Broken CONFIG_SPL_SATA_SUPPORT=y

[Simon Glass]

Hi Pali,

On Mon, 2 Aug 2021 at 15:09, Pali Rohár <pali at kernel.org> wrote:
>
> On Monday 02 August 2021 16:55:34 Tom Rini wrote:
> > On Sun, Aug 01, 2021 at 02:25:16PM +0200, Pali Rohár wrote:
> >
> > > Hello!
> > >
> > > Option CONFIG_SPL_SATA_SUPPORT=y is currently broken in u-boot master
> > > branch. If I try to enable it for A38x platform I'm getting following
> > > compiler error:
> > >
> > >     LD      spl/u-boot-spl
> > >   arm-linux-gnueabihf-ld.bfd: drivers/ata/ahci.o: in function `ahci_probe_scsi_pci':
> > >   drivers/ata/ahci.c:1205: undefined reference to `dm_pci_map_bar'
> > >   arm-linux-gnueabihf-ld.bfd: drivers/ata/ahci.c:1215: undefined reference to `dm_pci_read_config16'
> > >   arm-linux-gnueabihf-ld.bfd: drivers/ata/ahci.c:1216: undefined reference to `dm_pci_read_config16'
> > >   arm-linux-gnueabihf-ld.bfd: drivers/ata/ahci.c:1220: undefined reference to `dm_pci_map_bar'
> > >   make[1]: *** [scripts/Makefile.spl:512: spl/u-boot-spl] Error 1
> > >   make: *** [Makefile:1977: spl/u-boot-spl] Error 2
> > >
> > > You can reproduce it by running following commands:
> > >
> > >   $ make turris_omnia_defconfig
> > >   $ echo CONFIG_SPL_SATA_SUPPORT=y >> .config
> > >   $ make CROSS_COMPILE=arm-linux-gnueabihf-
> > >
> > > I workaround it by following patch:
> > >
> > > diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
> > > index d4047c04f5d0..6bad72e4cfa4 100644
> > > --- a/drivers/ata/ahci.c
> > > +++ b/drivers/ata/ahci.c
> > > @@ -1196,7 +1196,7 @@ int ahci_probe_scsi(struct udevice *ahci_dev, ulong base)
> > >     return 0;
> > >  }
> > >
> > > -#ifdef CONFIG_DM_PCI
> > > +#if CONFIG_IS_ENABLED(DM_PCI)
> > >  int ahci_probe_scsi_pci(struct udevice *ahci_dev)
> > >  {
> > >     ulong base;
> > >
> > > It fixed this particular problem. So it looks like that CONFIG_DM_PCI is
> > > defined also when building SPL even when it is not enabled for SPL.
> > > Whole PCI is disabled in SPL.
> > >
> > > But then I got another compile error:
> > >
> > >     LD      spl/u-boot-spl
> > >   arm-linux-gnueabihf-ld.bfd: drivers/ata/ahci-pci.o: in function `ahci_pci_probe':
> > >   drivers/ata/ahci-pci.c:21: undefined reference to `ahci_probe_scsi_pci'
> > >   make[1]: *** [scripts/Makefile.spl:512: spl/u-boot-spl] Error 1
> > >   make: *** [Makefile:1977: spl/u-boot-spl] Error 2
> > >
> > > Seems that u-boot is trying to compile and link ahci-pci.o into SPL
> > > binary even when it is not enabled nor used. PCI is completed disabled
> > > in SPL for this case.
> > >
> > > I workaround it by putting whole ahci-pci.c file into one big #idef:
> > >
> > > diff --git a/drivers/ata/ahci-pci.c b/drivers/ata/ahci-pci.c
> > > index b1d231e0f9e1..34afebd2f87f 100644
> > > --- a/drivers/ata/ahci-pci.c
> > > +++ b/drivers/ata/ahci-pci.c
> > > @@ -9,6 +9,8 @@
> > >  #include <dm.h>
> > >  #include <pci.h>
> > >
> > > +#if CONFIG_IS_ENABLED(DM_PCI)
> > > +
> > >  static int ahci_pci_bind(struct udevice *dev)
> > >  {
> > >     struct udevice *scsi_dev;
> > > @@ -42,3 +44,5 @@ static struct pci_device_id ahci_pci_supported[] = {
> > >  };
> > >
> > >  U_BOOT_PCI_DEVICE(ahci_pci, ahci_pci_supported);
> > > +
> > > +#endif
> > >
> > > And then finally U-Boot produced final target image u-boot-spl.kwb:
> > >
> > >   LD      spl/u-boot-spl
> > >   OBJCOPY spl/u-boot-spl-nodtb.bin
> > >   SYM     spl/u-boot-spl.sym
> > >   CAT     spl/u-boot-spl-dtb.bin
> > >   COPY    spl/u-boot-spl.bin
> > >   MKIMAGE u-boot-spl.kwb
> > >
> > > So this looks like a bug in Kconfig or Makefile dependences that build
> > > system is trying to compile and link also files which should not be
> > > linked at all.
> >
> > Yes, it's a missing dependency in Kconfig.  You need to enable SPL_DM
> > and then quite possibly SPL_OF_CONTROL (I forget if that was a hard
> > dependency on the main conversion or not) on the platform.
>
> CONFIG_SPL_DM=y is already enabled

CONFIG_SPL_PCI ?

It seems that pci-uclass.c is not being built for SPL.

Regards,
SImon