>;
> +                               clocks = <&cru SCLK_UPHY0_TCPDCORE>,
> +                                        <&cru SCLK_UPHY0_TCPDPHY_REF>;
> +                               #power-domain-cells = <0>;
> +                       };
> +                       power-domain at RK3399_PD_TCPD1 {
> +                               reg = <RK3399_PD_TCPD1>;
> +                               clocks = <&cru SCLK_UPHY1_TCPDCORE>,
> +                                        <&cru SCLK_UPHY1_TCPDPHY_REF>;
> +                               #power-domain-cells = <0>;
>                         };
> -                       pd_usb3 at RK3399_PD_USB3 {
> +                       power-domain at RK3399_PD_USB3 {
>                                 reg = <RK3399_PD_USB3>;
>                                 clocks = <&cru ACLK_USB3>;
>                                 pm_qos = <&qos_usb_otg0>,
>                                          <&qos_usb_otg1>;
> +                               #power-domain-cells = <0>;
>                         };
> -                       pd_vio at RK3399_PD_VIO {
> +                       power-domain at RK3399_PD_VIO {
>                                 reg = <RK3399_PD_VIO>;
> +                               #power-domain-cells = <1>;
>                                 #address-cells = <1>;
>                                 #size-cells = <0>;
>
> -                               pd_hdcp at RK3399_PD_HDCP {
> +                               power-domain at RK3399_PD_HDCP {
>                                         reg = <RK3399_PD_HDCP>;
>                                         clocks = <&cru ACLK_HDCP>,
>                                                  <&cru HCLK_HDCP>,
>                                                  <&cru PCLK_HDCP>;
>                                         pm_qos = <&qos_hdcp>;
> +                                       #power-domain-cells = <0>;
>                                 };
> -                               pd_isp0 at RK3399_PD_ISP0 {
> +                               power-domain at RK3399_PD_ISP0 {
>                                         reg = <RK3399_PD_ISP0>;
>                                         clocks = <&cru ACLK_ISP0>,
>                                                  <&cru HCLK_ISP0>;
>                                         pm_qos = <&qos_isp0_m0>,
>                                                  <&qos_isp0_m1>;
> +                                       #power-domain-cells = <0>;
>                                 };
> -                               pd_isp1 at RK3399_PD_ISP1 {
> +                               power-domain at RK3399_PD_ISP1 {
>                                         reg = <RK3399_PD_ISP1>;
>                                         clocks = <&cru ACLK_ISP1>,
>                                                  <&cru HCLK_ISP1>;
>                                         pm_qos = <&qos_isp1_m0>,
>                                                  <&qos_isp1_m1>;
> +                                       #power-domain-cells = <0>;
>                                 };
> -                               pd_tcpc0 at RK3399_PD_TCPC0 {
> -                                       reg = <RK3399_PD_TCPD0>;
> -                                       clocks = <&cru SCLK_UPHY0_TCPDCORE>,
> -                                                <&cru SCLK_UPHY0_TCPDPHY_REF>;
> -                               };
> -                               pd_tcpc1 at RK3399_PD_TCPC1 {
> -                                       reg = <RK3399_PD_TCPD1>;
> -                                       clocks = <&cru SCLK_UPHY1_TCPDCORE>,
> -                                                <&cru SCLK_UPHY1_TCPDPHY_REF>;
> -                               };
> -                               pd_vo at RK3399_PD_VO {
> +                               power-domain at RK3399_PD_VO {
>                                         reg = <RK3399_PD_VO>;
> +                                       #power-domain-cells = <1>;
>                                         #address-cells = <1>;
>                                         #size-cells = <0>;
>
> -                                       pd_vopb at RK3399_PD_VOPB {
> +                                       power-domain at RK3399_PD_VOPB {
>                                                 reg = <RK3399_PD_VOPB>;
>                                                 clocks = <&cru ACLK_VOP0>,
>                                                          <&cru HCLK_VOP0>;
>                                                 pm_qos = <&qos_vop_big_r>,
>                                                          <&qos_vop_big_w>;
> +                                               #power-domain-cells = <0>;
>                                         };
> -                                       pd_vopl at RK3399_PD_VOPL {
> +                                       power-domain at RK3399_PD_VOPL {
>                                                 reg = <RK3399_PD_VOPL>;
>                                                 clocks = <&cru ACLK_VOP1>,
>                                                          <&cru HCLK_VOP1>;
>                                                 pm_qos = <&qos_vop_little>;
> +                                               #power-domain-cells = <0>;
>                                         };
>                                 };
>                         };
> @@ -1124,8 +1117,6 @@
>         pmugrf: syscon at ff320000 {
>                 compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
>                 reg = <0x0 0xff320000 0x0 0x1000>;
> -               #address-cells = <1>;
> -               #size-cells = <1>;
>
>                 pmu_io_domains: io-domains {
>                         compatible = "rockchip,rk3399-pmu-io-voltage-domain";
> @@ -1211,7 +1202,6 @@
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pwm0_pin>;
>                 clocks = <&pmucru PCLK_RKPWM_PMU>;
> -               clock-names = "pwm";
>                 status = "disabled";
>         };
>
> @@ -1222,7 +1212,6 @@
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pwm1_pin>;
>                 clocks = <&pmucru PCLK_RKPWM_PMU>;
> -               clock-names = "pwm";
>                 status = "disabled";
>         };
>
> @@ -1233,7 +1222,6 @@
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pwm2_pin>;
>                 clocks = <&pmucru PCLK_RKPWM_PMU>;
> -               clock-names = "pwm";
>                 status = "disabled";
>         };
>
> @@ -1244,7 +1232,6 @@
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pwm3a_pin>;
>                 clocks = <&pmucru PCLK_RKPWM_PMU>;
> -               clock-names = "pwm";
>                 status = "disabled";
>         };
>
> @@ -1271,6 +1258,17 @@
>                 power-domains = <&power RK3399_PD_VCODEC>;
>         };
>
> +       vdec: video-codec at ff660000 {
> +               compatible = "rockchip,rk3399-vdec";
> +               reg = <0x0 0xff660000 0x0 0x400>;
> +               interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
> +               clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
> +                        <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
> +               clock-names = "axi", "ahb", "cabac", "core";
> +               iommus = <&vdec_mmu>;
> +               power-domains = <&power RK3399_PD_VDU>;
> +       };
> +
>         vdec_mmu: iommu at ff660480 {
>                 compatible = "rockchip,iommu";
>                 reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>;
> @@ -1278,8 +1276,8 @@
>                 interrupt-names = "vdec_mmu";
>                 clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>;
>                 clock-names = "aclk", "iface";
> +               power-domains = <&power RK3399_PD_VDU>;
>                 #iommu-cells = <0>;
> -               status = "disabled";
>         };
>
>         iep_mmu: iommu at ff670800 {
> @@ -1336,6 +1334,28 @@
>                 };
>         };
>
> +       dmac_bus: dma-controller at ff6d0000 {
> +               compatible = "arm,pl330", "arm,primecell";
> +               reg = <0x0 0xff6d0000 0x0 0x4000>;
> +               interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
> +               #dma-cells = <1>;
> +               arm,pl330-periph-burst;
> +               clocks = <&cru ACLK_DMAC0_PERILP>;
> +               clock-names = "apb_pclk";
> +       };
> +
> +       dmac_peri: dma-controller at ff6e0000 {
> +               compatible = "arm,pl330", "arm,primecell";
> +               reg = <0x0 0xff6e0000 0x0 0x4000>;
> +               interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>;
> +               #dma-cells = <1>;
> +               arm,pl330-periph-burst;
> +               clocks = <&cru ACLK_DMAC1_PERILP>;
> +               clock-names = "apb_pclk";
> +       };
> +
>         pmucru: pmu-clock-controller at ff750000 {
>                 compatible = "rockchip,rk3399-pmucru";
>                 reg = <0x0 0xff750000 0x0 0x1000>;
> @@ -1387,7 +1407,18 @@
>                         status = "disabled";
>                 };
>
> -               u2phy0: usb2-phy at e450 {
> +               mipi_dphy_rx0: mipi-dphy-rx0 {
> +                       compatible = "rockchip,rk3399-mipi-dphy-rx0";
> +                       clocks = <&cru SCLK_MIPIDPHY_REF>,
> +                                <&cru SCLK_DPHY_RX0_CFG>,
> +                                <&cru PCLK_VIO_GRF>;
> +                       clock-names = "dphy-ref", "dphy-cfg", "grf";
> +                       power-domains = <&power RK3399_PD_VIO>;
> +                       #phy-cells = <0>;
> +                       status = "disabled";
> +               };
> +
> +               u2phy0: usb2phy at e450 {
>                         compatible = "rockchip,rk3399-usb2phy";
>                         reg = <0xe450 0x10>;
>                         clocks = <&cru SCLK_USB2PHY0_REF>;
> @@ -1414,7 +1445,7 @@
>                         };
>                 };
>
> -               u2phy1: usb2-phy at e460 {
> +               u2phy1: usb2phy at e460 {
>                         compatible = "rockchip,rk3399-usb2phy";
>                         reg = <0xe460 0x10>;
>                         clocks = <&cru SCLK_USB2PHY1_REF>;
> @@ -1513,7 +1544,7 @@
>         };
>
>         watchdog at ff848000 {
> -               compatible = "snps,dw-wdt";
> +               compatible = "rockchip,rk3399-wdt", "snps,dw-wdt";
>                 reg = <0x0 0xff848000 0x0 0x100>;
>                 clocks = <&cru PCLK_WDT>;
>                 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>;
> @@ -1700,6 +1731,32 @@
>                 status = "disabled";
>         };
>
> +       isp0: isp0 at ff910000 {
> +               compatible = "rockchip,rk3399-cif-isp";
> +               reg = <0x0 0xff910000 0x0 0x4000>;
> +               interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
> +               clocks = <&cru SCLK_ISP0>,
> +                        <&cru ACLK_ISP0_WRAPPER>,
> +                        <&cru HCLK_ISP0_WRAPPER>;
> +               clock-names = "isp", "aclk", "hclk";
> +               iommus = <&isp0_mmu>;
> +               phys = <&mipi_dphy_rx0>;
> +               phy-names = "dphy";
> +               power-domains = <&power RK3399_PD_ISP0>;
> +               status = "disabled";
> +
> +               ports {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       port at 0 {
> +                               reg = <0>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                       };
> +               };
> +       };
> +
>         isp0_mmu: iommu at ff914000 {
>                 compatible = "rockchip,iommu";
>                 reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
> @@ -1883,10 +1940,10 @@
>         gpu: gpu at ff9a0000 {
>                 compatible = "rockchip,rk3399-mali", "arm,mali-t860";
>                 reg = <0x0 0xff9a0000 0x0 0x10000>;
> -               interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
> -                            <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
> -                            <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>;
> -               interrupt-names = "gpu", "job", "mmu";
> +               interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
> +               interrupt-names = "job", "mmu", "gpu";
>                 clocks = <&cru ACLK_GPU>;
>                 #cooling-cells = <2>;
>                 power-domains = <&power RK3399_PD_GPU>;
> @@ -2317,7 +2374,7 @@
>                         };
>                 };
>
> -               sleep {
> +               suspend {
>                         ap_pwroff: ap-pwroff {
>                                 rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>;
>                         };
> @@ -2475,7 +2532,7 @@
>                 };
>
>                 tsadc {
> -                       otp_gpio: otp-gpio {
> +                       otp_pin: otp-pin {
>                                 rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
>                         };
>
> diff --git a/arch/arm/dts/rk3399pro-vmarc-som.dtsi b/arch/arm/dts/rk3399pro-vmarc-som.dtsi
> index 5d087be04a..01d1a75c8b 100644
> --- a/arch/arm/dts/rk3399pro-vmarc-som.dtsi
> +++ b/arch/arm/dts/rk3399pro-vmarc-som.dtsi
> @@ -12,6 +12,11 @@
>  / {
>         compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
>
> +       aliases {
> +               mmc0 = &sdmmc;
> +               mmc1 = &sdhci;
> +       };
> +
>         vcc3v3_pcie: vcc-pcie-regulator {
>                 compatible = "regulator-fixed";
>                 enable-active-high;
> @@ -324,7 +329,6 @@
>
>  &pcie0 {
>         ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
> -       max-link-speed = <2>;
>         num-lanes = <4>;
>         pinctrl-0 = <&pcie_clkreqnb_cpm>;
>         pinctrl-names = "default";
> @@ -353,6 +357,12 @@
>                 };
>         };
>
> +       sdio-pwrseq {
> +               wifi_enable_h: wifi-enable-h {
> +                       rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
> +               };
> +       };
> +
>         vbus_host {
>                 usb1_en_oc: usb1-en-oc {
>                         rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
> @@ -371,6 +381,16 @@
>         pmu1830-supply = <&vcc_1v8>;
>  };
>
> +&sdio_pwrseq {
> +       /*
> +        * On the module itself this is one of these (depending
> +        * on the actual card populated):
> +        * - SDIO_RESET_L_WL_REG_ON
> +        * - PDN (power down when low)
> +        */
> +       reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
> +};
> +
>  &sdhci {
>         bus-width = <8>;
>         mmc-hs400-1_8v;
> diff --git a/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
> index 26b53eac47..da1d548b73 100644
> --- a/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
> +++ b/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
> @@ -15,6 +15,14 @@
>                 #clock-cells = <0>;
>         };
>
> +       sdio_pwrseq: sdio-pwrseq {
> +               compatible = "mmc-pwrseq-simple";
> +               clocks = <&hym8563>;
> +               clock-names = "ext_clock";
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&wifi_enable_h>;
> +       };
> +
>         vcc12v_dcin: vcc12v-dcin-regulator {
>                 compatible = "regulator-fixed";
>                 regulator-name = "vcc12v_dcin";
> @@ -78,6 +86,19 @@
>         status = "okay";
>  };
>
> +&sdio0 {
> +       bus-width = <4>;
> +       cap-sd-highspeed;
> +       cap-sdio-irq;
> +       keep-power-in-suspend;
> +       mmc-pwrseq = <&sdio_pwrseq>;
> +       non-removable;
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
> +       sd-uhs-sdr104;
> +       status = "okay";
> +};
> +
>  &sdmmc {
>         bus-width = <4>;
>         cap-mmc-highspeed;
> --
> 2.31.1
>


More information about the U-Boot mailing list