[PATCH 0/4] xilinx: Add RTC support for Xilinx ZynqMP

[Michal Simek]

čt 29. 7. 2021 v 13:36 odesílatel Michal Simek <michal.simek at xilinx.com> napsal:
>
> Hi,
>
> this series is correcting RTC uclass behavior to match RTC aliases to
> enable RTC_EMULATION driver with ZYNQMP driver. If DT node is present
> ZynqMP RTC is used. If not RTC emaulation is used.
>
> The driver has been tested on Xilinx zcu104 also with booting to Linux to
> make sure that U-Boot format match with Linux format.
>
> Thanks,
> Michal
>
>
> Michal Simek (4):
>   dm: rtc: uclass: Add flag to control sequence numbering
>   cmd: date: rtc: Update command to read the first RTC with seq 0
>   rtc: zynqmp: Add support for ZynqMP RTC
>   xilinx: zynqmp: Enable CMD_RTC command with Zynqmp RTC driver
>
>  MAINTAINERS                          |   1 +
>  cmd/date.c                           |   9 +-
>  configs/xilinx_zynqmp_virt_defconfig |   2 +
>  drivers/rtc/Kconfig                  |   7 ++
>  drivers/rtc/Makefile                 |   1 +
>  drivers/rtc/rtc-uclass.c             |   1 +
>  drivers/rtc/zynqmp_rtc.c             | 158 +++++++++++++++++++++++++++
>  7 files changed, 176 insertions(+), 3 deletions(-)
>  create mode 100644 drivers/rtc/zynqmp_rtc.c
>
> --
> 2.32.0
>

Applied.
M


-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs