[PATCH 1/2] imx8mm-cl-iot-gate: Do not build fip.bin by default

[Fabio Estevam]

Hi Paul,

On Wed, Aug 18, 2021 at 6:32 PM Paul Liu <paul.liu at linaro.org> wrote:
>
> Hi Fabio,
>
> I got several boards. With all different PN. But all of them are 2GB memory. And the recent master doesn't boot on one of my board. I haven't tried all of the combinations.

With the U-Boot from Compulab, it reports 4GB. With mainline U-Boot it
reports 2GB, so yes, there is an issue indeed.

However, I don't see a hang.

> After bisect, I found commit e27bddff breaks the boot. It just hang there.

Adding Frieder as the author of the patch.

> But if I change PHYS_SDRAM_SIZE to 1GB then it can boot. However this is not the solution because it limits the memory usage. So I might need to take some time look into what happened and spend more time to test on other PN. Before start testing your patches.
> And because you can boot the master branch fine so I'm not sure what happened on my side.

Yes, please fix the memory issue first. Thanks!