[PATCH 1/2] imx8mm-cl-iot-gate: Do not build fip.bin by default

Fabio Estevam festevam at denx.de
Fri Aug 13 14:15:17 CEST 2021


Hi Paul,

On 13/08/2021 06:59, Paul Liu wrote:
> Hi Fabio,
> 
> Can we think of a way to keep this fip.bin feature? This is part of
> the SystemReady IR certificate for this Compulab board. [1]
> 
> [1]
> https://developer.arm.com/architectures/system-architectures/arm-systemready/ir

i.MX8MM EVK is also listed there and we don't use fip.bin on this 
platform (and
not on any other i.MX8MM platform in mainline U-Boot).

If you really want to use fip.bin, could you please let me know the 
exact
build procedure for AT-F? Do you use mainline ATF?

As a user of the IOT-GATE-iMX8, I would just like to be able to flash 
mainline
U-Boot and move forward. Even better if I could use the same procedure
that has been used on other i.MX8MM boards.

Regards,

Fabio Estevam
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-60 Fax: (+49)-8142-66989-80 Email: 
festevam at denx.de


More information about the U-Boot mailing list