[PATCH v1] imx: mkimage_fit_atf: replace @ with hyphen

Fabio Estevam festevam at gmail.com
Fri Aug 13 15:03:00 CEST 2021


Hi Heiko,

On Fri, Aug 13, 2021 at 9:53 AM Heiko Thiery <heiko.thiery at gmail.com> wrote:

> Maybe I'm wrong or I do not fully understand the limitation you're
> talking about, but as far as I understand the output (flash.bin) from
> the ronetix board [1] was generated using binman and includes all
> necessary parts. Is this right?

Building the imx8mq_cm_defconfig generates flash.bin + u-boot.itb.

If you only flash flash.bin, then you don't have a bootable system as
flash.bin contains only the SPL part.

Prior to using binman, we could boot the i.MX8M boards by flashing
only flash.bin.

I would like to preserver the pre-U-Boot 2021.07, where only flash.bin
was needed.




>
> [1] https://source.denx.de/u-boot/u-boot/-/blob/master/arch/arm/dts/imx8mq-cm-u-boot.dtsi
>
>
> --
> Heiko


More information about the U-Boot mailing list