[PATCH v3 00/10] board: toradex: verdin-imx8mm: target refresh

[Marcel Ziswiler]

From: Marcel Ziswiler <marcel.ziswiler at toradex.com>


An assortment of fixes and improvements like an Ethernet PHY
configuration fix, DEK blob encapsulation preparation, migration to
using binman to pack images, SLEEP_MOCI# enablement, dropping of V1.0
hardware support [1], renaming kernel image variable, using preboot
for fdtfile evaluation and watchdog pinctrl fix.

Note that this series is applied on top of Peng's Makefile fix [2] as
otherwise, it may not quite generate all binman artefacts in the right
order as discussed here [3].

[1] https://developer.toradex.com/verdin-sample-phase-over
[2] https://marc.info/?l=u-boot&m=162908373904742
[3] https://marc.info/?l=u-boot&m=162945614207220

Changes in v3:
- Case fold hex string.
- Revert binman part of imx8mm-verdin-u-boot.dtsi to a plain copy from
  imx8mm-evk and postpone further improvements to after migrating to a
  common binman config as agreed with Frieder and Simon.
- New patch cleaning up include order.
- Add Fabio's reviewed-by tag.
- Fix patch.
- Add missing apalis-imx8 part.
- While at it update copyright year resp. period.
- Fix closing endif comment.

Changes in v2:
- Explicitly pass filename to binman when generating binaries as
  suggested by Heiko.
- Use proper intermediate binary u-boot-spl-ddr.bin for imximage as
  pointed out by Heiko.
- Drop first patch ("imx: mkimage_fit_atf: fix legacy image generation")
  as a similar fix was already refused earlier.
- New patch allows booting recent embedded Linux BSPs.
- New patch addressing dynamic fdtfile definition.
- New patch fixing watchdog pinctrl issue.

Igor Opaniuk (1):
  verdin-imx8mm: use preboot for fdtfile evaluation

Marcel Ziswiler (6):
  imx8m: clean-up kconfig indentation
  verdin-imx8mm: fix ethernet
  ARM: dts: imx8mm-verdin: prepare for dek blob encapsulation
  verdin-imx8mm: switch to use binman to pack images
  verdin-imx8mm: clean-up include order
  verdin-imx8mm: fix watchdog pinctrl issue

Max Krummenacher (2):
  verdin-imx8mm: enable sleep_moci output
  verdin-imx8mm: drop support for v1.0 hardware

Oleksandr Suvorov (1):
  include/configs: apalis-imx8/verdin-imx8mm: rename kernel image
    variable

 arch/arm/dts/imx8mm-verdin-u-boot.dtsi      | 135 +++++++++++++++++++-
 arch/arm/dts/imx8mm-verdin.dts              |  20 ++-
 arch/arm/mach-imx/imx8m/Kconfig             |  21 +--
 board/toradex/verdin-imx8mm/imximage.cfg    |  11 +-
 board/toradex/verdin-imx8mm/verdin-imx8mm.c |  81 +-----------
 configs/verdin-imx8mm_defconfig             |   6 +-
 doc/board/toradex/verdin-imx8mm.rst         |  53 ++++----
 include/configs/apalis-imx8.h               |   6 +-
 include/configs/verdin-imx8mm.h             |  11 +-
 9 files changed, 215 insertions(+), 129 deletions(-)

-- 
2.26.2