[PATCH 1/2] imx8mm-cl-iot-gate: Do not build fip.bin by default

[Paul Liu]

Hi Fabio,

I got several boards. With all different PN. But all of them are 2GB
memory. And the recent master doesn't boot on one of my board. I haven't
tried all of the combinations.
After bisect, I found commit e27bddff breaks the boot. It just hang there.

But if I change PHYS_SDRAM_SIZE to 1GB then it can boot. However this is
not the solution because it limits the memory usage. So I might need to
take some time look into what happened and spend more time to test on other
PN. Before start testing your patches.
And because you can boot the master branch fine so I'm not sure what
happened on my side.

Yours,
Paul



On Wed, 18 Aug 2021 at 20:24, Fabio Estevam <festevam at gmail.com> wrote:

> Hi Paul,
>
> On Tue, Aug 17, 2021 at 9:09 PM Paul Liu <paul.liu at linaro.org> wrote:
> >
> > Hi Fabio,
> >
> > Can I know your Compulab's hardware PN?
> > Something like "IOTG-IMX8-D2-NA16-WB-FATPM".
>
> I only have remote access to the board, so I can't tell you the part
> number at the moment.
>
> Anything in particular that you are concerned about?
>
> Thanks,
>
> Fabio Estevam
>